From: Oliver Graute <oliver.graute@kococonnector.com>
To: sbabic@denx.de
Cc: festevam@gmail.com, peng.fan@nxp.com,
oliver.graute@kococonnector.com, uboot-imx@nxp.com,
agust@denx.de, u-boot@lists.denx.de,
"Denys Drozdov" <denys.drozdov@toradex.com>,
"Marcel Ziswiler" <marcel.ziswiler@toradex.com>,
"Horia Geantă" <horia.geanta@nxp.com>, "Ye Li" <ye.li@nxp.com>,
"Gaurav Jain" <gaurav.jain@nxp.com>
Subject: [PATCH v5] imx: imx8qm: cgtqmx8: switch to binman
Date: Wed, 26 Oct 2022 16:00:56 +0200 [thread overview]
Message-ID: <20221026140057.13207-2-oliver.graute@kococonnector.com> (raw)
In-Reply-To: <20221026140057.13207-1-oliver.graute@kococonnector.com>
Switch to use binman to pack images
Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
---
Changes for v5
- added CONFIG_FIT_EXTERNAL_OFFSET
Changes for v4
- rebased on master
Changes for v3
-added Reviewed-by
- rebased on master
arch/arm/dts/imx8qm-cgtqmx8.dts | 1 +
arch/arm/mach-imx/imx8/Kconfig | 1 +
board/congatec/cgtqmx8/imximage.cfg | 4 ++--
configs/cgtqmx8_defconfig | 3 ++-
doc/board/congatec/cgtqmx8.rst | 3 +--
5 files changed, 7 insertions(+), 5 deletions(-)
diff --git a/arch/arm/dts/imx8qm-cgtqmx8.dts b/arch/arm/dts/imx8qm-cgtqmx8.dts
index 555c357f6f..919d00644f 100644
--- a/arch/arm/dts/imx8qm-cgtqmx8.dts
+++ b/arch/arm/dts/imx8qm-cgtqmx8.dts
@@ -12,6 +12,7 @@
/memreserve/ 0x80000000 0x00020000;
#include "fsl-imx8qm.dtsi"
+#include "imx8qm-u-boot.dtsi"
/ {
model = "Congatec QMX8 Qseven series";
diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig
index ba2a38c7f7..a0036a32b5 100644
--- a/arch/arm/mach-imx/imx8/Kconfig
+++ b/arch/arm/mach-imx/imx8/Kconfig
@@ -76,6 +76,7 @@ config TARGET_IMX8QM_MEK
config TARGET_CONGA_QMX8
bool "Support congatec conga-QMX8 board"
+ select BINMAN
select BOARD_LATE_INIT
select SUPPORT_SPL
select IMX8QM
diff --git a/board/congatec/cgtqmx8/imximage.cfg b/board/congatec/cgtqmx8/imximage.cfg
index 5ecde0c530..43035088e3 100644
--- a/board/congatec/cgtqmx8/imximage.cfg
+++ b/board/congatec/cgtqmx8/imximage.cfg
@@ -4,8 +4,8 @@
*/
-/* Boot from SD, sector size 0x400 */
-BOOT_FROM SD 0x400
+BOOT_FROM sd
+
/* SoC type IMX8QM */
SOC_TYPE IMX8QM
/* Append seco container image */
diff --git a/configs/cgtqmx8_defconfig b/configs/cgtqmx8_defconfig
index ddc65a06b9..fb43de624b 100644
--- a/configs/cgtqmx8_defconfig
+++ b/configs/cgtqmx8_defconfig
@@ -20,8 +20,9 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
CONFIG_REMAKE_ELF=y
CONFIG_FIT=y
+CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTCOMMAND=y
diff --git a/doc/board/congatec/cgtqmx8.rst b/doc/board/congatec/cgtqmx8.rst
index bccdef2f16..16711a844d 100644
--- a/doc/board/congatec/cgtqmx8.rst
+++ b/doc/board/congatec/cgtqmx8.rst
@@ -57,8 +57,7 @@ Build U-Boot
$ export ATF_LOAD_ADDR=0x80000000
$ export BL33_LOAD_ADDR=0x80020000
$ make cgtqmx8_defconfig
- $ make u-boot.bin
- $ make flash.bin
+ $ make
Flash the binary into the SD card
---------------------------------
--
2.17.1
next prev parent reply other threads:[~2022-10-26 14:02 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-26 14:00 [PATCH v5] imx: imx8qm-rom7720: switch to binman Oliver Graute
2022-10-26 14:00 ` Oliver Graute [this message]
-- strict thread matches above, loose matches on Subject: below --
2022-10-25 15:20 [PATCH v4] " Oliver Graute
2022-10-25 15:20 ` [PATCH v5] imx: imx8qm: cgtqmx8: " Oliver Graute
2022-10-25 15:31 ` Oliver Graute
2022-10-25 15:53 ` Fabio Estevam
2022-10-26 14:00 ` Oliver Graute
2022-11-01 23:00 ` Fabio Estevam
2022-11-02 9:05 ` Oliver Graute
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221026140057.13207-2-oliver.graute@kococonnector.com \
--to=oliver.graute@kococonnector.com \
--cc=agust@denx.de \
--cc=denys.drozdov@toradex.com \
--cc=festevam@gmail.com \
--cc=gaurav.jain@nxp.com \
--cc=horia.geanta@nxp.com \
--cc=marcel.ziswiler@toradex.com \
--cc=peng.fan@nxp.com \
--cc=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
--cc=uboot-imx@nxp.com \
--cc=ye.li@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox