From: Roger Quadros <rogerq@kernel.org>
To: dario.binacchi@amarulasolutions.com,
michael@amarulasolutions.com, trini@konsulko.com
Cc: u-boot@lists.denx.de, Roger Quadros <rogerq@kernel.org>
Subject: [u-boot][PATCH 08/14] mtd: rawnand: omap_gpmc: Reduce .bss usage
Date: Tue, 11 Oct 2022 14:50:06 +0300 [thread overview]
Message-ID: <20221011115012.6181-9-rogerq@kernel.org> (raw)
In-Reply-To: <20221011115012.6181-1-rogerq@kernel.org>
Allocate omap_ecclayout on the heap as we have
limited .bss space on AM64 R5 SPL configuration.
Reduces .bss usage by 2984 bytes.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
---
drivers/mtd/nand/raw/omap_gpmc.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/mtd/nand/raw/omap_gpmc.c b/drivers/mtd/nand/raw/omap_gpmc.c
index b5ad66ad49..e772a914c8 100644
--- a/drivers/mtd/nand/raw/omap_gpmc.c
+++ b/drivers/mtd/nand/raw/omap_gpmc.c
@@ -40,7 +40,6 @@ static u8 bch8_polynomial[] = {0xef, 0x51, 0x2e, 0x09, 0xed, 0x93, 0x9a, 0xc2,
0x97, 0x79, 0xe5, 0x24, 0xb5};
#endif
static uint8_t cs_next;
-static __maybe_unused struct nand_ecclayout omap_ecclayout;
#if defined(CONFIG_NAND_OMAP_GPMC_WSCFG)
static const int8_t wscfg[CONFIG_SYS_MAX_NAND_DEVICE] =
@@ -874,7 +873,7 @@ static void __maybe_unused omap_free_bch(struct mtd_info *mtd)
static int omap_select_ecc_scheme(struct nand_chip *nand,
enum omap_ecc ecc_scheme, unsigned int pagesize, unsigned int oobsize) {
struct omap_nand_info *info = nand_get_controller_data(nand);
- struct nand_ecclayout *ecclayout = &omap_ecclayout;
+ struct nand_ecclayout *ecclayout = nand->ecc.layout;
int eccsteps = pagesize / SECTOR_BYTES;
int i;
@@ -1167,7 +1166,9 @@ int board_nand_init(struct nand_chip *nand)
nand->cmd_ctrl = omap_nand_hwcontrol;
nand->options |= NAND_NO_PADDING | NAND_CACHEPRG;
nand->chip_delay = 100;
- nand->ecc.layout = &omap_ecclayout;
+ nand->ecc.layout = kzalloc(sizeof(*nand->ecc.layout), GFP_KERNEL);
+ if (!nand->ecc.layout)
+ return -ENOMEM;
/* configure driver and controller based on NAND device bus-width */
gpmc_config = readl(&gpmc_cfg->cs[cs].config1);
--
2.17.1
next prev parent reply other threads:[~2022-10-11 11:52 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-11 11:49 [u-boot][PATCH 00/14] rawnand: omap_gpmc: driver model support Roger Quadros
2022-10-11 11:49 ` [u-boot][PATCH 01/14] mtd: rawnand: omap_gpmc: Deprecate asm/arch/mem.h Roger Quadros
2022-10-12 10:01 ` Michael Nazzareno Trimarchi
2022-10-11 11:50 ` [u-boot][PATCH 02/14] mtd: rawnand: omap_gpmc: Enable build for K2/K3 platforms Roger Quadros
2022-10-12 11:49 ` Michael Nazzareno Trimarchi
2022-10-11 11:50 ` [u-boot][PATCH 03/14] mtd: rawnand: omap_gpmc: Fix build warning on 64-bit platforms Roger Quadros
2022-10-15 5:53 ` Michael Nazzareno Trimarchi
2022-10-11 11:50 ` [u-boot][PATCH 04/14] mtd: rawnand: omap_gpmc: Optimize NAND reads Roger Quadros
2022-10-15 7:24 ` Michael Nazzareno Trimarchi
2022-10-15 13:29 ` Roger Quadros
2022-10-17 6:39 ` Michael Nazzareno Trimarchi
2022-10-17 8:14 ` Roger Quadros
2022-10-11 11:50 ` [u-boot][PATCH 05/14] mtd: rawnand: omap_gpmc: Fix BCH6/16 HW based correction Roger Quadros
2022-11-28 14:03 ` Michael Nazzareno Trimarchi
2022-11-29 15:25 ` Dario Binacchi
2022-11-29 16:17 ` Tom Rini
2022-11-30 8:11 ` Dario Binacchi
2022-12-01 11:42 ` Roger Quadros
2022-10-11 11:50 ` [u-boot][PATCH 06/14] mtd: rawnand: nand_base: Allow base driver to be used in SPL without nand_bbt Roger Quadros
2022-11-28 14:27 ` Michael Nazzareno Trimarchi
2022-11-29 13:04 ` Roger Quadros
2022-10-11 11:50 ` [u-boot][PATCH 07/14] mtd: rawnand: nand_spl_loaders: Fix cast type build warning Roger Quadros
2022-11-06 19:50 ` Michael Nazzareno Trimarchi
2022-10-11 11:50 ` Roger Quadros [this message]
2022-11-28 14:11 ` [u-boot][PATCH 08/14] mtd: rawnand: omap_gpmc: Reduce .bss usage Michael Nazzareno Trimarchi
2022-10-11 11:50 ` [u-boot][PATCH 09/14] dt-bindings: mtd: Add ti, gpmc-nand DT binding documentation Roger Quadros
2022-10-11 11:50 ` [u-boot][PATCH 10/14] mtd: rawnand: omap_gpmc: support u-boot driver model Roger Quadros
2022-10-11 15:01 ` Adam Ford
2022-10-12 6:22 ` Roger Quadros
2022-10-12 11:42 ` Adam Ford
2022-10-12 11:57 ` Ladislav Michl
2022-10-12 12:02 ` Adam Ford
2022-10-13 11:17 ` Adam Ford
2022-10-13 19:42 ` Roger Quadros
2022-10-11 11:50 ` [u-boot][PATCH 11/14] mtd: rawnand: omap_gpmc: Add SPL NAND support Roger Quadros
2022-10-11 11:50 ` [u-boot][PATCH 12/14] mtd: rawnand: omap_gpmc: Enable SYS_NAND_PAGE_COUNT for OMAP_GPMC Roger Quadros
2022-10-11 11:50 ` [u-boot][PATCH 13/14] dt-bindings: mtd: Add ti, elm DT binding documentation Roger Quadros
2022-10-11 11:50 ` [u-boot][PATCH 14/14] mtd: rawnand: omap_elm: u-boot driver model support Roger Quadros
2022-11-04 13:27 ` [u-boot][PATCH 00/14] rawnand: omap_gpmc: " Roger Quadros
2022-11-08 9:26 ` Michael Nazzareno Trimarchi
2022-11-25 12:38 ` Roger Quadros
2022-12-11 13:56 ` Dario Binacchi
2022-12-12 9:12 ` Roger Quadros
2022-12-12 9:27 ` Dario Binacchi
2022-12-12 9:39 ` Michael Nazzareno Trimarchi
2022-12-17 13:00 ` Roger Quadros
2022-12-17 13:38 ` Michael Nazzareno Trimarchi
2022-12-17 13:43 ` Roger Quadros
2022-12-17 13:46 ` Michael Nazzareno Trimarchi
2022-12-17 13:51 ` Michael Nazzareno Trimarchi
2022-12-17 13:59 ` Roger Quadros
2022-12-17 14:09 ` Michael Nazzareno Trimarchi
2022-12-17 14:48 ` Michael Nazzareno Trimarchi
2022-12-12 13:58 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221011115012.6181-9-rogerq@kernel.org \
--to=rogerq@kernel.org \
--cc=dario.binacchi@amarulasolutions.com \
--cc=michael@amarulasolutions.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox