[PATCH 2/5] configs: am62a: move stack and heap to HSM RAM

[Bryan Brattlof <bb@ti.com>]

Texas Instruments has begun enabling security setting on the SoCs they
produce to instruct ROM and TIFS to begin protecting the Security
Management Subsystem (SMS) from other binaries we load into the chip by
default.

One way ROM does this is by enabling firewalls to protect the OCSRAM
region it's using during bootup. Only after TIFS has started (and had
time to disable the OCSRAM firewall region) will we have write access to
the region.

This means we will need to move the stack & heap from OCSRAM to HSM RAM
and reduce the size of BSS and the SPL to allow it to fit properly.

Signed-off-by: Bryan Brattlof <bb@ti.com>
---
 configs/am62ax_evm_r5_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/configs/am62ax_evm_r5_defconfig b/configs/am62ax_evm_r5_defconfig
index bfffb8eef77d8..0e48f0afa20a5 100644
--- a/configs/am62ax_evm_r5_defconfig
+++ b/configs/am62ax_evm_r5_defconfig
@@ -19,7 +19,7 @@ CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x3500
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x7000ffff
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x43c3a7f0
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x80080000
 CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
-- 
2.39.0