* [PATCH v5 0/8] arm: dts: imx: sync device trees with upstream linux kernel part 1
@ 2022-11-07 21:22 Marcel Ziswiler
2022-11-07 21:22 ` [PATCH v5 1/8] vf610: synchronise device tree with linux Marcel Ziswiler
` (8 more replies)
0 siblings, 9 replies; 19+ messages in thread
From: Marcel Ziswiler @ 2022-11-07 21:22 UTC (permalink / raw)
To: u-boot
Cc: Giulio Benetti, Fabio Estevam, Jesse Taube, Marcel Ziswiler,
Angus Ainslie, Ariel D'Alessandro, Marek Vasut,
NXP i.MX U-Boot Team, Stefano Babic, Teresa Remmet, Tim Harvey,
kernel
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
This series synchronises them imx device trees with the upstream Linux
kernel (v6.1-rc3). I split it into two parts. This is part 1.
It also fixes a few issues as discussed during/after the pre-mature
application of my first series [1].
I am not touching kontron-sl-mx6ul as Frieder already took care of those
[2].
Feedback welcome. Thanks!
[1] https://patchwork.ozlabs.org/project/uboot/cover/20220721132748.1052244-1-marcel@ziswiler.com/
[2] https://patchwork.ozlabs.org/project/uboot/cover/20220823142917.306176-1-frieder@fris.de/
Changes in v5:
- Add Giulio's reviewed-by and tested-by. Thanks!
- Add clock-names "per" to lpuart and re-add lcdif and usb* nodes as
pointed out by Giulio.
- Add Tim's tested-by. Thanks!
Changes in v4:
- Re-synched with v6.1-rc3 which now already contains the recent DDR
pinmux addition.
- Re-named commit subject and re-worded commit message to indicate
migration to automatic build system included -u-boot.dtsi device
tree include files. Thanks to Giulio for pointing this out.
- Use imxrt1050-evk-u-boot.dtsi as provided/tested by Jesse.
- Explain intent in commit message as pointed out by Giulio.
- Re-synched with v6.1-rc3.
- Re-based after Adam's common imx8mn-u-boot device tree creation.
Changes in v3:
- Incorporate feedback from Jesse.
Changes in v2:
- imxrt1050: Re-added DDR timings aka semc node as pointed out by Fabio. Thanks!
- imx8ulp: Re-added s400_mu device tree node.
Marcel Ziswiler (8):
vf610: synchronise device tree with linux
imxrt1020: migrate to build system included -u-boot.dtsi
imxrt1050: synchronise device tree with linux
imx8ulp: synchronise device tree with linux
imx8mq: synchronise device tree with linux
imx8mp: synchronise device tree with linux
imx8mn: synchronise device tree with linux
imx8mm: synchronise device tree with linux
arch/arm/dts/imx8mm-beacon-baseboard.dtsi | 4 +-
arch/arm/dts/imx8mm-evk.dtsi | 43 ++
arch/arm/dts/imx8mm-icore-mx8mm.dtsi | 14 +-
arch/arm/dts/imx8mm-mx8menlo.dts | 14 +-
arch/arm/dts/imx8mm-u-boot.dtsi | 2 +-
arch/arm/dts/imx8mm-venice-gw700x.dtsi | 24 +-
arch/arm/dts/imx8mm-venice-gw7901.dts | 12 +-
arch/arm/dts/imx8mm-venice-gw7902.dts | 14 +-
arch/arm/dts/imx8mm-venice-gw7903.dts | 6 +-
arch/arm/dts/imx8mm-venice-gw7904.dts | 4 +
arch/arm/dts/imx8mm-verdin.dtsi | 50 +-
arch/arm/dts/imx8mn-beacon-baseboard.dtsi | 4 +-
arch/arm/dts/imx8mn-evk.dtsi | 45 +-
arch/arm/dts/imx8mn-var-som-symphony.dts | 6 +-
arch/arm/dts/imx8mn-venice-gw7902.dts | 9 +-
arch/arm/dts/imx8mn.dtsi | 14 +-
arch/arm/dts/imx8mp-dhcom-pdk2.dts | 29 +-
arch/arm/dts/imx8mp-dhcom-som.dtsi | 20 +-
arch/arm/dts/imx8mp-evk.dts | 179 ++++--
arch/arm/dts/imx8mp-icore-mx8mp-edimm2.2.dts | 2 +-
arch/arm/dts/imx8mp-icore-mx8mp.dtsi | 2 +-
arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts | 48 +-
arch/arm/dts/imx8mp-u-boot.dtsi | 2 +-
arch/arm/dts/imx8mp-venice-gw74xx.dts | 284 ++++++---
arch/arm/dts/imx8mp-verdin.dtsi | 32 +-
arch/arm/dts/imx8mp.dtsi | 147 ++++-
arch/arm/dts/imx8mq-evk.dts | 43 ++
arch/arm/dts/imx8mq-librem5-r3.dtsi | 45 ++
arch/arm/dts/imx8mq-librem5-r4.dts | 20 +-
arch/arm/dts/imx8mq-librem5.dtsi | 153 ++++-
arch/arm/dts/imx8mq-u-boot.dtsi | 10 +-
arch/arm/dts/imx8mq.dtsi | 19 +-
arch/arm/dts/imx8ulp-evk-u-boot.dtsi | 15 +-
arch/arm/dts/imx8ulp-evk.dts | 240 ++-----
arch/arm/dts/imx8ulp-pinfunc.h | 4 +-
arch/arm/dts/imx8ulp.dtsi | 594 +++++-------------
arch/arm/dts/imxrt1020-evk-u-boot.dtsi | 7 +-
arch/arm/dts/imxrt1020-evk.dts | 1 -
arch/arm/dts/imxrt1050-evk-u-boot.dtsi | 274 +++++++-
arch/arm/dts/imxrt1050-evk.dts | 257 +-------
arch/arm/dts/imxrt1050-pinfunc.h | 2 +-
arch/arm/dts/imxrt1050.dtsi | 168 +++--
arch/arm/dts/vf610-pinfunc.h | 2 +-
include/dt-bindings/clock/imx8mp-clock.h | 13 +-
include/dt-bindings/clock/imx8ulp-clock.h | 53 +-
include/dt-bindings/clock/imxrt1050-clock.h | 9 +-
include/dt-bindings/interconnect/fsl,imx8mp.h | 59 ++
include/dt-bindings/interconnect/imx8mm.h | 50 ++
include/dt-bindings/interconnect/imx8mn.h | 41 ++
include/dt-bindings/power/imx8mp-power.h | 21 +-
include/dt-bindings/power/imx8ulp-power.h | 26 +
include/dt-bindings/reset/imx8mp-reset.h | 50 ++
include/dt-bindings/reset/imx8mq-reset.h | 61 +-
include/dt-bindings/reset/imx8ulp-pcc-reset.h | 59 ++
54 files changed, 1984 insertions(+), 1322 deletions(-)
create mode 100644 arch/arm/dts/imx8mq-librem5-r3.dtsi
create mode 100644 include/dt-bindings/interconnect/fsl,imx8mp.h
create mode 100644 include/dt-bindings/interconnect/imx8mm.h
create mode 100644 include/dt-bindings/interconnect/imx8mn.h
create mode 100644 include/dt-bindings/power/imx8ulp-power.h
create mode 100644 include/dt-bindings/reset/imx8mp-reset.h
create mode 100644 include/dt-bindings/reset/imx8ulp-pcc-reset.h
--
2.35.1
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH v5 1/8] vf610: synchronise device tree with linux
2022-11-07 21:22 [PATCH v5 0/8] arm: dts: imx: sync device trees with upstream linux kernel part 1 Marcel Ziswiler
@ 2022-11-07 21:22 ` Marcel Ziswiler
2022-11-08 16:39 ` sbabic
2022-11-07 21:22 ` [PATCH v5 2/8] imxrt1020: migrate to build system included -u-boot.dtsi Marcel Ziswiler
` (7 subsequent siblings)
8 siblings, 1 reply; 19+ messages in thread
From: Marcel Ziswiler @ 2022-11-07 21:22 UTC (permalink / raw)
To: u-boot
Cc: Giulio Benetti, Fabio Estevam, Jesse Taube, Marcel Ziswiler,
Stefano Babic
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Synchronise device tree with linux v6.1-rc3.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
(no changes since v4)
Changes in v4:
- Re-synched with v6.1-rc3 which now already contains the recent DDR
pinmux addition.
arch/arm/dts/vf610-pinfunc.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/dts/vf610-pinfunc.h b/arch/arm/dts/vf610-pinfunc.h
index 740276431a..b7b7322a2d 100644
--- a/arch/arm/dts/vf610-pinfunc.h
+++ b/arch/arm/dts/vf610-pinfunc.h
@@ -802,7 +802,6 @@
#define VF610_PAD_PTE28__EWM_OUT 0x214 0x000 ALT7 0x0
#define VF610_PAD_PTA7__GPIO_134 0x218 0x000 ALT0 0x0
#define VF610_PAD_PTA7__VIU_PIX_CLK 0x218 0x3AC ALT1 0x1
-
#define VF610_PAD_DDR_RESETB 0x21c 0x000 ALT0 0x0
#define VF610_PAD_DDR_A15__DDR_A_15 0x220 0x000 ALT0 0x0
#define VF610_PAD_DDR_A14__DDR_A_14 0x224 0x000 ALT0 0x0
@@ -853,4 +852,5 @@
#define VF610_PAD_DDR_ODT0__DDR_ODT_1 0x2d8 0x000 ALT0 0x0
#define VF610_PAD_DDR_DDRBYTE1__DDR_DDRBYTE1 0x2dc 0x000 ALT0 0x0
#define VF610_PAD_DDR_DDRBYTE2__DDR_DDRBYTE2 0x2e0 0x000 ALT0 0x0
+
#endif
--
2.35.1
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH v5 2/8] imxrt1020: migrate to build system included -u-boot.dtsi
2022-11-07 21:22 [PATCH v5 0/8] arm: dts: imx: sync device trees with upstream linux kernel part 1 Marcel Ziswiler
2022-11-07 21:22 ` [PATCH v5 1/8] vf610: synchronise device tree with linux Marcel Ziswiler
@ 2022-11-07 21:22 ` Marcel Ziswiler
2022-11-08 16:39 ` sbabic
2022-11-07 21:22 ` [PATCH v5 3/8] imxrt1050: synchronise device tree with linux Marcel Ziswiler
` (6 subsequent siblings)
8 siblings, 1 reply; 19+ messages in thread
From: Marcel Ziswiler @ 2022-11-07 21:22 UTC (permalink / raw)
To: u-boot
Cc: Giulio Benetti, Fabio Estevam, Jesse Taube, Marcel Ziswiler,
NXP i.MX U-Boot Team, Stefano Babic
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Migrate to using automatic build system included -u-boot.dtsi device
tree include files.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
---
Changes in v5:
- Add Giulio's reviewed-by and tested-by. Thanks!
Changes in v4:
- Re-named commit subject and re-worded commit message to indicate
migration to automatic build system included -u-boot.dtsi device
tree include files. Thanks to Giulio for pointing this out.
arch/arm/dts/imxrt1020-evk-u-boot.dtsi | 7 ++++---
arch/arm/dts/imxrt1020-evk.dts | 1 -
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/dts/imxrt1020-evk-u-boot.dtsi b/arch/arm/dts/imxrt1020-evk-u-boot.dtsi
index 9e1b074d2e..7cab486f5f 100644
--- a/arch/arm/dts/imxrt1020-evk-u-boot.dtsi
+++ b/arch/arm/dts/imxrt1020-evk-u-boot.dtsi
@@ -67,9 +67,6 @@
imxrt1020-evk {
u-boot,dm-spl;
- pinctrl_lpuart1: lpuart1grp {
- u-boot,dm-spl;
- };
pinctrl_semc: semcgrp {
u-boot,dm-spl;
@@ -81,6 +78,10 @@
};
};
+&pinctrl_lpuart1 {
+ u-boot,dm-spl;
+};
+
&usdhc1 {
u-boot,dm-spl;
};
diff --git a/arch/arm/dts/imxrt1020-evk.dts b/arch/arm/dts/imxrt1020-evk.dts
index 22ae5ed735..d4d1de4ea8 100644
--- a/arch/arm/dts/imxrt1020-evk.dts
+++ b/arch/arm/dts/imxrt1020-evk.dts
@@ -6,7 +6,6 @@
/dts-v1/;
#include "imxrt1020.dtsi"
-#include "imxrt1020-evk-u-boot.dtsi"
#include "imxrt1020-pinfunc.h"
/ {
--
2.35.1
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH v5 3/8] imxrt1050: synchronise device tree with linux
2022-11-07 21:22 [PATCH v5 0/8] arm: dts: imx: sync device trees with upstream linux kernel part 1 Marcel Ziswiler
2022-11-07 21:22 ` [PATCH v5 1/8] vf610: synchronise device tree with linux Marcel Ziswiler
2022-11-07 21:22 ` [PATCH v5 2/8] imxrt1020: migrate to build system included -u-boot.dtsi Marcel Ziswiler
@ 2022-11-07 21:22 ` Marcel Ziswiler
2022-11-07 21:55 ` Giulio Benetti
2022-11-08 16:39 ` sbabic
2022-11-07 21:22 ` [PATCH v5 4/8] imx8ulp: " Marcel Ziswiler
` (5 subsequent siblings)
8 siblings, 2 replies; 19+ messages in thread
From: Marcel Ziswiler @ 2022-11-07 21:22 UTC (permalink / raw)
To: u-boot
Cc: Giulio Benetti, Fabio Estevam, Jesse Taube, Marcel Ziswiler,
NXP i.MX U-Boot Team, Stefano Babic
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Synchronise device tree with linux v6.1-rc3.
Note: Nowadays, the intent is for them regular device trees to just be
synchronised from them Linux kernel device trees and any and all U-Boot
specific changes need to go into the -u-boot.dtsi device tree include
files which BTW get included automatically by the U-Boot build system.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
Changes in v5:
- Add clock-names "per" to lpuart and re-add lcdif and usb* nodes as
pointed out by Giulio.
Changes in v4:
- Use imxrt1050-evk-u-boot.dtsi as provided/tested by Jesse.
- Explain intent in commit message as pointed out by Giulio.
- Re-synched with v6.1-rc3.
Changes in v3:
- Incorporate feedback from Jesse.
Changes in v2:
- imxrt1050: Re-added DDR timings aka semc node as pointed out by Fabio. Thanks!
arch/arm/dts/imxrt1050-evk-u-boot.dtsi | 274 ++++++++++++++++++--
arch/arm/dts/imxrt1050-evk.dts | 257 +++---------------
arch/arm/dts/imxrt1050-pinfunc.h | 2 +-
arch/arm/dts/imxrt1050.dtsi | 168 +++++-------
include/dt-bindings/clock/imxrt1050-clock.h | 9 +-
5 files changed, 366 insertions(+), 344 deletions(-)
diff --git a/arch/arm/dts/imxrt1050-evk-u-boot.dtsi b/arch/arm/dts/imxrt1050-evk-u-boot.dtsi
index 617cece448..e217dfd9eb 100644
--- a/arch/arm/dts/imxrt1050-evk-u-boot.dtsi
+++ b/arch/arm/dts/imxrt1050-evk-u-boot.dtsi
@@ -4,9 +4,18 @@
* Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
*/
+#include <dt-bindings/memory/imxrt-sdram.h>
+#include "imxrt1050-pinfunc.h"
+
/ {
+ aliases {
+ display0 = &lcdif;
+ usbphy0 = &usbphy1;
+ };
+
chosen {
u-boot,dm-spl;
+ tick-timer = &gpt;
};
clocks {
@@ -15,6 +24,92 @@
soc {
u-boot,dm-spl;
+
+ usbphy1: usbphy@400d9000 {
+ compatible = "fsl,imxrt-usbphy";
+ reg = <0x400d9000 0x1000>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ usbmisc: usbmisc@402e0800 {
+ #index-cells = <1>;
+ compatible = "fsl,imxrt-usbmisc";
+ reg = <0x402e0800 0x200>;
+ clocks = <&clks IMXRT1050_CLK_USBOH3>;
+ };
+
+ usbotg1: usb@402e0000 {
+ compatible = "fsl,imxrt-usb", "fsl,imx27-usb";
+ reg = <0x402e0000 0x200>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMXRT1050_CLK_USBOH3>;
+ fsl,usbphy = <&usbphy1>;
+ fsl,usbmisc = <&usbmisc 0>;
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x10>;
+ rx-burst-size-dword = <0x10>;
+ status = "disabled";
+ };
+
+ lcdif: lcdif@402b8000 {
+ compatible = "fsl,imxrt-lcdif";
+ reg = <0x402b8000 0x4000>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMXRT1050_CLK_LCDIF_PIX>,
+ <&clks IMXRT1050_CLK_LCDIF_APB>;
+ clock-names = "pix", "axi";
+ assigned-clocks = <&clks IMXRT1050_CLK_LCDIF_SEL>;
+ assigned-clock-parents = <&clks IMXRT1050_CLK_PLL5_VIDEO>;
+ status = "disabled";
+ };
+
+ semc: semc@402f0000 {
+ compatible = "fsl,imxrt-semc";
+ reg = <0x402f0000 0x4000>;
+ clocks = <&clks IMXRT1050_CLK_SEMC>;
+ pinctrl-0 = <&pinctrl_semc>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+ };
+};
+
+&semc {
+ u-boot,dm-spl;
+ /*
+ * Memory configuration from sdram datasheet IS42S16160J-6BLI
+ */
+ fsl,sdram-mux = /bits/ 8 <MUX_A8_SDRAM_A8
+ MUX_CSX0_SDRAM_CS1
+ 0
+ 0
+ 0
+ 0>;
+ fsl,sdram-control = /bits/ 8 <MEM_WIDTH_16BITS
+ BL_8
+ COL_9BITS
+ CL_3>;
+ fsl,sdram-timing = /bits/ 8 <0x2
+ 0x2
+ 0x9
+ 0x1
+ 0x5
+ 0x6
+
+ 0x20
+ 0x09
+ 0x01
+ 0x00
+
+ 0x04
+ 0x0A
+ 0x21
+ 0x50>;
+
+ bank1: bank@0 {
+ fsl,base-address = <0x80000000>;
+ fsl,memory-size = <MEM_SIZE_32M>;
+ u-boot,dm-spl;
};
};
@@ -31,60 +126,205 @@
};
&gpio1 {
+ compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
u-boot,dm-spl;
};
&gpio2 {
+ compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
u-boot,dm-spl;
};
&gpio3 {
+ compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
u-boot,dm-spl;
};
&gpio4 {
+ compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
u-boot,dm-spl;
};
&gpio5 {
+ compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
u-boot,dm-spl;
};
-&gpt1 {
+&gpt {
+ clocks = <&osc>;
+ compatible = "fsl,imxrt-gpt";
+ status = "okay";
u-boot,dm-spl;
};
&lpuart1 { /* console */
+ compatible = "fsl,imxrt-lpuart";
+ clock-names = "per";
u-boot,dm-spl;
};
-&semc {
+&iomuxc {
u-boot,dm-spl;
+ compatible = "fsl,imxrt-iomuxc";
+ pinctrl-0 = <&pinctrl_lpuart1>;
- bank1: bank@0 {
+ pinctrl_semc: semcgrp {
+ fsl,pins = <
+ MXRT1050_IOMUXC_GPIO_EMC_00_SEMC_DA00
+ 0xf1 /* SEMC_D0 */
+ MXRT1050_IOMUXC_GPIO_EMC_01_SEMC_DA01
+ 0xf1 /* SEMC_D1 */
+ MXRT1050_IOMUXC_GPIO_EMC_02_SEMC_DA02
+ 0xf1 /* SEMC_D2 */
+ MXRT1050_IOMUXC_GPIO_EMC_03_SEMC_DA03
+ 0xf1 /* SEMC_D3 */
+ MXRT1050_IOMUXC_GPIO_EMC_04_SEMC_DA04
+ 0xf1 /* SEMC_D4 */
+ MXRT1050_IOMUXC_GPIO_EMC_05_SEMC_DA05
+ 0xf1 /* SEMC_D5 */
+ MXRT1050_IOMUXC_GPIO_EMC_06_SEMC_DA06
+ 0xf1 /* SEMC_D6 */
+ MXRT1050_IOMUXC_GPIO_EMC_07_SEMC_DA07
+ 0xf1 /* SEMC_D7 */
+ MXRT1050_IOMUXC_GPIO_EMC_08_SEMC_DM00
+ 0xf1 /* SEMC_DM0 */
+ MXRT1050_IOMUXC_GPIO_EMC_09_SEMC_ADDR00
+ 0xf1 /* SEMC_A0 */
+ MXRT1050_IOMUXC_GPIO_EMC_10_SEMC_ADDR01
+ 0xf1 /* SEMC_A1 */
+ MXRT1050_IOMUXC_GPIO_EMC_11_SEMC_ADDR02
+ 0xf1 /* SEMC_A2 */
+ MXRT1050_IOMUXC_GPIO_EMC_12_SEMC_ADDR03
+ 0xf1 /* SEMC_A3 */
+ MXRT1050_IOMUXC_GPIO_EMC_13_SEMC_ADDR04
+ 0xf1 /* SEMC_A4 */
+ MXRT1050_IOMUXC_GPIO_EMC_14_SEMC_ADDR05
+ 0xf1 /* SEMC_A5 */
+ MXRT1050_IOMUXC_GPIO_EMC_15_SEMC_ADDR06
+ 0xf1 /* SEMC_A6 */
+ MXRT1050_IOMUXC_GPIO_EMC_16_SEMC_ADDR07
+ 0xf1 /* SEMC_A7 */
+ MXRT1050_IOMUXC_GPIO_EMC_17_SEMC_ADDR08
+ 0xf1 /* SEMC_A8 */
+ MXRT1050_IOMUXC_GPIO_EMC_18_SEMC_ADDR09
+ 0xf1 /* SEMC_A9 */
+ MXRT1050_IOMUXC_GPIO_EMC_19_SEMC_ADDR11
+ 0xf1 /* SEMC_A11 */
+ MXRT1050_IOMUXC_GPIO_EMC_20_SEMC_ADDR12
+ 0xf1 /* SEMC_A12 */
+ MXRT1050_IOMUXC_GPIO_EMC_21_SEMC_BA0
+ 0xf1 /* SEMC_BA0 */
+ MXRT1050_IOMUXC_GPIO_EMC_22_SEMC_BA1
+ 0xf1 /* SEMC_BA1 */
+ MXRT1050_IOMUXC_GPIO_EMC_23_SEMC_ADDR10
+ 0xf1 /* SEMC_A10 */
+ MXRT1050_IOMUXC_GPIO_EMC_24_SEMC_CAS
+ 0xf1 /* SEMC_CAS */
+ MXRT1050_IOMUXC_GPIO_EMC_25_SEMC_RAS
+ 0xf1 /* SEMC_RAS */
+ MXRT1050_IOMUXC_GPIO_EMC_26_SEMC_CLK
+ 0xf1 /* SEMC_CLK */
+ MXRT1050_IOMUXC_GPIO_EMC_27_SEMC_CKE
+ 0xf1 /* SEMC_CKE */
+ MXRT1050_IOMUXC_GPIO_EMC_28_SEMC_WE
+ 0xf1 /* SEMC_WE */
+ MXRT1050_IOMUXC_GPIO_EMC_29_SEMC_CS0
+ 0xf1 /* SEMC_CS0 */
+ MXRT1050_IOMUXC_GPIO_EMC_30_SEMC_DA08
+ 0xf1 /* SEMC_D8 */
+ MXRT1050_IOMUXC_GPIO_EMC_31_SEMC_DA09
+ 0xf1 /* SEMC_D9 */
+ MXRT1050_IOMUXC_GPIO_EMC_32_SEMC_DA10
+ 0xf1 /* SEMC_D10 */
+ MXRT1050_IOMUXC_GPIO_EMC_33_SEMC_DA11
+ 0xf1 /* SEMC_D11 */
+ MXRT1050_IOMUXC_GPIO_EMC_34_SEMC_DA12
+ 0xf1 /* SEMC_D12 */
+ MXRT1050_IOMUXC_GPIO_EMC_35_SEMC_DA13
+ 0xf1 /* SEMC_D13 */
+ MXRT1050_IOMUXC_GPIO_EMC_36_SEMC_DA14
+ 0xf1 /* SEMC_D14 */
+ MXRT1050_IOMUXC_GPIO_EMC_37_SEMC_DA15
+ 0xf1 /* SEMC_D15 */
+ MXRT1050_IOMUXC_GPIO_EMC_38_SEMC_DM01
+ 0xf1 /* SEMC_DM1 */
+ MXRT1050_IOMUXC_GPIO_EMC_39_SEMC_DQS
+ (IMX_PAD_SION | 0xf1) /* SEMC_DQS */
+ >;
u-boot,dm-spl;
};
-};
-&iomuxc {
- u-boot,dm-spl;
+ pinctrl_lcdif: lcdifgrp {
+ fsl,pins = <
+ MXRT1050_IOMUXC_GPIO_B0_00_LCD_CLK 0x1b0b1
+ MXRT1050_IOMUXC_GPIO_B0_01_LCD_ENABLE 0x1b0b1
+ MXRT1050_IOMUXC_GPIO_B0_02_LCD_HSYNC 0x1b0b1
+ MXRT1050_IOMUXC_GPIO_B0_03_LCD_VSYNC 0x1b0b1
+ MXRT1050_IOMUXC_GPIO_B0_04_LCD_DATA00 0x1b0b1
+ MXRT1050_IOMUXC_GPIO_B0_05_LCD_DATA01 0x1b0b1
+ MXRT1050_IOMUXC_GPIO_B0_06_LCD_DATA02 0x1b0b1
+ MXRT1050_IOMUXC_GPIO_B0_07_LCD_DATA03 0x1b0b1
+ MXRT1050_IOMUXC_GPIO_B0_08_LCD_DATA04 0x1b0b1
+ MXRT1050_IOMUXC_GPIO_B0_09_LCD_DATA05 0x1b0b1
+ MXRT1050_IOMUXC_GPIO_B0_10_LCD_DATA06 0x1b0b1
+ MXRT1050_IOMUXC_GPIO_B0_11_LCD_DATA07 0x1b0b1
+ MXRT1050_IOMUXC_GPIO_B0_12_LCD_DATA08 0x1b0b1
+ MXRT1050_IOMUXC_GPIO_B0_13_LCD_DATA09 0x1b0b1
+ MXRT1050_IOMUXC_GPIO_B0_14_LCD_DATA10 0x1b0b1
+ MXRT1050_IOMUXC_GPIO_B0_15_LCD_DATA11 0x1b0b1
+ MXRT1050_IOMUXC_GPIO_B1_01_LCD_DATA13 0x1b0b1
+ MXRT1050_IOMUXC_GPIO_B1_02_LCD_DATA14 0x1b0b1
+ MXRT1050_IOMUXC_GPIO_B1_03_LCD_DATA15 0x1b0b1
+ MXRT1050_IOMUXC_GPIO_B1_15_GPIO2_IO31 0x0b069
+ MXRT1050_IOMUXC_GPIO_AD_B0_02_GPIO1_IO02 0x0b069
+ >;
+ };
- imxrt1050-evk {
+ pinctrl_lpuart1: lpuart1grp {
u-boot,dm-spl;
- pinctrl_lpuart1: lpuart1grp {
- u-boot,dm-spl;
- };
+ };
- pinctrl_semc: semcgrp {
- u-boot,dm-spl;
- };
+ pinctrl_usdhc0: usdhc0grp {
+ u-boot,dm-spl;
+ };
+ };
+
+&usdhc1 {
+ compatible = "fsl,imxrt-usdhc";
+ u-boot,dm-spl;
+};
+
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif>;
+ display = <&display0>;
+ status = "okay";
+
+ display0: display0 {
+ bits-per-pixel = <16>;
+ bus-width = <16>;
- pinctrl_usdhc0: usdhc0grp {
- u-boot,dm-spl;
+ display-timings {
+ timing0: timing0 {
+ clock-frequency = <9300000>;
+ hactive = <480>;
+ vactive = <272>;
+ hback-porch = <4>;
+ hfront-porch = <8>;
+ vback-porch = <4>;
+ vfront-porch = <8>;
+ hsync-len = <41>;
+ vsync-len = <10>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ };
};
};
};
-&usdhc1 {
- u-boot,dm-spl;
+&usbotg1 {
+ dr_mode = "host";
+ status = "okay";
};
diff --git a/arch/arm/dts/imxrt1050-evk.dts b/arch/arm/dts/imxrt1050-evk.dts
index fb2da3adfc..6a9c10decf 100644
--- a/arch/arm/dts/imxrt1050-evk.dts
+++ b/arch/arm/dts/imxrt1050-evk.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2019
* Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
@@ -6,7 +6,6 @@
/dts-v1/;
#include "imxrt1050.dtsi"
-#include "imxrt1050-evk-u-boot.dtsi"
#include "imxrt1050-pinfunc.h"
/ {
@@ -14,210 +13,52 @@
compatible = "fsl,imxrt1050-evk", "fsl,imxrt1050";
chosen {
- bootargs = "root=/dev/ram";
- stdout-path = "serial0:115200n8";
- tick-timer = &gpt1;
+ stdout-path = &lpuart1;
};
- memory {
+ aliases {
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ gpio4 = &gpio5;
+ mmc0 = &usdhc1;
+ serial0 = &lpuart1;
+ };
+
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x2000000>;
};
};
-&lpuart1 { /* console */
+&lpuart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart1>;
status = "okay";
};
-&semc {
- /*
- * Memory configuration from sdram datasheet IS42S16160J-6BLI
- */
- fsl,sdram-mux = /bits/ 8 <MUX_A8_SDRAM_A8
- MUX_CSX0_SDRAM_CS1
- 0
- 0
- 0
- 0>;
- fsl,sdram-control = /bits/ 8 <MEM_WIDTH_16BITS
- BL_8
- COL_9BITS
- CL_3>;
- fsl,sdram-timing = /bits/ 8 <0x2
- 0x2
- 0x9
- 0x1
- 0x5
- 0x6
-
- 0x20
- 0x09
- 0x01
- 0x00
-
- 0x04
- 0x0A
- 0x21
- 0x50>;
-
- bank1: bank@0 {
- fsl,base-address = <0x80000000>;
- fsl,memory-size = <MEM_SIZE_32M>;
- };
-};
-
&iomuxc {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lpuart1>;
-
- imxrt1050-evk {
- pinctrl_lpuart1: lpuart1grp {
- fsl,pins = <
- MXRT1050_IOMUXC_GPIO_AD_B0_12_LPUART1_TXD
- 0xf1
- MXRT1050_IOMUXC_GPIO_AD_B0_13_LPUART1_RXD
- 0xf1
- >;
- };
-
- pinctrl_semc: semcgrp {
- fsl,pins = <
- MXRT1050_IOMUXC_GPIO_EMC_00_SEMC_DA00
- 0xf1 /* SEMC_D0 */
- MXRT1050_IOMUXC_GPIO_EMC_01_SEMC_DA01
- 0xf1 /* SEMC_D1 */
- MXRT1050_IOMUXC_GPIO_EMC_02_SEMC_DA02
- 0xf1 /* SEMC_D2 */
- MXRT1050_IOMUXC_GPIO_EMC_03_SEMC_DA03
- 0xf1 /* SEMC_D3 */
- MXRT1050_IOMUXC_GPIO_EMC_04_SEMC_DA04
- 0xf1 /* SEMC_D4 */
- MXRT1050_IOMUXC_GPIO_EMC_05_SEMC_DA05
- 0xf1 /* SEMC_D5 */
- MXRT1050_IOMUXC_GPIO_EMC_06_SEMC_DA06
- 0xf1 /* SEMC_D6 */
- MXRT1050_IOMUXC_GPIO_EMC_07_SEMC_DA07
- 0xf1 /* SEMC_D7 */
- MXRT1050_IOMUXC_GPIO_EMC_08_SEMC_DM00
- 0xf1 /* SEMC_DM0 */
- MXRT1050_IOMUXC_GPIO_EMC_09_SEMC_ADDR00
- 0xf1 /* SEMC_A0 */
- MXRT1050_IOMUXC_GPIO_EMC_10_SEMC_ADDR01
- 0xf1 /* SEMC_A1 */
- MXRT1050_IOMUXC_GPIO_EMC_11_SEMC_ADDR02
- 0xf1 /* SEMC_A2 */
- MXRT1050_IOMUXC_GPIO_EMC_12_SEMC_ADDR03
- 0xf1 /* SEMC_A3 */
- MXRT1050_IOMUXC_GPIO_EMC_13_SEMC_ADDR04
- 0xf1 /* SEMC_A4 */
- MXRT1050_IOMUXC_GPIO_EMC_14_SEMC_ADDR05
- 0xf1 /* SEMC_A5 */
- MXRT1050_IOMUXC_GPIO_EMC_15_SEMC_ADDR06
- 0xf1 /* SEMC_A6 */
- MXRT1050_IOMUXC_GPIO_EMC_16_SEMC_ADDR07
- 0xf1 /* SEMC_A7 */
- MXRT1050_IOMUXC_GPIO_EMC_17_SEMC_ADDR08
- 0xf1 /* SEMC_A8 */
- MXRT1050_IOMUXC_GPIO_EMC_18_SEMC_ADDR09
- 0xf1 /* SEMC_A9 */
- MXRT1050_IOMUXC_GPIO_EMC_19_SEMC_ADDR11
- 0xf1 /* SEMC_A11 */
- MXRT1050_IOMUXC_GPIO_EMC_20_SEMC_ADDR12
- 0xf1 /* SEMC_A12 */
- MXRT1050_IOMUXC_GPIO_EMC_21_SEMC_BA0
- 0xf1 /* SEMC_BA0 */
- MXRT1050_IOMUXC_GPIO_EMC_22_SEMC_BA1
- 0xf1 /* SEMC_BA1 */
- MXRT1050_IOMUXC_GPIO_EMC_23_SEMC_ADDR10
- 0xf1 /* SEMC_A10 */
- MXRT1050_IOMUXC_GPIO_EMC_24_SEMC_CAS
- 0xf1 /* SEMC_CAS */
- MXRT1050_IOMUXC_GPIO_EMC_25_SEMC_RAS
- 0xf1 /* SEMC_RAS */
- MXRT1050_IOMUXC_GPIO_EMC_26_SEMC_CLK
- 0xf1 /* SEMC_CLK */
- MXRT1050_IOMUXC_GPIO_EMC_27_SEMC_CKE
- 0xf1 /* SEMC_CKE */
- MXRT1050_IOMUXC_GPIO_EMC_28_SEMC_WE
- 0xf1 /* SEMC_WE */
- MXRT1050_IOMUXC_GPIO_EMC_29_SEMC_CS0
- 0xf1 /* SEMC_CS0 */
- MXRT1050_IOMUXC_GPIO_EMC_30_SEMC_DA08
- 0xf1 /* SEMC_D8 */
- MXRT1050_IOMUXC_GPIO_EMC_31_SEMC_DA09
- 0xf1 /* SEMC_D9 */
- MXRT1050_IOMUXC_GPIO_EMC_32_SEMC_DA10
- 0xf1 /* SEMC_D10 */
- MXRT1050_IOMUXC_GPIO_EMC_33_SEMC_DA11
- 0xf1 /* SEMC_D11 */
- MXRT1050_IOMUXC_GPIO_EMC_34_SEMC_DA12
- 0xf1 /* SEMC_D12 */
- MXRT1050_IOMUXC_GPIO_EMC_35_SEMC_DA13
- 0xf1 /* SEMC_D13 */
- MXRT1050_IOMUXC_GPIO_EMC_36_SEMC_DA14
- 0xf1 /* SEMC_D14 */
- MXRT1050_IOMUXC_GPIO_EMC_37_SEMC_DA15
- 0xf1 /* SEMC_D15 */
- MXRT1050_IOMUXC_GPIO_EMC_38_SEMC_DM01
- 0xf1 /* SEMC_DM1 */
- MXRT1050_IOMUXC_GPIO_EMC_39_SEMC_DQS
- (IMX_PAD_SION | 0xf1) /* SEMC_DQS */
- >;
- };
-
- pinctrl_usdhc0: usdhc0grp {
- fsl,pins = <
- MXRT1050_IOMUXC_GPIO_B1_12_USDHC1_CD_B
- 0x1B000
- MXRT1050_IOMUXC_GPIO_B1_14_USDHC1_VSELECT
- 0xB069
- MXRT1050_IOMUXC_GPIO_SD_B0_00_USDHC1_CMD
- 0x17061
- MXRT1050_IOMUXC_GPIO_SD_B0_01_USDHC1_CLK
- 0x17061
- MXRT1050_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3
- 0x17061
- MXRT1050_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2
- 0x17061
- MXRT1050_IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1
- 0x17061
- MXRT1050_IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0
- 0x17061
- >;
- };
-
- pinctrl_lcdif: lcdifgrp {
- fsl,pins = <
- MXRT1050_IOMUXC_GPIO_B0_00_LCD_CLK 0x1b0b1
- MXRT1050_IOMUXC_GPIO_B0_01_LCD_ENABLE 0x1b0b1
- MXRT1050_IOMUXC_GPIO_B0_02_LCD_HSYNC 0x1b0b1
- MXRT1050_IOMUXC_GPIO_B0_03_LCD_VSYNC 0x1b0b1
- MXRT1050_IOMUXC_GPIO_B0_04_LCD_DATA00 0x1b0b1
- MXRT1050_IOMUXC_GPIO_B0_05_LCD_DATA01 0x1b0b1
- MXRT1050_IOMUXC_GPIO_B0_06_LCD_DATA02 0x1b0b1
- MXRT1050_IOMUXC_GPIO_B0_07_LCD_DATA03 0x1b0b1
- MXRT1050_IOMUXC_GPIO_B0_08_LCD_DATA04 0x1b0b1
- MXRT1050_IOMUXC_GPIO_B0_09_LCD_DATA05 0x1b0b1
- MXRT1050_IOMUXC_GPIO_B0_10_LCD_DATA06 0x1b0b1
- MXRT1050_IOMUXC_GPIO_B0_11_LCD_DATA07 0x1b0b1
- MXRT1050_IOMUXC_GPIO_B0_12_LCD_DATA08 0x1b0b1
- MXRT1050_IOMUXC_GPIO_B0_13_LCD_DATA09 0x1b0b1
- MXRT1050_IOMUXC_GPIO_B0_14_LCD_DATA10 0x1b0b1
- MXRT1050_IOMUXC_GPIO_B0_15_LCD_DATA11 0x1b0b1
- MXRT1050_IOMUXC_GPIO_B1_01_LCD_DATA13 0x1b0b1
- MXRT1050_IOMUXC_GPIO_B1_02_LCD_DATA14 0x1b0b1
- MXRT1050_IOMUXC_GPIO_B1_03_LCD_DATA15 0x1b0b1
- MXRT1050_IOMUXC_GPIO_B1_15_GPIO2_IO31 0x0b069
- MXRT1050_IOMUXC_GPIO_AD_B0_02_GPIO1_IO02 0x0b069
- >;
- };
+ pinctrl_lpuart1: lpuart1grp {
+ fsl,pins = <
+ MXRT1050_IOMUXC_GPIO_AD_B0_12_LPUART1_TXD 0xf1
+ MXRT1050_IOMUXC_GPIO_AD_B0_13_LPUART1_RXD 0xf1
+ >;
};
-};
-&gpt1 {
- status = "okay";
+ pinctrl_usdhc0: usdhc0grp {
+ fsl,pins = <
+ MXRT1050_IOMUXC_GPIO_B1_12_USDHC1_CD_B 0x1B000
+ MXRT1050_IOMUXC_GPIO_B1_14_USDHC1_VSELECT 0xB069
+ MXRT1050_IOMUXC_GPIO_SD_B0_00_USDHC1_CMD 0x17061
+ MXRT1050_IOMUXC_GPIO_SD_B0_01_USDHC1_CLK 0x17061
+ MXRT1050_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3 0x17061
+ MXRT1050_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2 0x17061
+ MXRT1050_IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1 0x17061
+ MXRT1050_IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0 0x17061
+ >;
+ };
};
&usdhc1 {
@@ -226,42 +67,6 @@
pinctrl-1 = <&pinctrl_usdhc0>;
pinctrl-2 = <&pinctrl_usdhc0>;
pinctrl-3 = <&pinctrl_usdhc0>;
- status = "okay";
-
cd-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
-};
-
-&lcdif {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcdif>;
- display = <&display0>;
- status = "okay";
-
- display0: display0 {
- bits-per-pixel = <16>;
- bus-width = <16>;
-
- display-timings {
- timing0: timing0 {
- clock-frequency = <9300000>;
- hactive = <480>;
- vactive = <272>;
- hback-porch = <4>;
- hfront-porch = <8>;
- vback-porch = <4>;
- vfront-porch = <8>;
- hsync-len = <41>;
- vsync-len = <10>;
- de-active = <1>;
- pixelclk-active = <0>;
- hsync-active = <0>;
- vsync-active = <0>;
- };
- };
- };
-};
-
-&usbotg1 {
- dr_mode = "host";
status = "okay";
};
diff --git a/arch/arm/dts/imxrt1050-pinfunc.h b/arch/arm/dts/imxrt1050-pinfunc.h
index a29031ab3d..22c14a3262 100644
--- a/arch/arm/dts/imxrt1050-pinfunc.h
+++ b/arch/arm/dts/imxrt1050-pinfunc.h
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
/*
* Copyright (C) 2019
* Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
diff --git a/arch/arm/dts/imxrt1050.dtsi b/arch/arm/dts/imxrt1050.dtsi
index 09f4712af6..03e6a858a7 100644
--- a/arch/arm/dts/imxrt1050.dtsi
+++ b/arch/arm/dts/imxrt1050.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2019
* Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
@@ -8,53 +8,37 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/imxrt1050-clock.h>
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/memory/imxrt-sdram.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
- aliases {
- display0 = &lcdif;
- gpio0 = &gpio1;
- gpio1 = &gpio2;
- gpio2 = &gpio3;
- gpio3 = &gpio4;
- gpio4 = &gpio5;
- mmc0 = &usdhc1;
- serial0 = &lpuart1;
- usbphy0 = &usbphy1;
- };
-
clocks {
osc: osc {
- compatible = "fsl,imx-osc", "fixed-clock";
+ compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
};
- };
- soc {
- semc: semc@402f0000 {
- compatible = "fsl,imxrt-semc";
- reg = <0x402f0000 0x4000>;
- clocks = <&clks IMXRT1050_CLK_SEMC>;
- pinctrl-0 = <&pinctrl_semc>;
- pinctrl-names = "default";
- status = "okay";
+ osc3M: osc3M {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <3000000>;
};
+ };
+ soc {
lpuart1: serial@40184000 {
- compatible = "fsl,imxrt-lpuart";
+ compatible = "fsl,imxrt1050-lpuart", "fsl,imx7ulp-lpuart";
reg = <0x40184000 0x4000>;
- interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <20>;
clocks = <&clks IMXRT1050_CLK_LPUART1>;
- clock-names = "per";
+ clock-names = "ipg";
status = "disabled";
};
- iomuxc: iomuxc@401f8000 {
- compatible = "fsl,imxrt-iomuxc";
+ iomuxc: pinctrl@401f8000 {
+ compatible = "fsl,imxrt1050-iomuxc";
reg = <0x401f8000 0x4000>;
fsl,mux_mask = <0x7>;
};
@@ -64,31 +48,61 @@
reg = <0x400d8000 0x4000>;
};
- clks: ccm@400fc000 {
+ clks: clock-controller@400fc000 {
compatible = "fsl,imxrt1050-ccm";
reg = <0x400fc000 0x4000>;
- interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <95>, <96>;
+ clocks = <&osc>;
+ clock-names = "osc";
#clock-cells = <1>;
- };
-
- usdhc1: usdhc@402c0000 {
- compatible = "fsl,imxrt-usdhc";
- reg = <0x402c0000 0x10000>;
- interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMXRT1050_CLK_USDHC1>;
- clock-names = "per";
+ assigned-clocks = <&clks IMXRT1050_CLK_PLL1_BYPASS>,
+ <&clks IMXRT1050_CLK_PLL1_BYPASS>,
+ <&clks IMXRT1050_CLK_PLL2_BYPASS>,
+ <&clks IMXRT1050_CLK_PLL3_BYPASS>,
+ <&clks IMXRT1050_CLK_PLL3_PFD1_664_62M>,
+ <&clks IMXRT1050_CLK_PLL2_PFD2_396M>;
+ assigned-clock-parents = <&clks IMXRT1050_CLK_PLL1_REF_SEL>,
+ <&clks IMXRT1050_CLK_PLL1_ARM>,
+ <&clks IMXRT1050_CLK_PLL2_SYS>,
+ <&clks IMXRT1050_CLK_PLL3_USB_OTG>,
+ <&clks IMXRT1050_CLK_PLL3_USB_OTG>,
+ <&clks IMXRT1050_CLK_PLL2_SYS>;
+ };
+
+ edma1: dma-controller@400e8000 {
+ #dma-cells = <2>;
+ compatible = "fsl,imx7ulp-edma";
+ reg = <0x400e8000 0x4000>,
+ <0x400ec000 0x4000>;
+ dma-channels = <32>;
+ interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>, <8>,
+ <9>, <10>, <11>, <12>, <13>, <14>, <15>, <16>;
+ clock-names = "dma", "dmamux0";
+ clocks = <&clks IMXRT1050_CLK_DMA>,
+ <&clks IMXRT1050_CLK_DMA_MUX>;
+ };
+
+ usdhc1: mmc@402c0000 {
+ compatible = "fsl,imxrt1050-usdhc", "fsl,imx6sl-usdhc";
+ reg = <0x402c0000 0x4000>;
+ interrupts = <110>;
+ clocks = <&clks IMXRT1050_CLK_IPG_PDOF>,
+ <&clks IMXRT1050_CLK_OSC>,
+ <&clks IMXRT1050_CLK_USDHC1>;
+ clock-names = "ipg", "ahb", "per";
bus-width = <4>;
+ fsl,wp-controller;
+ no-1-8-v;
+ max-frequency = <4000000>;
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
status = "disabled";
};
gpio1: gpio@401b8000 {
- compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
+ compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
reg = <0x401b8000 0x4000>;
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <80>, <81>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -96,10 +110,9 @@
};
gpio2: gpio@401bc000 {
- compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
+ compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
reg = <0x401bc000 0x4000>;
- interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <82>, <83>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -107,10 +120,9 @@
};
gpio3: gpio@401c0000 {
- compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
+ compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
reg = <0x401c0000 0x4000>;
- interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <84>, <85>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -118,10 +130,9 @@
};
gpio4: gpio@401c4000 {
- compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
+ compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
reg = <0x401c4000 0x4000>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <86>, <87>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -129,60 +140,21 @@
};
gpio5: gpio@400c0000 {
- compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
+ compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
reg = <0x400c0000 0x4000>;
- interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <88>, <89>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
- lcdif: lcdif@402b8000 {
- compatible = "fsl,imxrt-lcdif";
- reg = <0x402b8000 0x4000>;
- interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMXRT1050_CLK_LCDIF_PIX>,
- <&clks IMXRT1050_CLK_LCDIF_APB>;
- clock-names = "pix", "axi";
- assigned-clocks = <&clks IMXRT1050_CLK_LCDIF_SEL>;
- assigned-clock-parents = <&clks IMXRT1050_CLK_PLL5_VIDEO>;
- status = "disabled";
- };
-
- gpt1: gpt1@401ec000 {
- compatible = "fsl,imxrt-gpt";
+ gpt: timer@401ec000 {
+ compatible = "fsl,imxrt1050-gpt", "fsl,imx6dl-gpt", "fsl,imx6sl-gpt";
reg = <0x401ec000 0x4000>;
interrupts = <100>;
- clocks = <&osc>;
- status = "disabled";
- };
-
- usbphy1: usbphy@400d9000 {
- compatible = "fsl,imxrt-usbphy";
- reg = <0x400d9000 0x1000>;
- interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- usbmisc: usbmisc@402e0800 {
- #index-cells = <1>;
- compatible = "fsl,imxrt-usbmisc";
- reg = <0x402e0800 0x200>;
- clocks = <&clks IMXRT1050_CLK_USBOH3>;
- };
-
- usbotg1: usb@402e0000 {
- compatible = "fsl,imxrt-usb", "fsl,imx27-usb";
- reg = <0x402e0000 0x200>;
- interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMXRT1050_CLK_USBOH3>;
- fsl,usbphy = <&usbphy1>;
- fsl,usbmisc = <&usbmisc 0>;
- ahb-burst-config = <0x0>;
- tx-burst-size-dword = <0x10>;
- rx-burst-size-dword = <0x10>;
- status = "disabled";
+ clocks = <&osc3M>;
+ clock-names = "per";
};
};
};
diff --git a/include/dt-bindings/clock/imxrt1050-clock.h b/include/dt-bindings/clock/imxrt1050-clock.h
index f74dbbcf93..93bef0832d 100644
--- a/include/dt-bindings/clock/imxrt1050-clock.h
+++ b/include/dt-bindings/clock/imxrt1050-clock.h
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
/*
* Copyright(C) 2019
* Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
@@ -62,6 +62,11 @@
#define IMXRT1050_CLK_PLL7_USB_HOST 53
#define IMXRT1050_CLK_LCDIF_PIX 54
#define IMXRT1050_CLK_USBOH3 55
-#define IMXRT1050_CLK_END 56
+#define IMXRT1050_CLK_IPG_PDOF 56
+#define IMXRT1050_CLK_PER_CLK_SEL 57
+#define IMXRT1050_CLK_PER_PDOF 58
+#define IMXRT1050_CLK_DMA 59
+#define IMXRT1050_CLK_DMA_MUX 60
+#define IMXRT1050_CLK_END 61
#endif /* __DT_BINDINGS_CLOCK_IMXRT1050_H */
--
2.35.1
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH v5 4/8] imx8ulp: synchronise device tree with linux
2022-11-07 21:22 [PATCH v5 0/8] arm: dts: imx: sync device trees with upstream linux kernel part 1 Marcel Ziswiler
` (2 preceding siblings ...)
2022-11-07 21:22 ` [PATCH v5 3/8] imxrt1050: synchronise device tree with linux Marcel Ziswiler
@ 2022-11-07 21:22 ` Marcel Ziswiler
2022-11-08 16:39 ` sbabic
2022-11-07 21:22 ` [PATCH v5 5/8] imx8mq: " Marcel Ziswiler
` (4 subsequent siblings)
8 siblings, 1 reply; 19+ messages in thread
From: Marcel Ziswiler @ 2022-11-07 21:22 UTC (permalink / raw)
To: u-boot
Cc: Giulio Benetti, Fabio Estevam, Jesse Taube, Marcel Ziswiler,
NXP i.MX U-Boot Team, Stefano Babic
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Synchronise device tree with linux v6.1-rc3.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
(no changes since v4)
Changes in v4:
- Re-synched with v6.1-rc3.
Changes in v2:
- imx8ulp: Re-added s400_mu device tree node.
arch/arm/dts/imx8ulp-evk-u-boot.dtsi | 15 +-
arch/arm/dts/imx8ulp-evk.dts | 240 ++-----
arch/arm/dts/imx8ulp-pinfunc.h | 4 +-
arch/arm/dts/imx8ulp.dtsi | 594 +++++-------------
include/dt-bindings/clock/imx8ulp-clock.h | 53 +-
include/dt-bindings/power/imx8ulp-power.h | 26 +
include/dt-bindings/reset/imx8ulp-pcc-reset.h | 59 ++
7 files changed, 369 insertions(+), 622 deletions(-)
create mode 100644 include/dt-bindings/power/imx8ulp-power.h
create mode 100644 include/dt-bindings/reset/imx8ulp-pcc-reset.h
diff --git a/arch/arm/dts/imx8ulp-evk-u-boot.dtsi b/arch/arm/dts/imx8ulp-evk-u-boot.dtsi
index 7c1dab2acf..ad264f271e 100644
--- a/arch/arm/dts/imx8ulp-evk-u-boot.dtsi
+++ b/arch/arm/dts/imx8ulp-evk-u-boot.dtsi
@@ -3,7 +3,16 @@
* Copyright 2021 NXP
*/
-&{/soc@0} {
+/ {
+ mu@27020000 {
+ compatible = "fsl,imx8ulp-mu";
+ reg = <0 0x27020000 0 0x10000>;
+ status = "okay";
+ u-boot,dm-spl;
+ };
+};
+
+&soc {
u-boot,dm-spl;
};
@@ -23,10 +32,6 @@
u-boot,dm-spl;
};
-&s400_mu {
- u-boot,dm-spl;
-};
-
&lpuart5 {
u-boot,dm-spl;
};
diff --git a/arch/arm/dts/imx8ulp-evk.dts b/arch/arm/dts/imx8ulp-evk.dts
index da09ff48ff..f1c6d933a1 100644
--- a/arch/arm/dts/imx8ulp-evk.dts
+++ b/arch/arm/dts/imx8ulp-evk.dts
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2021 NXP
*/
@@ -8,17 +8,31 @@
#include "imx8ulp.dtsi"
/ {
- model = "FSL i.MX8ULP EVK";
+ model = "NXP i.MX8ULP EVK";
compatible = "fsl,imx8ulp-evk", "fsl,imx8ulp";
chosen {
stdout-path = &lpuart5;
- bootargs = "console=ttyLP1,115200 earlycon";
};
- usdhc2_pwrseq: usdhc2_pwrseq {
- compatible = "mmc-pwrseq-simple";
- reset-gpios = <&pcal6408 2 GPIO_ACTIVE_LOW>;
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0 0x80000000>;
+ };
+
+ clock_ext_rmii: clock-ext-rmii {
+ compatible = "fixed-clock";
+ clock-frequency = <50000000>;
+ clock-output-names = "ext_rmii_clk";
+ #clock-cells = <0>;
+ };
+
+ clock_ext_ts: clock-ext-ts {
+ compatible = "fixed-clock";
+ /* External ts clock is 50MHZ from PHY on EVK board. */
+ clock-frequency = <50000000>;
+ clock-output-names = "ext_ts_clk";
+ #clock-cells = <0>;
};
};
@@ -30,161 +44,30 @@
status = "okay";
};
-&iomuxc1 {
- pinctrl_lpuart5: lpuart5grp {
- fsl,pins = <
- MX8ULP_PAD_PTF14__LPUART5_TX 0x03
- MX8ULP_PAD_PTF15__LPUART5_RX 0x03
- >;
- };
-
- pinctrl_lpi2c7: lpi2c7grp {
- fsl,pins = <
- MX8ULP_PAD_PTE12__LPI2C7_SCL 0x27
- MX8ULP_PAD_PTE13__LPI2C7_SDA 0x27
- >;
- };
-
- pinctrl_usdhc0: usdhc0grp {
- fsl,pins = <
- MX8ULP_PAD_PTD0__SDHC0_RESET_B 0x43
- MX8ULP_PAD_PTD1__SDHC0_CMD 0x43
- MX8ULP_PAD_PTD2__SDHC0_CLK 0x10042
- MX8ULP_PAD_PTD10__SDHC0_D0 0x43
- MX8ULP_PAD_PTD9__SDHC0_D1 0x43
- MX8ULP_PAD_PTD8__SDHC0_D2 0x43
- MX8ULP_PAD_PTD7__SDHC0_D3 0x43
- MX8ULP_PAD_PTD6__SDHC0_D4 0x43
- MX8ULP_PAD_PTD5__SDHC0_D5 0x43
- MX8ULP_PAD_PTD4__SDHC0_D6 0x43
- MX8ULP_PAD_PTD3__SDHC0_D7 0x43
- MX8ULP_PAD_PTD11__SDHC0_DQS 0x10042
- >;
- };
-
- pinctrl_usdhc2_pte: usdhc2ptegrp {
- fsl,pins = <
- MX8ULP_PAD_PTE1__SDHC2_D0 0x43
- MX8ULP_PAD_PTE0__SDHC2_D1 0x43
- MX8ULP_PAD_PTE5__SDHC2_D2 0x43
- MX8ULP_PAD_PTE4__SDHC2_D3 0x43
- MX8ULP_PAD_PTE2__SDHC2_CLK 0x10042
- MX8ULP_PAD_PTE3__SDHC2_CMD 0x43
- MX8ULP_PAD_PTE7__PTE7 0x10003
- >;
- };
-
- pinctrl_fec: fecgrp {
- fsl,pins = <
- MX8ULP_PAD_PTE14__ENET0_MDIO 0x43
- MX8ULP_PAD_PTE15__ENET0_MDC 0x43
- MX8ULP_PAD_PTE18__ENET0_CRS_DV 0x43
- MX8ULP_PAD_PTE17__ENET0_RXER 0x43
- MX8ULP_PAD_PTF1__ENET0_RXD0 0x43
- MX8ULP_PAD_PTE20__ENET0_RXD1 0x43
- MX8ULP_PAD_PTE16__ENET0_TXEN 0x43
- MX8ULP_PAD_PTE23__ENET0_TXD0 0x43
- MX8ULP_PAD_PTE22__ENET0_TXD1 0x43
- MX8ULP_PAD_PTE19__ENET0_REFCLK 0x10043
- MX8ULP_PAD_PTF10__ENET0_1588_CLKIN 0x10043
- >;
- };
-
- pinctrl_usbotg0_id: otg0idgrp {
- fsl,pins = <
- MX8ULP_PAD_PTF2__USB0_ID 0x10003
- >;
- };
-
- pinctrl_usbotg1_id: otg1idgrp {
- fsl,pins = <
- MX8ULP_PAD_PTD23__USB1_ID 0x10003
- >;
- };
-};
-
&usdhc0 {
- pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-names = "default", "sleep";
pinctrl-0 = <&pinctrl_usdhc0>;
pinctrl-1 = <&pinctrl_usdhc0>;
- pinctrl-2 = <&pinctrl_usdhc0>;
- bus-width = <8>;
- non-removable;
- status = "okay";
-};
-
-&usdhc2 {
- pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
- pinctrl-0 = <&pinctrl_usdhc2_pte>;
- pinctrl-1 = <&pinctrl_usdhc2_pte>;
- pinctrl-2 = <&pinctrl_usdhc2_pte>;
- pinctrl-3 = <&pinctrl_usdhc2_pte>;
- mmc-pwrseq = <&usdhc2_pwrseq>;
- max-frequency = <100000000>;
- bus-width = <4>;
- keep-power-in-suspend;
non-removable;
- wakeup-source;
- status = "okay";
-
- wifi_wake_host {
- compatible = "nxp,wifi-wake-host";
- interrupt-parent = <&gpioe>;
- interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
- interrupt-names = "host-wake";
- };
-};
-
-&lpi2c7 {
- #address-cells = <1>;
- #size-cells = <0>;
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lpi2c7>;
- status = "okay";
-
- pcal6408: gpio@21 {
- compatible = "ti,tca6408";
- reg = <0x21>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-};
-
-&flexspi0 {
- status = "okay";
-
- flash0: atxp032@0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <66000000>;
- };
-};
-
-&flexspi2 {
+ bus-width = <8>;
status = "okay";
-
- flash1: mt35xu512aba@0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <29000000>;
- spi-nor,ddr-quad-read-dummy = <8>;
- };
};
&fec {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_enet>;
+ pinctrl-1 = <&pinctrl_enet>;
+ clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>,
+ <&pcc4 IMX8ULP_CLK_ENET>,
+ <&cgc1 IMX8ULP_CLK_ENET_TS_SEL>,
+ <&clock_ext_rmii>;
+ clock-names = "ipg", "ahb", "ptp", "enet_clk_ref";
+ assigned-clocks = <&cgc1 IMX8ULP_CLK_ENET_TS_SEL>;
+ assigned-clock-parents = <&clock_ext_ts>;
phy-mode = "rmii";
phy-handle = <ðphy>;
status = "okay";
- phy-reset-gpios = <&pcal6408 4 GPIO_ACTIVE_LOW>;
-
mdio {
#address-cells = <1>;
#size-cells = <0>;
@@ -196,28 +79,43 @@
};
};
-&usbotg0 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbotg0_id>;
- srp-disable;
- hnp-disable;
- adp-disable;
- status = "okay";
-};
-
-&usbphy0 {
- fsl,tx-d-cal = <88>;
-};
+&iomuxc1 {
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX8ULP_PAD_PTE15__ENET0_MDC 0x43
+ MX8ULP_PAD_PTE14__ENET0_MDIO 0x43
+ MX8ULP_PAD_PTE17__ENET0_RXER 0x43
+ MX8ULP_PAD_PTE18__ENET0_CRS_DV 0x43
+ MX8ULP_PAD_PTF1__ENET0_RXD0 0x43
+ MX8ULP_PAD_PTE20__ENET0_RXD1 0x43
+ MX8ULP_PAD_PTE16__ENET0_TXEN 0x43
+ MX8ULP_PAD_PTE23__ENET0_TXD0 0x43
+ MX8ULP_PAD_PTE22__ENET0_TXD1 0x43
+ MX8ULP_PAD_PTE19__ENET0_REFCLK 0x43
+ MX8ULP_PAD_PTF10__ENET0_1588_CLKIN 0x43
+ >;
+ };
-&usbotg1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbotg1_id>;
- srp-disable;
- hnp-disable;
- adp-disable;
- status = "okay";
-};
+ pinctrl_lpuart5: lpuart5grp {
+ fsl,pins = <
+ MX8ULP_PAD_PTF14__LPUART5_TX 0x3
+ MX8ULP_PAD_PTF15__LPUART5_RX 0x3
+ >;
+ };
-&usbphy1 {
- fsl,tx-d-cal = <88>;
+ pinctrl_usdhc0: usdhc0grp {
+ fsl,pins = <
+ MX8ULP_PAD_PTD1__SDHC0_CMD 0x43
+ MX8ULP_PAD_PTD2__SDHC0_CLK 0x10042
+ MX8ULP_PAD_PTD10__SDHC0_D0 0x43
+ MX8ULP_PAD_PTD9__SDHC0_D1 0x43
+ MX8ULP_PAD_PTD8__SDHC0_D2 0x43
+ MX8ULP_PAD_PTD7__SDHC0_D3 0x43
+ MX8ULP_PAD_PTD6__SDHC0_D4 0x43
+ MX8ULP_PAD_PTD5__SDHC0_D5 0x43
+ MX8ULP_PAD_PTD4__SDHC0_D6 0x43
+ MX8ULP_PAD_PTD3__SDHC0_D7 0x43
+ MX8ULP_PAD_PTD11__SDHC0_DQS 0x10042
+ >;
+ };
};
diff --git a/arch/arm/dts/imx8ulp-pinfunc.h b/arch/arm/dts/imx8ulp-pinfunc.h
index c21c3b644e..b204ac79b4 100644
--- a/arch/arm/dts/imx8ulp-pinfunc.h
+++ b/arch/arm/dts/imx8ulp-pinfunc.h
@@ -1,6 +1,6 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
+/* SPDX-License-Identifier: GPL-2.0+ OR MIT */
/*
- * Copyright 2020 NXP
+ * Copyright 2021 NXP
*/
#ifndef __DTS_IMX8ULP_PINFUNC_H
diff --git a/arch/arm/dts/imx8ulp.dtsi b/arch/arm/dts/imx8ulp.dtsi
index d3b16bd2fe..06ce5f19aa 100644
--- a/arch/arm/dts/imx8ulp.dtsi
+++ b/arch/arm/dts/imx8ulp.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2021 NXP
*/
@@ -6,6 +6,8 @@
#include <dt-bindings/clock/imx8ulp-clock.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/imx8ulp-power.h>
+
#include "imx8ulp-pinfunc.h"
/ {
@@ -14,49 +16,29 @@
#size-cells = <2>;
aliases {
+ ethernet0 = &fec;
gpio0 = &gpiod;
gpio1 = &gpioe;
gpio2 = &gpiof;
- serial0 = &lpuart5;
mmc0 = &usdhc0;
mmc1 = &usdhc1;
mmc2 = &usdhc2;
- spi0 = &flexspi0;
- spi2 = &flexspi2;
- ethernet0 = &fec;
- i2c7 = &lpi2c7;
- usbphy0 = &usbphy0;
- usb0 = &usbotg0;
- usbphy1 = &usbphy1;
- usb1 = &usbotg1;
+ serial0 = &lpuart4;
+ serial1 = &lpuart5;
+ serial2 = &lpuart6;
+ serial3 = &lpuart7;
};
- cpus: cpus {
+ cpus {
#address-cells = <2>;
#size-cells = <0>;
- idle-states {
- entry-method = "psci";
-
- CPU_SLEEP: cpu-sleep {
- compatible = "arm,idle-state";
- arm,psci-suspend-param = <0x0010033>;
- local-timer-stop;
- entry-latency-us = <1000>;
- exit-latency-us = <700>;
- min-residency-us = <2700>;
- wakeup-latency-us = <1500>;
- };
- };
-
- /* We have 1 clusters with 4 Cortex-A35 cores */
A35_0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a35";
reg = <0x0 0x0>;
enable-method = "psci";
next-level-cache = <&A35_L2>;
- clocks = <&cgc1 IMX8ULP_CLK_A35_DIV>;
};
A35_1: cpu@1 {
@@ -65,7 +47,6 @@
reg = <0x0 0x1>;
enable-method = "psci";
next-level-cache = <&A35_L2>;
- clocks = <&cgc1 IMX8ULP_CLK_A35_DIV>;
};
A35_L2: l2-cache0 {
@@ -73,37 +54,6 @@
};
};
- a35_opp_table: opp-table {
- compatible = "operating-points-v2";
- opp-shared;
-
- opp-504000000 {
- opp-hz = /bits/ 64 <504000000>;
- opp-microvolt = <800000>;
- clock-latency-ns = <150000>;
- };
-
- opp-744000000 {
- opp-hz = /bits/ 64 <744000000>;
- opp-microvolt = <900000>;
- clock-latency-ns = <150000>;
- };
-
- opp-1008000000 {
- opp-hz = /bits/ 64 <1008000000>;
- opp-microvolt = <1000000>;
- clock-latency-ns = <150000>;
- opp-suspend;
- };
- };
-
- s400_mu: mu@27020000 {
- u-boot,dm-spl;
- compatible = "fsl,imx8ulp-mu";
- reg = <0 0x27020000 0 0x10000>;
- status = "okay";
- };
-
gic: interrupt-controller@2d400000 {
compatible = "arm,gic-v3";
reg = <0x0 0x2d400000 0 0x10000>, /* GIC Dist */
@@ -113,6 +63,14 @@
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
+ pmu {
+ compatible = "arm,cortex-a35-pmu";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 7
+ (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupt-affinity = <&A35_0>, <&A35_1>;
+ };
+
psci {
compatible = "arm,psci-1.0";
method = "smc";
@@ -154,7 +112,7 @@
#clock-cells = <0>;
};
- sram@0x2201f000 {
+ sram@2201f000 {
compatible = "mmio-sram";
reg = <0x0 0x2201f000 0x0 0x1000>;
@@ -162,10 +120,9 @@
#size-cells = <1>;
ranges = <0 0x0 0x2201f000 0x1000>;
- /* TODO: split or unify */
- scmi_pd: scmi_pd@0 {
+ scmi_buf: scmi-sram-section@0 {
compatible = "arm,scmi-shmem";
- reg = <0x0 0x200>;
+ reg = <0x0 0x400>;
};
};
@@ -175,41 +132,31 @@
arm,smc-id = <0xc20000fe>;
#address-cells = <1>;
#size-cells = <0>;
- shmem = <&scmi_pd>;
+ shmem = <&scmi_buf>;
scmi_devpd: protocol@11 {
reg = <0x11>;
#power-domain-cells = <1>;
};
- scmi_perf: protocol@13 {
- reg = <0x13>;
+ scmi_sensor: protocol@15 {
+ reg = <0x15>;
+ #thermal-sensor-cells = <1>;
};
};
};
- soc@0 {
+ soc: soc@0 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0x0 0x0 0x0 0x80000000>;
+ ranges = <0x0 0x0 0x0 0x40000000>;
- per_bridge0: bus@28000000 {
- compatible = "simple-bus";
- reg = <0x28000000 0x800000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- flexspi0: flexspi@28039000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "nxp,imx8ulp-fspi";
- reg = <0x28039000 0x10000>,
- <0x04000000 0x7ffffff>;
- reg-names = "fspi_base", "fspi_mmap";
- status = "disabled";
- };
+ s4muap: mailbox@27020000 {
+ compatible = "fsl,imx8ulp-mu-s4";
+ reg = <0x27020000 0x10000>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <2>;
};
per_bridge3: bus@29000000 {
@@ -219,110 +166,21 @@
#size-cells = <1>;
ranges;
- edma1: dma-controller@29010000 {
- compatible = "fsl,imx8ulp-edma";
- reg = <0x29010000 0x10000>,
- <0x29020000 0x10000>, <0x29030000 0x10000>,
- <0x29040000 0x10000>, <0x29050000 0x10000>,
- <0x29060000 0x10000>, <0x29070000 0x10000>,
- <0x29080000 0x10000>, <0x29090000 0x10000>,
- <0x290a0000 0x10000>, <0x290b0000 0x10000>,
- <0x290c0000 0x10000>, <0x290d0000 0x10000>,
- <0x290e0000 0x10000>, <0x290f0000 0x10000>,
- <0x29100000 0x10000>, <0x29110000 0x10000>,
- <0x29120000 0x10000>, <0x29130000 0x10000>,
- <0x29140000 0x10000>, <0x29150000 0x10000>,
- <0x29160000 0x10000>, <0x29170000 0x10000>,
- <0x29180000 0x10000>, <0x29190000 0x10000>,
- <0x291a0000 0x10000>, <0x291b0000 0x10000>,
- <0x291c0000 0x10000>, <0x291d0000 0x10000>,
- <0x291e0000 0x10000>, <0x291f0000 0x10000>,
- <0x29200000 0x10000>, <0x29210000 0x10000>;
- #dma-cells = <3>;
- dma-channels = <32>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "edma1-chan0-tx", "edma1-chan1-tx",
- "edma1-chan2-tx", "edma1-chan3-tx",
- "edma1-chan4-tx", "edma1-chan5-tx",
- "edma1-chan6-tx", "edma1-chan7-tx",
- "edma1-chan8-tx", "edma1-chan9-tx",
- "edma1-chan10-tx", "edma1-chan11-tx",
- "edma1-chan12-tx", "edma1-chan13-tx",
- "edma1-chan14-tx", "edma1-chan15-tx",
- "edma1-chan16-tx", "edma1-chan17-tx",
- "edma1-chan18-tx", "edma1-chan19-tx",
- "edma1-chan20-tx", "edma1-chan21-tx",
- "edma1-chan22-tx", "edma1-chan23-tx",
- "edma1-chan24-tx", "edma1-chan25-tx",
- "edma1-chan26-tx", "edma1-chan27-tx",
- "edma1-chan28-tx", "edma1-chan29-tx",
- "edma1-chan30-tx", "edma1-chan31-tx";
- clocks = <&pcc3 IMX8ULP_CLK_DMA1_MP>,
- <&pcc3 IMX8ULP_CLK_DMA1_CH0>, <&pcc3 IMX8ULP_CLK_DMA1_CH1>,
- <&pcc3 IMX8ULP_CLK_DMA1_CH2>, <&pcc3 IMX8ULP_CLK_DMA1_CH3>,
- <&pcc3 IMX8ULP_CLK_DMA1_CH4>, <&pcc3 IMX8ULP_CLK_DMA1_CH5>,
- <&pcc3 IMX8ULP_CLK_DMA1_CH6>, <&pcc3 IMX8ULP_CLK_DMA1_CH7>,
- <&pcc3 IMX8ULP_CLK_DMA1_CH8>, <&pcc3 IMX8ULP_CLK_DMA1_CH9>,
- <&pcc3 IMX8ULP_CLK_DMA1_CH10>, <&pcc3 IMX8ULP_CLK_DMA1_CH11>,
- <&pcc3 IMX8ULP_CLK_DMA1_CH12>, <&pcc3 IMX8ULP_CLK_DMA1_CH13>,
- <&pcc3 IMX8ULP_CLK_DMA1_CH14>, <&pcc3 IMX8ULP_CLK_DMA1_CH15>,
- <&pcc3 IMX8ULP_CLK_DMA1_CH16>, <&pcc3 IMX8ULP_CLK_DMA1_CH17>,
- <&pcc3 IMX8ULP_CLK_DMA1_CH18>, <&pcc3 IMX8ULP_CLK_DMA1_CH19>,
- <&pcc3 IMX8ULP_CLK_DMA1_CH20>, <&pcc3 IMX8ULP_CLK_DMA1_CH21>,
- <&pcc3 IMX8ULP_CLK_DMA1_CH22>, <&pcc3 IMX8ULP_CLK_DMA1_CH23>,
- <&pcc3 IMX8ULP_CLK_DMA1_CH24>, <&pcc3 IMX8ULP_CLK_DMA1_CH25>,
- <&pcc3 IMX8ULP_CLK_DMA1_CH26>, <&pcc3 IMX8ULP_CLK_DMA1_CH27>,
- <&pcc3 IMX8ULP_CLK_DMA1_CH28>, <&pcc3 IMX8ULP_CLK_DMA1_CH29>,
- <&pcc3 IMX8ULP_CLK_DMA1_CH30>, <&pcc3 IMX8ULP_CLK_DMA1_CH31>;
- clock-names = "edma-mp-clk",
- "edma1-chan0-clk", "edma1-chan1-clk",
- "edma1-chan2-clk", "edma1-chan3-clk",
- "edma1-chan4-clk", "edma1-chan5-clk",
- "edma1-chan6-clk", "edma1-chan7-clk",
- "edma1-chan8-clk", "edma1-chan9-clk",
- "edma1-chan10-clk", "edma1-chan11-clk",
- "edma1-chan12-clk", "edma1-chan13-clk",
- "edma1-chan14-clk", "edma1-chan15-clk",
- "edma1-chan16-clk", "edma1-chan17-clk",
- "edma1-chan18-clk", "edma1-chan19-clk",
- "edma1-chan20-clk", "edma1-chan21-clk",
- "edma1-chan22-clk", "edma1-chan23-clk",
- "edma1-chan24-clk", "edma1-chan25-clk",
- "edma1-chan26-clk", "edma1-chan27-clk",
- "edma1-chan28-clk", "edma1-chan29-clk",
- "edma1-chan30-clk", "edma1-chan31-clk";
- status = "okay";
+ mu: mailbox@29220000 {
+ compatible = "fsl,imx8ulp-mu";
+ reg = <0x29220000 0x10000>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <2>;
+ status = "disabled";
+ };
+
+ mu3: mailbox@29230000 {
+ compatible = "fsl,imx8ulp-mu";
+ reg = <0x29230000 0x10000>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pcc3 IMX8ULP_CLK_MU3_A>;
+ #mbox-cells = <2>;
+ status = "disabled";
};
wdog3: watchdog@292a0000 {
@@ -331,15 +189,13 @@
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pcc3 IMX8ULP_CLK_WDOG3>;
assigned-clocks = <&pcc3 IMX8ULP_CLK_WDOG3>;
- assigned-clocks-parents = <&cgc1 IMX8ULP_CLK_SOSC_DIV2>;
+ assigned-clock-parents = <&cgc1 IMX8ULP_CLK_SOSC_DIV2>;
timeout-sec = <40>;
};
cgc1: clock-controller@292c0000 {
compatible = "fsl,imx8ulp-cgc1";
reg = <0x292c0000 0x10000>;
- clocks = <&rosc>, <&sosc>, <&frosc>, <&lposc>;
- clock-names = "rosc", "sosc", "frosc", "lposc";
#clock-cells = <1>;
};
@@ -347,6 +203,7 @@
compatible = "fsl,imx8ulp-pcc3";
reg = <0x292d0000 0x10000>;
#clock-cells = <1>;
+ #reset-cells = <1>;
};
tpm5: tpm@29340000 {
@@ -356,6 +213,33 @@
clocks = <&pcc3 IMX8ULP_CLK_TPM5>,
<&pcc3 IMX8ULP_CLK_TPM5>;
clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ lpi2c4: i2c@29370000 {
+ compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x29370000 0x10000>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pcc3 IMX8ULP_CLK_LPI2C4>,
+ <&pcc3 IMX8ULP_CLK_LPI2C4>;
+ clock-names = "per", "ipg";
+ assigned-clocks = <&pcc3 IMX8ULP_CLK_LPI2C4>;
+ assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>;
+ assigned-clock-rates = <48000000>;
+ status = "disabled";
+ };
+
+ lpi2c5: i2c@29380000 {
+ compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c";
+ reg = <0x29380000 0x10000>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pcc3 IMX8ULP_CLK_LPI2C5>,
+ <&pcc3 IMX8ULP_CLK_LPI2C5>;
+ clock-names = "per", "ipg";
+ assigned-clocks = <&pcc3 IMX8ULP_CLK_LPI2C5>;
+ assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>;
+ assigned-clock-rates = <48000000>;
+ status = "disabled";
};
lpuart4: serial@29390000 {
@@ -370,10 +254,41 @@
lpuart5: serial@293a0000 {
compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
reg = <0x293a0000 0x1000>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pcc3 IMX8ULP_CLK_LPUART5>;
clock-names = "ipg";
status = "disabled";
};
+
+ lpspi4: spi@293b0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx8ulp-spi", "fsl,imx7ulp-spi";
+ reg = <0x293b0000 0x10000>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pcc3 IMX8ULP_CLK_LPSPI4>,
+ <&pcc3 IMX8ULP_CLK_LPSPI4>;
+ clock-names = "per", "ipg";
+ assigned-clocks = <&pcc3 IMX8ULP_CLK_LPSPI4>;
+ assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>;
+ assigned-clock-rates = <48000000>;
+ status = "disabled";
+ };
+
+ lpspi5: spi@293c0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx8ulp-spi", "fsl,imx7ulp-spi";
+ reg = <0x293c0000 0x10000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pcc3 IMX8ULP_CLK_LPSPI5>,
+ <&pcc3 IMX8ULP_CLK_LPSPI5>;
+ clock-names = "per", "ipg";
+ assigned-clocks = <&pcc3 IMX8ULP_CLK_LPSPI5>;
+ assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>;
+ assigned-clock-rates = <48000000>;
+ status = "disabled";
+ };
};
per_bridge4: bus@29800000 {
@@ -387,77 +302,84 @@
compatible = "fsl,imx8ulp-pcc4";
reg = <0x29800000 0x10000>;
#clock-cells = <1>;
+ #reset-cells = <1>;
};
- lpi2c6: lpi2c6@29840000 {
+ lpi2c6: i2c@29840000 {
compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c";
reg = <0x29840000 0x10000>;
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pcc4 IMX8ULP_CLK_LPI2C6>,
<&pcc4 IMX8ULP_CLK_LPI2C6>;
clock-names = "per", "ipg";
+ assigned-clocks = <&pcc4 IMX8ULP_CLK_LPI2C6>;
+ assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>;
+ assigned-clock-rates = <48000000>;
status = "disabled";
};
- lpi2c7: lpi2c7@29850000 {
+ lpi2c7: i2c@29850000 {
compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c";
reg = <0x29850000 0x10000>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pcc4 IMX8ULP_CLK_LPI2C7>,
<&pcc4 IMX8ULP_CLK_LPI2C7>;
clock-names = "per", "ipg";
+ assigned-clocks = <&pcc4 IMX8ULP_CLK_LPI2C7>;
+ assigned-clock-parents = <&cgc1 IMX8ULP_CLK_FROSC_DIV2>;
+ assigned-clock-rates = <48000000>;
status = "disabled";
};
- flexspi2: flexspi@29810000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "nxp,imx8ulp-fspi";
- reg = <0x29810000 0x10000>,
- <0x60000000 0xfffffff>;
- reg-names = "fspi_base", "fspi_mmap";
+ lpuart6: serial@29860000 {
+ compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+ reg = <0x29860000 0x1000>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pcc4 IMX8ULP_CLK_LPUART6>;
+ clock-names = "ipg";
status = "disabled";
};
- flexspi2_nand: flexspi2_nand@29810000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx8-fspi-nand";
- reg = <0x29810000 0x10000>, <0x60000000 0x10000000>;
- reg-names = "FlexSPI", "FlexSPI-memory";
+ lpuart7: serial@29870000 {
+ compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+ reg = <0x29870000 0x1000>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pcc4 IMX8ULP_CLK_LPUART7>;
+ clock-names = "ipg";
status = "disabled";
};
iomuxc1: pinctrl@298c0000 {
compatible = "fsl,imx8ulp-iomuxc1";
reg = <0x298c0000 0x10000>;
- fsl,mux_mask = <0xf00>;
};
usdhc0: mmc@298d0000 {
- compatible = "fsl,imx8ulp-usdhc", "fsl,imx7ulp-usdhc";
+ compatible = "fsl,imx8ulp-usdhc", "fsl,imx8mm-usdhc";
reg = <0x298d0000 0x10000>;
interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cgc1 IMX8ULP_CLK_DUMMY>,
- <&cgc1 IMX8ULP_CLK_DUMMY>,
+ clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>,
+ <&cgc1 IMX8ULP_CLK_XBAR_AD_DIVPLAT>,
<&pcc4 IMX8ULP_CLK_USDHC0>;
clock-names = "ipg", "ahb", "per";
+ power-domains = <&scmi_devpd IMX8ULP_PD_USDHC0>;
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
usdhc1: mmc@298e0000 {
- compatible = "fsl,imx8ulp-usdhc", "fsl,imx7ulp-usdhc";
+ compatible = "fsl,imx8ulp-usdhc", "fsl,imx8mm-usdhc";
reg = <0x298e0000 0x10000>;
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cgc1 IMX8ULP_CLK_DUMMY>,
- <&cgc1 IMX8ULP_CLK_DUMMY>,
+ clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>,
+ <&cgc1 IMX8ULP_CLK_NIC_PER_DIVPLAT>,
<&pcc4 IMX8ULP_CLK_USDHC1>;
clock-names = "ipg", "ahb", "per";
+ power-domains = <&scmi_devpd IMX8ULP_PD_USDHC1>;
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
@@ -470,117 +392,50 @@
<&cgc1 IMX8ULP_CLK_NIC_PER_DIVPLAT>,
<&pcc4 IMX8ULP_CLK_USDHC2>;
clock-names = "ipg", "ahb", "per";
- assigned-clocks = <&cgc1 IMX8ULP_CLK_SPLL3_PFD2>, <&pcc4 IMX8ULP_CLK_USDHC2>;
- assigned-clock-parents = <0>, <&cgc1 IMX8ULP_CLK_SPLL3_PFD2_DIV1>;
- assigned-clock-rates = <396000000>, <396000000>;
+ power-domains = <&scmi_devpd IMX8ULP_PD_USDHC2_USB1>;
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
- usbotg0: usb@29900000 {
- compatible = "fsl,imx8ulp-usb", "fsl,imx7ulp-usb",
- "fsl,imx27-usb";
- reg = <0x29900000 0x200>;
- interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&pcc4 IMX8ULP_CLK_USB0>;
- fsl,usbphy = <&usbphy0>;
- fsl,usbmisc = <&usbmisc0 0>;
- ahb-burst-config = <0x0>;
- tx-burst-size-dword = <0x8>;
- rx-burst-size-dword = <0x8>;
- status = "disabled";
- };
-
- usbmisc0: usbmisc@29900200 {
- #index-cells = <1>;
- compatible = "fsl,imx8ulp-usbmisc", "fsl,imx7ulp-usbmisc",
- "fsl,imx6q-usbmisc";
- reg = <0x29900200 0x200>;
- };
-
- usbphy0: usbphy@29910000 {
- compatible = "fsl,imx8ulp-usbphy",
- "fsl,imx7ulp-usbphy", "fsl,imx23-usbphy";
- reg = <0x29910000 0x1000>;
- interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&pcc4 IMX8ULP_CLK_USB0_PHY>;
- };
-
- usbotg1: usb@29920000 {
- compatible = "fsl,imx8ulp-usb", "fsl,imx7ulp-usb",
- "fsl,imx27-usb";
- reg = <0x29920000 0x200>;
- interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&pcc4 IMX8ULP_CLK_USB1>;
- fsl,usbphy = <&usbphy1>;
- fsl,usbmisc = <&usbmisc1 0>;
- ahb-burst-config = <0x0>;
- tx-burst-size-dword = <0x8>;
- rx-burst-size-dword = <0x8>;
- status = "disabled";
- };
-
- usbmisc1: usbmisc@29920200 {
- #index-cells = <1>;
- compatible = "fsl,imx8ulp-usbmisc", "fsl,imx7ulp-usbmisc",
- "fsl,imx6q-usbmisc";
- reg = <0x29920200 0x200>;
- };
-
- usbphy1: usbphy@29930000 {
- compatible = "fsl,imx8ulp-usbphy",
- "fsl,imx7ulp-usbphy", "fsl,imx23-usbphy";
- reg = <0x29930000 0x1000>;
- interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&pcc4 IMX8ULP_CLK_USB1_PHY>;
- };
-
fec: ethernet@29950000 {
- compatible = "fsl,imx8ulp-fec", "fsl,imx6sx-fec";
+ compatible = "fsl,imx8ulp-fec", "fsl,imx6ul-fec", "fsl,imx6q-fec";
reg = <0x29950000 0x10000>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&pcc4 IMX8ULP_CLK_ENET>,
- <&pcc4 IMX8ULP_CLK_ENET>,
- <&cgc1 IMX8ULP_CLK_ENETSTAMP_SEL>,
- <&pcc4 IMX8ULP_CLK_ENET>,
- <&pcc4 IMX8ULP_CLK_ENET>;
- clock-names = "ipg", "ahb", "ptp",
- "enet_clk_ref", "enet_out";
- fsl,num-tx-queues = <3>;
- fsl,num-rx-queues = <3>;
+ interrupt-names = "int0";
+ fsl,num-tx-queues = <1>;
+ fsl,num-rx-queues = <1>;
status = "disabled";
};
-
};
- gpioe: gpio@2d000000 {
- compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio";
- reg = <0x2d000080 0x1000 0x2d000040 0x40>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-controller;
- #interrupt-cells = <2>;
- clocks = <&pcc4 IMX8ULP_CLK_RGPIOE>,
- <&pcc4 IMX8ULP_CLK_PCTLE>;
- clock-names = "gpio", "port";
- gpio-ranges = <&iomuxc1 0 32 24>;
+ gpioe: gpio@2d000080 {
+ compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio";
+ reg = <0x2d000080 0x1000>, <0x2d000040 0x40>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pcc4 IMX8ULP_CLK_RGPIOE>,
+ <&pcc4 IMX8ULP_CLK_PCTLE>;
+ clock-names = "gpio", "port";
+ gpio-ranges = <&iomuxc1 0 32 24>;
};
- gpiof: gpio@2d010000 {
- compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio";
- reg = <0x2d010080 0x1000 0x2d010040 0x40>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-controller;
- #interrupt-cells = <2>;
- clocks = <&pcc4 IMX8ULP_CLK_RGPIOF>,
- <&pcc4 IMX8ULP_CLK_PCTLF>;
- clock-names = "gpio", "port";
- gpio-ranges = <&iomuxc1 0 64 24>;
+ gpiof: gpio@2d010080 {
+ compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio";
+ reg = <0x2d010080 0x1000>, <0x2d010040 0x40>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pcc4 IMX8ULP_CLK_RGPIOF>,
+ <&pcc4 IMX8ULP_CLK_PCTLF>;
+ clock-names = "gpio", "port";
+ gpio-ranges = <&iomuxc1 0 64 32>;
};
per_bridge5: bus@2d800000 {
@@ -590,117 +445,9 @@
#size-cells = <1>;
ranges;
- edma2: dma-controller@2d800000 {
- compatible = "fsl,imx8ulp-edma";
- reg = <0x2d800000 0x10000>,
- <0x2d810000 0x10000>, <0x2d820000 0x10000>,
- <0x2d830000 0x10000>, <0x2d840000 0x10000>,
- <0x2d850000 0x10000>, <0x2d860000 0x10000>,
- <0x2d870000 0x10000>, <0x2d880000 0x10000>,
- <0x2d890000 0x10000>, <0x2d8a0000 0x10000>,
- <0x2d8b0000 0x10000>, <0x2d8c0000 0x10000>,
- <0x2d8d0000 0x10000>, <0x2d8e0000 0x10000>,
- <0x2d8f0000 0x10000>, <0x2d900000 0x10000>,
- <0x2d910000 0x10000>, <0x2d920000 0x10000>,
- <0x2d930000 0x10000>, <0x2d940000 0x10000>,
- <0x2d950000 0x10000>, <0x2d960000 0x10000>,
- <0x2d970000 0x10000>, <0x2d980000 0x10000>,
- <0x2d990000 0x10000>, <0x2d9a0000 0x10000>,
- <0x2d9b0000 0x10000>, <0x2d9c0000 0x10000>,
- <0x2d9d0000 0x10000>, <0x2d9e0000 0x10000>,
- <0x2d9f0000 0x10000>, <0x2da00000 0x10000>;
- #dma-cells = <3>;
- dma-channels = <32>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "edma2-chan0-tx", "edma2-chan1-tx",
- "edma2-chan2-tx", "edma2-chan3-tx",
- "edma2-chan4-tx", "edma2-chan5-tx",
- "edma2-chan6-tx", "edma2-chan7-tx",
- "edma2-chan8-tx", "edma2-chan9-tx",
- "edma2-chan10-tx", "edma2-chan11-tx",
- "edma2-chan12-tx", "edma2-chan13-tx",
- "edma2-chan14-tx", "edma2-chan15-tx",
- "edma2-chan16-tx", "edma2-chan17-tx",
- "edma2-chan18-tx", "edma2-chan19-tx",
- "edma2-chan20-tx", "edma2-chan21-tx",
- "edma2-chan22-tx", "edma2-chan23-tx",
- "edma2-chan24-tx", "edma2-chan25-tx",
- "edma2-chan26-tx", "edma2-chan27-tx",
- "edma2-chan28-tx", "edma2-chan29-tx",
- "edma2-chan30-tx", "edma2-chan31-tx";
- clocks = <&pcc5 IMX8ULP_CLK_DMA2_MP>,
- <&pcc5 IMX8ULP_CLK_DMA2_CH0>, <&pcc5 IMX8ULP_CLK_DMA2_CH1>,
- <&pcc5 IMX8ULP_CLK_DMA2_CH2>, <&pcc5 IMX8ULP_CLK_DMA2_CH3>,
- <&pcc5 IMX8ULP_CLK_DMA2_CH4>, <&pcc5 IMX8ULP_CLK_DMA2_CH5>,
- <&pcc5 IMX8ULP_CLK_DMA2_CH6>, <&pcc5 IMX8ULP_CLK_DMA2_CH7>,
- <&pcc5 IMX8ULP_CLK_DMA2_CH8>, <&pcc5 IMX8ULP_CLK_DMA2_CH9>,
- <&pcc5 IMX8ULP_CLK_DMA2_CH10>, <&pcc5 IMX8ULP_CLK_DMA2_CH11>,
- <&pcc5 IMX8ULP_CLK_DMA2_CH12>, <&pcc5 IMX8ULP_CLK_DMA2_CH13>,
- <&pcc5 IMX8ULP_CLK_DMA2_CH14>, <&pcc5 IMX8ULP_CLK_DMA2_CH15>,
- <&pcc5 IMX8ULP_CLK_DMA2_CH16>, <&pcc5 IMX8ULP_CLK_DMA2_CH17>,
- <&pcc5 IMX8ULP_CLK_DMA2_CH18>, <&pcc5 IMX8ULP_CLK_DMA2_CH19>,
- <&pcc5 IMX8ULP_CLK_DMA2_CH20>, <&pcc5 IMX8ULP_CLK_DMA2_CH21>,
- <&pcc5 IMX8ULP_CLK_DMA2_CH22>, <&pcc5 IMX8ULP_CLK_DMA2_CH23>,
- <&pcc5 IMX8ULP_CLK_DMA2_CH24>, <&pcc5 IMX8ULP_CLK_DMA2_CH25>,
- <&pcc5 IMX8ULP_CLK_DMA2_CH26>, <&pcc5 IMX8ULP_CLK_DMA2_CH27>,
- <&pcc5 IMX8ULP_CLK_DMA2_CH28>, <&pcc5 IMX8ULP_CLK_DMA2_CH29>,
- <&pcc5 IMX8ULP_CLK_DMA2_CH30>, <&pcc5 IMX8ULP_CLK_DMA2_CH31>;
- clock-names = "edma-mp-clk",
- "edma2-chan0-clk", "edma2-chan1-clk",
- "edma2-chan2-clk", "edma2-chan3-clk",
- "edma2-chan4-clk", "edma2-chan5-clk",
- "edma2-chan6-clk", "edma2-chan7-clk",
- "edma2-chan8-clk", "edma2-chan9-clk",
- "edma2-chan10-clk", "edma2-chan11-clk",
- "edma2-chan12-clk", "edma2-chan13-clk",
- "edma2-chan14-clk", "edma2-chan15-clk",
- "edma2-chan16-clk", "edma2-chan17-clk",
- "edma2-chan18-clk", "edma2-chan19-clk",
- "edma2-chan20-clk", "edma2-chan21-clk",
- "edma2-chan22-clk", "edma2-chan23-clk",
- "edma2-chan24-clk", "edma2-chan25-clk",
- "edma2-chan26-clk", "edma2-chan27-clk",
- "edma2-chan28-clk", "edma2-chan29-clk",
- "edma2-chan30-clk", "edma2-chan31-clk";
- status = "okay";
- };
-
cgc2: clock-controller@2da60000 {
compatible = "fsl,imx8ulp-cgc2";
reg = <0x2da60000 0x10000>;
- clocks = <&sosc>, <&frosc>;
- clock-names = "sosc", "frosc";
#clock-cells = <1>;
};
@@ -708,12 +455,13 @@
compatible = "fsl,imx8ulp-pcc5";
reg = <0x2da70000 0x10000>;
#clock-cells = <1>;
+ #reset-cells = <1>;
};
};
- gpiod: gpio@2e200000 {
- compatible = "fsl,imx7ulp-gpio", "fsl,vf610-gpio";
- reg = <0x2e200080 0x1000 0x2e200040 0x40>;
+ gpiod: gpio@2e200080 {
+ compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio";
+ reg = <0x2e200080 0x1000>, <0x2e200040 0x40>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/include/dt-bindings/clock/imx8ulp-clock.h b/include/dt-bindings/clock/imx8ulp-clock.h
index 49166a1830..953ecfe8eb 100644
--- a/include/dt-bindings/clock/imx8ulp-clock.h
+++ b/include/dt-bindings/clock/imx8ulp-clock.h
@@ -1,16 +1,14 @@
-/* SPDX-License-Identifier: GPL-2.0 */
+/* SPDX-License-Identifier: GPL-2.0+ OR MIT */
/*
- * Copyright 2020 NXP
+ * Copyright 2021 NXP
*/
#ifndef __DT_BINDINGS_CLOCK_IMX8ULP_H
#define __DT_BINDINGS_CLOCK_IMX8ULP_H
#define IMX8ULP_CLK_DUMMY 0
-#define IMX8ULP_CLK_ROSC 1
-#define IMX8ULP_CLK_FROSC 2
-#define IMX8ULP_CLK_LPOSC 3
-#define IMX8ULP_CLK_SOSC 4
+
+/* CGC1 */
#define IMX8ULP_CLK_SPLL2 5
#define IMX8ULP_CLK_SPLL3 6
#define IMX8ULP_CLK_A35_SEL 7
@@ -57,14 +55,15 @@
#define IMX8ULP_CLK_FROSC_DIV1_GATE 48
#define IMX8ULP_CLK_FROSC_DIV2_GATE 49
#define IMX8ULP_CLK_FROSC_DIV3_GATE 50
-#define IMX8ULP_CLK_ENETSTAMP_SEL 51
-#define IMX8ULP_CLK_SAI4_SEL 52
-#define IMX8ULP_CLK_SAI5_SEL 53
-#define IMX8ULP_CLK_AUD_CLK1 54
-#define IMX8ULP_CLK_ARM 55
+#define IMX8ULP_CLK_SAI4_SEL 51
+#define IMX8ULP_CLK_SAI5_SEL 52
+#define IMX8ULP_CLK_AUD_CLK1 53
+#define IMX8ULP_CLK_ARM 54
+#define IMX8ULP_CLK_ENET_TS_SEL 55
#define IMX8ULP_CLK_CGC1_END 56
+/* CGC2 */
#define IMX8ULP_CLK_PLL4_PRE_SEL 0
#define IMX8ULP_CLK_PLL4 1
#define IMX8ULP_CLK_PLL4_VCODIV 2
@@ -110,8 +109,12 @@
#define IMX8ULP_CLK_SAI6_SEL 42
#define IMX8ULP_CLK_SAI7_SEL 43
#define IMX8ULP_CLK_SPDIF_SEL 44
+#define IMX8ULP_CLK_HIFI_SEL 45
+#define IMX8ULP_CLK_HIFI_DIVCORE 46
+#define IMX8ULP_CLK_HIFI_DIVPLAT 47
+#define IMX8ULP_CLK_DSI_PHY_REF 48
-#define IMX8ULP_CLK_CGC2_END 45
+#define IMX8ULP_CLK_CGC2_END 49
/* PCC3 */
#define IMX8ULP_CLK_WDOG3 0
@@ -160,9 +163,12 @@
#define IMX8ULP_CLK_DMA1_CH29 43
#define IMX8ULP_CLK_DMA1_CH30 44
#define IMX8ULP_CLK_DMA1_CH31 45
+#define IMX8ULP_CLK_MU3_A 46
+#define IMX8ULP_CLK_MU0_B 47
-#define IMX8ULP_CLK_PCC3_END 46
+#define IMX8ULP_CLK_PCC3_END 48
+/* PCC4 */
#define IMX8ULP_CLK_FLEXSPI2 0
#define IMX8ULP_CLK_TPM6 1
#define IMX8ULP_CLK_TPM7 2
@@ -189,24 +195,25 @@
#define IMX8ULP_CLK_PCC4_END 23
+/* PCC5 */
#define IMX8ULP_CLK_TPM8 0
#define IMX8ULP_CLK_SAI6 1
#define IMX8ULP_CLK_SAI7 2
#define IMX8ULP_CLK_SPDIF 3
-#define IMX8ULP_CLK_ISI 4
-#define IMX8ULP_CLK_CSI_REGS 5
+#define IMX8ULP_CLK_ISI 4
+#define IMX8ULP_CLK_CSI_REGS 5
#define IMX8ULP_CLK_PCTLD 6
-#define IMX8ULP_CLK_CSI 7
-#define IMX8ULP_CLK_DSI 8
+#define IMX8ULP_CLK_CSI 7
+#define IMX8ULP_CLK_DSI 8
#define IMX8ULP_CLK_WDOG5 9
#define IMX8ULP_CLK_EPDC 10
-#define IMX8ULP_CLK_PXP 11
+#define IMX8ULP_CLK_PXP 11
#define IMX8ULP_CLK_SFA2 12
#define IMX8ULP_CLK_GPU2D 13
#define IMX8ULP_CLK_GPU3D 14
#define IMX8ULP_CLK_DC_NANO 15
-#define IMX8ULP_CLK_CSI_CLK_UI 16
-#define IMX8ULP_CLK_CSI_CLK_ESC 17
+#define IMX8ULP_CLK_CSI_CLK_UI 16
+#define IMX8ULP_CLK_CSI_CLK_ESC 17
#define IMX8ULP_CLK_RGPIOD 18
#define IMX8ULP_CLK_DMA2_MP 19
#define IMX8ULP_CLK_DMA2_CH0 20
@@ -241,7 +248,11 @@
#define IMX8ULP_CLK_DMA2_CH29 49
#define IMX8ULP_CLK_DMA2_CH30 50
#define IMX8ULP_CLK_DMA2_CH31 51
+#define IMX8ULP_CLK_MU2_B 52
+#define IMX8ULP_CLK_MU3_B 53
+#define IMX8ULP_CLK_AVD_SIM 54
+#define IMX8ULP_CLK_DSI_TX_ESC 55
-#define IMX8ULP_CLK_PCC5_END 52
+#define IMX8ULP_CLK_PCC5_END 56
#endif
diff --git a/include/dt-bindings/power/imx8ulp-power.h b/include/dt-bindings/power/imx8ulp-power.h
new file mode 100644
index 0000000000..a556b2e96d
--- /dev/null
+++ b/include/dt-bindings/power/imx8ulp-power.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/*
+ * Copyright 2021 NXP
+ */
+
+#ifndef __DT_BINDINGS_IMX8ULP_POWER_H__
+#define __DT_BINDINGS_IMX8ULP_POWER_H__
+
+#define IMX8ULP_PD_DMA1 0
+#define IMX8ULP_PD_FLEXSPI2 1
+#define IMX8ULP_PD_USB0 2
+#define IMX8ULP_PD_USDHC0 3
+#define IMX8ULP_PD_USDHC1 4
+#define IMX8ULP_PD_USDHC2_USB1 5
+#define IMX8ULP_PD_DCNANO 6
+#define IMX8ULP_PD_EPDC 7
+#define IMX8ULP_PD_DMA2 8
+#define IMX8ULP_PD_GPU2D 9
+#define IMX8ULP_PD_GPU3D 10
+#define IMX8ULP_PD_HIFI4 11
+#define IMX8ULP_PD_ISI 12
+#define IMX8ULP_PD_MIPI_CSI 13
+#define IMX8ULP_PD_MIPI_DSI 14
+#define IMX8ULP_PD_PXP 15
+
+#endif
diff --git a/include/dt-bindings/reset/imx8ulp-pcc-reset.h b/include/dt-bindings/reset/imx8ulp-pcc-reset.h
new file mode 100644
index 0000000000..e99a4735c3
--- /dev/null
+++ b/include/dt-bindings/reset/imx8ulp-pcc-reset.h
@@ -0,0 +1,59 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2021 NXP
+ */
+
+#ifndef DT_BINDING_PCC_RESET_IMX8ULP_H
+#define DT_BINDING_PCC_RESET_IMX8ULP_H
+
+/* PCC3 */
+#define PCC3_WDOG3_SWRST 0
+#define PCC3_WDOG4_SWRST 1
+#define PCC3_LPIT1_SWRST 2
+#define PCC3_TPM4_SWRST 3
+#define PCC3_TPM5_SWRST 4
+#define PCC3_FLEXIO1_SWRST 5
+#define PCC3_I3C2_SWRST 6
+#define PCC3_LPI2C4_SWRST 7
+#define PCC3_LPI2C5_SWRST 8
+#define PCC3_LPUART4_SWRST 9
+#define PCC3_LPUART5_SWRST 10
+#define PCC3_LPSPI4_SWRST 11
+#define PCC3_LPSPI5_SWRST 12
+
+/* PCC4 */
+#define PCC4_FLEXSPI2_SWRST 0
+#define PCC4_TPM6_SWRST 1
+#define PCC4_TPM7_SWRST 2
+#define PCC4_LPI2C6_SWRST 3
+#define PCC4_LPI2C7_SWRST 4
+#define PCC4_LPUART6_SWRST 5
+#define PCC4_LPUART7_SWRST 6
+#define PCC4_SAI4_SWRST 7
+#define PCC4_SAI5_SWRST 8
+#define PCC4_USDHC0_SWRST 9
+#define PCC4_USDHC1_SWRST 10
+#define PCC4_USDHC2_SWRST 11
+#define PCC4_USB0_SWRST 12
+#define PCC4_USB0_PHY_SWRST 13
+#define PCC4_USB1_SWRST 14
+#define PCC4_USB1_PHY_SWRST 15
+#define PCC4_ENET_SWRST 16
+
+/* PCC5 */
+#define PCC5_TPM8_SWRST 0
+#define PCC5_SAI6_SWRST 1
+#define PCC5_SAI7_SWRST 2
+#define PCC5_SPDIF_SWRST 3
+#define PCC5_ISI_SWRST 4
+#define PCC5_CSI_REGS_SWRST 5
+#define PCC5_CSI_SWRST 6
+#define PCC5_DSI_SWRST 7
+#define PCC5_WDOG5_SWRST 8
+#define PCC5_EPDC_SWRST 9
+#define PCC5_PXP_SWRST 10
+#define PCC5_GPU2D_SWRST 11
+#define PCC5_GPU3D_SWRST 12
+#define PCC5_DC_NANO_SWRST 13
+
+#endif /*DT_BINDING_RESET_IMX8ULP_H */
--
2.35.1
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH v5 5/8] imx8mq: synchronise device tree with linux
2022-11-07 21:22 [PATCH v5 0/8] arm: dts: imx: sync device trees with upstream linux kernel part 1 Marcel Ziswiler
` (3 preceding siblings ...)
2022-11-07 21:22 ` [PATCH v5 4/8] imx8ulp: " Marcel Ziswiler
@ 2022-11-07 21:22 ` Marcel Ziswiler
2022-11-08 16:38 ` sbabic
2022-11-07 21:22 ` [PATCH v5 6/8] imx8mp: " Marcel Ziswiler
` (3 subsequent siblings)
8 siblings, 1 reply; 19+ messages in thread
From: Marcel Ziswiler @ 2022-11-07 21:22 UTC (permalink / raw)
To: u-boot
Cc: Giulio Benetti, Fabio Estevam, Jesse Taube, Marcel Ziswiler,
Angus Ainslie, NXP i.MX U-Boot Team, Stefano Babic, kernel
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Synchronise device tree with linux v6.1-rc3.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
(no changes since v4)
Changes in v4:
- Re-synched with v6.1-rc3.
arch/arm/dts/imx8mq-evk.dts | 43 +++++++
arch/arm/dts/imx8mq-librem5-r3.dtsi | 45 +++++++
arch/arm/dts/imx8mq-librem5-r4.dts | 20 +--
arch/arm/dts/imx8mq-librem5.dtsi | 153 +++++++++++++++++++++--
arch/arm/dts/imx8mq-u-boot.dtsi | 10 +-
arch/arm/dts/imx8mq.dtsi | 19 +--
include/dt-bindings/reset/imx8mq-reset.h | 61 ++++-----
7 files changed, 281 insertions(+), 70 deletions(-)
create mode 100644 arch/arm/dts/imx8mq-librem5-r3.dtsi
diff --git a/arch/arm/dts/imx8mq-evk.dts b/arch/arm/dts/imx8mq-evk.dts
index 99fed35168..82387b9cb8 100644
--- a/arch/arm/dts/imx8mq-evk.dts
+++ b/arch/arm/dts/imx8mq-evk.dts
@@ -71,12 +71,36 @@
linux,autosuspend-period = <125>;
};
+ audio_codec_bt_sco: audio-codec-bt-sco {
+ compatible = "linux,bt-sco";
+ #sound-dai-cells = <1>;
+ };
+
wm8524: audio-codec {
#sound-dai-cells = <0>;
compatible = "wlf,wm8524";
wlf,mute-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
};
+ sound-bt-sco {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "bt-sco-audio";
+ simple-audio-card,format = "dsp_a";
+ simple-audio-card,bitclock-inversion;
+ simple-audio-card,frame-master = <&btcpu>;
+ simple-audio-card,bitclock-master = <&btcpu>;
+
+ btcpu: simple-audio-card,cpu {
+ sound-dai = <&sai3>;
+ dai-tdm-slot-num = <2>;
+ dai-tdm-slot-width = <16>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&audio_codec_bt_sco 1>;
+ };
+ };
+
sound-wm8524 {
compatible = "simple-audio-card";
simple-audio-card,name = "wm8524-audio";
@@ -386,6 +410,16 @@
status = "okay";
};
+&sai3 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai3>;
+ assigned-clocks = <&clk IMX8MQ_CLK_SAI3>;
+ assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <24576000>;
+ status = "okay";
+};
+
&snvs_pwrkey {
status = "okay";
};
@@ -548,6 +582,15 @@
>;
};
+ pinctrl_sai3: sai3grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6
+ MX8MQ_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6
+ MX8MQ_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6
+ MX8MQ_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0xd6
+ >;
+ };
+
pinctrl_spdif1: spdif1grp {
fsl,pins = <
MX8MQ_IOMUXC_SPDIF_TX_SPDIF1_OUT 0xd6
diff --git a/arch/arm/dts/imx8mq-librem5-r3.dtsi b/arch/arm/dts/imx8mq-librem5-r3.dtsi
new file mode 100644
index 0000000000..e4f8b47cce
--- /dev/null
+++ b/arch/arm/dts/imx8mq-librem5-r3.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2021 Purism SPC <kernel@puri.sm>
+
+/dts-v1/;
+
+/*
+ * This file describes hardware that is shared among r3 ("Dogwood") and
+ * later revisions of the Librem 5 so it has to be included in dts there.
+ */
+
+#include "imx8mq-librem5.dtsi"
+
+/ {
+ model = "Purism Librem 5r3";
+ compatible = "purism,librem5r3", "purism,librem5", "fsl,imx8mq";
+};
+
+&accel_gyro {
+ mount-matrix = "1", "0", "0",
+ "0", "1", "0",
+ "0", "0", "-1";
+};
+
+&bq25895 {
+ ti,battery-regulation-voltage = <4200000>; /* uV */
+ ti,charge-current = <1500000>; /* uA */
+ ti,termination-current = <144000>; /* uA */
+};
+
+&camera_front {
+ pinctrl-0 = <&pinctrl_csi1>, <&pinctrl_r3_camera_pwr>;
+ shutdown-gpios = <&gpio5 4 GPIO_ACTIVE_LOW>;
+};
+
+&iomuxc {
+ pinctrl_r3_camera_pwr: r3camerapwrgrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SPDIF_RX_GPIO5_IO4 0x83
+ >;
+ };
+};
+
+&proximity {
+ proximity-near-level = <25>;
+};
diff --git a/arch/arm/dts/imx8mq-librem5-r4.dts b/arch/arm/dts/imx8mq-librem5-r4.dts
index cbfb49aa25..1056b7981b 100644
--- a/arch/arm/dts/imx8mq-librem5-r4.dts
+++ b/arch/arm/dts/imx8mq-librem5-r4.dts
@@ -1,35 +1,27 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-// Copyright (C) 2020 Purism SPC <kernel@puri.sm>
+// Copyright (C) 2021 Purism SPC <kernel@puri.sm>
/dts-v1/;
-#include "imx8mq-librem5.dtsi"
+#include "imx8mq-librem5-r3.dtsi"
/ {
model = "Purism Librem 5r4";
compatible = "purism,librem5r4", "purism,librem5", "fsl,imx8mq";
};
-&accel_gyro {
- mount-matrix = "1", "0", "0",
- "0", "1", "0",
- "0", "0", "-1";
-};
-
&bat {
maxim,rsns-microohm = <1667>;
};
-&bq25895 {
- ti,battery-regulation-voltage = <4200000>; /* uV */
- ti,charge-current = <1500000>; /* uA */
- ti,termination-current = <144000>; /* uA */
-};
-
&led_backlight {
led-max-microamp = <25000>;
};
+&lcd_panel {
+ compatible = "ys,ys57pss36bh5gq";
+};
+
&proximity {
proximity-near-level = <10>;
};
diff --git a/arch/arm/dts/imx8mq-librem5.dtsi b/arch/arm/dts/imx8mq-librem5.dtsi
index 60d47c7149..ae08556b2e 100644
--- a/arch/arm/dts/imx8mq-librem5.dtsi
+++ b/arch/arm/dts/imx8mq-librem5.dtsi
@@ -7,6 +7,7 @@
#include "dt-bindings/input/input.h"
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
#include "dt-bindings/pwm/pwm.h"
#include "dt-bindings/usb/pd.h"
#include "imx8mq.dtsi"
@@ -14,6 +15,7 @@
/ {
model = "Purism Librem 5";
compatible = "purism,librem5", "fsl,imx8mq";
+ chassis-type = "handset";
backlight_dsi: backlight-dsi {
compatible = "led-backlight";
@@ -36,18 +38,45 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_keys>;
- vol-down {
+ key-vol-down {
label = "VOL_DOWN";
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
debounce-interval = <50>;
+ wakeup-source;
};
- vol-up {
+ key-vol-up {
label = "VOL_UP";
gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
debounce-interval = <50>;
+ wakeup-source;
+ };
+ };
+
+ led-controller {
+ compatible = "pwm-leds";
+
+ led-0 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_BLUE>;
+ max-brightness = <248>;
+ pwms = <&pwm2 0 50000 0>;
+ };
+
+ led-1 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_GREEN>;
+ max-brightness = <248>;
+ pwms = <&pwm4 0 50000 0>;
+ };
+
+ led-2 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
+ max-brightness = <248>;
+ pwms = <&pwm3 0 50000 0>;
};
};
@@ -62,6 +91,40 @@
enable-active-high;
};
+ /*
+ * the pinctrl for reg_csi_1v8 and reg_vcam_1v8 is added to the PMIC
+ * since we can't have it twice in the 2 different regulator nodes.
+ */
+ reg_csi_1v8: regulator-csi-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "CAMERA_VDDIO_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <®_vdd_3v3>;
+ gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ /* controlled by the CAMERA_POWER_KEY HKS */
+ reg_vcam_1v2: regulator-vcam-1v2 {
+ compatible = "regulator-fixed";
+ regulator-name = "CAMERA_VDDD_1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ vin-supply = <®_vdd_1v8>;
+ enable-active-high;
+ };
+
+ reg_vcam_2v8: regulator-vcam-2v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "CAMERA_VDDA_2V8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ vin-supply = <®_vdd_3v3>;
+ gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
reg_gnss: regulator-gnss {
compatible = "regulator-fixed";
pinctrl-names = "default";
@@ -237,8 +300,13 @@
cpu-supply = <&buck2_reg>;
};
+&csi1 {
+ status = "okay";
+};
+
&ddrc {
operating-points-v2 = <&ddrc_opp_table>;
+ status = "okay";
ddrc_opp_table: opp-table {
compatible = "operating-points-v2";
@@ -283,15 +351,10 @@
};
partition@30000 {
- label = "protected1";
- reg = <0x30000 0x10000>;
+ label = "firmware";
+ reg = <0x30000 0x1d0000>;
read-only;
};
-
- partition@40000 {
- label = "rw";
- reg = <0x40000 0x1C0000>;
- };
};
};
@@ -329,12 +392,24 @@
>;
};
+ pinctrl_camera_pwr: camerapwrgrp {
+ fsl,pins = <
+ /* CAMERA_PWR_EN_3V3 */
+ MX8MQ_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x83
+ >;
+ };
+
+ pinctrl_csi1: csi1grp {
+ fsl,pins = <
+ /* CSI1_NRST */
+ MX8MQ_IOMUXC_ENET_RXC_GPIO1_IO25 0x83
+ >;
+ };
+
pinctrl_charger_in: chargeringrp {
fsl,pins = <
/* CHRG_INT */
MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x80
- /* CHG_STATUS_B */
- MX8MQ_IOMUXC_NAND_ALE_GPIO3_IO0 0x80
>;
};
@@ -698,6 +773,10 @@
interrupt-names = "irq";
connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ data-role = "dual";
+
ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -725,7 +804,7 @@
compatible = "rohm,bd71837";
reg = <0x4b>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pmic>;
+ pinctrl-0 = <&pinctrl_pmic>, <&pinctrl_camera_pwr>;
clocks = <&pmic_osc>;
clock-names = "osc";
clock-output-names = "pmic_clk";
@@ -958,6 +1037,31 @@
>;
};
+ camera_front: camera@20 {
+ compatible = "hynix,hi846";
+ reg = <0x20>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_csi1>;
+ clocks = <&clk IMX8MQ_CLK_CLKO2>;
+ assigned-clocks = <&clk IMX8MQ_CLK_CLKO2>;
+ assigned-clock-rates = <25000000>;
+ reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+ vdda-supply = <®_vcam_2v8>;
+ vddd-supply = <®_vcam_1v2>;
+ vddio-supply = <®_csi_1v8>;
+ rotation = <90>;
+ orientation = <0>;
+
+ port {
+ camera1_ep: endpoint {
+ data-lanes = <1 2>;
+ link-frequencies = /bits/ 64
+ <80000000 200000000 300000000>;
+ remote-endpoint = <&mipi1_sensor_ep>;
+ };
+ };
+ };
+
backlight@36 {
compatible = "ti,lm36922";
reg = <0x36>;
@@ -996,6 +1100,12 @@
pinctrl-0 = <&pinctrl_i2c4>;
status = "okay";
+ vcm@c {
+ compatible = "dongwoon,dw9714";
+ reg = <0x0c>;
+ vcc-supply = <®_csi_1v8>;
+ };
+
bat: fuel-gauge@36 {
compatible = "maxim,max17055";
reg = <0x36>;
@@ -1003,6 +1113,7 @@
interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gauge>;
+ power-supplies = <&bq25895>;
maxim,over-heat-temp = <700>;
maxim,over-volt = <4500>;
maxim,rsns-microohm = <5000>;
@@ -1019,7 +1130,7 @@
ti,precharge-current = <130000>; /* uA */
ti,minimum-sys-voltage = <3700000>; /* uV */
ti,boost-voltage = <5000000>; /* uV */
- ti,boost-max-current = <500000>; /* uA */
+ ti,boost-max-current = <1500000>; /* uA */
ti,use-vinmin-threshold = <1>; /* enable VINDPM */
ti,vinmin-threshold = <3900000>; /* uV */
monitored-battery = <&bat>;
@@ -1031,6 +1142,21 @@
status = "okay";
};
+&mipi_csi1 {
+ status = "okay";
+
+ ports {
+ port@0 {
+ reg = <0>;
+
+ mipi1_sensor_ep: endpoint {
+ remote-endpoint = <&camera1_ep>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+};
+
&mipi_dsi {
#address-cells = <1>;
#size-cells = <0>;
@@ -1174,6 +1300,7 @@
#size-cells = <0>;
dr_mode = "otg";
snps,dis_u3_susphy_quirk;
+ usb-role-switch;
status = "okay";
port@0 {
diff --git a/arch/arm/dts/imx8mq-u-boot.dtsi b/arch/arm/dts/imx8mq-u-boot.dtsi
index c69c6cc58b..8d385e8da4 100644
--- a/arch/arm/dts/imx8mq-u-boot.dtsi
+++ b/arch/arm/dts/imx8mq-u-boot.dtsi
@@ -10,23 +10,23 @@
};
-&{/soc@0} {
+&soc {
u-boot,dm-spl;
};
-&{/soc@0/bus@30000000} {
+&aips1 {
u-boot,dm-spl;
};
-&{/soc@0/bus@30400000} {
+&aips2 {
u-boot,dm-spl;
};
-&{/soc@0/bus@30800000} {
+&aips3 {
u-boot,dm-spl;
};
-&{/soc@0/bus@32c00000} {
+&aips4 {
u-boot,dm-spl;
};
diff --git a/arch/arm/dts/imx8mq.dtsi b/arch/arm/dts/imx8mq.dtsi
index 49eadb081b..19eaa52356 100644
--- a/arch/arm/dts/imx8mq.dtsi
+++ b/arch/arm/dts/imx8mq.dtsi
@@ -94,7 +94,7 @@
clk_ext4: clock-ext4 {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency= <133000000>;
+ clock-frequency = <133000000>;
clock-output-names = "clk_ext4";
};
@@ -320,7 +320,7 @@
arm,no-tick-in-suspend;
};
- soc@0 {
+ soc: soc@0 {
compatible = "fsl,imx8mq-soc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
@@ -329,7 +329,7 @@
nvmem-cells = <&imx8mq_uid>;
nvmem-cell-names = "soc_unique_id";
- bus@30000000 { /* AIPS1 */
+ aips1: bus@30000000 { /* AIPS1 */
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x30000000 0x400000>;
#address-cells = <1>;
@@ -507,7 +507,7 @@
<0x00030005 0x00000053>,
<0x00030006 0x0000005f>,
<0x00030007 0x00000071>;
- #thermal-sensor-cells = <1>;
+ #thermal-sensor-cells = <1>;
};
wdog1: watchdog@30280000 {
@@ -534,7 +534,7 @@
status = "disabled";
};
- sdma2: sdma@302c0000 {
+ sdma2: dma-controller@302c0000 {
compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma";
reg = <0x302c0000 0x10000>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
@@ -784,7 +784,7 @@
};
};
- bus@30400000 { /* AIPS2 */
+ aips2: bus@30400000 { /* AIPS2 */
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x30400000 0x400000>;
#address-cells = <1>;
@@ -844,7 +844,7 @@
};
};
- bus@30800000 { /* AIPS3 */
+ aips3: bus@30800000 { /* AIPS3 */
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x30800000 0x400000>;
#address-cells = <1>;
@@ -1018,6 +1018,7 @@
compatible = "fsl,sec-v4.0-job-ring";
reg = <0x1000 0x1000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
};
sec_jr1: jr@2000 {
@@ -1301,7 +1302,7 @@
status = "disabled";
};
- sdma1: sdma@30bd0000 {
+ sdma1: dma-controller@30bd0000 {
compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma";
reg = <0x30bd0000 0x10000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
@@ -1369,7 +1370,7 @@
};
};
- bus@32c00000 { /* AIPS4 */
+ aips4: bus@32c00000 { /* AIPS4 */
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x32c00000 0x400000>;
#address-cells = <1>;
diff --git a/include/dt-bindings/reset/imx8mq-reset.h b/include/dt-bindings/reset/imx8mq-reset.h
index 9a301082d3..705870693e 100755
--- a/include/dt-bindings/reset/imx8mq-reset.h
+++ b/include/dt-bindings/reset/imx8mq-reset.h
@@ -28,37 +28,40 @@
#define IMX8MQ_RESET_A53_L2RESET 17
#define IMX8MQ_RESET_SW_NON_SCLR_M4C_RST 18
#define IMX8MQ_RESET_OTG1_PHY_RESET 19
-#define IMX8MQ_RESET_OTG2_PHY_RESET 20
-#define IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N 21
-#define IMX8MQ_RESET_MIPI_DSI_RESET_N 22
-#define IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N 23
-#define IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N 24
-#define IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N 25
-#define IMX8MQ_RESET_PCIEPHY 26
-#define IMX8MQ_RESET_PCIEPHY_PERST 27
-#define IMX8MQ_RESET_PCIE_CTRL_APPS_EN 28
-#define IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF 29
-#define IMX8MQ_RESET_HDMI_PHY_APB_RESET 30 /* i.MX8MM does NOT support */
+#define IMX8MQ_RESET_OTG2_PHY_RESET 20 /* i.MX8MN does NOT support */
+#define IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N 21 /* i.MX8MN does NOT support */
+#define IMX8MQ_RESET_MIPI_DSI_RESET_N 22 /* i.MX8MN does NOT support */
+#define IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N 23 /* i.MX8MN does NOT support */
+#define IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N 24 /* i.MX8MN does NOT support */
+#define IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N 25 /* i.MX8MN does NOT support */
+#define IMX8MQ_RESET_PCIEPHY 26 /* i.MX8MN does NOT support */
+#define IMX8MQ_RESET_PCIEPHY_PERST 27 /* i.MX8MN does NOT support */
+#define IMX8MQ_RESET_PCIE_CTRL_APPS_EN 28 /* i.MX8MN does NOT support */
+#define IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF 29 /* i.MX8MN does NOT support */
+#define IMX8MQ_RESET_HDMI_PHY_APB_RESET 30 /* i.MX8MM/i.MX8MN does NOT support */
#define IMX8MQ_RESET_DISP_RESET 31
#define IMX8MQ_RESET_GPU_RESET 32
-#define IMX8MQ_RESET_VPU_RESET 33
-#define IMX8MQ_RESET_PCIEPHY2 34 /* i.MX8MM does NOT support */
-#define IMX8MQ_RESET_PCIEPHY2_PERST 35 /* i.MX8MM does NOT support */
-#define IMX8MQ_RESET_PCIE2_CTRL_APPS_EN 36 /* i.MX8MM does NOT support */
-#define IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF 37 /* i.MX8MM does NOT support */
-#define IMX8MQ_RESET_MIPI_CSI1_CORE_RESET 38 /* i.MX8MM does NOT support */
-#define IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET 39 /* i.MX8MM does NOT support */
-#define IMX8MQ_RESET_MIPI_CSI1_ESC_RESET 40 /* i.MX8MM does NOT support */
-#define IMX8MQ_RESET_MIPI_CSI2_CORE_RESET 41 /* i.MX8MM does NOT support */
-#define IMX8MQ_RESET_MIPI_CSI2_PHY_REF_RESET 42 /* i.MX8MM does NOT support */
-#define IMX8MQ_RESET_MIPI_CSI2_ESC_RESET 43 /* i.MX8MM does NOT support */
-#define IMX8MQ_RESET_DDRC1_PRST 44
-#define IMX8MQ_RESET_DDRC1_CORE_RESET 45
-#define IMX8MQ_RESET_DDRC1_PHY_RESET 46
-#define IMX8MQ_RESET_DDRC2_PRST 47 /* i.MX8MM does NOT support */
-#define IMX8MQ_RESET_DDRC2_CORE_RESET 48 /* i.MX8MM does NOT support */
-#define IMX8MQ_RESET_DDRC2_PHY_RESET 49 /* i.MX8MM does NOT support */
+#define IMX8MQ_RESET_VPU_RESET 33 /* i.MX8MN does NOT support */
+#define IMX8MQ_RESET_PCIEPHY2 34 /* i.MX8MM/i.MX8MN does NOT support */
+#define IMX8MQ_RESET_PCIEPHY2_PERST 35 /* i.MX8MM/i.MX8MN does NOT support */
+#define IMX8MQ_RESET_PCIE2_CTRL_APPS_EN 36 /* i.MX8MM/i.MX8MN does NOT support */
+#define IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF 37 /* i.MX8MM/i.MX8MN does NOT support */
+#define IMX8MQ_RESET_MIPI_CSI1_CORE_RESET 38 /* i.MX8MM/i.MX8MN does NOT support */
+#define IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET 39 /* i.MX8MM/i.MX8MN does NOT support */
+#define IMX8MQ_RESET_MIPI_CSI1_ESC_RESET 40 /* i.MX8MM/i.MX8MN does NOT support */
+#define IMX8MQ_RESET_MIPI_CSI2_CORE_RESET 41 /* i.MX8MM/i.MX8MN does NOT support */
+#define IMX8MQ_RESET_MIPI_CSI2_PHY_REF_RESET 42 /* i.MX8MM/i.MX8MN does NOT support */
+#define IMX8MQ_RESET_MIPI_CSI2_ESC_RESET 43 /* i.MX8MM/i.MX8MN does NOT support */
+#define IMX8MQ_RESET_DDRC1_PRST 44 /* i.MX8MN does NOT support */
+#define IMX8MQ_RESET_DDRC1_CORE_RESET 45 /* i.MX8MN does NOT support */
+#define IMX8MQ_RESET_DDRC1_PHY_RESET 46 /* i.MX8MN does NOT support */
+#define IMX8MQ_RESET_DDRC2_PRST 47 /* i.MX8MM/i.MX8MN does NOT support */
+#define IMX8MQ_RESET_DDRC2_CORE_RESET 48 /* i.MX8MM/i.MX8MN does NOT support */
+#define IMX8MQ_RESET_DDRC2_PHY_RESET 49 /* i.MX8MM/i.MX8MN does NOT support */
+#define IMX8MQ_RESET_SW_M4C_RST 50
+#define IMX8MQ_RESET_SW_M4P_RST 51
+#define IMX8MQ_RESET_M4_ENABLE 52
-#define IMX8MQ_RESET_NUM 50
+#define IMX8MQ_RESET_NUM 53
#endif
--
2.35.1
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH v5 6/8] imx8mp: synchronise device tree with linux
2022-11-07 21:22 [PATCH v5 0/8] arm: dts: imx: sync device trees with upstream linux kernel part 1 Marcel Ziswiler
` (4 preceding siblings ...)
2022-11-07 21:22 ` [PATCH v5 5/8] imx8mq: " Marcel Ziswiler
@ 2022-11-07 21:22 ` Marcel Ziswiler
2022-11-08 16:38 ` sbabic
2022-11-07 21:22 ` [PATCH v5 7/8] imx8mn: " Marcel Ziswiler
` (2 subsequent siblings)
8 siblings, 1 reply; 19+ messages in thread
From: Marcel Ziswiler @ 2022-11-07 21:22 UTC (permalink / raw)
To: u-boot
Cc: Giulio Benetti, Fabio Estevam, Jesse Taube, Marcel Ziswiler,
Tim Harvey, Marek Vasut, NXP i.MX U-Boot Team, Stefano Babic,
Teresa Remmet
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Synchronise device tree with linux v6.1-rc3.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-By: Tim Harvey <tharvey@gateworks.com> #imx8m{m,n,p}-venice-*
---
Changes in v5:
- Add Tim's tested-by. Thanks!
Changes in v4:
- Re-synched with v6.1-rc3.
arch/arm/dts/imx8mp-dhcom-pdk2.dts | 29 +-
arch/arm/dts/imx8mp-dhcom-som.dtsi | 20 +-
arch/arm/dts/imx8mp-evk.dts | 179 +++++++----
arch/arm/dts/imx8mp-icore-mx8mp-edimm2.2.dts | 2 +-
arch/arm/dts/imx8mp-icore-mx8mp.dtsi | 2 +-
arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts | 48 +--
arch/arm/dts/imx8mp-u-boot.dtsi | 2 +-
arch/arm/dts/imx8mp-venice-gw74xx.dts | 284 +++++++++++++-----
arch/arm/dts/imx8mp-verdin.dtsi | 32 +-
arch/arm/dts/imx8mp.dtsi | 147 ++++++++-
include/dt-bindings/clock/imx8mp-clock.h | 13 +-
include/dt-bindings/interconnect/fsl,imx8mp.h | 59 ++++
include/dt-bindings/power/imx8mp-power.h | 21 +-
include/dt-bindings/reset/imx8mp-reset.h | 50 +++
14 files changed, 683 insertions(+), 205 deletions(-)
create mode 100644 include/dt-bindings/interconnect/fsl,imx8mp.h
create mode 100644 include/dt-bindings/reset/imx8mp-reset.h
diff --git a/arch/arm/dts/imx8mp-dhcom-pdk2.dts b/arch/arm/dts/imx8mp-dhcom-pdk2.dts
index c9a481ac9a..382fbedaf6 100644
--- a/arch/arm/dts/imx8mp-dhcom-pdk2.dts
+++ b/arch/arm/dts/imx8mp-dhcom-pdk2.dts
@@ -17,14 +17,13 @@
/ {
model = "DH electronics i.MX8M Plus DHCOM Premium Developer Kit (2)";
compatible = "dh,imx8mp-dhcom-pdk2", "dh,imx8mp-dhcom-som",
- "fsl,imx8mp";
+ "fsl,imx8mp";
chosen {
stdout-path = &uart1;
};
gpio-keys {
- #size-cells = <0>;
compatible = "gpio-keys";
button-0 {
@@ -67,7 +66,7 @@
led {
compatible = "gpio-leds";
- led-5 {
+ led-0 {
color = <LED_COLOR_ID_GREEN>;
default-state = "off";
function = LED_FUNCTION_INDICATOR;
@@ -76,7 +75,7 @@
pinctrl-names = "default";
};
- led-6 {
+ led-1 {
color = <LED_COLOR_ID_GREEN>;
default-state = "off";
function = LED_FUNCTION_INDICATOR;
@@ -85,7 +84,7 @@
pinctrl-names = "default";
};
- led-7 {
+ led-2 {
color = <LED_COLOR_ID_GREEN>;
default-state = "off";
function = LED_FUNCTION_INDICATOR;
@@ -94,7 +93,7 @@
pinctrl-names = "default";
};
- led-8 {
+ led-3 {
color = <LED_COLOR_ID_GREEN>;
default-state = "off";
function = LED_FUNCTION_INDICATOR;
@@ -123,10 +122,11 @@
mdio {
ethphypdk: ethernet-phy@7 { /* KSZ 9021 */
compatible = "ethernet-phy-ieee802.3-c22";
- interrupt-parent = <&gpio4>;
- interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
pinctrl-0 = <&pinctrl_ethphy1>;
pinctrl-names = "default";
+ interrupt-parent = <&gpio4>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ max-speed = <100>;
reg = <7>;
reset-assert-us = <1000>;
reset-deassert-us = <1000>;
@@ -143,7 +143,6 @@
txd2-skew-ps = <0>;
txd3-skew-ps = <0>;
txen-skew-ps = <0>;
- max-speed = <100>;
};
};
};
@@ -155,3 +154,15 @@
&usb3_1 {
fsl,over-current-active-low;
};
+
+&iomuxc {
+ /*
+ * GPIO_A,B,C,D are connected to buttons.
+ * GPIO_E,F,H,I are connected to LEDs.
+ * GPIO_M is connected to CLKOUT2.
+ */
+ pinctrl-0 = <&pinctrl_hog_base
+ &pinctrl_dhcom_g &pinctrl_dhcom_j
+ &pinctrl_dhcom_k &pinctrl_dhcom_l
+ &pinctrl_dhcom_int>;
+};
diff --git a/arch/arm/dts/imx8mp-dhcom-som.dtsi b/arch/arm/dts/imx8mp-dhcom-som.dtsi
index 197840d1a6..0f13ee3627 100644
--- a/arch/arm/dts/imx8mp-dhcom-som.dtsi
+++ b/arch/arm/dts/imx8mp-dhcom-som.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2021-2022 Marek Vasut <marex@denx.de>
*/
@@ -224,10 +224,6 @@
};
&i2c3 {
- /*
- * iMX8MP 1P33A Errata ERR007805
- * I2C is limited to 384 kHz due to SoC bug.
- */
clock-frequency = <100000>;
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c3>;
@@ -393,10 +389,6 @@
};
&i2c4 {
- /*
- * iMX8MP 1P33A Errata ERR007805
- * I2C is limited to 384 kHz due to SoC bug.
- */
clock-frequency = <100000>;
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c4>;
@@ -407,10 +399,6 @@
};
&i2c5 { /* HDMI EDID bus */
- /*
- * iMX8MP 1P33A Errata ERR007805
- * I2C is limited to 384 kHz due to SoC bug.
- */
clock-frequency = <100000>;
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c5>;
@@ -802,8 +790,8 @@
pinctrl_i2c5: dhcom-i2c5-grp {
fsl,pins = <
- MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x40000084
- MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x40000084
+ MX8MP_IOMUXC_HDMI_DDC_SCL__I2C5_SCL 0x40000084
+ MX8MP_IOMUXC_HDMI_DDC_SDA__I2C5_SDA 0x40000084
>;
};
@@ -830,7 +818,7 @@
pinctrl_rtc: dhcom-rtc-grp {
fsl,pins = <
/* RTC_#INT Interrupt */
- MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x400001c6
+ MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x40000080
>;
};
diff --git a/arch/arm/dts/imx8mp-evk.dts b/arch/arm/dts/imx8mp-evk.dts
index 4c3ac4214a..9f1469db55 100644
--- a/arch/arm/dts/imx8mp-evk.dts
+++ b/arch/arm/dts/imx8mp-evk.dts
@@ -5,6 +5,7 @@
/dts-v1/;
+#include <dt-bindings/phy/phy-imx8-pcie.h>
#include "imx8mp.dtsi"
/ {
@@ -33,6 +34,12 @@
<0x1 0x00000000 0 0xc0000000>;
};
+ pcie0_refclk: pcie0-refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
+
reg_can1_stby: regulator-can1-stby {
compatible = "regulator-fixed";
regulator-name = "can1-stby";
@@ -55,6 +62,17 @@
enable-active-high;
};
+ reg_pcie0: regulator-pcie {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie0_reg>;
+ regulator-name = "MPCIE_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
reg_usdhc2_vmmc: regulator-usdhc2 {
compatible = "regulator-fixed";
pinctrl-names = "default";
@@ -67,18 +85,20 @@
};
};
-&flexcan1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_flexcan1>;
- xceiver-supply = <®_can1_stby>;
- status = "okay";
+&A53_0 {
+ cpu-supply = <®_arm>;
};
-&flexcan2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_flexcan2>;
- xceiver-supply = <®_can2_stby>;
- status = "disabled";/* can2 pin conflict with pdm */
+&A53_1 {
+ cpu-supply = <®_arm>;
+};
+
+&A53_2 {
+ cpu-supply = <®_arm>;
+};
+
+&A53_3 {
+ cpu-supply = <®_arm>;
};
&eqos {
@@ -197,6 +217,20 @@
};
};
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <®_can1_stby>;
+ status = "okay";
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <®_can2_stby>;
+ status = "disabled";/* can2 pin conflict with pdm */
+};
+
&i2c1 {
clock-frequency = <400000>;
pinctrl-names = "default";
@@ -221,7 +255,7 @@
regulator-ramp-delay = <3125>;
};
- BUCK2 {
+ reg_arm: BUCK2 {
regulator-name = "BUCK2";
regulator-min-microvolt = <720000>;
regulator-max-microvolt = <1025000>;
@@ -334,6 +368,28 @@
*/
};
+&pcie_phy {
+ fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+ clocks = <&pcie0_refclk>;
+ clock-names = "ref";
+ status = "okay";
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie0>;
+ reset-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>;
+ clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
+ <&clk IMX8MP_CLK_PCIE_ROOT>,
+ <&clk IMX8MP_CLK_HSIO_AXI>;
+ clock-names = "pcie", "pcie_aux", "pcie_bus";
+ assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>;
+ assigned-clock-rates = <10000000>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>;
+ vpcie-supply = <®_pcie0>;
+ status = "okay";
+};
+
&snvs_pwrkey {
status = "okay";
};
@@ -395,41 +451,41 @@
&iomuxc {
pinctrl_eqos: eqosgrp {
fsl,pins = <
- MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3
- MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3
- MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91
- MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91
- MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91
- MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91
- MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91
- MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91
- MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f
- MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f
- MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f
- MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f
- MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f
- MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f
- MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x19
+ MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x2
+ MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x2
+ MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x90
+ MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x90
+ MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x90
+ MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90
+ MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90
+ MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90
+ MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x16
+ MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x16
+ MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x16
+ MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x16
+ MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x16
+ MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x16
+ MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x10
>;
};
pinctrl_fec: fecgrp {
fsl,pins = <
- MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3
- MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3
- MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91
- MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91
- MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91
- MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91
- MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91
- MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91
- MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f
- MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f
- MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f
- MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f
- MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f
- MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f
- MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x19
+ MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x2
+ MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x2
+ MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x90
+ MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x90
+ MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x90
+ MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x90
+ MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x90
+ MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x90
+ MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x16
+ MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x16
+ MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x16
+ MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x16
+ MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x16
+ MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x16
+ MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x10
>;
};
@@ -461,28 +517,41 @@
pinctrl_gpio_led: gpioledgrp {
fsl,pins = <
- MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x19
+ MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x140
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
- MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c3
- MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c3
+ MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2
+ MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c2
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
- MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c3
- MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c3
+ MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c2
+ MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c2
>;
};
pinctrl_i2c5: i2c5grp {
fsl,pins = <
- MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA 0x400001c3
- MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL 0x400001c3
+ MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA 0x400001c2
+ MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL 0x400001c2
+ >;
+ };
+
+ pinctrl_pcie0: pcie0grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C4_SCL__PCIE_CLKREQ_B 0x61 /* open drain, pull up */
+ MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07 0x41
+ >;
+ };
+
+ pinctrl_pcie0_reg: pcie0reggrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06 0x41
>;
};
@@ -500,20 +569,20 @@
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
fsl,pins = <
- MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41
+ MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x40
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
- MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x49
- MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x49
+ MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x140
+ MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x140
>;
};
pinctrl_usb1_vbus: usb1grp {
fsl,pins = <
- MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR 0x19
+ MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR 0x10
>;
};
@@ -525,7 +594,7 @@
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
- MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
>;
};
@@ -537,7 +606,7 @@
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4
- MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
>;
};
@@ -549,7 +618,7 @@
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6
- MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
>;
};
diff --git a/arch/arm/dts/imx8mp-icore-mx8mp-edimm2.2.dts b/arch/arm/dts/imx8mp-icore-mx8mp-edimm2.2.dts
index dd703b6a5e..a02b31c42d 100644
--- a/arch/arm/dts/imx8mp-icore-mx8mp-edimm2.2.dts
+++ b/arch/arm/dts/imx8mp-icore-mx8mp-edimm2.2.dts
@@ -2,7 +2,7 @@
/*
* Copyright (c) 2018 NXP
* Copyright (c) 2019 Engicam srl
- * Copyright (c) 2020 Amarula Solutons(India)
+ * Copyright (c) 2020 Amarula Solutions(India)
*/
/dts-v1/;
diff --git a/arch/arm/dts/imx8mp-icore-mx8mp.dtsi b/arch/arm/dts/imx8mp-icore-mx8mp.dtsi
index 5116079cce..a6319824ea 100644
--- a/arch/arm/dts/imx8mp-icore-mx8mp.dtsi
+++ b/arch/arm/dts/imx8mp-icore-mx8mp.dtsi
@@ -2,7 +2,7 @@
/*
* Copyright (c) 2018 NXP
* Copyright (c) 2019 Engicam srl
- * Copyright (c) 2020 Amarula Solutons(India)
+ * Copyright (c) 2020 Amarula Solutions(India)
*/
/ {
diff --git a/arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts b/arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts
index 984a6b9ded..6aa720bafe 100644
--- a/arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts
+++ b/arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts
@@ -116,48 +116,48 @@
&iomuxc {
pinctrl_eqos: eqosgrp {
fsl,pins = <
- MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3
- MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3
- MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91
- MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91
- MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91
- MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91
- MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91
- MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91
- MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f
- MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f
- MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f
- MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f
- MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f
- MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f
+ MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x2
+ MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x2
+ MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x90
+ MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x90
+ MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x90
+ MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90
+ MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90
+ MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90
+ MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x16
+ MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x16
+ MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x16
+ MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x16
+ MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x16
+ MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x16
MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x10
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
- MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c3
- MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c3
+ MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2
+ MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c2
>;
};
pinctrl_i2c2_gpio: i2c2gpiogrp {
fsl,pins = <
- MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x1e3
- MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x1e3
+ MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x1e2
+ MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x1e2
>;
};
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
fsl,pins = <
- MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41
+ MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x40
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
- MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x49
- MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x49
+ MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x40
+ MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x40
>;
};
@@ -175,7 +175,7 @@
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
- MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
>;
};
@@ -187,7 +187,7 @@
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4
- MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
>;
};
@@ -199,7 +199,7 @@
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6
- MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0
>;
};
};
diff --git a/arch/arm/dts/imx8mp-u-boot.dtsi b/arch/arm/dts/imx8mp-u-boot.dtsi
index b5d640df7e..f9883aa133 100644
--- a/arch/arm/dts/imx8mp-u-boot.dtsi
+++ b/arch/arm/dts/imx8mp-u-boot.dtsi
@@ -10,7 +10,7 @@
};
};
-&{/soc@0} {
+&soc {
u-boot,dm-pre-reloc;
u-boot,dm-spl;
};
diff --git a/arch/arm/dts/imx8mp-venice-gw74xx.dts b/arch/arm/dts/imx8mp-venice-gw74xx.dts
index 101d311476..06b4c93c58 100644
--- a/arch/arm/dts/imx8mp-venice-gw74xx.dts
+++ b/arch/arm/dts/imx8mp-venice-gw74xx.dts
@@ -8,6 +8,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
#include "imx8mp.dtsi"
@@ -100,6 +101,12 @@
};
};
+ pcie0_refclk: pcie0-refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
+
pps {
compatible = "pps-gpio";
pinctrl-names = "default";
@@ -123,8 +130,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_can>;
regulator-name = "can2_stby";
- gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>;
- enable-active-high;
+ gpio = <&gpio3 19 GPIO_ACTIVE_LOW>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
@@ -135,13 +141,29 @@
compatible = "regulator-fixed";
regulator-name = "wl";
gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>;
- startup-delay-us = <100>;
+ startup-delay-us = <70000>;
enable-active-high;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
};
};
+&A53_0 {
+ cpu-supply = <®_arm>;
+};
+
+&A53_1 {
+ cpu-supply = <®_arm>;
+};
+
+&A53_2 {
+ cpu-supply = <®_arm>;
+};
+
+&A53_3 {
+ cpu-supply = <®_arm>;
+};
+
/* off-board header */
&ecspi2 {
pinctrl-names = "default";
@@ -200,8 +222,8 @@
&gpio2 {
gpio-line-names =
"", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "",
- "pcie3_wdis#", "", "", "pcie1_wdis@", "pcie2_wdis#", "", "", "",
+ "", "", "", "", "", "", "pcie3_wdis#", "",
+ "", "", "pcie2_wdis#", "", "", "", "", "",
"", "", "", "", "", "", "", "";
};
@@ -362,7 +384,7 @@
regulator-ramp-delay = <3125>;
};
- BUCK2 {
+ reg_arm: BUCK2 {
regulator-name = "BUCK2";
regulator-min-microvolt = <720000>;
regulator-max-microvolt = <1025000>;
@@ -484,35 +506,40 @@
lan1: port@0 {
reg = <0>;
label = "lan1";
+ phy-mode = "internal";
local-mac-address = [00 00 00 00 00 00];
};
lan2: port@1 {
reg = <1>;
label = "lan2";
+ phy-mode = "internal";
local-mac-address = [00 00 00 00 00 00];
};
lan3: port@2 {
reg = <2>;
label = "lan3";
+ phy-mode = "internal";
local-mac-address = [00 00 00 00 00 00];
};
lan4: port@3 {
reg = <3>;
label = "lan4";
+ phy-mode = "internal";
local-mac-address = [00 00 00 00 00 00];
};
lan5: port@4 {
reg = <4>;
label = "lan5";
+ phy-mode = "internal";
local-mac-address = [00 00 00 00 00 00];
};
- port@6 {
- reg = <6>;
+ port@5 {
+ reg = <5>;
label = "cpu";
ethernet = <&fec>;
phy-mode = "rgmii-id";
@@ -542,6 +569,28 @@
status = "okay";
};
+&pcie_phy {
+ fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+ fsl,clkreq-unsupported;
+ clocks = <&pcie0_refclk>;
+ clock-names = "ref";
+ status = "okay";
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie0>;
+ reset-gpio = <&gpio2 17 GPIO_ACTIVE_LOW>;
+ clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
+ <&clk IMX8MP_CLK_PCIE_ROOT>,
+ <&clk IMX8MP_CLK_HSIO_AXI>;
+ clock-names = "pcie", "pcie_aux", "pcie_bus";
+ assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>;
+ assigned-clock-rates = <10000000>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>;
+ status = "okay";
+};
+
/* GPS / off-board header */
&uart1 {
pinctrl-names = "default";
@@ -556,6 +605,21 @@
status = "okay";
};
+/* bluetooth HCI */
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
+ cts-gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
+ rts-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm4330-bt";
+ shutdown-gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
+ };
+};
+
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4>;
@@ -563,20 +627,35 @@
};
/* USB1 - Type C front panel */
-&usb3_phy0 {
+&usb3_0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>;
+ fsl,over-current-active-low;
status = "okay";
};
-&usb3_0 {
- fsl,over-current-active-low;
+&usb3_phy0 {
status = "okay";
};
&usb_dwc3_0 {
- dr_mode = "host";
+ /* dual role is implemented but not a full featured OTG */
+ adp-disable;
+ hnp-disable;
+ srp-disable;
+ dr_mode = "otg";
+ usb-role-switch;
+ role-switch-default-mode = "peripheral";
status = "okay";
+
+ connector {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbcon1>;
+ compatible = "gpio-usb-b-connector", "usb-b-connector";
+ type = "micro";
+ label = "Type-C";
+ id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+ };
};
/* USB2 - USB3.0 Hub */
@@ -596,6 +675,25 @@
status = "okay";
};
+/* SDIO WiFi */
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ bus-width = <4>;
+ non-removable;
+ vmmc-supply = <®_wifi_en>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ wifi@0 {
+ compatible = "cypress,cyw4373-fmac";
+ reg = <0>;
+ };
+};
+
/* eMMC */
&usdhc3 {
assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
@@ -622,15 +720,14 @@
pinctrl_hog: hoggrp {
fsl,pins = <
- MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x40000041 /* DIO0 */
- MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x40000041 /* DIO1 */
- MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x40000041 /* M2SKT_OFF# */
- MX8MP_IOMUXC_SD2_DATA2__GPIO2_IO17 0x40000159 /* PCIE1_WDIS# */
- MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18 0x40000159 /* PCIE2_WDIS# */
- MX8MP_IOMUXC_SD2_CMD__GPIO2_IO14 0x40000159 /* PCIE3_WDIS# */
- MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06 0x40000041 /* M2SKT_RST# */
- MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x40000159 /* M2SKT_WDIS# */
- MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00 0x40000159 /* M2SKT_GDIS# */
+ MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x40000040 /* DIO0 */
+ MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x40000040 /* DIO1 */
+ MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x40000040 /* M2SKT_OFF# */
+ MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18 0x40000150 /* PCIE2_WDIS# */
+ MX8MP_IOMUXC_SD2_CMD__GPIO2_IO14 0x40000150 /* PCIE3_WDIS# */
+ MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06 0x40000040 /* M2SKT_RST# */
+ MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x40000150 /* M2SKT_WDIS# */
+ MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00 0x40000150 /* M2SKT_GDIS# */
MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01 0x40000104 /* UART_TERM */
MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31 0x40000104 /* UART_RS485 */
MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00 0x40000104 /* UART_HALF */
@@ -639,47 +736,47 @@
pinctrl_accel: accelgrp {
fsl,pins = <
- MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x159
+ MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x150
>;
};
pinctrl_eqos: eqosgrp {
fsl,pins = <
- MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3
- MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3
- MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91
- MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91
- MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91
- MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91
- MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91
- MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91
- MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f
- MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f
- MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f
- MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f
- MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f
- MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f
- MX8MP_IOMUXC_SAI3_RXD__GPIO4_IO30 0x141 /* RST# */
- MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x159 /* IRQ# */
+ MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x2
+ MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x2
+ MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x90
+ MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x90
+ MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x90
+ MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90
+ MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90
+ MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90
+ MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x16
+ MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x16
+ MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x16
+ MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x16
+ MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x16
+ MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x16
+ MX8MP_IOMUXC_SAI3_RXD__GPIO4_IO30 0x140 /* RST# */
+ MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x150 /* IRQ# */
>;
};
pinctrl_fec: fecgrp {
fsl,pins = <
- MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91
- MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91
- MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91
- MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91
- MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91
- MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91
- MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f
- MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f
- MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f
- MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f
- MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f
- MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f
- MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN 0x141
- MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT 0x141
+ MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x90
+ MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x90
+ MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x90
+ MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x90
+ MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x90
+ MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x90
+ MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x16
+ MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x16
+ MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x16
+ MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x16
+ MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x16
+ MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x16
+ MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN 0x140
+ MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT 0x140
>;
};
@@ -692,61 +789,67 @@
pinctrl_gsc: gscgrp {
fsl,pins = <
- MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x159
+ MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x150
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
- MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c3
- MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c3
+ MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2
+ MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c2
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
- MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c3
- MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c3
+ MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2
+ MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c2
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
- MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c3
- MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c3
+ MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c2
+ MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c2
>;
};
pinctrl_i2c4: i2c4grp {
fsl,pins = <
- MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c3
- MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c3
+ MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c2
+ MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c2
>;
};
pinctrl_ksz: kszgrp {
fsl,pins = <
- MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x159 /* IRQ# */
- MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02 0x141 /* RST# */
+ MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x150 /* IRQ# */
+ MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02 0x140 /* RST# */
>;
};
pinctrl_gpio_leds: ledgrp {
fsl,pins = <
- MX8MP_IOMUXC_SD2_DATA0__GPIO2_IO15 0x19
- MX8MP_IOMUXC_SD2_DATA1__GPIO2_IO16 0x19
+ MX8MP_IOMUXC_SD2_DATA0__GPIO2_IO15 0x10
+ MX8MP_IOMUXC_SD2_DATA1__GPIO2_IO16 0x10
+ >;
+ };
+
+ pinctrl_pcie0: pciegrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_DATA2__GPIO2_IO17 0x110
>;
};
pinctrl_pmic: pmicgrp {
fsl,pins = <
- MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x141
+ MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x140
>;
};
pinctrl_pps: ppsgrp {
fsl,pins = <
- MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x141
+ MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x140
>;
};
@@ -758,22 +861,22 @@
pinctrl_reg_usb2: regusb2grp {
fsl,pins = <
- MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x141
+ MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x140
>;
};
pinctrl_reg_wifi: regwifigrp {
fsl,pins = <
- MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09 0x119
+ MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09 0x110
>;
};
pinctrl_sai2: sai2grp {
fsl,pins = <
- MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC
- MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00
- MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK
- MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK
+ MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC 0xd6
+ MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00 0xd6
+ MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK 0xd6
+ MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK 0xd6
>;
};
@@ -811,7 +914,7 @@
pinctrl_uart3_gpio: uart3gpiogrp {
fsl,pins = <
- MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08 0x119
+ MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08 0x110
>;
};
@@ -825,7 +928,12 @@
pinctrl_usb1: usb1grp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC 0x140
- MX8MP_IOMUXC_GPIO1_IO10__USB1_OTG_ID 0x140
+ >;
+ };
+
+ pinctrl_usbcon1: usb1congrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x140
>;
};
@@ -840,6 +948,28 @@
>;
};
+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x194
+ MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d4
+ MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d4
+ MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d4
+ MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d4
+ MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d4
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x196
+ MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d6
+ MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d6
+ MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d6
+ MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d6
+ MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d6
+ >;
+ };
+
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190
diff --git a/arch/arm/dts/imx8mp-verdin.dtsi b/arch/arm/dts/imx8mp-verdin.dtsi
index 68100a1726..7b712d1888 100644
--- a/arch/arm/dts/imx8mp-verdin.dtsi
+++ b/arch/arm/dts/imx8mp-verdin.dtsi
@@ -49,7 +49,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
- wakeup {
+ button-wakeup {
debounce-interval = <10>;
/* Verdin CTRL_WAKE1_MICO# (SODIMM 252) */
gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
@@ -146,6 +146,30 @@
};
};
+&A53_0 {
+ cpu-supply = <®_vdd_arm>;
+};
+
+&A53_1 {
+ cpu-supply = <®_vdd_arm>;
+};
+
+&A53_2 {
+ cpu-supply = <®_vdd_arm>;
+};
+
+&A53_3 {
+ cpu-supply = <®_vdd_arm>;
+};
+
+&cpu_alert0 {
+ temperature = <95000>;
+};
+
+&cpu_crit0 {
+ temperature = <105000>;
+};
+
/* Verdin SPI_1 */
&ecspi1 {
#address-cells = <1>;
@@ -445,7 +469,7 @@
regulator-ramp-delay = <3125>;
};
- BUCK2 {
+ reg_vdd_arm: BUCK2 {
nxp,dvs-run-voltage = <950000>;
nxp,dvs-standby-voltage = <850000>;
regulator-always-on;
@@ -619,7 +643,7 @@
interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
reg = <0x4a>;
/* Verdin GPIO_2 (SODIMM 208) */
- reset-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
status = "disabled";
};
};
@@ -696,7 +720,7 @@
pinctrl-0 = <&pinctrl_gpio_9_dsi>, <&pinctrl_i2s_2_bclk_touch_reset>;
reg = <0x4a>;
/* Verdin I2S_2_BCLK (TOUCH_RESET#, SODIMM 42) */
- reset-gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
status = "disabled";
};
diff --git a/arch/arm/dts/imx8mp.dtsi b/arch/arm/dts/imx8mp.dtsi
index d9542dfff8..bb916a0948 100644
--- a/arch/arm/dts/imx8mp.dtsi
+++ b/arch/arm/dts/imx8mp.dtsi
@@ -5,8 +5,10 @@
#include <dt-bindings/clock/imx8mp-clock.h>
#include <dt-bindings/power/imx8mp-power.h>
+#include <dt-bindings/reset/imx8mp-reset.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/interconnect/fsl,imx8mp.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
@@ -195,7 +197,7 @@
clk_ext4: clock-ext4 {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency= <133000000>;
+ clock-frequency = <133000000>;
clock-output-names = "clk_ext4";
};
@@ -293,7 +295,7 @@
arm,no-tick-in-suspend;
};
- soc@0 {
+ soc: soc@0 {
compatible = "fsl,imx8mp-soc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
@@ -469,6 +471,11 @@
wakeup-source;
status = "disabled";
};
+
+ snvs_lpgpr: snvs-lpgpr {
+ compatible = "fsl,imx8mp-snvs-lpgpr",
+ "fsl,imx7d-snvs-lpgpr";
+ };
};
clk: clock-controller@30380000 {
@@ -595,7 +602,34 @@
pgc_ispdwp: power-domain@18 {
#power-domain-cells = <0>;
reg = <IMX8MP_POWER_DOMAIN_MEDIAMIX_ISPDWP>;
- clocks = <&clk IMX8MP_CLK_MEDIA_ISP_DIV>;
+ clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>;
+ };
+
+ pgc_vpumix: power-domain@19 {
+ #power-domain-cells = <0>;
+ reg = <IMX8MP_POWER_DOMAIN_VPUMIX>;
+ clocks =<&clk IMX8MP_CLK_VPU_ROOT>;
+ };
+
+ pgc_vpu_g1: power-domain@20 {
+ #power-domain-cells = <0>;
+ power-domains = <&pgc_vpumix>;
+ reg = <IMX8MP_POWER_DOMAIN_VPU_G1>;
+ clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>;
+ };
+
+ pgc_vpu_g2: power-domain@21 {
+ #power-domain-cells = <0>;
+ power-domains = <&pgc_vpumix>;
+ reg = <IMX8MP_POWER_DOMAIN_VPU_G2>;
+ clocks = <&clk IMX8MP_CLK_VPU_G2_ROOT>;
+ };
+
+ pgc_vpu_vc8000e: power-domain@22 {
+ #power-domain-cells = <0>;
+ power-domains = <&pgc_vpumix>;
+ reg = <IMX8MP_POWER_DOMAIN_VPU_VC8000E>;
+ clocks = <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>;
};
};
};
@@ -791,6 +825,7 @@
compatible = "fsl,sec-v4.0-job-ring";
reg = <0x1000 0x1000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
};
sec_jr1: jr@2000 {
@@ -903,7 +938,7 @@
<&clk IMX8MP_CLK_USDHC1_ROOT>;
clock-names = "ipg", "ahb", "per";
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
@@ -917,7 +952,7 @@
<&clk IMX8MP_CLK_USDHC2_ROOT>;
clock-names = "ipg", "ahb", "per";
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
@@ -931,7 +966,7 @@
<&clk IMX8MP_CLK_USDHC3_ROOT>;
clock-names = "ipg", "ahb", "per";
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
@@ -1018,6 +1053,26 @@
};
};
+ noc: interconnect@32700000 {
+ compatible = "fsl,imx8mp-noc", "fsl,imx8m-noc";
+ reg = <0x32700000 0x100000>;
+ clocks = <&clk IMX8MP_CLK_NOC>;
+ #interconnect-cells = <1>;
+ operating-points-v2 = <&noc_opp_table>;
+
+ noc_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200M {
+ opp-hz = /bits/ 64 <200000000>;
+ };
+
+ opp-1000M {
+ opp-hz = /bits/ 64 <1000000000>;
+ };
+ };
+ };
+
aips4: bus@32c00000 {
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x32c00000 0x400000>;
@@ -1043,6 +1098,18 @@
"lcdif1", "isi", "mipi-csi2",
"lcdif2", "isp", "dwe",
"mipi-dsi2";
+ interconnects =
+ <&noc IMX8MP_ICM_LCDIF_RD &noc IMX8MP_ICN_MEDIA>,
+ <&noc IMX8MP_ICM_LCDIF_WR &noc IMX8MP_ICN_MEDIA>,
+ <&noc IMX8MP_ICM_ISI0 &noc IMX8MP_ICN_MEDIA>,
+ <&noc IMX8MP_ICM_ISI1 &noc IMX8MP_ICN_MEDIA>,
+ <&noc IMX8MP_ICM_ISI2 &noc IMX8MP_ICN_MEDIA>,
+ <&noc IMX8MP_ICM_ISP0 &noc IMX8MP_ICN_MEDIA>,
+ <&noc IMX8MP_ICM_ISP1 &noc IMX8MP_ICN_MEDIA>,
+ <&noc IMX8MP_ICM_DWE &noc IMX8MP_ICN_MEDIA>;
+ interconnect-names = "lcdif-rd", "lcdif-wr", "isi0",
+ "isi1", "isi2", "isp0", "isp1",
+ "dwe";
clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
<&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
<&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>,
@@ -1063,6 +1130,17 @@
#power-domain-cells = <1>;
};
+ pcie_phy: pcie-phy@32f00000 {
+ compatible = "fsl,imx8mp-pcie-phy";
+ reg = <0x32f00000 0x10000>;
+ resets = <&src IMX8MP_RESET_PCIEPHY>,
+ <&src IMX8MP_RESET_PCIEPHY_PERST>;
+ reset-names = "pciephy", "perst";
+ power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE_PHY>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
hsio_blk_ctrl: blk-ctrl@32f10000 {
compatible = "fsl,imx8mp-hsio-blk-ctrl", "syscon";
reg = <0x32f10000 0x24>;
@@ -1074,10 +1152,46 @@
<&pgc_hsiomix>, <&pgc_pcie_phy>;
power-domain-names = "bus", "usb", "usb-phy1",
"usb-phy2", "pcie", "pcie-phy";
+ interconnects = <&noc IMX8MP_ICM_NOC_PCIE &noc IMX8MP_ICN_HSIO>,
+ <&noc IMX8MP_ICM_USB1 &noc IMX8MP_ICN_HSIO>,
+ <&noc IMX8MP_ICM_USB2 &noc IMX8MP_ICN_HSIO>,
+ <&noc IMX8MP_ICM_PCIE &noc IMX8MP_ICN_HSIO>;
+ interconnect-names = "noc-pcie", "usb1", "usb2", "pcie";
#power-domain-cells = <1>;
};
};
+ pcie: pcie@33800000 {
+ compatible = "fsl,imx8mp-pcie";
+ reg = <0x33800000 0x400000>, <0x1ff00000 0x80000>;
+ reg-names = "dbi", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ bus-range = <0x00 0xff>;
+ ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000>, /* downstream I/O 64KB */
+ <0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */
+ num-lanes = <1>;
+ num-viewport = <4>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,max-link-speed = <3>;
+ linux,pci-domain = <0>;
+ power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE>;
+ resets = <&src IMX8MP_RESET_PCIE_CTRL_APPS_EN>,
+ <&src IMX8MP_RESET_PCIE_CTRL_APPS_TURNOFF>;
+ reset-names = "apps", "turnoff";
+ phys = <&pcie_phy>;
+ phy-names = "pcie-phy";
+ status = "disabled";
+ };
+
gpu3d: gpu@38000000 {
compatible = "vivante,gc";
reg = <0x38000000 0x8000>;
@@ -1109,6 +1223,23 @@
power-domains = <&pgc_gpu2d>;
};
+ vpumix_blk_ctrl: blk-ctrl@38330000 {
+ compatible = "fsl,imx8mp-vpu-blk-ctrl", "syscon";
+ reg = <0x38330000 0x100>;
+ #power-domain-cells = <1>;
+ power-domains = <&pgc_vpumix>, <&pgc_vpu_g1>,
+ <&pgc_vpu_g2>, <&pgc_vpu_vc8000e>;
+ power-domain-names = "bus", "g1", "g2", "vc8000e";
+ clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>,
+ <&clk IMX8MP_CLK_VPU_G2_ROOT>,
+ <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>;
+ clock-names = "g1", "g2", "vc8000e";
+ interconnects = <&noc IMX8MP_ICM_VPU_G1 &noc IMX8MP_ICN_VIDEO>,
+ <&noc IMX8MP_ICM_VPU_G2 &noc IMX8MP_ICN_VIDEO>,
+ <&noc IMX8MP_ICM_VPU_H1 &noc IMX8MP_ICN_VIDEO>;
+ interconnect-names = "g1", "g2", "vc8000e";
+ };
+
gic: interrupt-controller@38800000 {
compatible = "arm,gic-v3";
reg = <0x38800000 0x10000>,
@@ -1168,7 +1299,7 @@
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb3_phy0>, <&usb3_phy0>;
phy-names = "usb2-phy", "usb3-phy";
- snps,dis-u2-freeclk-exists-quirk;
+ snps,gfladj-refclk-lpm-sel-quirk;
};
};
@@ -1210,7 +1341,7 @@
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb3_phy1>, <&usb3_phy1>;
phy-names = "usb2-phy", "usb3-phy";
- snps,dis-u2-freeclk-exists-quirk;
+ snps,gfladj-refclk-lpm-sel-quirk;
};
};
diff --git a/include/dt-bindings/clock/imx8mp-clock.h b/include/dt-bindings/clock/imx8mp-clock.h
index e8d68fbb6e..9d5cc2ddde 100644
--- a/include/dt-bindings/clock/imx8mp-clock.h
+++ b/include/dt-bindings/clock/imx8mp-clock.h
@@ -117,7 +117,6 @@
#define IMX8MP_CLK_AUDIO_AHB 108
#define IMX8MP_CLK_MIPI_DSI_ESC_RX 109
#define IMX8MP_CLK_IPG_ROOT 110
-#define IMX8MP_CLK_IPG_AUDIO_ROOT 111
#define IMX8MP_CLK_DRAM_ALT 112
#define IMX8MP_CLK_DRAM_APB 113
#define IMX8MP_CLK_VPU_G1 114
@@ -125,7 +124,6 @@
#define IMX8MP_CLK_CAN1 116
#define IMX8MP_CLK_CAN2 117
#define IMX8MP_CLK_MEMREPAIR 118
-#define IMX8MP_CLK_PCIE_PHY 119
#define IMX8MP_CLK_PCIE_AUX 120
#define IMX8MP_CLK_I2C5 121
#define IMX8MP_CLK_I2C6 122
@@ -182,8 +180,6 @@
#define IMX8MP_CLK_MEDIA_CAM2_PIX 173
#define IMX8MP_CLK_MEDIA_LDB 174
#define IMX8MP_CLK_MEDIA_MIPI_CSI2_ESC 175
-#define IMX8MP_CLK_PCIE2_CTRL 176
-#define IMX8MP_CLK_PCIE2_PHY 177
#define IMX8MP_CLK_MEDIA_MIPI_TEST_BYTE 178
#define IMX8MP_CLK_ECSPI3 179
#define IMX8MP_CLK_PDM 180
@@ -321,8 +317,15 @@
#define IMX8MP_CLK_AUDIO_AXI 310
#define IMX8MP_CLK_HSIO_AXI 311
#define IMX8MP_CLK_MEDIA_ISP 312
+#define IMX8MP_CLK_MEDIA_DISP2_PIX 313
+#define IMX8MP_CLK_CLKOUT1_SEL 314
+#define IMX8MP_CLK_CLKOUT1_DIV 315
+#define IMX8MP_CLK_CLKOUT1 316
+#define IMX8MP_CLK_CLKOUT2_SEL 317
+#define IMX8MP_CLK_CLKOUT2_DIV 318
+#define IMX8MP_CLK_CLKOUT2 319
-#define IMX8MP_CLK_END 313
+#define IMX8MP_CLK_END 320
#define IMX8MP_CLK_AUDIOMIX_SAI1_IPG 0
#define IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1 1
diff --git a/include/dt-bindings/interconnect/fsl,imx8mp.h b/include/dt-bindings/interconnect/fsl,imx8mp.h
new file mode 100644
index 0000000000..7357d41752
--- /dev/null
+++ b/include/dt-bindings/interconnect/fsl,imx8mp.h
@@ -0,0 +1,59 @@
+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
+/*
+ * Interconnect framework driver for i.MX SoC
+ *
+ * Copyright 2022 NXP
+ * Peng Fan <peng.fan@nxp.com>
+ */
+
+#ifndef __DT_BINDINGS_INTERCONNECT_IMX8MP_H
+#define __DT_BINDINGS_INTERCONNECT_IMX8MP_H
+
+#define IMX8MP_ICN_NOC 0
+#define IMX8MP_ICN_MAIN 1
+#define IMX8MP_ICS_DRAM 2
+#define IMX8MP_ICS_OCRAM 3
+#define IMX8MP_ICM_A53 4
+#define IMX8MP_ICM_SUPERMIX 5
+#define IMX8MP_ICM_GIC 6
+#define IMX8MP_ICM_MLMIX 7
+
+#define IMX8MP_ICN_AUDIO 8
+#define IMX8MP_ICM_DSP 9
+#define IMX8MP_ICM_SDMA2PER 10
+#define IMX8MP_ICM_SDMA2BURST 11
+#define IMX8MP_ICM_SDMA3PER 12
+#define IMX8MP_ICM_SDMA3BURST 13
+#define IMX8MP_ICM_EDMA 14
+
+#define IMX8MP_ICN_GPU 15
+#define IMX8MP_ICM_GPU2D 16
+#define IMX8MP_ICM_GPU3D 17
+
+#define IMX8MP_ICN_HDMI 18
+#define IMX8MP_ICM_HRV 19
+#define IMX8MP_ICM_LCDIF_HDMI 20
+#define IMX8MP_ICM_HDCP 21
+
+#define IMX8MP_ICN_HSIO 22
+#define IMX8MP_ICM_NOC_PCIE 23
+#define IMX8MP_ICM_USB1 24
+#define IMX8MP_ICM_USB2 25
+#define IMX8MP_ICM_PCIE 26
+
+#define IMX8MP_ICN_MEDIA 27
+#define IMX8MP_ICM_LCDIF_RD 28
+#define IMX8MP_ICM_LCDIF_WR 29
+#define IMX8MP_ICM_ISI0 30
+#define IMX8MP_ICM_ISI1 31
+#define IMX8MP_ICM_ISI2 32
+#define IMX8MP_ICM_ISP0 33
+#define IMX8MP_ICM_ISP1 34
+#define IMX8MP_ICM_DWE 35
+
+#define IMX8MP_ICN_VIDEO 36
+#define IMX8MP_ICM_VPU_G1 37
+#define IMX8MP_ICM_VPU_G2 38
+#define IMX8MP_ICM_VPU_H1 39
+
+#endif /* __DT_BINDINGS_INTERCONNECT_IMX8MP_H */
diff --git a/include/dt-bindings/power/imx8mp-power.h b/include/dt-bindings/power/imx8mp-power.h
index 3f72bf7818..2fe3c2abad 100644
--- a/include/dt-bindings/power/imx8mp-power.h
+++ b/include/dt-bindings/power/imx8mp-power.h
@@ -38,9 +38,22 @@
#define IMX8MP_MEDIABLK_PD_ISI 3
#define IMX8MP_MEDIABLK_PD_MIPI_CSI2_2 4
#define IMX8MP_MEDIABLK_PD_LCDIF_2 5
-#define IMX8MP_MEDIABLK_PD_ISP2 6
-#define IMX8MP_MEDIABLK_PD_ISP1 7
-#define IMX8MP_MEDIABLK_PD_DWE 8
-#define IMX8MP_MEDIABLK_PD_MIPI_DSI_2 9
+#define IMX8MP_MEDIABLK_PD_ISP 6
+#define IMX8MP_MEDIABLK_PD_DWE 7
+#define IMX8MP_MEDIABLK_PD_MIPI_DSI_2 8
+
+#define IMX8MP_HDMIBLK_PD_IRQSTEER 0
+#define IMX8MP_HDMIBLK_PD_LCDIF 1
+#define IMX8MP_HDMIBLK_PD_PAI 2
+#define IMX8MP_HDMIBLK_PD_PVI 3
+#define IMX8MP_HDMIBLK_PD_TRNG 4
+#define IMX8MP_HDMIBLK_PD_HDMI_TX 5
+#define IMX8MP_HDMIBLK_PD_HDMI_TX_PHY 6
+#define IMX8MP_HDMIBLK_PD_HDCP 7
+#define IMX8MP_HDMIBLK_PD_HRV 8
+
+#define IMX8MP_VPUBLK_PD_G1 0
+#define IMX8MP_VPUBLK_PD_G2 1
+#define IMX8MP_VPUBLK_PD_VC8000E 2
#endif
diff --git a/include/dt-bindings/reset/imx8mp-reset.h b/include/dt-bindings/reset/imx8mp-reset.h
new file mode 100644
index 0000000000..2e8c9104b6
--- /dev/null
+++ b/include/dt-bindings/reset/imx8mp-reset.h
@@ -0,0 +1,50 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2020 NXP
+ */
+
+#ifndef DT_BINDING_RESET_IMX8MP_H
+#define DT_BINDING_RESET_IMX8MP_H
+
+#define IMX8MP_RESET_A53_CORE_POR_RESET0 0
+#define IMX8MP_RESET_A53_CORE_POR_RESET1 1
+#define IMX8MP_RESET_A53_CORE_POR_RESET2 2
+#define IMX8MP_RESET_A53_CORE_POR_RESET3 3
+#define IMX8MP_RESET_A53_CORE_RESET0 4
+#define IMX8MP_RESET_A53_CORE_RESET1 5
+#define IMX8MP_RESET_A53_CORE_RESET2 6
+#define IMX8MP_RESET_A53_CORE_RESET3 7
+#define IMX8MP_RESET_A53_DBG_RESET0 8
+#define IMX8MP_RESET_A53_DBG_RESET1 9
+#define IMX8MP_RESET_A53_DBG_RESET2 10
+#define IMX8MP_RESET_A53_DBG_RESET3 11
+#define IMX8MP_RESET_A53_ETM_RESET0 12
+#define IMX8MP_RESET_A53_ETM_RESET1 13
+#define IMX8MP_RESET_A53_ETM_RESET2 14
+#define IMX8MP_RESET_A53_ETM_RESET3 15
+#define IMX8MP_RESET_A53_SOC_DBG_RESET 16
+#define IMX8MP_RESET_A53_L2RESET 17
+#define IMX8MP_RESET_SW_NON_SCLR_M7C_RST 18
+#define IMX8MP_RESET_OTG1_PHY_RESET 19
+#define IMX8MP_RESET_OTG2_PHY_RESET 20
+#define IMX8MP_RESET_SUPERMIX_RESET 21
+#define IMX8MP_RESET_AUDIOMIX_RESET 22
+#define IMX8MP_RESET_MLMIX_RESET 23
+#define IMX8MP_RESET_PCIEPHY 24
+#define IMX8MP_RESET_PCIEPHY_PERST 25
+#define IMX8MP_RESET_PCIE_CTRL_APPS_EN 26
+#define IMX8MP_RESET_PCIE_CTRL_APPS_TURNOFF 27
+#define IMX8MP_RESET_HDMI_PHY_APB_RESET 28
+#define IMX8MP_RESET_MEDIA_RESET 29
+#define IMX8MP_RESET_GPU2D_RESET 30
+#define IMX8MP_RESET_GPU3D_RESET 31
+#define IMX8MP_RESET_GPU_RESET 32
+#define IMX8MP_RESET_VPU_RESET 33
+#define IMX8MP_RESET_VPU_G1_RESET 34
+#define IMX8MP_RESET_VPU_G2_RESET 35
+#define IMX8MP_RESET_VPUVC8KE_RESET 36
+#define IMX8MP_RESET_NOC_RESET 37
+
+#define IMX8MP_RESET_NUM 38
+
+#endif
--
2.35.1
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH v5 7/8] imx8mn: synchronise device tree with linux
2022-11-07 21:22 [PATCH v5 0/8] arm: dts: imx: sync device trees with upstream linux kernel part 1 Marcel Ziswiler
` (5 preceding siblings ...)
2022-11-07 21:22 ` [PATCH v5 6/8] imx8mp: " Marcel Ziswiler
@ 2022-11-07 21:22 ` Marcel Ziswiler
2022-11-08 16:37 ` sbabic
2022-11-07 21:22 ` [PATCH v5 8/8] imx8mm: " Marcel Ziswiler
2022-11-07 21:29 ` [PATCH v5 0/8] arm: dts: imx: sync device trees with upstream linux kernel part 1 Fabio Estevam
8 siblings, 1 reply; 19+ messages in thread
From: Marcel Ziswiler @ 2022-11-07 21:22 UTC (permalink / raw)
To: u-boot
Cc: Giulio Benetti, Fabio Estevam, Jesse Taube, Marcel Ziswiler,
Tim Harvey, Ariel D'Alessandro, NXP i.MX U-Boot Team,
Stefano Babic
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Synchronise device tree with linux v6.1-rc3.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-By: Tim Harvey <tharvey@gateworks.com> #imx8m{m,n,p}-venice-*
---
Changes in v5:
- Add Tim's tested-by. Thanks!
Changes in v4:
- Re-based after Adam's common imx8mn-u-boot device tree creation.
- Re-synched with v6.1-rc3.
arch/arm/dts/imx8mn-beacon-baseboard.dtsi | 4 +-
arch/arm/dts/imx8mn-evk.dtsi | 45 ++++++++++++++++++++++-
arch/arm/dts/imx8mn-var-som-symphony.dts | 6 +--
arch/arm/dts/imx8mn-venice-gw7902.dts | 9 ++---
arch/arm/dts/imx8mn.dtsi | 14 +++----
include/dt-bindings/interconnect/imx8mn.h | 41 +++++++++++++++++++++
6 files changed, 101 insertions(+), 18 deletions(-)
create mode 100644 include/dt-bindings/interconnect/imx8mn.h
diff --git a/arch/arm/dts/imx8mn-beacon-baseboard.dtsi b/arch/arm/dts/imx8mn-beacon-baseboard.dtsi
index 02f37dcda7..9e82069c94 100644
--- a/arch/arm/dts/imx8mn-beacon-baseboard.dtsi
+++ b/arch/arm/dts/imx8mn-beacon-baseboard.dtsi
@@ -146,7 +146,7 @@
};
&easrc {
- fsl,asrc-rate = <48000>;
+ fsl,asrc-rate = <48000>;
status = "okay";
};
@@ -182,7 +182,7 @@
&usbotg1 {
vbus-supply = <®_usb_otg_vbus>;
disable-over-current;
- dr_mode="otg";
+ dr_mode = "otg";
status = "okay";
};
diff --git a/arch/arm/dts/imx8mn-evk.dtsi b/arch/arm/dts/imx8mn-evk.dtsi
index d1f6cccfa0..261c365400 100644
--- a/arch/arm/dts/imx8mn-evk.dtsi
+++ b/arch/arm/dts/imx8mn-evk.dtsi
@@ -47,6 +47,11 @@
linux,autosuspend-period = <125>;
};
+ audio_codec_bt_sco: audio-codec-bt-sco {
+ compatible = "linux,bt-sco";
+ #sound-dai-cells = <1>;
+ };
+
wm8524: audio-codec {
#sound-dai-cells = <0>;
compatible = "wlf,wm8524";
@@ -57,6 +62,25 @@
clock-names = "mclk";
};
+ sound-bt-sco {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "bt-sco-audio";
+ simple-audio-card,format = "dsp_a";
+ simple-audio-card,bitclock-inversion;
+ simple-audio-card,frame-master = <&btcpu>;
+ simple-audio-card,bitclock-master = <&btcpu>;
+
+ btcpu: simple-audio-card,cpu {
+ sound-dai = <&sai2>;
+ dai-tdm-slot-num = <2>;
+ dai-tdm-slot-width = <16>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&audio_codec_bt_sco 1>;
+ };
+ };
+
sound-wm8524 {
compatible = "fsl,imx-audio-wm8524";
model = "wm8524-audio";
@@ -78,7 +102,7 @@
};
&easrc {
- fsl,asrc-rate = <48000>;
+ fsl,asrc-rate = <48000>;
status = "okay";
};
@@ -183,6 +207,16 @@
};
};
+&sai2 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai2>;
+ assigned-clocks = <&clk IMX8MN_CLK_SAI2>;
+ assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <24576000>;
+ status = "okay";
+};
+
&sai3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai3>;
@@ -354,6 +388,15 @@
>;
};
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6
+ MX8MN_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6
+ MX8MN_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6
+ MX8MN_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6
+ >;
+ };
+
pinctrl_sai3: sai3grp {
fsl,pins = <
MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6
diff --git a/arch/arm/dts/imx8mn-var-som-symphony.dts b/arch/arm/dts/imx8mn-var-som-symphony.dts
index f61c48776c..3ed7021a48 100644
--- a/arch/arm/dts/imx8mn-var-som-symphony.dts
+++ b/arch/arm/dts/imx8mn-var-som-symphony.dts
@@ -26,19 +26,19 @@
gpio-keys {
compatible = "gpio-keys";
- back {
+ key-back {
label = "Back";
gpios = <&pca9534 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_BACK>;
};
- home {
+ key-home {
label = "Home";
gpios = <&pca9534 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
};
- menu {
+ key-menu {
label = "Menu";
gpios = <&pca9534 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_MENU>;
diff --git a/arch/arm/dts/imx8mn-venice-gw7902.dts b/arch/arm/dts/imx8mn-venice-gw7902.dts
index 367a232675..dd4302ac1d 100644
--- a/arch/arm/dts/imx8mn-venice-gw7902.dts
+++ b/arch/arm/dts/imx8mn-venice-gw7902.dts
@@ -39,13 +39,13 @@
gpio-keys {
compatible = "gpio-keys";
- user-pb {
+ key-user-pb {
label = "user_pb";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
- user-pb1x {
+ key-user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
@@ -59,14 +59,14 @@
interrupts = <1>;
};
- eeprom-wp {
+ key-eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
interrupts = <2>;
};
- tamper {
+ key-tamper {
label = "tamper";
linux,code = <BTN_4>;
interrupt-parent = <&gsc>;
@@ -213,7 +213,6 @@
compatible = "microchip,mcp2515";
reg = <0>;
clocks = <&can20m>;
- oscillator-frequency = <20000000>;
interrupt-parent = <&gpio2>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
spi-max-frequency = <10000000>;
diff --git a/arch/arm/dts/imx8mn.dtsi b/arch/arm/dts/imx8mn.dtsi
index e41e1d56f9..cb2836bfbd 100644
--- a/arch/arm/dts/imx8mn.dtsi
+++ b/arch/arm/dts/imx8mn.dtsi
@@ -212,7 +212,7 @@
clk_ext4: clock-ext4 {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency= <133000000>;
+ clock-frequency = <133000000>;
clock-output-names = "clk_ext4";
};
@@ -269,7 +269,7 @@
arm,no-tick-in-suspend;
};
- soc@0 {
+ soc: soc@0 {
compatible = "fsl,imx8mn-soc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
@@ -422,7 +422,7 @@
"ctx2_rx", "ctx2_tx",
"ctx3_rx", "ctx3_tx";
firmware-name = "imx/easrc/easrc-imx8mn.bin";
- fsl,asrc-rate = <8000>;
+ fsl,asrc-rate = <8000>;
fsl,asrc-format = <2>;
status = "disabled";
};
@@ -672,7 +672,6 @@
<&clk IMX8MN_CLK_GPU_SHADER>,
<&clk IMX8MN_CLK_GPU_BUS_ROOT>,
<&clk IMX8MN_CLK_GPU_AHB>;
- resets = <&src IMX8MQ_RESET_GPU_RESET>;
};
pgc_dispmix: power-domain@3 {
@@ -857,6 +856,7 @@
compatible = "fsl,sec-v4.0-job-ring";
reg = <0x1000 0x1000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
};
sec_jr1: jr@2000 {
@@ -941,7 +941,7 @@
<&clk IMX8MN_CLK_USDHC1_ROOT>;
clock-names = "ipg", "ahb", "per";
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
@@ -955,7 +955,7 @@
<&clk IMX8MN_CLK_USDHC2_ROOT>;
clock-names = "ipg", "ahb", "per";
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
@@ -969,7 +969,7 @@
<&clk IMX8MN_CLK_USDHC3_ROOT>;
clock-names = "ipg", "ahb", "per";
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
diff --git a/include/dt-bindings/interconnect/imx8mn.h b/include/dt-bindings/interconnect/imx8mn.h
new file mode 100644
index 0000000000..307b977100
--- /dev/null
+++ b/include/dt-bindings/interconnect/imx8mn.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Interconnect framework driver for i.MX SoC
+ *
+ * Copyright (c) 2019-2020, NXP
+ */
+
+#ifndef __DT_BINDINGS_INTERCONNECT_IMX8MN_H
+#define __DT_BINDINGS_INTERCONNECT_IMX8MN_H
+
+#define IMX8MN_ICN_NOC 1
+#define IMX8MN_ICS_DRAM 2
+#define IMX8MN_ICS_OCRAM 3
+#define IMX8MN_ICM_A53 4
+
+#define IMX8MN_ICM_GPU 5
+#define IMX8MN_ICN_GPU 6
+
+#define IMX8MN_ICM_CSI1 7
+#define IMX8MN_ICM_CSI2 8
+#define IMX8MN_ICM_ISI 9
+#define IMX8MN_ICM_LCDIF 10
+#define IMX8MN_ICN_MIPI 11
+
+#define IMX8MN_ICM_USB 12
+
+#define IMX8MN_ICM_SDMA2 13
+#define IMX8MN_ICM_SDMA3 14
+#define IMX8MN_ICN_AUDIO 15
+
+#define IMX8MN_ICN_ENET 16
+#define IMX8MN_ICM_ENET 17
+
+#define IMX8MN_ICM_NAND 18
+#define IMX8MN_ICM_SDMA1 19
+#define IMX8MN_ICM_USDHC1 20
+#define IMX8MN_ICM_USDHC2 21
+#define IMX8MN_ICM_USDHC3 22
+#define IMX8MN_ICN_MAIN 23
+
+#endif /* __DT_BINDINGS_INTERCONNECT_IMX8MN_H */
--
2.35.1
^ permalink raw reply related [flat|nested] 19+ messages in thread
* [PATCH v5 8/8] imx8mm: synchronise device tree with linux
2022-11-07 21:22 [PATCH v5 0/8] arm: dts: imx: sync device trees with upstream linux kernel part 1 Marcel Ziswiler
` (6 preceding siblings ...)
2022-11-07 21:22 ` [PATCH v5 7/8] imx8mn: " Marcel Ziswiler
@ 2022-11-07 21:22 ` Marcel Ziswiler
2022-11-08 16:39 ` sbabic
2022-11-07 21:29 ` [PATCH v5 0/8] arm: dts: imx: sync device trees with upstream linux kernel part 1 Fabio Estevam
8 siblings, 1 reply; 19+ messages in thread
From: Marcel Ziswiler @ 2022-11-07 21:22 UTC (permalink / raw)
To: u-boot
Cc: Giulio Benetti, Fabio Estevam, Jesse Taube, Marcel Ziswiler,
Tim Harvey, NXP i.MX U-Boot Team, Stefano Babic
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Synchronise device tree with linux v6.1-rc3.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-By: Tim Harvey <tharvey@gateworks.com> #imx8m{m,n,p}-venice-*
---
Changes in v5:
- Add Tim's tested-by. Thanks!
Changes in v4:
- Re-synched with v6.1-rc3.
arch/arm/dts/imx8mm-beacon-baseboard.dtsi | 4 +-
arch/arm/dts/imx8mm-evk.dtsi | 43 +++++++++++++++++++
arch/arm/dts/imx8mm-icore-mx8mm.dtsi | 14 +++----
arch/arm/dts/imx8mm-mx8menlo.dts | 14 +++----
arch/arm/dts/imx8mm-u-boot.dtsi | 2 +-
arch/arm/dts/imx8mm-venice-gw700x.dtsi | 24 +++++------
arch/arm/dts/imx8mm-venice-gw7901.dts | 12 ++++--
arch/arm/dts/imx8mm-venice-gw7902.dts | 14 +++----
arch/arm/dts/imx8mm-venice-gw7903.dts | 6 +--
arch/arm/dts/imx8mm-venice-gw7904.dts | 4 ++
arch/arm/dts/imx8mm-verdin.dtsi | 50 +++++++++++++++++------
include/dt-bindings/interconnect/imx8mm.h | 50 +++++++++++++++++++++++
12 files changed, 179 insertions(+), 58 deletions(-)
create mode 100644 include/dt-bindings/interconnect/imx8mm.h
diff --git a/arch/arm/dts/imx8mm-beacon-baseboard.dtsi b/arch/arm/dts/imx8mm-beacon-baseboard.dtsi
index f338a886d8..03266bd90a 100644
--- a/arch/arm/dts/imx8mm-beacon-baseboard.dtsi
+++ b/arch/arm/dts/imx8mm-beacon-baseboard.dtsi
@@ -285,14 +285,14 @@
&usbotg1 {
vbus-supply = <®_usbotg1>;
disable-over-current;
- dr_mode="otg";
+ dr_mode = "otg";
status = "okay";
};
&usbotg2 {
pinctrl-names = "default";
disable-over-current;
- dr_mode="host";
+ dr_mode = "host";
status = "okay";
};
diff --git a/arch/arm/dts/imx8mm-evk.dtsi b/arch/arm/dts/imx8mm-evk.dtsi
index c42b966f7a..7d6317d95b 100644
--- a/arch/arm/dts/imx8mm-evk.dtsi
+++ b/arch/arm/dts/imx8mm-evk.dtsi
@@ -75,6 +75,11 @@
linux,autosuspend-period = <125>;
};
+ audio_codec_bt_sco: audio-codec-bt-sco {
+ compatible = "linux,bt-sco";
+ #sound-dai-cells = <1>;
+ };
+
wm8524: audio-codec {
#sound-dai-cells = <0>;
compatible = "wlf,wm8524";
@@ -83,6 +88,25 @@
wlf,mute-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
};
+ sound-bt-sco {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "bt-sco-audio";
+ simple-audio-card,format = "dsp_a";
+ simple-audio-card,bitclock-inversion;
+ simple-audio-card,frame-master = <&btcpu>;
+ simple-audio-card,bitclock-master = <&btcpu>;
+
+ btcpu: simple-audio-card,cpu {
+ sound-dai = <&sai2>;
+ dai-tdm-slot-num = <2>;
+ dai-tdm-slot-width = <16>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&audio_codec_bt_sco 1>;
+ };
+ };
+
sound-wm8524 {
compatible = "simple-audio-card";
simple-audio-card,name = "wm8524-audio";
@@ -346,6 +370,16 @@
status = "okay";
};
+&sai2 {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai2>;
+ assigned-clocks = <&clk IMX8MM_CLK_SAI2>;
+ assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <24576000>;
+ status = "okay";
+};
+
&sai3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai3>;
@@ -494,6 +528,15 @@
>;
};
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6
+ MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6
+ MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6
+ MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6
+ >;
+ };
+
pinctrl_sai3: sai3grp {
fsl,pins = <
MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6
diff --git a/arch/arm/dts/imx8mm-icore-mx8mm.dtsi b/arch/arm/dts/imx8mm-icore-mx8mm.dtsi
index b40148d728..def7bb5d37 100644
--- a/arch/arm/dts/imx8mm-icore-mx8mm.dtsi
+++ b/arch/arm/dts/imx8mm-icore-mx8mm.dtsi
@@ -2,7 +2,7 @@
/*
* Copyright (c) 2018 NXP
* Copyright (c) 2019 Engicam srl
- * Copyright (c) 2020 Amarula Solutons(India)
+ * Copyright (c) 2020 Amarula Solutions(India)
*/
/ {
@@ -84,42 +84,42 @@
};
reg_buck1: buck1 {
- regulator-min-microvolt = <400000>;
+ regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
reg_buck2: buck2 {
- regulator-min-microvolt = <400000>;
+ regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
reg_buck3: buck3 {
- regulator-min-microvolt = <400000>;
+ regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
reg_buck4: buck4 {
- regulator-min-microvolt = <400000>;
+ regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
reg_buck5: buck5 {
- regulator-min-microvolt = <400000>;
+ regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
reg_buck6: buck6 {
- regulator-min-microvolt = <400000>;
+ regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
diff --git a/arch/arm/dts/imx8mm-mx8menlo.dts b/arch/arm/dts/imx8mm-mx8menlo.dts
index 92eaf4ef45..32f6f2f50c 100644
--- a/arch/arm/dts/imx8mm-mx8menlo.dts
+++ b/arch/arm/dts/imx8mm-mx8menlo.dts
@@ -20,13 +20,13 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led>;
- user1 {
+ led-1 {
label = "TestLed601";
gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
};
- user2 {
+ led-2 {
label = "TestLed602";
gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
@@ -152,11 +152,11 @@
* CPLD_reset is RESET_SOFT in schematic
*/
gpio-line-names =
- "CPLD_D[1]", "CPLD_int", "CPLD_reset", "",
- "", "CPLD_D[0]", "", "",
- "", "", "", "CPLD_D[2]",
- "CPLD_D[3]", "CPLD_D[4]", "CPLD_D[5]", "CPLD_D[6]",
- "CPLD_D[7]", "", "", "",
+ "CPLD_D[6]", "CPLD_int", "CPLD_reset", "",
+ "", "CPLD_D[7]", "", "",
+ "", "", "", "CPLD_D[5]",
+ "CPLD_D[4]", "CPLD_D[3]", "CPLD_D[2]", "CPLD_D[1]",
+ "CPLD_D[0]", "", "", "",
"", "", "", "",
"", "", "", "KBD_intK",
"", "", "", "";
diff --git a/arch/arm/dts/imx8mm-u-boot.dtsi b/arch/arm/dts/imx8mm-u-boot.dtsi
index a5e30f7994..60d49bc3d7 100644
--- a/arch/arm/dts/imx8mm-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-u-boot.dtsi
@@ -9,7 +9,7 @@
};
};
-&{/soc@0} {
+&soc {
u-boot,dm-pre-reloc;
u-boot,dm-spl;
};
diff --git a/arch/arm/dts/imx8mm-venice-gw700x.dtsi b/arch/arm/dts/imx8mm-venice-gw700x.dtsi
index 00f86cada3..66a0d103c9 100644
--- a/arch/arm/dts/imx8mm-venice-gw700x.dtsi
+++ b/arch/arm/dts/imx8mm-venice-gw700x.dtsi
@@ -16,13 +16,13 @@
gpio-keys {
compatible = "gpio-keys";
- user-pb {
+ key-user-pb {
label = "user_pb";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
- user-pb1x {
+ key-user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
@@ -36,14 +36,14 @@
interrupts = <1>;
};
- eeprom-wp {
+ key-eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
interrupts = <2>;
};
- tamper {
+ key-tamper {
label = "tamper";
linux,code = <BTN_4>;
interrupt-parent = <&gsc>;
@@ -286,8 +286,8 @@
regulator-name = "buck1";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1000000>;
- regulator-min-microamp = <3800000>;
- regulator-max-microamp = <6800000>;
+ regulator-min-microamp = <3800000>;
+ regulator-max-microamp = <6800000>;
regulator-boot-on;
regulator-always-on;
};
@@ -297,8 +297,8 @@
regulator-name = "buck2";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <900000>;
- regulator-min-microamp = <2200000>;
- regulator-max-microamp = <5200000>;
+ regulator-min-microamp = <2200000>;
+ regulator-max-microamp = <5200000>;
regulator-boot-on;
regulator-always-on;
};
@@ -308,8 +308,8 @@
regulator-name = "buck3";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1000000>;
- regulator-min-microamp = <3800000>;
- regulator-max-microamp = <6800000>;
+ regulator-min-microamp = <3800000>;
+ regulator-max-microamp = <6800000>;
regulator-always-on;
};
@@ -318,8 +318,8 @@
regulator-name = "buck4";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-min-microamp = <2200000>;
- regulator-max-microamp = <5200000>;
+ regulator-min-microamp = <2200000>;
+ regulator-max-microamp = <5200000>;
regulator-boot-on;
regulator-always-on;
};
diff --git a/arch/arm/dts/imx8mm-venice-gw7901.dts b/arch/arm/dts/imx8mm-venice-gw7901.dts
index 24737e8903..d3ee6fc4ba 100644
--- a/arch/arm/dts/imx8mm-venice-gw7901.dts
+++ b/arch/arm/dts/imx8mm-venice-gw7901.dts
@@ -38,13 +38,13 @@
gpio-keys {
compatible = "gpio-keys";
- user-pb {
+ key-user-pb {
label = "user_pb";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
- user-pb1x {
+ key-user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
@@ -58,14 +58,14 @@
interrupts = <1>;
};
- eeprom-wp {
+ key-eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
interrupts = <2>;
};
- tamper {
+ key-tamper {
label = "tamper";
linux,code = <BTN_4>;
interrupt-parent = <&gsc>;
@@ -626,24 +626,28 @@
lan1: port@0 {
reg = <0>;
label = "lan1";
+ phy-mode = "internal";
local-mac-address = [00 00 00 00 00 00];
};
lan2: port@1 {
reg = <1>;
label = "lan2";
+ phy-mode = "internal";
local-mac-address = [00 00 00 00 00 00];
};
lan3: port@2 {
reg = <2>;
label = "lan3";
+ phy-mode = "internal";
local-mac-address = [00 00 00 00 00 00];
};
lan4: port@3 {
reg = <3>;
label = "lan4";
+ phy-mode = "internal";
local-mac-address = [00 00 00 00 00 00];
};
diff --git a/arch/arm/dts/imx8mm-venice-gw7902.dts b/arch/arm/dts/imx8mm-venice-gw7902.dts
index 8e8d0d34c2..31f4c735fe 100644
--- a/arch/arm/dts/imx8mm-venice-gw7902.dts
+++ b/arch/arm/dts/imx8mm-venice-gw7902.dts
@@ -42,13 +42,13 @@
gpio-keys {
compatible = "gpio-keys";
- user-pb {
+ key-user-pb {
label = "user_pb";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
- user-pb1x {
+ key-user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
@@ -62,14 +62,14 @@
interrupts = <1>;
};
- eeprom-wp {
+ key-eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
interrupts = <2>;
};
- tamper {
+ key-tamper {
label = "tamper";
linux,code = <BTN_4>;
interrupt-parent = <&gsc>;
@@ -222,7 +222,6 @@
compatible = "microchip,mcp2515";
reg = <0>;
clocks = <&can20m>;
- oscillator-frequency = <20000000>;
interrupt-parent = <&gpio2>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
spi-max-frequency = <10000000>;
@@ -651,7 +650,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>;
rts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
- cts-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+ cts-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
uart-has-rtscts;
status = "okay";
};
@@ -742,9 +741,6 @@
MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x40000041 /* M2_RESET */
MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7 0x40000119 /* M2_OFF# */
MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x40000159 /* M2_WDIS# */
- MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x40000041 /* LTE_INT */
- MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x40000041 /* LTE_RST# */
- MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x40000041 /* LTE_PWR */
MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x40000041 /* AMP GPIO1 */
MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x40000041 /* AMP GPIO2 */
MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11 0x40000041 /* AMP GPIO3 */
diff --git a/arch/arm/dts/imx8mm-venice-gw7903.dts b/arch/arm/dts/imx8mm-venice-gw7903.dts
index 1b69ac0e12..19f6d2943d 100644
--- a/arch/arm/dts/imx8mm-venice-gw7903.dts
+++ b/arch/arm/dts/imx8mm-venice-gw7903.dts
@@ -33,13 +33,13 @@
gpio-keys {
compatible = "gpio-keys";
- user-pb {
+ key-user-pb {
label = "user_pb";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
- user-pb1x {
+ key-user-pb1x {
label = "user_pb1x";
linux,code = <BTN_1>;
interrupt-parent = <&gsc>;
@@ -53,7 +53,7 @@
interrupts = <1>;
};
- eeprom-wp {
+ key-eeprom-wp {
label = "eeprom_wp";
linux,code = <BTN_3>;
interrupt-parent = <&gsc>;
diff --git a/arch/arm/dts/imx8mm-venice-gw7904.dts b/arch/arm/dts/imx8mm-venice-gw7904.dts
index 2b68fb3e43..a67771d021 100644
--- a/arch/arm/dts/imx8mm-venice-gw7904.dts
+++ b/arch/arm/dts/imx8mm-venice-gw7904.dts
@@ -617,6 +617,10 @@
status = "okay";
};
+&pgc_mipi {
+ status = "disabled";
+};
+
/* off-board RS232 */
&uart1 {
pinctrl-names = "default";
diff --git a/arch/arm/dts/imx8mm-verdin.dtsi b/arch/arm/dts/imx8mm-verdin.dtsi
index eafa88d980..bcab830c6e 100644
--- a/arch/arm/dts/imx8mm-verdin.dtsi
+++ b/arch/arm/dts/imx8mm-verdin.dtsi
@@ -32,10 +32,10 @@
};
/* Fixed clock dedicated to SPI CAN controller */
- clk20m: oscillator {
+ clk40m: oscillator {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <20000000>;
+ clock-frequency = <40000000>;
};
gpio-keys {
@@ -43,7 +43,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
- wakeup {
+ key-wakeup {
debounce-interval = <10>;
/* Verdin CTRL_WAKE1_MICO# (SODIMM 252) */
gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
@@ -53,6 +53,21 @@
};
};
+ hdmi_connector: hdmi-connector {
+ compatible = "hdmi-connector";
+ ddc-i2c-bus = <&i2c2>;
+ label = "hdmi";
+ type = "a";
+ status = "disabled";
+ };
+
+ panel_lvds: panel-lvds {
+ compatible = "panel-lvds";
+ backlight = <&backlight>;
+ data-mapping = "vesa-24";
+ status = "disabled";
+ };
+
/* Carrier Board Supplies */
reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
@@ -154,6 +169,14 @@
cpu-supply = <®_vdd_arm>;
};
+&cpu_alert0 {
+ temperature = <95000>;
+};
+
+&cpu_crit0 {
+ temperature = <105000>;
+};
+
&ddrc {
operating-points-v2 = <&ddrc_opp_table>;
@@ -194,8 +217,8 @@
can1: can@0 {
compatible = "microchip,mcp251xfd";
- clocks = <&clk20m>;
- interrupts-extended = <&gpio1 6 IRQ_TYPE_EDGE_FALLING>;
+ clocks = <&clk40m>;
+ interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can1_int>;
reg = <0>;
@@ -359,8 +382,8 @@
nxp,dvs-standby-voltage = <850000>;
regulator-always-on;
regulator-boot-on;
- regulator-max-microvolt = <950000>;
- regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-min-microvolt = <805000>;
regulator-name = "On-module +VDD_ARM (BUCK2)";
regulator-ramp-delay = <3125>;
};
@@ -368,8 +391,8 @@
reg_vdd_dram: BUCK3 {
regulator-always-on;
regulator-boot-on;
- regulator-max-microvolt = <950000>;
- regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-min-microvolt = <805000>;
regulator-name = "On-module +VDD_GPU_VPU_DDR (BUCK3)";
};
@@ -408,7 +431,7 @@
reg_vdd_snvs: LDO2 {
regulator-always-on;
regulator-boot-on;
- regulator-max-microvolt = <900000>;
+ regulator-max-microvolt = <800000>;
regulator-min-microvolt = <800000>;
regulator-name = "On-module +V0.8_SNVS (LDO2)";
};
@@ -553,8 +576,8 @@
status = "disabled";
};
- lvds_ti_sn65dsi83: bridge@2c {
- compatible = "ti,sn65dsi83";
+ lvds_ti_sn65dsi84: bridge@2c {
+ compatible = "ti,sn65dsi84";
/* Verdin GPIO_9_DSI (SN65DSI84 IRQ, SODIMM 17, unused) */
/* Verdin GPIO_10_DSI (SODIMM 21) */
enable-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
@@ -595,7 +618,7 @@
pinctrl-0 = <&pinctrl_gpio_9_dsi>, <&pinctrl_i2s_2_bclk_touch_reset>;
reg = <0x4a>;
/* Verdin I2S_2_BCLK (TOUCH_RESET#, SODIMM 42) */
- reset-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
status = "disabled";
};
@@ -737,6 +760,7 @@
};
&usbphynop2 {
+ power-domains = <&pgc_otg2>;
vcc-supply = <®_vdd_3v3>;
};
diff --git a/include/dt-bindings/interconnect/imx8mm.h b/include/dt-bindings/interconnect/imx8mm.h
new file mode 100644
index 0000000000..8f10bb06cb
--- /dev/null
+++ b/include/dt-bindings/interconnect/imx8mm.h
@@ -0,0 +1,50 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Interconnect framework driver for i.MX SoC
+ *
+ * Copyright (c) 2019, BayLibre
+ * Copyright (c) 2019-2020, NXP
+ * Author: Alexandre Bailon <abailon@baylibre.com>
+ */
+
+#ifndef __DT_BINDINGS_INTERCONNECT_IMX8MM_H
+#define __DT_BINDINGS_INTERCONNECT_IMX8MM_H
+
+#define IMX8MM_ICN_NOC 1
+#define IMX8MM_ICS_DRAM 2
+#define IMX8MM_ICS_OCRAM 3
+#define IMX8MM_ICM_A53 4
+
+#define IMX8MM_ICM_VPU_H1 5
+#define IMX8MM_ICM_VPU_G1 6
+#define IMX8MM_ICM_VPU_G2 7
+#define IMX8MM_ICN_VIDEO 8
+
+#define IMX8MM_ICM_GPU2D 9
+#define IMX8MM_ICM_GPU3D 10
+#define IMX8MM_ICN_GPU 11
+
+#define IMX8MM_ICM_CSI 12
+#define IMX8MM_ICM_LCDIF 13
+#define IMX8MM_ICN_MIPI 14
+
+#define IMX8MM_ICM_USB1 15
+#define IMX8MM_ICM_USB2 16
+#define IMX8MM_ICM_PCIE 17
+#define IMX8MM_ICN_HSIO 18
+
+#define IMX8MM_ICM_SDMA2 19
+#define IMX8MM_ICM_SDMA3 20
+#define IMX8MM_ICN_AUDIO 21
+
+#define IMX8MM_ICN_ENET 22
+#define IMX8MM_ICM_ENET 23
+
+#define IMX8MM_ICN_MAIN 24
+#define IMX8MM_ICM_NAND 25
+#define IMX8MM_ICM_SDMA1 26
+#define IMX8MM_ICM_USDHC1 27
+#define IMX8MM_ICM_USDHC2 28
+#define IMX8MM_ICM_USDHC3 29
+
+#endif /* __DT_BINDINGS_INTERCONNECT_IMX8MM_H */
--
2.35.1
^ permalink raw reply related [flat|nested] 19+ messages in thread
* Re: [PATCH v5 0/8] arm: dts: imx: sync device trees with upstream linux kernel part 1
2022-11-07 21:22 [PATCH v5 0/8] arm: dts: imx: sync device trees with upstream linux kernel part 1 Marcel Ziswiler
` (7 preceding siblings ...)
2022-11-07 21:22 ` [PATCH v5 8/8] imx8mm: " Marcel Ziswiler
@ 2022-11-07 21:29 ` Fabio Estevam
8 siblings, 0 replies; 19+ messages in thread
From: Fabio Estevam @ 2022-11-07 21:29 UTC (permalink / raw)
To: Marcel Ziswiler
Cc: u-boot, Giulio Benetti, Jesse Taube, Marcel Ziswiler,
Angus Ainslie, Ariel D'Alessandro, Marek Vasut,
NXP i.MX U-Boot Team, Stefano Babic, Teresa Remmet, Tim Harvey,
kernel
Hi Marcel,
On Mon, Nov 7, 2022 at 6:22 PM Marcel Ziswiler <marcel@ziswiler.com> wrote:
>
> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>
>
> This series synchronises them imx device trees with the upstream Linux
> kernel (v6.1-rc3). I split it into two parts. This is part 1.
>
> It also fixes a few issues as discussed during/after the pre-mature
> application of my first series [1].
>
> I am not touching kontron-sl-mx6ul as Frieder already took care of those
> [2].
>
> Feedback welcome. Thanks!
>
> [1] https://patchwork.ozlabs.org/project/uboot/cover/20220721132748.1052244-1-marcel@ziswiler.com/
> [2] https://patchwork.ozlabs.org/project/uboot/cover/20220823142917.306176-1-frieder@fris.de/
>
> Changes in v5:
> - Add Giulio's reviewed-by and tested-by. Thanks!
> - Add clock-names "per" to lpuart and re-add lcdif and usb* nodes as
> pointed out by Giulio.
> - Add Tim's tested-by. Thanks!
For the series:
Reviewed-by: Fabio Estevam <festevam@denx.de>
Thanks
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v5 3/8] imxrt1050: synchronise device tree with linux
2022-11-07 21:22 ` [PATCH v5 3/8] imxrt1050: synchronise device tree with linux Marcel Ziswiler
@ 2022-11-07 21:55 ` Giulio Benetti
2022-11-08 16:39 ` sbabic
1 sibling, 0 replies; 19+ messages in thread
From: Giulio Benetti @ 2022-11-07 21:55 UTC (permalink / raw)
To: Marcel Ziswiler, u-boot
Cc: Fabio Estevam, Jesse Taube, Marcel Ziswiler, NXP i.MX U-Boot Team,
Stefano Babic
Hi Marcel,
On 07/11/22 22:22, Marcel Ziswiler wrote:
> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>
> Synchronise device tree with linux v6.1-rc3.
>
> Note: Nowadays, the intent is for them regular device trees to just be
> synchronised from them Linux kernel device trees and any and all U-Boot
> specific changes need to go into the -u-boot.dtsi device tree include
> files which BTW get included automatically by the U-Boot build system.
>
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
and I've tested on the board and both lcd and usb works correctly so:
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Thank you for the contribution!
Best regards
--
Giulio Benetti
CEO/CTO@Benetti Engineering sas
> ---
>
> Changes in v5:
> - Add clock-names "per" to lpuart and re-add lcdif and usb* nodes as
> pointed out by Giulio.
>
> Changes in v4:
> - Use imxrt1050-evk-u-boot.dtsi as provided/tested by Jesse.
> - Explain intent in commit message as pointed out by Giulio.
> - Re-synched with v6.1-rc3.
>
> Changes in v3:
> - Incorporate feedback from Jesse.
>
> Changes in v2:
> - imxrt1050: Re-added DDR timings aka semc node as pointed out by Fabio. Thanks!
>
> arch/arm/dts/imxrt1050-evk-u-boot.dtsi | 274 ++++++++++++++++++--
> arch/arm/dts/imxrt1050-evk.dts | 257 +++---------------
> arch/arm/dts/imxrt1050-pinfunc.h | 2 +-
> arch/arm/dts/imxrt1050.dtsi | 168 +++++-------
> include/dt-bindings/clock/imxrt1050-clock.h | 9 +-
> 5 files changed, 366 insertions(+), 344 deletions(-)
>
> diff --git a/arch/arm/dts/imxrt1050-evk-u-boot.dtsi b/arch/arm/dts/imxrt1050-evk-u-boot.dtsi
> index 617cece448..e217dfd9eb 100644
> --- a/arch/arm/dts/imxrt1050-evk-u-boot.dtsi
> +++ b/arch/arm/dts/imxrt1050-evk-u-boot.dtsi
> @@ -4,9 +4,18 @@
> * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
> */
>
> +#include <dt-bindings/memory/imxrt-sdram.h>
> +#include "imxrt1050-pinfunc.h"
> +
> / {
> + aliases {
> + display0 = &lcdif;
> + usbphy0 = &usbphy1;
> + };
> +
> chosen {
> u-boot,dm-spl;
> + tick-timer = &gpt;
> };
>
> clocks {
> @@ -15,6 +24,92 @@
>
> soc {
> u-boot,dm-spl;
> +
> + usbphy1: usbphy@400d9000 {
> + compatible = "fsl,imxrt-usbphy";
> + reg = <0x400d9000 0x1000>;
> + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + usbmisc: usbmisc@402e0800 {
> + #index-cells = <1>;
> + compatible = "fsl,imxrt-usbmisc";
> + reg = <0x402e0800 0x200>;
> + clocks = <&clks IMXRT1050_CLK_USBOH3>;
> + };
> +
> + usbotg1: usb@402e0000 {
> + compatible = "fsl,imxrt-usb", "fsl,imx27-usb";
> + reg = <0x402e0000 0x200>;
> + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMXRT1050_CLK_USBOH3>;
> + fsl,usbphy = <&usbphy1>;
> + fsl,usbmisc = <&usbmisc 0>;
> + ahb-burst-config = <0x0>;
> + tx-burst-size-dword = <0x10>;
> + rx-burst-size-dword = <0x10>;
> + status = "disabled";
> + };
> +
> + lcdif: lcdif@402b8000 {
> + compatible = "fsl,imxrt-lcdif";
> + reg = <0x402b8000 0x4000>;
> + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clks IMXRT1050_CLK_LCDIF_PIX>,
> + <&clks IMXRT1050_CLK_LCDIF_APB>;
> + clock-names = "pix", "axi";
> + assigned-clocks = <&clks IMXRT1050_CLK_LCDIF_SEL>;
> + assigned-clock-parents = <&clks IMXRT1050_CLK_PLL5_VIDEO>;
> + status = "disabled";
> + };
> +
> + semc: semc@402f0000 {
> + compatible = "fsl,imxrt-semc";
> + reg = <0x402f0000 0x4000>;
> + clocks = <&clks IMXRT1050_CLK_SEMC>;
> + pinctrl-0 = <&pinctrl_semc>;
> + pinctrl-names = "default";
> + status = "okay";
> + };
> + };
> +};
> +
> +&semc {
> + u-boot,dm-spl;
> + /*
> + * Memory configuration from sdram datasheet IS42S16160J-6BLI
> + */
> + fsl,sdram-mux = /bits/ 8 <MUX_A8_SDRAM_A8
> + MUX_CSX0_SDRAM_CS1
> + 0
> + 0
> + 0
> + 0>;
> + fsl,sdram-control = /bits/ 8 <MEM_WIDTH_16BITS
> + BL_8
> + COL_9BITS
> + CL_3>;
> + fsl,sdram-timing = /bits/ 8 <0x2
> + 0x2
> + 0x9
> + 0x1
> + 0x5
> + 0x6
> +
> + 0x20
> + 0x09
> + 0x01
> + 0x00
> +
> + 0x04
> + 0x0A
> + 0x21
> + 0x50>;
> +
> + bank1: bank@0 {
> + fsl,base-address = <0x80000000>;
> + fsl,memory-size = <MEM_SIZE_32M>;
> + u-boot,dm-spl;
> };
> };
>
> @@ -31,60 +126,205 @@
> };
>
> &gpio1 {
> + compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
> u-boot,dm-spl;
> };
>
> &gpio2 {
> + compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
> u-boot,dm-spl;
> };
>
> &gpio3 {
> + compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
> u-boot,dm-spl;
> };
>
> &gpio4 {
> + compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
> u-boot,dm-spl;
> };
>
> &gpio5 {
> + compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
> u-boot,dm-spl;
> };
>
> -&gpt1 {
> +&gpt {
> + clocks = <&osc>;
> + compatible = "fsl,imxrt-gpt";
> + status = "okay";
> u-boot,dm-spl;
> };
>
> &lpuart1 { /* console */
> + compatible = "fsl,imxrt-lpuart";
> + clock-names = "per";
> u-boot,dm-spl;
> };
>
> -&semc {
> +&iomuxc {
> u-boot,dm-spl;
> + compatible = "fsl,imxrt-iomuxc";
> + pinctrl-0 = <&pinctrl_lpuart1>;
>
> - bank1: bank@0 {
> + pinctrl_semc: semcgrp {
> + fsl,pins = <
> + MXRT1050_IOMUXC_GPIO_EMC_00_SEMC_DA00
> + 0xf1 /* SEMC_D0 */
> + MXRT1050_IOMUXC_GPIO_EMC_01_SEMC_DA01
> + 0xf1 /* SEMC_D1 */
> + MXRT1050_IOMUXC_GPIO_EMC_02_SEMC_DA02
> + 0xf1 /* SEMC_D2 */
> + MXRT1050_IOMUXC_GPIO_EMC_03_SEMC_DA03
> + 0xf1 /* SEMC_D3 */
> + MXRT1050_IOMUXC_GPIO_EMC_04_SEMC_DA04
> + 0xf1 /* SEMC_D4 */
> + MXRT1050_IOMUXC_GPIO_EMC_05_SEMC_DA05
> + 0xf1 /* SEMC_D5 */
> + MXRT1050_IOMUXC_GPIO_EMC_06_SEMC_DA06
> + 0xf1 /* SEMC_D6 */
> + MXRT1050_IOMUXC_GPIO_EMC_07_SEMC_DA07
> + 0xf1 /* SEMC_D7 */
> + MXRT1050_IOMUXC_GPIO_EMC_08_SEMC_DM00
> + 0xf1 /* SEMC_DM0 */
> + MXRT1050_IOMUXC_GPIO_EMC_09_SEMC_ADDR00
> + 0xf1 /* SEMC_A0 */
> + MXRT1050_IOMUXC_GPIO_EMC_10_SEMC_ADDR01
> + 0xf1 /* SEMC_A1 */
> + MXRT1050_IOMUXC_GPIO_EMC_11_SEMC_ADDR02
> + 0xf1 /* SEMC_A2 */
> + MXRT1050_IOMUXC_GPIO_EMC_12_SEMC_ADDR03
> + 0xf1 /* SEMC_A3 */
> + MXRT1050_IOMUXC_GPIO_EMC_13_SEMC_ADDR04
> + 0xf1 /* SEMC_A4 */
> + MXRT1050_IOMUXC_GPIO_EMC_14_SEMC_ADDR05
> + 0xf1 /* SEMC_A5 */
> + MXRT1050_IOMUXC_GPIO_EMC_15_SEMC_ADDR06
> + 0xf1 /* SEMC_A6 */
> + MXRT1050_IOMUXC_GPIO_EMC_16_SEMC_ADDR07
> + 0xf1 /* SEMC_A7 */
> + MXRT1050_IOMUXC_GPIO_EMC_17_SEMC_ADDR08
> + 0xf1 /* SEMC_A8 */
> + MXRT1050_IOMUXC_GPIO_EMC_18_SEMC_ADDR09
> + 0xf1 /* SEMC_A9 */
> + MXRT1050_IOMUXC_GPIO_EMC_19_SEMC_ADDR11
> + 0xf1 /* SEMC_A11 */
> + MXRT1050_IOMUXC_GPIO_EMC_20_SEMC_ADDR12
> + 0xf1 /* SEMC_A12 */
> + MXRT1050_IOMUXC_GPIO_EMC_21_SEMC_BA0
> + 0xf1 /* SEMC_BA0 */
> + MXRT1050_IOMUXC_GPIO_EMC_22_SEMC_BA1
> + 0xf1 /* SEMC_BA1 */
> + MXRT1050_IOMUXC_GPIO_EMC_23_SEMC_ADDR10
> + 0xf1 /* SEMC_A10 */
> + MXRT1050_IOMUXC_GPIO_EMC_24_SEMC_CAS
> + 0xf1 /* SEMC_CAS */
> + MXRT1050_IOMUXC_GPIO_EMC_25_SEMC_RAS
> + 0xf1 /* SEMC_RAS */
> + MXRT1050_IOMUXC_GPIO_EMC_26_SEMC_CLK
> + 0xf1 /* SEMC_CLK */
> + MXRT1050_IOMUXC_GPIO_EMC_27_SEMC_CKE
> + 0xf1 /* SEMC_CKE */
> + MXRT1050_IOMUXC_GPIO_EMC_28_SEMC_WE
> + 0xf1 /* SEMC_WE */
> + MXRT1050_IOMUXC_GPIO_EMC_29_SEMC_CS0
> + 0xf1 /* SEMC_CS0 */
> + MXRT1050_IOMUXC_GPIO_EMC_30_SEMC_DA08
> + 0xf1 /* SEMC_D8 */
> + MXRT1050_IOMUXC_GPIO_EMC_31_SEMC_DA09
> + 0xf1 /* SEMC_D9 */
> + MXRT1050_IOMUXC_GPIO_EMC_32_SEMC_DA10
> + 0xf1 /* SEMC_D10 */
> + MXRT1050_IOMUXC_GPIO_EMC_33_SEMC_DA11
> + 0xf1 /* SEMC_D11 */
> + MXRT1050_IOMUXC_GPIO_EMC_34_SEMC_DA12
> + 0xf1 /* SEMC_D12 */
> + MXRT1050_IOMUXC_GPIO_EMC_35_SEMC_DA13
> + 0xf1 /* SEMC_D13 */
> + MXRT1050_IOMUXC_GPIO_EMC_36_SEMC_DA14
> + 0xf1 /* SEMC_D14 */
> + MXRT1050_IOMUXC_GPIO_EMC_37_SEMC_DA15
> + 0xf1 /* SEMC_D15 */
> + MXRT1050_IOMUXC_GPIO_EMC_38_SEMC_DM01
> + 0xf1 /* SEMC_DM1 */
> + MXRT1050_IOMUXC_GPIO_EMC_39_SEMC_DQS
> + (IMX_PAD_SION | 0xf1) /* SEMC_DQS */
> + >;
> u-boot,dm-spl;
> };
> -};
>
> -&iomuxc {
> - u-boot,dm-spl;
> + pinctrl_lcdif: lcdifgrp {
> + fsl,pins = <
> + MXRT1050_IOMUXC_GPIO_B0_00_LCD_CLK 0x1b0b1
> + MXRT1050_IOMUXC_GPIO_B0_01_LCD_ENABLE 0x1b0b1
> + MXRT1050_IOMUXC_GPIO_B0_02_LCD_HSYNC 0x1b0b1
> + MXRT1050_IOMUXC_GPIO_B0_03_LCD_VSYNC 0x1b0b1
> + MXRT1050_IOMUXC_GPIO_B0_04_LCD_DATA00 0x1b0b1
> + MXRT1050_IOMUXC_GPIO_B0_05_LCD_DATA01 0x1b0b1
> + MXRT1050_IOMUXC_GPIO_B0_06_LCD_DATA02 0x1b0b1
> + MXRT1050_IOMUXC_GPIO_B0_07_LCD_DATA03 0x1b0b1
> + MXRT1050_IOMUXC_GPIO_B0_08_LCD_DATA04 0x1b0b1
> + MXRT1050_IOMUXC_GPIO_B0_09_LCD_DATA05 0x1b0b1
> + MXRT1050_IOMUXC_GPIO_B0_10_LCD_DATA06 0x1b0b1
> + MXRT1050_IOMUXC_GPIO_B0_11_LCD_DATA07 0x1b0b1
> + MXRT1050_IOMUXC_GPIO_B0_12_LCD_DATA08 0x1b0b1
> + MXRT1050_IOMUXC_GPIO_B0_13_LCD_DATA09 0x1b0b1
> + MXRT1050_IOMUXC_GPIO_B0_14_LCD_DATA10 0x1b0b1
> + MXRT1050_IOMUXC_GPIO_B0_15_LCD_DATA11 0x1b0b1
> + MXRT1050_IOMUXC_GPIO_B1_01_LCD_DATA13 0x1b0b1
> + MXRT1050_IOMUXC_GPIO_B1_02_LCD_DATA14 0x1b0b1
> + MXRT1050_IOMUXC_GPIO_B1_03_LCD_DATA15 0x1b0b1
> + MXRT1050_IOMUXC_GPIO_B1_15_GPIO2_IO31 0x0b069
> + MXRT1050_IOMUXC_GPIO_AD_B0_02_GPIO1_IO02 0x0b069
> + >;
> + };
>
> - imxrt1050-evk {
> + pinctrl_lpuart1: lpuart1grp {
> u-boot,dm-spl;
> - pinctrl_lpuart1: lpuart1grp {
> - u-boot,dm-spl;
> - };
> + };
>
> - pinctrl_semc: semcgrp {
> - u-boot,dm-spl;
> - };
> + pinctrl_usdhc0: usdhc0grp {
> + u-boot,dm-spl;
> + };
> + };
> +
> +&usdhc1 {
> + compatible = "fsl,imxrt-usdhc";
> + u-boot,dm-spl;
> +};
> +
> +&lcdif {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_lcdif>;
> + display = <&display0>;
> + status = "okay";
> +
> + display0: display0 {
> + bits-per-pixel = <16>;
> + bus-width = <16>;
>
> - pinctrl_usdhc0: usdhc0grp {
> - u-boot,dm-spl;
> + display-timings {
> + timing0: timing0 {
> + clock-frequency = <9300000>;
> + hactive = <480>;
> + vactive = <272>;
> + hback-porch = <4>;
> + hfront-porch = <8>;
> + vback-porch = <4>;
> + vfront-porch = <8>;
> + hsync-len = <41>;
> + vsync-len = <10>;
> + de-active = <1>;
> + pixelclk-active = <0>;
> + hsync-active = <0>;
> + vsync-active = <0>;
> + };
> };
> };
> };
>
> -&usdhc1 {
> - u-boot,dm-spl;
> +&usbotg1 {
> + dr_mode = "host";
> + status = "okay";
> };
> diff --git a/arch/arm/dts/imxrt1050-evk.dts b/arch/arm/dts/imxrt1050-evk.dts
> index fb2da3adfc..6a9c10decf 100644
> --- a/arch/arm/dts/imxrt1050-evk.dts
> +++ b/arch/arm/dts/imxrt1050-evk.dts
> @@ -1,4 +1,4 @@
> -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> /*
> * Copyright (C) 2019
> * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
> @@ -6,7 +6,6 @@
>
> /dts-v1/;
> #include "imxrt1050.dtsi"
> -#include "imxrt1050-evk-u-boot.dtsi"
> #include "imxrt1050-pinfunc.h"
>
> / {
> @@ -14,210 +13,52 @@
> compatible = "fsl,imxrt1050-evk", "fsl,imxrt1050";
>
> chosen {
> - bootargs = "root=/dev/ram";
> - stdout-path = "serial0:115200n8";
> - tick-timer = &gpt1;
> + stdout-path = &lpuart1;
> };
>
> - memory {
> + aliases {
> + gpio0 = &gpio1;
> + gpio1 = &gpio2;
> + gpio2 = &gpio3;
> + gpio3 = &gpio4;
> + gpio4 = &gpio5;
> + mmc0 = &usdhc1;
> + serial0 = &lpuart1;
> + };
> +
> + memory@80000000 {
> device_type = "memory";
> reg = <0x80000000 0x2000000>;
> };
> };
>
> -&lpuart1 { /* console */
> +&lpuart1 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_lpuart1>;
> status = "okay";
> };
>
> -&semc {
> - /*
> - * Memory configuration from sdram datasheet IS42S16160J-6BLI
> - */
> - fsl,sdram-mux = /bits/ 8 <MUX_A8_SDRAM_A8
> - MUX_CSX0_SDRAM_CS1
> - 0
> - 0
> - 0
> - 0>;
> - fsl,sdram-control = /bits/ 8 <MEM_WIDTH_16BITS
> - BL_8
> - COL_9BITS
> - CL_3>;
> - fsl,sdram-timing = /bits/ 8 <0x2
> - 0x2
> - 0x9
> - 0x1
> - 0x5
> - 0x6
> -
> - 0x20
> - 0x09
> - 0x01
> - 0x00
> -
> - 0x04
> - 0x0A
> - 0x21
> - 0x50>;
> -
> - bank1: bank@0 {
> - fsl,base-address = <0x80000000>;
> - fsl,memory-size = <MEM_SIZE_32M>;
> - };
> -};
> -
> &iomuxc {
> pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_lpuart1>;
> -
> - imxrt1050-evk {
> - pinctrl_lpuart1: lpuart1grp {
> - fsl,pins = <
> - MXRT1050_IOMUXC_GPIO_AD_B0_12_LPUART1_TXD
> - 0xf1
> - MXRT1050_IOMUXC_GPIO_AD_B0_13_LPUART1_RXD
> - 0xf1
> - >;
> - };
> -
> - pinctrl_semc: semcgrp {
> - fsl,pins = <
> - MXRT1050_IOMUXC_GPIO_EMC_00_SEMC_DA00
> - 0xf1 /* SEMC_D0 */
> - MXRT1050_IOMUXC_GPIO_EMC_01_SEMC_DA01
> - 0xf1 /* SEMC_D1 */
> - MXRT1050_IOMUXC_GPIO_EMC_02_SEMC_DA02
> - 0xf1 /* SEMC_D2 */
> - MXRT1050_IOMUXC_GPIO_EMC_03_SEMC_DA03
> - 0xf1 /* SEMC_D3 */
> - MXRT1050_IOMUXC_GPIO_EMC_04_SEMC_DA04
> - 0xf1 /* SEMC_D4 */
> - MXRT1050_IOMUXC_GPIO_EMC_05_SEMC_DA05
> - 0xf1 /* SEMC_D5 */
> - MXRT1050_IOMUXC_GPIO_EMC_06_SEMC_DA06
> - 0xf1 /* SEMC_D6 */
> - MXRT1050_IOMUXC_GPIO_EMC_07_SEMC_DA07
> - 0xf1 /* SEMC_D7 */
> - MXRT1050_IOMUXC_GPIO_EMC_08_SEMC_DM00
> - 0xf1 /* SEMC_DM0 */
> - MXRT1050_IOMUXC_GPIO_EMC_09_SEMC_ADDR00
> - 0xf1 /* SEMC_A0 */
> - MXRT1050_IOMUXC_GPIO_EMC_10_SEMC_ADDR01
> - 0xf1 /* SEMC_A1 */
> - MXRT1050_IOMUXC_GPIO_EMC_11_SEMC_ADDR02
> - 0xf1 /* SEMC_A2 */
> - MXRT1050_IOMUXC_GPIO_EMC_12_SEMC_ADDR03
> - 0xf1 /* SEMC_A3 */
> - MXRT1050_IOMUXC_GPIO_EMC_13_SEMC_ADDR04
> - 0xf1 /* SEMC_A4 */
> - MXRT1050_IOMUXC_GPIO_EMC_14_SEMC_ADDR05
> - 0xf1 /* SEMC_A5 */
> - MXRT1050_IOMUXC_GPIO_EMC_15_SEMC_ADDR06
> - 0xf1 /* SEMC_A6 */
> - MXRT1050_IOMUXC_GPIO_EMC_16_SEMC_ADDR07
> - 0xf1 /* SEMC_A7 */
> - MXRT1050_IOMUXC_GPIO_EMC_17_SEMC_ADDR08
> - 0xf1 /* SEMC_A8 */
> - MXRT1050_IOMUXC_GPIO_EMC_18_SEMC_ADDR09
> - 0xf1 /* SEMC_A9 */
> - MXRT1050_IOMUXC_GPIO_EMC_19_SEMC_ADDR11
> - 0xf1 /* SEMC_A11 */
> - MXRT1050_IOMUXC_GPIO_EMC_20_SEMC_ADDR12
> - 0xf1 /* SEMC_A12 */
> - MXRT1050_IOMUXC_GPIO_EMC_21_SEMC_BA0
> - 0xf1 /* SEMC_BA0 */
> - MXRT1050_IOMUXC_GPIO_EMC_22_SEMC_BA1
> - 0xf1 /* SEMC_BA1 */
> - MXRT1050_IOMUXC_GPIO_EMC_23_SEMC_ADDR10
> - 0xf1 /* SEMC_A10 */
> - MXRT1050_IOMUXC_GPIO_EMC_24_SEMC_CAS
> - 0xf1 /* SEMC_CAS */
> - MXRT1050_IOMUXC_GPIO_EMC_25_SEMC_RAS
> - 0xf1 /* SEMC_RAS */
> - MXRT1050_IOMUXC_GPIO_EMC_26_SEMC_CLK
> - 0xf1 /* SEMC_CLK */
> - MXRT1050_IOMUXC_GPIO_EMC_27_SEMC_CKE
> - 0xf1 /* SEMC_CKE */
> - MXRT1050_IOMUXC_GPIO_EMC_28_SEMC_WE
> - 0xf1 /* SEMC_WE */
> - MXRT1050_IOMUXC_GPIO_EMC_29_SEMC_CS0
> - 0xf1 /* SEMC_CS0 */
> - MXRT1050_IOMUXC_GPIO_EMC_30_SEMC_DA08
> - 0xf1 /* SEMC_D8 */
> - MXRT1050_IOMUXC_GPIO_EMC_31_SEMC_DA09
> - 0xf1 /* SEMC_D9 */
> - MXRT1050_IOMUXC_GPIO_EMC_32_SEMC_DA10
> - 0xf1 /* SEMC_D10 */
> - MXRT1050_IOMUXC_GPIO_EMC_33_SEMC_DA11
> - 0xf1 /* SEMC_D11 */
> - MXRT1050_IOMUXC_GPIO_EMC_34_SEMC_DA12
> - 0xf1 /* SEMC_D12 */
> - MXRT1050_IOMUXC_GPIO_EMC_35_SEMC_DA13
> - 0xf1 /* SEMC_D13 */
> - MXRT1050_IOMUXC_GPIO_EMC_36_SEMC_DA14
> - 0xf1 /* SEMC_D14 */
> - MXRT1050_IOMUXC_GPIO_EMC_37_SEMC_DA15
> - 0xf1 /* SEMC_D15 */
> - MXRT1050_IOMUXC_GPIO_EMC_38_SEMC_DM01
> - 0xf1 /* SEMC_DM1 */
> - MXRT1050_IOMUXC_GPIO_EMC_39_SEMC_DQS
> - (IMX_PAD_SION | 0xf1) /* SEMC_DQS */
> - >;
> - };
> -
> - pinctrl_usdhc0: usdhc0grp {
> - fsl,pins = <
> - MXRT1050_IOMUXC_GPIO_B1_12_USDHC1_CD_B
> - 0x1B000
> - MXRT1050_IOMUXC_GPIO_B1_14_USDHC1_VSELECT
> - 0xB069
> - MXRT1050_IOMUXC_GPIO_SD_B0_00_USDHC1_CMD
> - 0x17061
> - MXRT1050_IOMUXC_GPIO_SD_B0_01_USDHC1_CLK
> - 0x17061
> - MXRT1050_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3
> - 0x17061
> - MXRT1050_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2
> - 0x17061
> - MXRT1050_IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1
> - 0x17061
> - MXRT1050_IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0
> - 0x17061
> - >;
> - };
> -
> - pinctrl_lcdif: lcdifgrp {
> - fsl,pins = <
> - MXRT1050_IOMUXC_GPIO_B0_00_LCD_CLK 0x1b0b1
> - MXRT1050_IOMUXC_GPIO_B0_01_LCD_ENABLE 0x1b0b1
> - MXRT1050_IOMUXC_GPIO_B0_02_LCD_HSYNC 0x1b0b1
> - MXRT1050_IOMUXC_GPIO_B0_03_LCD_VSYNC 0x1b0b1
> - MXRT1050_IOMUXC_GPIO_B0_04_LCD_DATA00 0x1b0b1
> - MXRT1050_IOMUXC_GPIO_B0_05_LCD_DATA01 0x1b0b1
> - MXRT1050_IOMUXC_GPIO_B0_06_LCD_DATA02 0x1b0b1
> - MXRT1050_IOMUXC_GPIO_B0_07_LCD_DATA03 0x1b0b1
> - MXRT1050_IOMUXC_GPIO_B0_08_LCD_DATA04 0x1b0b1
> - MXRT1050_IOMUXC_GPIO_B0_09_LCD_DATA05 0x1b0b1
> - MXRT1050_IOMUXC_GPIO_B0_10_LCD_DATA06 0x1b0b1
> - MXRT1050_IOMUXC_GPIO_B0_11_LCD_DATA07 0x1b0b1
> - MXRT1050_IOMUXC_GPIO_B0_12_LCD_DATA08 0x1b0b1
> - MXRT1050_IOMUXC_GPIO_B0_13_LCD_DATA09 0x1b0b1
> - MXRT1050_IOMUXC_GPIO_B0_14_LCD_DATA10 0x1b0b1
> - MXRT1050_IOMUXC_GPIO_B0_15_LCD_DATA11 0x1b0b1
> - MXRT1050_IOMUXC_GPIO_B1_01_LCD_DATA13 0x1b0b1
> - MXRT1050_IOMUXC_GPIO_B1_02_LCD_DATA14 0x1b0b1
> - MXRT1050_IOMUXC_GPIO_B1_03_LCD_DATA15 0x1b0b1
> - MXRT1050_IOMUXC_GPIO_B1_15_GPIO2_IO31 0x0b069
> - MXRT1050_IOMUXC_GPIO_AD_B0_02_GPIO1_IO02 0x0b069
> - >;
> - };
> + pinctrl_lpuart1: lpuart1grp {
> + fsl,pins = <
> + MXRT1050_IOMUXC_GPIO_AD_B0_12_LPUART1_TXD 0xf1
> + MXRT1050_IOMUXC_GPIO_AD_B0_13_LPUART1_RXD 0xf1
> + >;
> };
> -};
>
> -&gpt1 {
> - status = "okay";
> + pinctrl_usdhc0: usdhc0grp {
> + fsl,pins = <
> + MXRT1050_IOMUXC_GPIO_B1_12_USDHC1_CD_B 0x1B000
> + MXRT1050_IOMUXC_GPIO_B1_14_USDHC1_VSELECT 0xB069
> + MXRT1050_IOMUXC_GPIO_SD_B0_00_USDHC1_CMD 0x17061
> + MXRT1050_IOMUXC_GPIO_SD_B0_01_USDHC1_CLK 0x17061
> + MXRT1050_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3 0x17061
> + MXRT1050_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2 0x17061
> + MXRT1050_IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1 0x17061
> + MXRT1050_IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0 0x17061
> + >;
> + };
> };
>
> &usdhc1 {
> @@ -226,42 +67,6 @@
> pinctrl-1 = <&pinctrl_usdhc0>;
> pinctrl-2 = <&pinctrl_usdhc0>;
> pinctrl-3 = <&pinctrl_usdhc0>;
> - status = "okay";
> -
> cd-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
> -};
> -
> -&lcdif {
> - pinctrl-names = "default";
> - pinctrl-0 = <&pinctrl_lcdif>;
> - display = <&display0>;
> - status = "okay";
> -
> - display0: display0 {
> - bits-per-pixel = <16>;
> - bus-width = <16>;
> -
> - display-timings {
> - timing0: timing0 {
> - clock-frequency = <9300000>;
> - hactive = <480>;
> - vactive = <272>;
> - hback-porch = <4>;
> - hfront-porch = <8>;
> - vback-porch = <4>;
> - vfront-porch = <8>;
> - hsync-len = <41>;
> - vsync-len = <10>;
> - de-active = <1>;
> - pixelclk-active = <0>;
> - hsync-active = <0>;
> - vsync-active = <0>;
> - };
> - };
> - };
> -};
> -
> -&usbotg1 {
> - dr_mode = "host";
> status = "okay";
> };
> diff --git a/arch/arm/dts/imxrt1050-pinfunc.h b/arch/arm/dts/imxrt1050-pinfunc.h
> index a29031ab3d..22c14a3262 100644
> --- a/arch/arm/dts/imxrt1050-pinfunc.h
> +++ b/arch/arm/dts/imxrt1050-pinfunc.h
> @@ -1,4 +1,4 @@
> -/* SPDX-License-Identifier: GPL-2.0+ */
> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
> /*
> * Copyright (C) 2019
> * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
> diff --git a/arch/arm/dts/imxrt1050.dtsi b/arch/arm/dts/imxrt1050.dtsi
> index 09f4712af6..03e6a858a7 100644
> --- a/arch/arm/dts/imxrt1050.dtsi
> +++ b/arch/arm/dts/imxrt1050.dtsi
> @@ -1,4 +1,4 @@
> -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> /*
> * Copyright (C) 2019
> * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
> @@ -8,53 +8,37 @@
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> #include <dt-bindings/clock/imxrt1050-clock.h>
> #include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/memory/imxrt-sdram.h>
>
> / {
> #address-cells = <1>;
> #size-cells = <1>;
>
> - aliases {
> - display0 = &lcdif;
> - gpio0 = &gpio1;
> - gpio1 = &gpio2;
> - gpio2 = &gpio3;
> - gpio3 = &gpio4;
> - gpio4 = &gpio5;
> - mmc0 = &usdhc1;
> - serial0 = &lpuart1;
> - usbphy0 = &usbphy1;
> - };
> -
> clocks {
> osc: osc {
> - compatible = "fsl,imx-osc", "fixed-clock";
> + compatible = "fixed-clock";
> #clock-cells = <0>;
> clock-frequency = <24000000>;
> };
> - };
>
> - soc {
> - semc: semc@402f0000 {
> - compatible = "fsl,imxrt-semc";
> - reg = <0x402f0000 0x4000>;
> - clocks = <&clks IMXRT1050_CLK_SEMC>;
> - pinctrl-0 = <&pinctrl_semc>;
> - pinctrl-names = "default";
> - status = "okay";
> + osc3M: osc3M {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <3000000>;
> };
> + };
>
> + soc {
> lpuart1: serial@40184000 {
> - compatible = "fsl,imxrt-lpuart";
> + compatible = "fsl,imxrt1050-lpuart", "fsl,imx7ulp-lpuart";
> reg = <0x40184000 0x4000>;
> - interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <20>;
> clocks = <&clks IMXRT1050_CLK_LPUART1>;
> - clock-names = "per";
> + clock-names = "ipg";
> status = "disabled";
> };
>
> - iomuxc: iomuxc@401f8000 {
> - compatible = "fsl,imxrt-iomuxc";
> + iomuxc: pinctrl@401f8000 {
> + compatible = "fsl,imxrt1050-iomuxc";
> reg = <0x401f8000 0x4000>;
> fsl,mux_mask = <0x7>;
> };
> @@ -64,31 +48,61 @@
> reg = <0x400d8000 0x4000>;
> };
>
> - clks: ccm@400fc000 {
> + clks: clock-controller@400fc000 {
> compatible = "fsl,imxrt1050-ccm";
> reg = <0x400fc000 0x4000>;
> - interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <95>, <96>;
> + clocks = <&osc>;
> + clock-names = "osc";
> #clock-cells = <1>;
> - };
> -
> - usdhc1: usdhc@402c0000 {
> - compatible = "fsl,imxrt-usdhc";
> - reg = <0x402c0000 0x10000>;
> - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMXRT1050_CLK_USDHC1>;
> - clock-names = "per";
> + assigned-clocks = <&clks IMXRT1050_CLK_PLL1_BYPASS>,
> + <&clks IMXRT1050_CLK_PLL1_BYPASS>,
> + <&clks IMXRT1050_CLK_PLL2_BYPASS>,
> + <&clks IMXRT1050_CLK_PLL3_BYPASS>,
> + <&clks IMXRT1050_CLK_PLL3_PFD1_664_62M>,
> + <&clks IMXRT1050_CLK_PLL2_PFD2_396M>;
> + assigned-clock-parents = <&clks IMXRT1050_CLK_PLL1_REF_SEL>,
> + <&clks IMXRT1050_CLK_PLL1_ARM>,
> + <&clks IMXRT1050_CLK_PLL2_SYS>,
> + <&clks IMXRT1050_CLK_PLL3_USB_OTG>,
> + <&clks IMXRT1050_CLK_PLL3_USB_OTG>,
> + <&clks IMXRT1050_CLK_PLL2_SYS>;
> + };
> +
> + edma1: dma-controller@400e8000 {
> + #dma-cells = <2>;
> + compatible = "fsl,imx7ulp-edma";
> + reg = <0x400e8000 0x4000>,
> + <0x400ec000 0x4000>;
> + dma-channels = <32>;
> + interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>, <8>,
> + <9>, <10>, <11>, <12>, <13>, <14>, <15>, <16>;
> + clock-names = "dma", "dmamux0";
> + clocks = <&clks IMXRT1050_CLK_DMA>,
> + <&clks IMXRT1050_CLK_DMA_MUX>;
> + };
> +
> + usdhc1: mmc@402c0000 {
> + compatible = "fsl,imxrt1050-usdhc", "fsl,imx6sl-usdhc";
> + reg = <0x402c0000 0x4000>;
> + interrupts = <110>;
> + clocks = <&clks IMXRT1050_CLK_IPG_PDOF>,
> + <&clks IMXRT1050_CLK_OSC>,
> + <&clks IMXRT1050_CLK_USDHC1>;
> + clock-names = "ipg", "ahb", "per";
> bus-width = <4>;
> + fsl,wp-controller;
> + no-1-8-v;
> + max-frequency = <4000000>;
> fsl,tuning-start-tap = <20>;
> - fsl,tuning-step= <2>;
> + fsl,tuning-step = <2>;
> status = "disabled";
> };
>
> gpio1: gpio@401b8000 {
> - compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
> + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
> reg = <0x401b8000 0x4000>;
> - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <80>, <81>;
> gpio-controller;
> #gpio-cells = <2>;
> interrupt-controller;
> @@ -96,10 +110,9 @@
> };
>
> gpio2: gpio@401bc000 {
> - compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
> + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
> reg = <0x401bc000 0x4000>;
> - interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <82>, <83>;
> gpio-controller;
> #gpio-cells = <2>;
> interrupt-controller;
> @@ -107,10 +120,9 @@
> };
>
> gpio3: gpio@401c0000 {
> - compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
> + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
> reg = <0x401c0000 0x4000>;
> - interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <84>, <85>;
> gpio-controller;
> #gpio-cells = <2>;
> interrupt-controller;
> @@ -118,10 +130,9 @@
> };
>
> gpio4: gpio@401c4000 {
> - compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
> + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
> reg = <0x401c4000 0x4000>;
> - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <86>, <87>;
> gpio-controller;
> #gpio-cells = <2>;
> interrupt-controller;
> @@ -129,60 +140,21 @@
> };
>
> gpio5: gpio@400c0000 {
> - compatible = "fsl,imxrt-gpio", "fsl,imx35-gpio";
> + compatible = "fsl,imxrt1050-gpio", "fsl,imx35-gpio";
> reg = <0x400c0000 0x4000>;
> - interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <88>, <89>;
> gpio-controller;
> #gpio-cells = <2>;
> interrupt-controller;
> #interrupt-cells = <2>;
> };
>
> - lcdif: lcdif@402b8000 {
> - compatible = "fsl,imxrt-lcdif";
> - reg = <0x402b8000 0x4000>;
> - interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMXRT1050_CLK_LCDIF_PIX>,
> - <&clks IMXRT1050_CLK_LCDIF_APB>;
> - clock-names = "pix", "axi";
> - assigned-clocks = <&clks IMXRT1050_CLK_LCDIF_SEL>;
> - assigned-clock-parents = <&clks IMXRT1050_CLK_PLL5_VIDEO>;
> - status = "disabled";
> - };
> -
> - gpt1: gpt1@401ec000 {
> - compatible = "fsl,imxrt-gpt";
> + gpt: timer@401ec000 {
> + compatible = "fsl,imxrt1050-gpt", "fsl,imx6dl-gpt", "fsl,imx6sl-gpt";
> reg = <0x401ec000 0x4000>;
> interrupts = <100>;
> - clocks = <&osc>;
> - status = "disabled";
> - };
> -
> - usbphy1: usbphy@400d9000 {
> - compatible = "fsl,imxrt-usbphy";
> - reg = <0x400d9000 0x1000>;
> - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
> - };
> -
> - usbmisc: usbmisc@402e0800 {
> - #index-cells = <1>;
> - compatible = "fsl,imxrt-usbmisc";
> - reg = <0x402e0800 0x200>;
> - clocks = <&clks IMXRT1050_CLK_USBOH3>;
> - };
> -
> - usbotg1: usb@402e0000 {
> - compatible = "fsl,imxrt-usb", "fsl,imx27-usb";
> - reg = <0x402e0000 0x200>;
> - interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clks IMXRT1050_CLK_USBOH3>;
> - fsl,usbphy = <&usbphy1>;
> - fsl,usbmisc = <&usbmisc 0>;
> - ahb-burst-config = <0x0>;
> - tx-burst-size-dword = <0x10>;
> - rx-burst-size-dword = <0x10>;
> - status = "disabled";
> + clocks = <&osc3M>;
> + clock-names = "per";
> };
> };
> };
> diff --git a/include/dt-bindings/clock/imxrt1050-clock.h b/include/dt-bindings/clock/imxrt1050-clock.h
> index f74dbbcf93..93bef0832d 100644
> --- a/include/dt-bindings/clock/imxrt1050-clock.h
> +++ b/include/dt-bindings/clock/imxrt1050-clock.h
> @@ -1,4 +1,4 @@
> -/* SPDX-License-Identifier: GPL-2.0+ */
> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
> /*
> * Copyright(C) 2019
> * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
> @@ -62,6 +62,11 @@
> #define IMXRT1050_CLK_PLL7_USB_HOST 53
> #define IMXRT1050_CLK_LCDIF_PIX 54
> #define IMXRT1050_CLK_USBOH3 55
> -#define IMXRT1050_CLK_END 56
> +#define IMXRT1050_CLK_IPG_PDOF 56
> +#define IMXRT1050_CLK_PER_CLK_SEL 57
> +#define IMXRT1050_CLK_PER_PDOF 58
> +#define IMXRT1050_CLK_DMA 59
> +#define IMXRT1050_CLK_DMA_MUX 60
> +#define IMXRT1050_CLK_END 61
>
> #endif /* __DT_BINDINGS_CLOCK_IMXRT1050_H */
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH v5 7/8] imx8mn: synchronise device tree with linux
2022-11-07 21:22 ` [PATCH v5 7/8] imx8mn: " Marcel Ziswiler
@ 2022-11-08 16:37 ` sbabic
0 siblings, 0 replies; 19+ messages in thread
From: sbabic @ 2022-11-08 16:37 UTC (permalink / raw)
To: Marcel Ziswiler, u-boot
> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Synchronise device tree with linux v6.1-rc3.
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Tested-By: Tim Harvey <tharvey@gateworks.com> #imx8m{m,n,p}-venice-*
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH v5 5/8] imx8mq: synchronise device tree with linux
2022-11-07 21:22 ` [PATCH v5 5/8] imx8mq: " Marcel Ziswiler
@ 2022-11-08 16:38 ` sbabic
0 siblings, 0 replies; 19+ messages in thread
From: sbabic @ 2022-11-08 16:38 UTC (permalink / raw)
To: Marcel Ziswiler, u-boot
> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Synchronise device tree with linux v6.1-rc3.
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH v5 6/8] imx8mp: synchronise device tree with linux
2022-11-07 21:22 ` [PATCH v5 6/8] imx8mp: " Marcel Ziswiler
@ 2022-11-08 16:38 ` sbabic
0 siblings, 0 replies; 19+ messages in thread
From: sbabic @ 2022-11-08 16:38 UTC (permalink / raw)
To: Marcel Ziswiler, u-boot
> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Synchronise device tree with linux v6.1-rc3.
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Tested-By: Tim Harvey <tharvey@gateworks.com> #imx8m{m,n,p}-venice-*
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH v5 3/8] imxrt1050: synchronise device tree with linux
2022-11-07 21:22 ` [PATCH v5 3/8] imxrt1050: synchronise device tree with linux Marcel Ziswiler
2022-11-07 21:55 ` Giulio Benetti
@ 2022-11-08 16:39 ` sbabic
1 sibling, 0 replies; 19+ messages in thread
From: sbabic @ 2022-11-08 16:39 UTC (permalink / raw)
To: Marcel Ziswiler, u-boot
> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Synchronise device tree with linux v6.1-rc3.
> Note: Nowadays, the intent is for them regular device trees to just be
> synchronised from them Linux kernel device trees and any and all U-Boot
> specific changes need to go into the -u-boot.dtsi device tree include
> files which BTW get included automatically by the U-Boot build system.
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH v5 2/8] imxrt1020: migrate to build system included -u-boot.dtsi
2022-11-07 21:22 ` [PATCH v5 2/8] imxrt1020: migrate to build system included -u-boot.dtsi Marcel Ziswiler
@ 2022-11-08 16:39 ` sbabic
0 siblings, 0 replies; 19+ messages in thread
From: sbabic @ 2022-11-08 16:39 UTC (permalink / raw)
To: Marcel Ziswiler, u-boot
> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Migrate to using automatic build system included -u-boot.dtsi device
> tree include files.
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
> Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH v5 4/8] imx8ulp: synchronise device tree with linux
2022-11-07 21:22 ` [PATCH v5 4/8] imx8ulp: " Marcel Ziswiler
@ 2022-11-08 16:39 ` sbabic
0 siblings, 0 replies; 19+ messages in thread
From: sbabic @ 2022-11-08 16:39 UTC (permalink / raw)
To: Marcel Ziswiler, u-boot
> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Synchronise device tree with linux v6.1-rc3.
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH v5 1/8] vf610: synchronise device tree with linux
2022-11-07 21:22 ` [PATCH v5 1/8] vf610: synchronise device tree with linux Marcel Ziswiler
@ 2022-11-08 16:39 ` sbabic
0 siblings, 0 replies; 19+ messages in thread
From: sbabic @ 2022-11-08 16:39 UTC (permalink / raw)
To: Marcel Ziswiler, u-boot
> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Synchronise device tree with linux v6.1-rc3.
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH v5 8/8] imx8mm: synchronise device tree with linux
2022-11-07 21:22 ` [PATCH v5 8/8] imx8mm: " Marcel Ziswiler
@ 2022-11-08 16:39 ` sbabic
0 siblings, 0 replies; 19+ messages in thread
From: sbabic @ 2022-11-08 16:39 UTC (permalink / raw)
To: Marcel Ziswiler, u-boot
> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Synchronise device tree with linux v6.1-rc3.
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Tested-By: Tim Harvey <tharvey@gateworks.com> #imx8m{m,n,p}-venice-*
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 19+ messages in thread
end of thread, other threads:[~2022-11-08 16:42 UTC | newest]
Thread overview: 19+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-11-07 21:22 [PATCH v5 0/8] arm: dts: imx: sync device trees with upstream linux kernel part 1 Marcel Ziswiler
2022-11-07 21:22 ` [PATCH v5 1/8] vf610: synchronise device tree with linux Marcel Ziswiler
2022-11-08 16:39 ` sbabic
2022-11-07 21:22 ` [PATCH v5 2/8] imxrt1020: migrate to build system included -u-boot.dtsi Marcel Ziswiler
2022-11-08 16:39 ` sbabic
2022-11-07 21:22 ` [PATCH v5 3/8] imxrt1050: synchronise device tree with linux Marcel Ziswiler
2022-11-07 21:55 ` Giulio Benetti
2022-11-08 16:39 ` sbabic
2022-11-07 21:22 ` [PATCH v5 4/8] imx8ulp: " Marcel Ziswiler
2022-11-08 16:39 ` sbabic
2022-11-07 21:22 ` [PATCH v5 5/8] imx8mq: " Marcel Ziswiler
2022-11-08 16:38 ` sbabic
2022-11-07 21:22 ` [PATCH v5 6/8] imx8mp: " Marcel Ziswiler
2022-11-08 16:38 ` sbabic
2022-11-07 21:22 ` [PATCH v5 7/8] imx8mn: " Marcel Ziswiler
2022-11-08 16:37 ` sbabic
2022-11-07 21:22 ` [PATCH v5 8/8] imx8mm: " Marcel Ziswiler
2022-11-08 16:39 ` sbabic
2022-11-07 21:29 ` [PATCH v5 0/8] arm: dts: imx: sync device trees with upstream linux kernel part 1 Fabio Estevam
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox