[PATCH] arm: dts: imx8mn-beacon-kit-u-boot: Fix broken booting

[sbabic@denx.de]

> When the imx8mm.dtsi file was pulled in from Linux, the UARTs
> were moved into an spba sub-node which wasn't being included
> in the SPL device tree.  This meant the references to the UART
> weren't being handled properly and when booting the system would
> constantly reboot.  Fix this by adding the spba node to the spl
> device tree to restore normal booting.
> Fixes: 4e5114daf9eb ("imx8mn: synchronise device tree with linux")
> Signed-off-by: Adam Ford <aford173@gmail.com>
> diff --git a/arch/arm/dts/imx8mn-beacon-kit-u-boot.dtsi b/arch/arm/dts/imx8mn-beacon-kit-u-boot.dtsi
> index 5f83952402..0efa6862eb 100644
> --- a/arch/arm/dts/imx8mn-beacon-kit-u-boot.dtsi
> +++ b/arch/arm/dts/imx8mn-beacon-kit-u-boot.dtsi
> @@ -106,6 +106,10 @@
>  	u-boot,off-on-delay-us = <20000>;
>  };
>  
> +&spba1 {
> +	u-boot,dm-spl;
> +};
> +
>  &uart2 {
>  	u-boot,dm-spl;
>  };
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================