public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Adam Ford <aford173@gmail.com>
To: u-boot@lists.denx.de
Cc: Adam Ford <aford173@gmail.com>, Stefano Babic <sbabic@denx.de>,
	Fabio Estevam <festevam@gmail.com>,
	"NXP i.MX U-Boot Team" <uboot-imx@nxp.com>,
	"Ariel D'Alessandro" <ariel.dalessandro@collabora.com>,
	Michael Trimarchi <michael@amarulasolutions.com>,
	Tim Harvey <tharvey@gateworks.com>
Subject: [PATCH V2 4/7] arm: dts: imx8mn-ddr4-evk: Consolidate with imx8mn-u-boot
Date: Fri, 21 Oct 2022 19:58:34 -0500	[thread overview]
Message-ID: <20221022005837.170357-5-aford173@gmail.com> (raw)
In-Reply-To: <20221022005837.170357-1-aford173@gmail.com>

Now that a unified imx8mn-u-boot is available, remove duplicated
code for generating flash.bin and other common imx8mn peripherals.

Signed-off-by: Adam Ford <aford173@gmail.com>

diff --git a/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi b/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi
index 3fdb20cb35..54f3ebe88b 100644
--- a/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi
+++ b/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi
@@ -3,66 +3,7 @@
  * Copyright 2019, 2021 NXP
  */
 
-/ {
-	binman: binman {
-		multiple-images;
-	};
-
-	wdt-reboot {
-		compatible = "wdt-reboot";
-		wdt = <&wdog1>;
-		u-boot,dm-spl;
-	};
-	firmware {
-		optee {
-			compatible = "linaro,optee-tz";
-			method = "smc";
-		};
-	};
-};
-
-&{/soc@0} {
-	u-boot,dm-pre-reloc;
-	u-boot,dm-spl;
-};
-
-&spba1 {
-	u-boot,dm-spl;
-};
-
-&spba1 {
-	u-boot,dm-spl;
-};
-
-&clk {
-	u-boot,dm-spl;
-	u-boot,dm-pre-reloc;
-	/delete-property/ assigned-clocks;
-	/delete-property/ assigned-clock-parents;
-	/delete-property/ assigned-clock-rates;
-};
-
-&osc_24m {
-	u-boot,dm-spl;
-	u-boot,dm-pre-reloc;
-};
-
-&aips1 {
-	u-boot,dm-spl;
-	u-boot,dm-pre-reloc;
-};
-
-&aips2 {
-	u-boot,dm-spl;
-};
-
-&aips3 {
-	u-boot,dm-spl;
-};
-
-&iomuxc {
-	u-boot,dm-spl;
-};
+#include "imx8mn-u-boot.dtsi"
 
 &pinctrl_reg_usdhc2_vmmc {
 	u-boot,dm-spl;
@@ -147,130 +88,3 @@
 	mmc-hs400-1_8v;
 	mmc-hs400-enhanced-strobe;
 };
-
-&wdog1 {
-	u-boot,dm-spl;
-};
-
-&binman {
-	 u-boot-spl-ddr {
-		filename = "u-boot-spl-ddr.bin";
-		pad-byte = <0xff>;
-		align-size = <4>;
-		align = <4>;
-
-		u-boot-spl {
-			align-end = <4>;
-		};
-
-		ddr-1d-imem-fw {
-			filename = "ddr4_imem_1d_201810.bin";
-			type = "blob-ext";
-			align-end = <4>;
-		};
-
-		ddr-1d-dmem-fw {
-			filename = "ddr4_dmem_1d_201810.bin";
-			type = "blob-ext";
-			align-end = <4>;
-		};
-
-		ddr-2d-imem-fw {
-			filename = "ddr4_imem_2d_201810.bin";
-			type = "blob-ext";
-			align-end = <4>;
-		};
-
-		ddr-2d-dmem-fw {
-			filename = "ddr4_dmem_2d_201810.bin";
-			type = "blob-ext";
-			align-end = <4>;
-		};
-	};
-
-
-	spl {
-		filename = "spl.bin";
-
-		mkimage {
-			args = "-n spl/u-boot-spl.cfgout -T imx8mimage -e 0x912000";
-
-			blob {
-				filename = "u-boot-spl-ddr.bin";
-			};
-		};
-	};
-
-	itb {
-		filename = "u-boot.itb";
-
-		fit {
-			description = "Configuration to load ATF before U-Boot";
-			#address-cells = <1>;
-			fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
-
-			images {
-				uboot {
-					description = "U-Boot (64-bit)";
-					type = "standalone";
-					arch = "arm64";
-					compression = "none";
-					load = <CONFIG_SYS_TEXT_BASE>;
-
-					uboot_blob: blob-ext {
-						filename = "u-boot-nodtb.bin";
-					};
-				};
-
-				atf {
-					description = "ARM Trusted Firmware";
-					type = "firmware";
-					arch = "arm64";
-					compression = "none";
-					load = <0x960000>;
-					entry = <0x960000>;
-
-					atf_blob: blob-ext {
-						filename = "bl31.bin";
-					};
-				};
-
-				fdt {
-					description = "NAME";
-					type = "flat_dt";
-					compression = "none";
-
-					uboot_fdt_blob: blob-ext {
-						filename = "u-boot.dtb";
-					};
-				};
-			};
-
-			configurations {
-				default = "conf";
-
-				conf {
-					description = "NAME";
-					firmware = "uboot";
-					loadables = "atf";
-					fdt = "fdt";
-				};
-			};
-		};
-	};
-
-	imx-boot {
-		filename = "flash.bin";
-		pad-byte = <0x00>;
-
-		spl: blob-ext@1 {
-			offset = <0x0>;
-			filename = "spl.bin";
-		};
-
-		uboot: blob-ext@2 {
-			offset = <0x58000>;
-			filename = "u-boot.itb";
-		};
-	};
-};
-- 
2.34.1


  parent reply	other threads:[~2022-10-22  0:59 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-10-22  0:58 [PATCH V2 0/7] arm: dts: Create common imx8mn-u-boot Adam Ford
2022-10-22  0:58 ` [PATCH V2 1/7] arm: dts: imx8mn-u-boot: Create common imx8mn-u-boot.dtsi Adam Ford
2022-10-24 13:56   ` sbabic
2022-10-22  0:58 ` [PATCH V2 2/7] arm: dts: imx8mn-beacon-kit: Consolidate with imx8mn-u-boot Adam Ford
2022-10-24 13:55   ` sbabic
2022-10-22  0:58 ` [PATCH V2 3/7] arm: dts: imx8mn-bsh-smm-s2: " Adam Ford
2022-10-24 13:55   ` sbabic
2022-10-22  0:58 ` Adam Ford [this message]
2022-10-24 13:55   ` [PATCH V2 4/7] arm: dts: imx8mn-ddr4-evk: " sbabic
2022-10-22  0:58 ` [PATCH V2 5/7] arm: dts: imx8mn-evk: " Adam Ford
2022-10-24 13:54   ` sbabic
2022-10-22  0:58 ` [PATCH V2 6/7] arm: dts: imx8mn-var-som-symphony: " Adam Ford
2022-10-24 13:54   ` sbabic
2022-10-22  0:58 ` [PATCH V2 7/7] arm: dts: imx8mn-venice: " Adam Ford
2022-10-24 13:56   ` sbabic

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221022005837.170357-5-aford173@gmail.com \
    --to=aford173@gmail.com \
    --cc=ariel.dalessandro@collabora.com \
    --cc=festevam@gmail.com \
    --cc=michael@amarulasolutions.com \
    --cc=sbabic@denx.de \
    --cc=tharvey@gateworks.com \
    --cc=u-boot@lists.denx.de \
    --cc=uboot-imx@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox