From: Oliver Graute <oliver.graute@kococonnector.com>
To: sbabic@denx.de
Cc: oliver.graute@kococonnector.com, oliver.graute@gmail.com,
festevam@gmail.com, peng.fan@nxp.com, uboot-imx@nxp.com,
"Anatolij Gustschin" <agust@denx.de>,
"Gaurav Jain" <gaurav.jain@nxp.com>,
"Horia Geantă" <horia.geanta@nxp.com>,
"Denys Drozdov" <denys.drozdov@toradex.com>,
"Ye Li" <ye.li@nxp.com>,
"Marcel Ziswiler" <marcel.ziswiler@toradex.com>,
u-boot@lists.denx.de
Subject: [PATCH v1] imx: imx8qxp: giedi switch to binman
Date: Wed, 2 Nov 2022 16:56:52 +0100 [thread overview]
Message-ID: <20221102155655.5296-6-oliver.graute@kococonnector.com> (raw)
In-Reply-To: <20221102155655.5296-1-oliver.graute@kococonnector.com>
Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
---
arch/arm/dts/imx8qxp-capricorn-u-boot.dtsi | 127 +++++++++++++++++++++
arch/arm/mach-imx/imx8/Kconfig | 1 +
board/siemens/capricorn/imximage.cfg | 2 +-
configs/giedi_defconfig | 2 +
4 files changed, 131 insertions(+), 1 deletion(-)
diff --git a/arch/arm/dts/imx8qxp-capricorn-u-boot.dtsi b/arch/arm/dts/imx8qxp-capricorn-u-boot.dtsi
index 1cf58fc3f9..020f58fd0f 100644
--- a/arch/arm/dts/imx8qxp-capricorn-u-boot.dtsi
+++ b/arch/arm/dts/imx8qxp-capricorn-u-boot.dtsi
@@ -3,6 +3,133 @@
* Copyright 2019 Siemens AG
*/
+/ {
+ binman: binman {
+ multiple-images;
+ };
+};
+
+&binman {
+ u-boot-spl-ddr {
+ align = <4>;
+ align-size = <4>;
+ filename = "u-boot-spl-ddr.bin";
+ pad-byte = <0xff>;
+
+ u-boot-spl {
+ align-end = <4>;
+ filename = "u-boot-spl.bin";
+ };
+ };
+
+ spl {
+ filename = "spl.bin";
+
+ mkimage {
+ args = "-n spl/u-boot-spl.cfgout -T imx8image -e 0x100000";
+
+ blob {
+ filename = "u-boot-spl-ddr.bin";
+ };
+ };
+ };
+
+ itb {
+ filename = "u-boot.itb";
+
+ fit {
+ description = "Configuration to load ATF before U-Boot";
+ fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
+ fit,fdt-list = "of-list";
+ #address-cells = <1>;
+
+ images {
+ uboot {
+ arch = "arm64";
+ compression = "none";
+ description = "U-Boot (64-bit)";
+ load = <CONFIG_SYS_TEXT_BASE>;
+ type = "standalone";
+
+ uboot-blob {
+ filename = "u-boot-nodtb.bin";
+ type = "blob-ext";
+ };
+ };
+
+ atf {
+ arch = "arm64";
+ compression = "none";
+ description = "ARM Trusted Firmware";
+ entry = <0x00910000>;
+ load = <0x00091000>;
+ type = "firmware";
+
+ atf-blob {
+ filename = "bl31.bin";
+ type = "atf-bl31";
+ };
+ };
+
+ scfw {
+ arch = "arm64";
+ compression = "none";
+ description = "System Controler Firmware";
+ type = "firmware";
+
+ scfw_blob {
+ filename = "mx8qx-mek-scfw-tcm.bin";
+ type = "blob-ext";
+ };
+ };
+
+ seco {
+ arch = "arm64";
+ compression = "none";
+ description = "Seco Firmware";
+ type = "firmware";
+
+ seco_blob {
+ filename = "mx8qxc0-ahab-container.img";
+ type = "blob-ext";
+ };
+ };
+
+ fdt {
+ type = "flat_dt";
+ compression = "none";
+
+ uboot-fdt-blob {
+ filename = "u-boot.dtb";
+ type = "blob-ext";
+ };
+ };
+ };
+
+ configurations {
+ default = "conf";
+
+ conf {
+ fdt = "fdt";
+ firmware = "uboot";
+ loadables = "atf";
+ };
+ };
+ };
+ };
+
+ imx-boot {
+ filename = "flash.bin";
+ pad-byte = <0x00>;
+
+ spl {
+ filename = "spl.bin";
+ offset = <0x0>;
+ type = "blob-ext";
+ };
+ };
+};
+
&{/imx8qx-pm} {
u-boot,dm-spl;
diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig
index 4ccbabf506..63d99ea23e 100644
--- a/arch/arm/mach-imx/imx8/Kconfig
+++ b/arch/arm/mach-imx/imx8/Kconfig
@@ -62,6 +62,7 @@ config TARGET_DENEB
config TARGET_GIEDI
bool "Support i.MX8QXP Capricorn Giedi board"
+ select BINMAN
select BOARD_LATE_INIT
select FACTORYSET
select IMX8QXP
diff --git a/board/siemens/capricorn/imximage.cfg b/board/siemens/capricorn/imximage.cfg
index fa871bac21..4350e2967c 100644
--- a/board/siemens/capricorn/imximage.cfg
+++ b/board/siemens/capricorn/imximage.cfg
@@ -8,7 +8,7 @@
/* Boot from SD, sector size 0x400 */
-BOOT_FROM SD 0x400
+BOOT_FROM sd
/* SoC type IMX8QX */
SOC_TYPE IMX8QX
/* Append seco container image */
diff --git a/configs/giedi_defconfig b/configs/giedi_defconfig
index ab7fa51172..fdc6b0b2b3 100644
--- a/configs/giedi_defconfig
+++ b/configs/giedi_defconfig
@@ -26,6 +26,8 @@ CONFIG_SYS_LOAD_ADDR=0x80280000
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
CONFIG_REMAKE_ELF=y
+CONFIG_FIT=y
+CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_BOOTDELAY=3
--
2.17.1
next prev parent reply other threads:[~2022-11-02 15:58 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-02 15:56 [PATCH 0/8] imx8: switch missing boards to binman Oliver Graute
2022-11-02 15:56 ` [PATCH v5] imx: imx8qm-rom7720: switch " Oliver Graute
2022-11-02 15:56 ` [PATCH v6] imx: imx8qm: cgtqmx8: " Oliver Graute
2022-11-02 15:56 ` [PATCH v1] imx: imx8qxp: imx8qxp_mek " Oliver Graute
2022-11-02 15:56 ` [PATCH v2] imx: imx8qm: imx8qm_mek " Oliver Graute
2022-11-02 15:56 ` Oliver Graute [this message]
2022-11-02 15:56 ` [PATCH v1] imx: imx8qxp: deneb " Oliver Graute
2022-11-02 15:56 ` [PATCH v1] imx: imx8x: colibri: " Oliver Graute
2022-11-02 15:56 ` [PATCH v1] imx: imx8: apalis: " Oliver Graute
2022-11-02 16:16 ` Fabio Estevam
2022-11-04 12:38 ` Oliver Graute
2022-11-04 12:58 ` Fabio Estevam
2022-11-04 13:07 ` Oliver Graute
2022-11-04 13:03 ` Oliver Graute
2022-11-02 16:07 ` [PATCH 0/8] imx8: switch missing boards " Fabio Estevam
-- strict thread matches above, loose matches on Subject: below --
2022-10-26 8:44 [PATCH v1] imx: imx8qxp: giedi switch " Oliver Graute
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221102155655.5296-6-oliver.graute@kococonnector.com \
--to=oliver.graute@kococonnector.com \
--cc=agust@denx.de \
--cc=denys.drozdov@toradex.com \
--cc=festevam@gmail.com \
--cc=gaurav.jain@nxp.com \
--cc=horia.geanta@nxp.com \
--cc=marcel.ziswiler@toradex.com \
--cc=oliver.graute@gmail.com \
--cc=peng.fan@nxp.com \
--cc=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
--cc=uboot-imx@nxp.com \
--cc=ye.li@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox