From: Chris Packham <judge.packham@gmail.com>
To: Stefan Roese <sr@denx.de>
Cc: "Vadym Kochan" <vadym.kochan@plvision.eu>,
"Elad Nachman" <enachman@marvell.com>,
"Chris Packham" <judge.packham@gmail.com>,
"Adam Ford" <aford173@gmail.com>, "Alice Guo" <alice.guo@nxp.com>,
"Amjad Ouled-Ameur" <aouledameur@baylibre.com>,
"Andre Przywara" <andre.przywara@arm.com>,
"Chris Packham" <chris.packham@alliedtelesis.co.nz>,
"Christian Hewitt" <christianshewitt@gmail.com>,
"Fabio Estevam" <festevam@denx.de>,
"Jim Liu" <jim.t90615@gmail.com>,
"Joe Hershberger" <joe.hershberger@ni.com>,
"Lukasz Majewski" <lukma@denx.de>,
"Marcel Ziswiler" <marcel.ziswiler@toradex.com>,
"Marek Behún" <kabel@kernel.org>, "Marek Vasut" <marex@denx.de>,
"Michael Scott" <mike@foundries.io>,
"Pali Rohár" <pali@kernel.org>, "Peng Fan" <peng.fan@nxp.com>,
"Priyanka Jain" <priyanka.jain@nxp.com>,
"Ramon Fried" <rfried.dev@gmail.com>,
"Samuel Holland" <samuel@sholland.org>,
"Sean Anderson" <sean.anderson@seco.com>,
"Simon Glass" <sjg@chromium.org>,
"Tim Harvey" <tharvey@gateworks.com>,
"Tom Rini" <trini@konsulko.com>,
"Weijie Gao" <weijie.gao@mediatek.com>, "Ye Li" <ye.li@nxp.com>,
"Ying-Chun Liu (PaulLiu)" <paul.liu@linaro.org>,
u-boot@lists.denx.de
Subject: [PATCH v3 0/6] arm: mvebu: Support for 98DX25xx/98DX35xx (AlleyCat5)
Date: Wed, 21 Sep 2022 16:59:35 +1200 [thread overview]
Message-ID: <20220921045941.571980-1-judge.packham@gmail.com> (raw)
These patches are based on Marvell's bootloader for the AlleyCat5/5X
which was based on u-boot 2018.03. I've split that code into consumable
chunks and dropped as much unnecessary stuff as I can. I've also tried
to sync the device trees as much as possible with the support that will
land in Linux 6.0 although there are still some differences
Changes in v3:
- Remove unnecessary changes to RX descriptor handling
- Use dev_get_dma_range() to parse dma-ranges property from parent
device.
- None. Note some changes related to this have been requested and will
be looked into I just wanted to get v3 out so the other changes could
be reviewed.
- Remove unnecessary dma-ranges property from ethernet nodes (mvneta now
correctly parses the property from the parent node).
- Keep soc_print_clock_info and soc_print_device_info local to
alleycat5.
- Remove MMC and UBIFS distroboot options (MMC driver is not currently
functional, NAND is not populated on the RD-AC5X board)
- Remove unnecessary Ethernet configuration
- Remove unnecessary NAND configuration
- Remove memory node from dts so the value passed by the DDR FW will be
used
Changes in v2:
- Use distro boot by default
- remove unnecessary SPI-NOR partitions
Chris Packham (6):
net: mvneta: Add support for AlleyCat5
usb: ehci: ehci-marvell: Support for marvell,ac5-ehci
pinctrl: mvebu: Add AlleyCat5 support
misc: mvebu: Add sample at reset driver
arm: mvebu: Support for 98DX25xx/98DX35xx SoC
arm: mvebu: Add RD-AC5X board
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/ac5-98dx25xx.dtsi | 290 +++++++++++++++++++++
arch/arm/dts/ac5-98dx35xx-rd.dts | 135 ++++++++++
arch/arm/dts/ac5-98dx35xx.dtsi | 17 ++
arch/arm/mach-mvebu/Kconfig | 13 +-
arch/arm/mach-mvebu/Makefile | 1 +
arch/arm/mach-mvebu/alleycat5/Makefile | 9 +
arch/arm/mach-mvebu/alleycat5/clock.c | 49 ++++
arch/arm/mach-mvebu/alleycat5/clock.h | 11 +
arch/arm/mach-mvebu/alleycat5/cpu.c | 129 +++++++++
arch/arm/mach-mvebu/alleycat5/soc.c | 229 ++++++++++++++++
arch/arm/mach-mvebu/alleycat5/soc.h | 6 +
arch/arm/mach-mvebu/arm64-common.c | 5 +
arch/arm/mach-mvebu/include/mach/cpu.h | 4 +
board/Marvell/mvebu_alleycat-5/MAINTAINERS | 6 +
board/Marvell/mvebu_alleycat-5/Makefile | 3 +
board/Marvell/mvebu_alleycat-5/board.c | 35 +++
configs/mvebu_ac5_rd_defconfig | 88 +++++++
drivers/misc/Kconfig | 6 +
drivers/misc/Makefile | 1 +
drivers/misc/mvebu_sar/Makefile | 4 +
drivers/misc/mvebu_sar/ac5_sar.c | 119 +++++++++
drivers/misc/mvebu_sar/sar-uclass.c | 146 +++++++++++
drivers/net/Kconfig | 2 +-
drivers/net/mvneta.c | 43 ++-
drivers/pinctrl/mvebu/Kconfig | 2 +-
drivers/usb/host/Kconfig | 1 +
drivers/usb/host/ehci-marvell.c | 57 +++-
include/configs/mvebu_alleycat-5.h | 57 ++++
include/dm/uclass-id.h | 1 +
include/fdtdec.h | 4 +
include/mvebu/mvebu_chip_sar.h | 73 ++++++
include/mvebu/sar.h | 57 ++++
include/mvebu/var.h | 28 ++
include/sar-uclass.h | 23 ++
lib/fdtdec.c | 6 +-
36 files changed, 1647 insertions(+), 16 deletions(-)
create mode 100644 arch/arm/dts/ac5-98dx25xx.dtsi
create mode 100644 arch/arm/dts/ac5-98dx35xx-rd.dts
create mode 100644 arch/arm/dts/ac5-98dx35xx.dtsi
create mode 100644 arch/arm/mach-mvebu/alleycat5/Makefile
create mode 100644 arch/arm/mach-mvebu/alleycat5/clock.c
create mode 100644 arch/arm/mach-mvebu/alleycat5/clock.h
create mode 100644 arch/arm/mach-mvebu/alleycat5/cpu.c
create mode 100644 arch/arm/mach-mvebu/alleycat5/soc.c
create mode 100644 arch/arm/mach-mvebu/alleycat5/soc.h
create mode 100644 board/Marvell/mvebu_alleycat-5/MAINTAINERS
create mode 100644 board/Marvell/mvebu_alleycat-5/Makefile
create mode 100644 board/Marvell/mvebu_alleycat-5/board.c
create mode 100644 configs/mvebu_ac5_rd_defconfig
create mode 100644 drivers/misc/mvebu_sar/Makefile
create mode 100644 drivers/misc/mvebu_sar/ac5_sar.c
create mode 100644 drivers/misc/mvebu_sar/sar-uclass.c
create mode 100644 include/configs/mvebu_alleycat-5.h
create mode 100644 include/mvebu/mvebu_chip_sar.h
create mode 100644 include/mvebu/sar.h
create mode 100644 include/mvebu/var.h
create mode 100644 include/sar-uclass.h
--
2.37.3
next reply other threads:[~2022-09-21 5:00 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-21 4:59 Chris Packham [this message]
2022-09-21 4:59 ` [PATCH v3 1/6] net: mvneta: Add support for AlleyCat5 Chris Packham
2022-09-21 6:00 ` Stefan Roese
2022-10-05 2:02 ` Ramon Fried
2022-09-21 4:59 ` [PATCH v3 2/6] usb: ehci: ehci-marvell: Support for marvell,ac5-ehci Chris Packham
2022-09-21 4:59 ` [PATCH v3 3/6] pinctrl: mvebu: Add AlleyCat5 support Chris Packham
2022-09-21 5:59 ` Stefan Roese
2022-09-21 4:59 ` [PATCH v3 4/6] misc: mvebu: Add sample at reset driver Chris Packham
2022-09-21 4:59 ` [PATCH v3 5/6] arm: mvebu: Support for 98DX25xx/98DX35xx SoC Chris Packham
2022-09-21 5:58 ` Stefan Roese
2022-09-21 21:05 ` Chris Packham
2022-09-21 21:25 ` Chris Packham
2022-09-21 21:40 ` Pali Rohár
2022-09-21 21:55 ` Chris Packham
2022-09-21 22:12 ` Pali Rohár
2022-09-21 4:59 ` [PATCH v3 6/6] arm: mvebu: Add RD-AC5X board Chris Packham
2022-09-21 5:30 ` Stefan Roese
2022-09-21 21:54 ` Pali Rohár
2022-09-21 23:08 ` Chris Packham
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220921045941.571980-1-judge.packham@gmail.com \
--to=judge.packham@gmail.com \
--cc=aford173@gmail.com \
--cc=alice.guo@nxp.com \
--cc=andre.przywara@arm.com \
--cc=aouledameur@baylibre.com \
--cc=chris.packham@alliedtelesis.co.nz \
--cc=christianshewitt@gmail.com \
--cc=enachman@marvell.com \
--cc=festevam@denx.de \
--cc=jim.t90615@gmail.com \
--cc=joe.hershberger@ni.com \
--cc=kabel@kernel.org \
--cc=lukma@denx.de \
--cc=marcel.ziswiler@toradex.com \
--cc=marex@denx.de \
--cc=mike@foundries.io \
--cc=pali@kernel.org \
--cc=paul.liu@linaro.org \
--cc=peng.fan@nxp.com \
--cc=priyanka.jain@nxp.com \
--cc=rfried.dev@gmail.com \
--cc=samuel@sholland.org \
--cc=sean.anderson@seco.com \
--cc=sjg@chromium.org \
--cc=sr@denx.de \
--cc=tharvey@gateworks.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=vadym.kochan@plvision.eu \
--cc=weijie.gao@mediatek.com \
--cc=ye.li@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox