[PATCH 1/2] board: tbs2910: Set all board dts files as maintained

[PATCH 1/2] board: tbs2910: Set all board dts files as maintained

[Soeren Moch]

This also includes the imx6q-tbs2910-u-boot.dtsi file now.

Signed-off-by: Soeren Moch <smoch@web.de>
---
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: "NXP i.MX U-Boot Team" <uboot-imx@nxp.com>
Cc: u-boot@lists.denx.de
---
 board/tbs/tbs2910/MAINTAINERS | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/board/tbs/tbs2910/MAINTAINERS b/board/tbs/tbs2910/MAINTAINERS
index 1e3c0d0ece..72f98d1a69 100644
--- a/board/tbs/tbs2910/MAINTAINERS
+++ b/board/tbs/tbs2910/MAINTAINERS
@@ -1,7 +1,7 @@
 TBS2910 BOARD
 M:	Soeren Moch <smoch@web.de>
 S:	Maintained
-F:	arch/arm/dts/imx6q-tbs2910.dts
+F:	arch/arm/dts/imx6q-tbs2910*
 F:	board/tbs/tbs2910/
 F:	configs/tbs2910_defconfig
 F:	doc/board/tbs/
--
2.34.1

[PATCH 2/2] board: tbs2910: Add serial rx buffer in defconfig

[Soeren Moch]

... to avoid loosing characters when pasting text into the serial console.
This allows to remove the workaround to disable the vidconsole output
when no HDMI device is detected. This workaround only was there to speed-up
serial console processing.

Signed-off-by: Soeren Moch <smoch@web.de>
---
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: "NXP i.MX U-Boot Team" <uboot-imx@nxp.com>
Cc: u-boot@lists.denx.de
---
 configs/tbs2910_defconfig | 3 ++-
 include/configs/tbs2910.h | 4 ----
 2 files changed, 2 insertions(+), 5 deletions(-)

diff --git a/configs/tbs2910_defconfig b/configs/tbs2910_defconfig
index 59444372e9..20de590e27 100644
--- a/configs/tbs2910_defconfig
+++ b/configs/tbs2910_defconfig
@@ -24,7 +24,7 @@ CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="mmc rescan; if run bootcmd_up1; then run bootcmd_up2; else run bootcmd_mmc || run distro_bootcmd; fi"
 CONFIG_USE_PREBOOT=y
-CONFIG_PREBOOT="echo PCI:; pci enum; pci 1; usb start; if hdmidet; then run set_con_hdmi; else run set_con_serial; fi"
+CONFIG_PREBOOT="echo PCI:; pci enum; pci 1; usb start"
 CONFIG_DEFAULT_FDT_FILE="imx6q-tbs2910.dtb"
 CONFIG_PRE_CONSOLE_BUFFER=y
 CONFIG_HUSH_PARSER=y
@@ -89,6 +89,7 @@ CONFIG_PINCTRL_IMX6=y
 CONFIG_DM_RTC=y
 CONFIG_RTC_DS1307=y
 CONFIG_DM_SERIAL=y
+CONFIG_SERIAL_RX_BUFFER=y
 CONFIG_MXC_UART=y
 CONFIG_DM_THERMAL=y
 CONFIG_IMX_THERMAL=y
diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h
index c93df00d58..7f197851d0 100644
--- a/include/configs/tbs2910.h
+++ b/include/configs/tbs2910.h
@@ -61,10 +61,6 @@
 	"pxefile_addr_r=0x10100000\0" \
 	"ramdisk_addr_r=0x18080000\0" \
 	"scriptaddr=0x10000000\0" \
-	"set_con_serial=setenv stdout serial; " \
-			"setenv stderr serial\0" \
-	"set_con_hdmi=setenv stdout serial,vidconsole; " \
-			"setenv stderr serial,vidconsole\0" \
 	"stderr=serial,vidconsole\0" \
 	"stdin=serial,usbkbd\0" \
 	"stdout=serial,vidconsole\0"
--
2.34.1

Re: [PATCH 2/2] board: tbs2910: Add serial rx buffer in defconfig

[Fabio Estevam]

On Tue, Sep 20, 2022 at 1:05 PM Soeren Moch <smoch@web.de> wrote:
>
> ... to avoid loosing characters when pasting text into the serial console.
> This allows to remove the workaround to disable the vidconsole output
> when no HDMI device is detected. This workaround only was there to speed-up
> serial console processing.
>
> Signed-off-by: Soeren Moch <smoch@web.de>

Reviewed-by: Fabio Estevam <festevam@denx.de>

Re: [PATCH 2/2] board: tbs2910: Add serial rx buffer in defconfig

[Soeren Moch]

On 20.09.22 20:44, Fabio Estevam wrote:
> On Tue, Sep 20, 2022 at 1:05 PM Soeren Moch <smoch@web.de> wrote:
>> ... to avoid loosing characters when pasting text into the serial console.
>> This allows to remove the workaround to disable the vidconsole output
>> when no HDMI device is detected. This workaround only was there to speed-up
>> serial console processing.
>>
>> Signed-off-by: Soeren Moch <smoch@web.de>
> Reviewed-by: Fabio Estevam <festevam@denx.de>
Thanks, Fabio!

I forgot to mention: This is not urgent. It is totally fine to queue
this series for -next.

Thanks,
Soeren

[PATCH 2/2] board: tbs2910: Add serial rx buffer in defconfig

[sbabic]

> ... to avoid loosing characters when pasting text into the serial console.
> This allows to remove the workaround to disable the vidconsole output
> when no HDMI device is detected. This workaround only was there to speed-up
> serial console processing.
> Signed-off-by: Soeren Moch <smoch@web.de>
> Reviewed-by: Fabio Estevam <festevam@denx.de>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================

Re: [PATCH 1/2] board: tbs2910: Set all board dts files as maintained

[Fabio Estevam]

On Tue, Sep 20, 2022 at 1:05 PM Soeren Moch <smoch@web.de> wrote:
>
> This also includes the imx6q-tbs2910-u-boot.dtsi file now.
>
> Signed-off-by: Soeren Moch <smoch@web.de>

Reviewed-by: Fabio Estevam <festevam@denx.de>

[PATCH 1/2] board: tbs2910: Set all board dts files as maintained

[sbabic]

> This also includes the imx6q-tbs2910-u-boot.dtsi file now.
> Signed-off-by: Soeren Moch <smoch@web.de>
> Reviewed-by: Fabio Estevam <festevam@denx.de>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================