* [PATCH v3 1/2] doc: board: j721e_evm: Add DM firmware steps
@ 2022-11-09 17:30 Andrew Davis
2022-11-09 17:30 ` [PATCH v3 2/2] doc: board: j721e_evm: Fix code-block type and indents Andrew Davis
0 siblings, 1 reply; 3+ messages in thread
From: Andrew Davis @ 2022-11-09 17:30 UTC (permalink / raw)
To: Simon Glass, Tom Rini, Heinrich Schuchardt, u-boot; +Cc: Andrew Davis
J721e needs DM firmware when using updated SYSFW. Add steps to fetch,
build, and deploy the same.
Signed-off-by: Andrew Davis <afd@ti.com>
---
Changes from v2:
- s/DM/DM Firmware
Changes from v1:
- None
doc/board/ti/j721e_evm.rst | 16 ++++++++++------
1 file changed, 10 insertions(+), 6 deletions(-)
diff --git a/doc/board/ti/j721e_evm.rst b/doc/board/ti/j721e_evm.rst
index 44dc316afd..8608373365 100644
--- a/doc/board/ti/j721e_evm.rst
+++ b/doc/board/ti/j721e_evm.rst
@@ -142,7 +142,11 @@ Sources:
Tree: https://github.com/OP-TEE/optee_os.git
Branch: master
-4. U-Boot:
+4. DM Firmware:
+ Tree: git://git.ti.com/processor-firmware/ti-linux-firmware.git
+ Branch: ti-linux-firmware
+
+5. U-Boot:
Tree: https://source.denx.de/u-boot/u-boot
Branch: master
@@ -152,7 +156,7 @@ Build procedure:
.. code-block:: text
- $ make CROSS_COMPILE=arm-linux-gnueabihf-
+ $ make CROSS_COMPILE=arm-linux-gnueabihf- SOC=j721e
2. ATF:
@@ -172,15 +176,15 @@ Build procedure:
.. code-block:: text
- $ make CROSS_COMPILE=arm-linux-gnueabihf- j721e_evm_r5_defconfig O=/tmp/r5
- $ make CROSS_COMPILE=arm-linux-gnueabihf- O=/tmp/r5
+ $ make CROSS_COMPILE=arm-linux-gnueabihf- j721e_evm_r5_defconfig O=build/r5
+ $ make CROSS_COMPILE=arm-linux-gnueabihf- O=build/r5
* 4.2 A72:
.. code-block:: text
- $ make CROSS_COMPILE=aarch64-linux-gnu- j721e_evm_a72_defconfig O=/tmp/a72
- $ make CROSS_COMPILE=aarch64-linux-gnu- ATF=<path to ATF dir>/build/k3/generic/release/bl31.bin TEE=<path to OPTEE OS dir>/out/arm-plat-k3/core/tee-pager_v2.bin DM=<path to DM firmware image> O=/tmp/a72
+ $ make CROSS_COMPILE=aarch64-linux-gnu- j721e_evm_a72_defconfig O=build/a72
+ $ make CROSS_COMPILE=aarch64-linux-gnu- ATF=<ATF dir>/build/k3/generic/release/bl31.bin TEE=<OPTEE OS dir>/out/arm-plat-k3/core/tee-pager_v2.bin DM=<DM firmware>/ti-dm/j721e/ipc_echo_testb_mcu1_0_release_strip.xer5f O=build/a72
Target Images
--------------
--
2.38.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH v3 2/2] doc: board: j721e_evm: Fix code-block type and indents
2022-11-09 17:30 [PATCH v3 1/2] doc: board: j721e_evm: Add DM firmware steps Andrew Davis
@ 2022-11-09 17:30 ` Andrew Davis
2022-12-02 16:46 ` Heinrich Schuchardt
0 siblings, 1 reply; 3+ messages in thread
From: Andrew Davis @ 2022-11-09 17:30 UTC (permalink / raw)
To: Simon Glass, Tom Rini, Heinrich Schuchardt, u-boot; +Cc: Andrew Davis
* BASH code should be labeled as such.
* Code blocks should be indented by 4 spaces.
Fix these here.
Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Andrew Davis <afd@ti.com>
---
Changes from v2:
- None
Changes from v1:
- New patch with fixes suggested by Heinrich
doc/board/ti/j721e_evm.rst | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/doc/board/ti/j721e_evm.rst b/doc/board/ti/j721e_evm.rst
index 8608373365..ad70f15b7a 100644
--- a/doc/board/ti/j721e_evm.rst
+++ b/doc/board/ti/j721e_evm.rst
@@ -154,37 +154,37 @@ Build procedure:
----------------
1. SYSFW:
-.. code-block:: text
+.. code-block:: bash
- $ make CROSS_COMPILE=arm-linux-gnueabihf- SOC=j721e
+ make CROSS_COMPILE=arm-linux-gnueabihf- SOC=j721e
2. ATF:
-.. code-block:: text
+.. code-block:: bash
- $ make CROSS_COMPILE=aarch64-linux-gnu- ARCH=aarch64 PLAT=k3 TARGET_BOARD=generic SPD=opteed
+ make CROSS_COMPILE=aarch64-linux-gnu- ARCH=aarch64 PLAT=k3 TARGET_BOARD=generic SPD=opteed
3. OPTEE:
-.. code-block:: text
+.. code-block:: bash
- $ make PLATFORM=k3-j721e CFG_ARM64_core=y
+ make PLATFORM=k3-j721e CFG_ARM64_core=y
4. U-Boot:
* 4.1 R5:
-.. code-block:: text
+.. code-block:: bash
- $ make CROSS_COMPILE=arm-linux-gnueabihf- j721e_evm_r5_defconfig O=build/r5
- $ make CROSS_COMPILE=arm-linux-gnueabihf- O=build/r5
+ make CROSS_COMPILE=arm-linux-gnueabihf- j721e_evm_r5_defconfig O=build/r5
+ make CROSS_COMPILE=arm-linux-gnueabihf- O=build/r5
* 4.2 A72:
-.. code-block:: text
+.. code-block:: bash
- $ make CROSS_COMPILE=aarch64-linux-gnu- j721e_evm_a72_defconfig O=build/a72
- $ make CROSS_COMPILE=aarch64-linux-gnu- ATF=<ATF dir>/build/k3/generic/release/bl31.bin TEE=<OPTEE OS dir>/out/arm-plat-k3/core/tee-pager_v2.bin DM=<DM firmware>/ti-dm/j721e/ipc_echo_testb_mcu1_0_release_strip.xer5f O=build/a72
+ make CROSS_COMPILE=aarch64-linux-gnu- j721e_evm_a72_defconfig O=build/a72
+ make CROSS_COMPILE=aarch64-linux-gnu- ATF=<ATF dir>/build/k3/generic/release/bl31.bin TEE=<OPTEE OS dir>/out/arm-plat-k3/core/tee-pager_v2.bin DM=<DM firmware>/ti-dm/j721e/ipc_echo_testb_mcu1_0_release_strip.xer5f O=build/a72
Target Images
--------------
--
2.38.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v3 2/2] doc: board: j721e_evm: Fix code-block type and indents
2022-11-09 17:30 ` [PATCH v3 2/2] doc: board: j721e_evm: Fix code-block type and indents Andrew Davis
@ 2022-12-02 16:46 ` Heinrich Schuchardt
0 siblings, 0 replies; 3+ messages in thread
From: Heinrich Schuchardt @ 2022-12-02 16:46 UTC (permalink / raw)
To: Andrew Davis, Simon Glass, Tom Rini, u-boot
On 11/9/22 18:30, Andrew Davis wrote:
> * BASH code should be labeled as such.
> * Code blocks should be indented by 4 spaces.
>
> Fix these here.
>
> Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
> Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
> ---
>
> Changes from v2:
> - None
>
> Changes from v1:
> - New patch with fixes suggested by Heinrich
>
> doc/board/ti/j721e_evm.rst | 24 ++++++++++++------------
> 1 file changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/doc/board/ti/j721e_evm.rst b/doc/board/ti/j721e_evm.rst
> index 8608373365..ad70f15b7a 100644
> --- a/doc/board/ti/j721e_evm.rst
> +++ b/doc/board/ti/j721e_evm.rst
> @@ -154,37 +154,37 @@ Build procedure:
> ----------------
> 1. SYSFW:
>
> -.. code-block:: text
> +.. code-block:: bash
>
> - $ make CROSS_COMPILE=arm-linux-gnueabihf- SOC=j721e
> + make CROSS_COMPILE=arm-linux-gnueabihf- SOC=j721e
>
> 2. ATF:
>
> -.. code-block:: text
> +.. code-block:: bash
>
> - $ make CROSS_COMPILE=aarch64-linux-gnu- ARCH=aarch64 PLAT=k3 TARGET_BOARD=generic SPD=opteed
> + make CROSS_COMPILE=aarch64-linux-gnu- ARCH=aarch64 PLAT=k3 TARGET_BOARD=generic SPD=opteed
>
> 3. OPTEE:
>
> -.. code-block:: text
> +.. code-block:: bash
>
> - $ make PLATFORM=k3-j721e CFG_ARM64_core=y
> + make PLATFORM=k3-j721e CFG_ARM64_core=y
>
> 4. U-Boot:
>
> * 4.1 R5:
>
> -.. code-block:: text
> +.. code-block:: bash
>
> - $ make CROSS_COMPILE=arm-linux-gnueabihf- j721e_evm_r5_defconfig O=build/r5
> - $ make CROSS_COMPILE=arm-linux-gnueabihf- O=build/r5
> + make CROSS_COMPILE=arm-linux-gnueabihf- j721e_evm_r5_defconfig O=build/r5
> + make CROSS_COMPILE=arm-linux-gnueabihf- O=build/r5
>
> * 4.2 A72:
>
> -.. code-block:: text
> +.. code-block:: bash
>
> - $ make CROSS_COMPILE=aarch64-linux-gnu- j721e_evm_a72_defconfig O=build/a72
> - $ make CROSS_COMPILE=aarch64-linux-gnu- ATF=<ATF dir>/build/k3/generic/release/bl31.bin TEE=<OPTEE OS dir>/out/arm-plat-k3/core/tee-pager_v2.bin DM=<DM firmware>/ti-dm/j721e/ipc_echo_testb_mcu1_0_release_strip.xer5f O=build/a72
> + make CROSS_COMPILE=aarch64-linux-gnu- j721e_evm_a72_defconfig O=build/a72
> + make CROSS_COMPILE=aarch64-linux-gnu- ATF=<ATF dir>/build/k3/generic/release/bl31.bin TEE=<OPTEE OS dir>/out/arm-plat-k3/core/tee-pager_v2.bin DM=<DM firmware>/ti-dm/j721e/ipc_echo_testb_mcu1_0_release_strip.xer5f O=build/a72
>
> Target Images
> --------------
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2022-12-02 16:46 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-11-09 17:30 [PATCH v3 1/2] doc: board: j721e_evm: Add DM firmware steps Andrew Davis
2022-11-09 17:30 ` [PATCH v3 2/2] doc: board: j721e_evm: Fix code-block type and indents Andrew Davis
2022-12-02 16:46 ` Heinrich Schuchardt
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox