[PATCH v3 0/1] Makefile: rework u-boot-initial-env target

[Max Krummenacher <max.oss.09@gmail.com>]

From: Max Krummenacher <max.krummenacher@toradex.com>


With CONFIG_LTO enabled the current way of extracting the
configured environment no longer works, i.e. the object file
content changes due to LTO.

Build a host tool which prints the configured environment instead
of using objcopy and friends to achive the same.

The code and Makefile changes were mostly stolen from tools/env/
i.e. the target userspace tools to access the environment.


Changes in v3:
- moved the tool from scripts/ to tools/. Suggested by Tom Rini
- changed the dependencies to '$(env_h)' and 'tools'.
  Suggested by Tom Rini and Pali Rohár.
- removed the sed rule which replaces \x00 with \x0A as this is already
  done by the tool. Suggested by Pali Rohár.

Changes in v2:
- reworked to build a host tool which prints the configured
  environment as proposed by Pali Rohár
  https://lore.kernel.org/u-boot/20221018174827.1393211-1-max.oss.09@gmail.com/
- renamed patch, v1 used "Makefile: fix u-boot-initial-env target if lto is enabled"

Max Krummenacher (1):
  Makefile: rework u-boot-initial-env target

 Makefile                |  9 +++++----
 tools/.gitignore        |  1 +
 tools/Makefile          |  3 +++
 tools/printinitialenv.c | 44 +++++++++++++++++++++++++++++++++++++++++
 4 files changed, 53 insertions(+), 4 deletions(-)
 create mode 100644 tools/printinitialenv.c

-- 
2.35.3