From: Jit Loon Lim <jit.loon.lim@intel.com>
To: u-boot@lists.denx.de
Cc: Jagan Teki <jagan@amarulasolutions.com>,
Vignesh R <vigneshr@ti.com>, Marek <marex@denx.de>,
Simon <simon.k.r.goldschmidt@gmail.com>,
Tien Fong <tien.fong.chee@intel.com>,
Kok Kiang <kok.kiang.hea@intel.com>,
Siew Chin <elly.siew.chin.lim@intel.com>,
Sin Hui <sin.hui.kho@intel.com>, Raaj <raaj.lokanathan@intel.com>,
Dinesh <dinesh.maniyam@intel.com>,
Boon Khai <boon.khai.ng@intel.com>,
Alif <alif.zakuan.yuslaimi@intel.com>,
Teik Heng <teik.heng.chong@intel.com>,
Hazim <muhammad.hazim.izzat.zamri@intel.com>,
Jit Loon Lim <jit.loon.lim@intel.com>,
Sieu Mun Tang <sieu.mun.tang@intel.com>
Subject: [PATCH 8/9] configs: dm: Add Diamond Mesa CONFIGs
Date: Sun, 18 Sep 2022 20:17:50 +0800 [thread overview]
Message-ID: <20220918121751.26370-8-jit.loon.lim@intel.com> (raw)
In-Reply-To: <20220918121751.26370-1-jit.loon.lim@intel.com>
From: Siew Chin Lim <elly.siew.chin.lim@intel.com>
Add CONFIGs for Diamond Mesa.
Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
---
include/configs/socfpga_dm_socdk.h | 50 ++++++++++++++++++++++++++++++
1 file changed, 50 insertions(+)
create mode 100644 include/configs/socfpga_dm_socdk.h
diff --git a/include/configs/socfpga_dm_socdk.h b/include/configs/socfpga_dm_socdk.h
new file mode 100644
index 0000000000..0adcbfd97e
--- /dev/null
+++ b/include/configs/socfpga_dm_socdk.h
@@ -0,0 +1,50 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2020 Intel Corporation <www.intel.com>
+ *
+ */
+
+#ifndef __CONFIG_SOCFGPA_DM_H__
+#define __CONFIG_SOCFGPA_DM_H__
+
+#include <configs/socfpga_soc64_common.h>
+
+#undef CONFIG_BOOTARGS
+#ifdef CONFIG_SOCFPGA_SECURE_VAB_AUTH
+#define CONFIG_BOOTARGS "earlycon panic=-1 mem=2048M"
+#else
+#define CONFIG_BOOTARGS "earlycon panic=-1 earlyprintk=ttyS0,4800"
+#endif
+
+#undef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+ "bootfile=" CONFIG_BOOTFILE "\0" \
+ "fdt_addr=1100000\0" \
+ "fdtimage=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
+ "mmcroot=/dev/mmcblk0p2\0" \
+ "mmcboot=setenv bootargs " CONFIG_BOOTARGS \
+ " root=${mmcroot} rw rootwait;" \
+ "booti ${loadaddr} - ${fdt_addr}\0" \
+ "mmcload=mmc rescan;" \
+ "load mmc 0:1 ${loadaddr} ${bootfile};" \
+ "load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \
+ "mmcfitboot=setenv bootargs " CONFIG_BOOTARGS \
+ " root=${mmcroot} rw rootwait;" \
+ "bootm ${loadaddr}\0" \
+ "mmcfitload=mmc rescan;" \
+ "load mmc 0:1 ${loadaddr} ${bootfile}\0" \
+ "ramboot=setenv bootargs " CONFIG_BOOTARGS";" \
+ "booti ${loadaddr} - ${fdt_addr}\0" \
+ "linux_qspi_enable=if sf probe; then " \
+ "echo Enabling QSPI at Linux DTB...;" \
+ "fdt addr ${fdt_addr}; fdt resize;" \
+ "fdt set /soc/spi@ff8d2000 status okay;" \
+ "fdt set /soc/clkmgr/clocks/qspi_clk clock-frequency " \
+ " ${qspi_clock}; fi; \0" \
+ "scriptaddr=0x02100000\0" \
+ "scriptfile=u-boot.scr\0" \
+ "fatscript=if fatload mmc 0:1 ${scriptaddr} ${scriptfile};" \
+ "then source ${scriptaddr}; fi\0"
+
+#endif /* __CONFIG_SOCFGPA_DM_H__ */
--
2.26.2
next prev parent reply other threads:[~2022-09-18 12:19 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-18 12:17 [PATCH 1/9] drivers: clk: dm: Add clock driver for Diamond Mesa Jit Loon Lim
2022-09-18 12:17 ` [PATCH 2/9] drivers: clk: dm: Add memory " Jit Loon Lim
2022-09-18 12:17 ` [PATCH 3/9] arm: socfpga: dm: Add clock manager " Jit Loon Lim
2022-09-18 12:17 ` [PATCH 4/9] ddr: altera: dm: Add SDRAM driver " Jit Loon Lim
2022-09-18 12:17 ` [PATCH 5/9] arm: socfpga: dm: Add SPL " Jit Loon Lim
2022-09-18 12:17 ` [PATCH 6/9] board: intel: dm: Add socdk board support " Jit Loon Lim
2022-09-18 12:17 ` [PATCH 7/9] arm: dts: dm: Add base dtsi and devkit dts " Jit Loon Lim
2022-09-18 12:17 ` Jit Loon Lim [this message]
2022-09-18 12:17 ` [PATCH 9/9] arm: socfpga: dm: Enable Intel Diamond Mesa bulid Jit Loon Lim
2022-09-28 17:14 ` [PATCH 1/9] drivers: clk: dm: Add clock driver for Diamond Mesa Sean Anderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220918121751.26370-8-jit.loon.lim@intel.com \
--to=jit.loon.lim@intel.com \
--cc=alif.zakuan.yuslaimi@intel.com \
--cc=boon.khai.ng@intel.com \
--cc=dinesh.maniyam@intel.com \
--cc=elly.siew.chin.lim@intel.com \
--cc=jagan@amarulasolutions.com \
--cc=kok.kiang.hea@intel.com \
--cc=marex@denx.de \
--cc=muhammad.hazim.izzat.zamri@intel.com \
--cc=raaj.lokanathan@intel.com \
--cc=sieu.mun.tang@intel.com \
--cc=simon.k.r.goldschmidt@gmail.com \
--cc=sin.hui.kho@intel.com \
--cc=teik.heng.chong@intel.com \
--cc=tien.fong.chee@intel.com \
--cc=u-boot@lists.denx.de \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox