From: Yu Chien Peter Lin <peterlin@andestech.com>
To: <u-boot@lists.denx.de>
Cc: <ycliang@andestech.com>, <rick@andestech.com>,
Yu Chien Peter Lin <peterlin@andestech.com>
Subject: [PATCH 02/11] riscv: Remove redundant Kconfig "RISCV_NDS_CACHE"
Date: Thu, 19 Jan 2023 15:05:35 +0800 [thread overview]
Message-ID: <20230119070544.7423-3-peterlin@andestech.com> (raw)
In-Reply-To: <20230119070544.7423-1-peterlin@andestech.com>
From: Leo Yu-Chi Liang <ycliang@andestech.com>
There is no need for RISCV_NDS_CACHE config to control cache switches.
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
---
arch/riscv/cpu/ax25/Kconfig | 10 -----
arch/riscv/cpu/ax25/cache.c | 84 +------------------------------------
drivers/cache/Kconfig | 1 -
3 files changed, 2 insertions(+), 93 deletions(-)
diff --git a/arch/riscv/cpu/ax25/Kconfig b/arch/riscv/cpu/ax25/Kconfig
index 4a7295d30c..eca68ea2a7 100644
--- a/arch/riscv/cpu/ax25/Kconfig
+++ b/arch/riscv/cpu/ax25/Kconfig
@@ -12,13 +12,3 @@ config RISCV_NDS
help
Run U-Boot on AndeStar V5 platforms and use some specific features
which are provided by Andes Technology AndeStar V5 families.
-
-if RISCV_NDS
-
-config RISCV_NDS_CACHE
- bool "AndeStar V5 families specific cache support"
- depends on RISCV_MMODE || SPL_RISCV_MMODE
- help
- Provide Andes Technology AndeStar V5 families specific cache support.
-
-endif
diff --git a/arch/riscv/cpu/ax25/cache.c b/arch/riscv/cpu/ax25/cache.c
index 35f23c748d..1c0c3772a1 100644
--- a/arch/riscv/cpu/ax25/cache.c
+++ b/arch/riscv/cpu/ax25/cache.c
@@ -67,106 +67,26 @@ void invalidate_dcache_range(unsigned long start, unsigned long end)
void icache_enable(void)
{
-#if !CONFIG_IS_ENABLED(SYS_ICACHE_OFF)
-#ifdef CONFIG_RISCV_NDS_CACHE
-#if CONFIG_IS_ENABLED(RISCV_MMODE)
- asm volatile (
- "csrr t1, mcache_ctl\n\t"
- "ori t0, t1, 0x1\n\t"
- "csrw mcache_ctl, t0\n\t"
- );
-#endif
-#endif
-#endif
}
void icache_disable(void)
{
-#if !CONFIG_IS_ENABLED(SYS_ICACHE_OFF)
-#ifdef CONFIG_RISCV_NDS_CACHE
-#if CONFIG_IS_ENABLED(RISCV_MMODE)
- asm volatile (
- "fence.i\n\t"
- "csrr t1, mcache_ctl\n\t"
- "andi t0, t1, ~0x1\n\t"
- "csrw mcache_ctl, t0\n\t"
- );
-#endif
-#endif
-#endif
}
void dcache_enable(void)
{
-#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
-#ifdef CONFIG_RISCV_NDS_CACHE
-#if CONFIG_IS_ENABLED(RISCV_MMODE)
- asm volatile (
- "csrr t1, mcache_ctl\n\t"
- "ori t0, t1, 0x2\n\t"
- "csrw mcache_ctl, t0\n\t"
- );
-#endif
-#ifdef CONFIG_V5L2_CACHE
- _cache_enable();
-#endif
-#endif
-#endif
}
void dcache_disable(void)
{
-#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
-#ifdef CONFIG_RISCV_NDS_CACHE
-#if CONFIG_IS_ENABLED(RISCV_MMODE)
- csr_write(CCTL_REG_MCCTLCOMMAND_NUM, CCTL_L1D_WBINVAL_ALL);
- asm volatile (
- "csrr t1, mcache_ctl\n\t"
- "andi t0, t1, ~0x2\n\t"
- "csrw mcache_ctl, t0\n\t"
- );
-#endif
-#ifdef CONFIG_V5L2_CACHE
- _cache_disable();
-#endif
-#endif
-#endif
}
int icache_status(void)
{
- int ret = 0;
-
-#ifdef CONFIG_RISCV_NDS_CACHE
-#if CONFIG_IS_ENABLED(RISCV_MMODE)
- asm volatile (
- "csrr t1, mcache_ctl\n\t"
- "andi %0, t1, 0x01\n\t"
- : "=r" (ret)
- :
- : "memory"
- );
-#endif
-#endif
-
- return ret;
+ return 0;
}
int dcache_status(void)
{
- int ret = 0;
-
-#ifdef CONFIG_RISCV_NDS_CACHE
-#if CONFIG_IS_ENABLED(RISCV_MMODE)
- asm volatile (
- "csrr t1, mcache_ctl\n\t"
- "andi %0, t1, 0x02\n\t"
- : "=r" (ret)
- :
- : "memory"
- );
-#endif
-#endif
-
- return ret;
+ return 0;
}
diff --git a/drivers/cache/Kconfig b/drivers/cache/Kconfig
index 40f41a817c..6cb8c3e980 100644
--- a/drivers/cache/Kconfig
+++ b/drivers/cache/Kconfig
@@ -25,7 +25,6 @@ config L2X0_CACHE
config V5L2_CACHE
bool "Andes V5L2 cache driver"
select CACHE
- depends on RISCV_NDS_CACHE
help
Support Andes V5L2 cache controller in AE350 platform.
It will configure tag and data ram timing control from the
--
2.34.1
next prev parent reply other threads:[~2023-01-19 7:06 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-19 7:05 [PATCH 00/11] cache operation cleanups for Andes AE350 platform Yu Chien Peter Lin
2023-01-19 7:05 ` [PATCH 01/11] riscv: global_data.h: Correct the comment for PLICSW Yu Chien Peter Lin
2023-01-31 6:39 ` Leo Liang
[not found] ` <PU1PR03MB2997857A35E6E20FAD5C032AC1D19@PU1PR03MB2997.apcprd03.prod.outlook.com>
2023-02-01 3:37 ` Rick Chen
2023-01-19 7:05 ` Yu Chien Peter Lin [this message]
2023-01-31 6:41 ` [PATCH 02/11] riscv: Remove redundant Kconfig "RISCV_NDS_CACHE" Leo Liang
[not found] ` <PU1PR03MB29972FC9DEB3F9F0889143BAC1D19@PU1PR03MB2997.apcprd03.prod.outlook.com>
2023-02-01 5:20 ` Rick Chen
2023-01-19 7:05 ` [PATCH 03/11] board: AndesTech: ax25-ae350.c: Enable v5l2-cache in spl_board_init() Yu Chien Peter Lin
2023-01-31 6:59 ` Leo Liang
[not found] ` <PU1PR03MB29972FEA49428A23FA2D8786C1D19@PU1PR03MB2997.apcprd03.prod.outlook.com>
2023-02-01 5:23 ` Rick Chen
2023-01-19 7:05 ` [PATCH 04/11] driver: cache: cache-v5l2: Update memory-mapped scheme to support Gen2 platform Yu Chien Peter Lin
2023-01-31 7:01 ` Leo Liang
2023-01-19 7:05 ` [PATCH 05/11] riscv: cpu: ax25: Simplify cache enabling logic in harts_early_init() Yu Chien Peter Lin
2023-01-31 7:07 ` Leo Liang
2023-01-31 15:49 ` Yu-Chien Peter Lin
2023-01-19 7:05 ` [PATCH 06/11] riscv: ae350: dts: Update L2 cache compatible string Yu Chien Peter Lin
2023-01-31 7:07 ` Leo Liang
2023-01-19 7:05 ` [PATCH 07/11] riscv: ax25: cache.c: Cleanups to L1/L2 cache function used in SPL Yu Chien Peter Lin
2023-01-31 7:09 ` Leo Liang
2023-01-19 7:05 ` [PATCH 08/11] configs: ae350: Enable v5l2 cache for AE350 platforms Yu Chien Peter Lin
2023-01-31 7:17 ` Leo Liang
[not found] ` <PU1PR03MB299711E617F0F0969237426EC1D19@PU1PR03MB2997.apcprd03.prod.outlook.com>
2023-02-01 5:32 ` Rick Chen
2023-01-19 7:05 ` [PATCH 09/11] configs: ae350: Increase maximum retry count " Yu Chien Peter Lin
2023-01-31 7:18 ` Leo Liang
2023-01-19 7:05 ` [PATCH 10/11] configs: ae350: Display CPU and board info " Yu Chien Peter Lin
2023-01-31 7:18 ` Leo Liang
2023-01-19 7:05 ` [PATCH 11/11] driver: cache-v5l2: Fix type casting warning on RV32 Yu Chien Peter Lin
2023-01-31 7:19 ` Leo Liang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230119070544.7423-3-peterlin@andestech.com \
--to=peterlin@andestech.com \
--cc=rick@andestech.com \
--cc=u-boot@lists.denx.de \
--cc=ycliang@andestech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox