From: "Pali Rohár" <pali@kernel.org>
To: Bin Meng <bmeng.cn@gmail.com>
Cc: u-boot@lists.denx.de
Subject: [PATCH u-boot] doc: board: qemu-ppce500: Update supported and unsupported
Date: Tue, 20 Dec 2022 21:06:26 +0100 [thread overview]
Message-ID: <20221220200626.10608-1-pali@kernel.org> (raw)
qemu can emulate also e500v1 core but cannot emulate CPUs from Freescale
PowerPC QorIQ T and P series.
Signed-off-by: Pali Rohár <pali@kernel.org>
---
doc/board/emulation/qemu-ppce500.rst | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/doc/board/emulation/qemu-ppce500.rst b/doc/board/emulation/qemu-ppce500.rst
index 5de0aaf55ded..10427cc56302 100644
--- a/doc/board/emulation/qemu-ppce500.rst
+++ b/doc/board/emulation/qemu-ppce500.rst
@@ -7,7 +7,7 @@ QEMU PPC E500
QEMU for PPC supports a special 'ppce500' machine designed for emulation and
virtualization purposes. This document describes how to run U-Boot under it.
-The QEMU ppce500 machine models a generic PowerPC E500 virtual machine with
+The QEMU ppce500 machine models a generic PowerPC e500 virtual machine with
support for the VirtIO standard networking device connected to the built-in
PCI host controller. Some common devices in the CCSBAR space are modeled,
including MPIC, 16550A UART devices, GPIO, I2C and PCI host controller with
@@ -39,6 +39,7 @@ embedded DTB created by QEMU reflects the new setting.
Both qemu-system-ppc and qemu-system-ppc64 provide emulation for the following
32-bit PowerPC CPUs:
+* e500v1
* e500v2
* e500mc
@@ -61,8 +62,9 @@ When U-Boot boots, you will notice the following::
This is because we only specified a core name to QEMU and it does not have a
meaningful SVR value which represents an actual SoC that integrates such core.
You can specify a real world SoC device that QEMU has built-in support but all
-these SoCs are e500v2 based MPC85xx series, hence you cannot test anything
-built for P4080 (e500mc), P5020 (e5500) and T2080 (e6500).
+these SoCs are e500v1/e500v2 based MPC85xx series, hence you cannot test anything
+built for P10xx/P2010/P2020 (e500v2), P2O4x/P304x/P40xx (e500mc), P50xx/T10xx (e5500)
+and T208x/T4080/T4160/T4240 (e6500).
By default a VirtIO standard PCI networking device is connected as an ethernet
interface at PCI address 0.1.0, but we can switch that to an e1000 NIC by::
--
2.20.1
next reply other threads:[~2022-12-20 20:07 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-20 20:06 Pali Rohár [this message]
2022-12-21 1:15 ` [PATCH u-boot] doc: board: qemu-ppce500: Update supported and unsupported Bin Meng
2022-12-21 7:49 ` Pali Rohár
2022-12-21 9:01 ` Bin Meng
2022-12-21 22:43 ` Pali Rohár
2022-12-22 2:30 ` Bin Meng
2022-12-23 19:15 ` [PATCH v2 " Pali Rohár
2022-12-24 1:13 ` Bin Meng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221220200626.10608-1-pali@kernel.org \
--to=pali@kernel.org \
--cc=bmeng.cn@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox