From: Heiko Schocher <hs@denx.de>
To: U-Boot Mailing List <u-boot@lists.denx.de>
Cc: pali@kernel.org, Tom Rini <trini@konsulko.com>,
Heiko Schocher <hs@denx.de>
Subject: [PATCH v2] powerpc/mpc85xx: use board env file for socrates board
Date: Fri, 27 Jan 2023 06:50:52 +0100 [thread overview]
Message-ID: <20230127055052.356374-1-hs@denx.de> (raw)
as Tom suggested get rid of CFG_EXTRA_ENV_SETTINGS and
enable CONFIG_ENV_SOURCE_FILE and use text file
board/socrates/socrates.env
which contains the default environment. While at it,
cleanup the default Environment.
Signed-off-by: Heiko Schocher <hs@denx.de>
Suggested-by: Tom Rini <trini@konsulko.com>
---
This patch is a follow up as requested from Tom to socrates series
posted here:
https://lists.denx.de/pipermail/u-boot/2023-January/506030.html
Changes in v2:
add changes requested from Tom:
remove baudrate, bootcmd, bootdelay, mtdids and mtdpart setting in env file
remove CONFIG_ENV_SOURCE_FILE
board/socrates/socrates.env | 46 +++++++++++++++++++++++++++
configs/socrates_defconfig | 2 +-
include/configs/socrates.h | 62 -------------------------------------
3 files changed, 47 insertions(+), 63 deletions(-)
create mode 100644 board/socrates/socrates.env
diff --git a/board/socrates/socrates.env b/board/socrates/socrates.env
new file mode 100644
index 0000000000..82e7ff8386
--- /dev/null
+++ b/board/socrates/socrates.env
@@ -0,0 +1,46 @@
+addcons=setenv bootargs $bootargs console=$consdev,$baudrate
+addip=setenv bootargs $bootargs ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off panic=1
+addmtd=setenv bootargs ${bootargs} ${mtdparts}
+boot_nor=run ramargs addcons addmtd;
+ if test -n ${RescueSystemJumper} ;then
+ run rescueargs;
+ else
+ if imi ${system1_addr};then
+ bootm ${system1_addr};
+ else
+ setenv RescueSystemJumper 1;run rescueargs;
+ fi;
+ fi;
+ if imi ${system2_addr}; then
+ bootm ${system2_addr};
+ fi;
+boot_usb=usb start;
+ ext2load usb 0 ${usb_boot_script_r} ${usb_boot_script};
+ if imi ${usb_boot_script_r};then
+ source ${usb_boot_script_r}#conf;
+ fi;
+clean_data=era FFA00000 FFFEFFFF
+clean_uboot_env=protect off FFF00000 FFF3FFFF;era FFF00000 FFF3FFFF
+consdev=ttyS0
+ethprime=eTSEC0
+initrd_high=0x03000000
+loadaddr=0x02000000
+loads_echo=1
+netdev=eth0
+nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath
+preboot=echo;echo Welcome on the Socrates Board;echo
+ramargs=setenv bootargs root=/dev/ram rw
+rescueargs=setenv bootargs $bootargs RescueSystemJumper=$RescueSystemJumper
+rootpath=/opt/poky/3.1.17
+system1_addr=FE000000
+system1_file=system1.itb
+system2_addr=FED00000
+system2_file=system2.itb
+uboot_addr=FFF40000
+uboot_file=u-boot.bin
+update_system1=tftp 110000 ${system1_file};era ${system1_addr} FECFFFFF;cp.b 110000 ${system1_addr} ${filesize};setenv filesize
+update_system2=tftp 110000 ${system2_file};era ${system2_addr} FF9FFFFF;cp.b 110000 ${system2_addr} ${filesize};setenv filesize
+update_uboot=tftp 110000 ${uboot_file};protect off ${uboot_addr} FFFFFFFF;era ${uboot_addr} FFFFFFFF;cp.b 110000 ${uboot_addr} ${filesize};setenv filesize
+usb_boot_script=/boot/socrates_boot.autoscr
+usb_boot_script_r=100000
+verify=1
diff --git a/configs/socrates_defconfig b/configs/socrates_defconfig
index e03c971b5e..312fda9ad0 100644
--- a/configs/socrates_defconfig
+++ b/configs/socrates_defconfig
@@ -31,7 +31,7 @@ CONFIG_BOOT_RETRY=y
CONFIG_BOOT_RETRY_TIME=120
CONFIG_RESET_TO_RETRY=y
CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="run boot_nor"
+CONFIG_BOOTCOMMAND="run boot_usb;run boot_nor"
CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="echo;echo Welcome on the ABB Socrates Board;echo"
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
diff --git a/include/configs/socrates.h b/include/configs/socrates.h
index 305914de85..64cc17ca7c 100644
--- a/include/configs/socrates.h
+++ b/include/configs/socrates.h
@@ -109,68 +109,6 @@
*/
#define CFG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-#define SOCRATES_ENV_MTD \
- "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
- "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
- "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"
-
-#define CFG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "consdev=ttyS0\0" \
- "initrd_high=0x03000000\0" \
- "uboot_file=/home/tftp/syscon3/u-boot.bin\0" \
- "bootfile=/home/tftp/syscon3/uImage\0" \
- "fdt_file=/home/tftp/syscon3/socrates.dtb\0" \
- "initrd_file=/home/tftp/syscon3/uinitrd.gz\0" \
- "uboot_addr=FFF40000\0" \
- "kernel_addr=FE000000\0" \
- "fdt_addr=FE1E0000\0" \
- "ramdisk_addr=FE200000\0" \
- "fdt_addr_r=B00000\0" \
- "kernel_addr_r=200000\0" \
- "ramdisk_addr_r=400000\0" \
- "rootpath=/opt/eldk/ppc_85xxDP\0" \
- "ramargs=setenv bootargs root=/dev/ram rw\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=$serverip:$rootpath\0" \
- "addcons=setenv bootargs $bootargs " \
- "console=$consdev,$baudrate\0" \
- "addip=setenv bootargs $bootargs " \
- "ip=$ipaddr:$serverip:$gatewayip:$netmask" \
- ":$hostname:$netdev:off panic=1\0" \
- "boot_nor=run ramargs addcons addmtd;" \
- "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
- "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
- "tftp ${fdt_addr_r} ${fdt_file}; " \
- "run nfsargs addip addcons addmtd;" \
- "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
- "update_uboot=tftp 100000 ${uboot_file};" \
- "protect off ${uboot_addr} ffffffff;" \
- "era ${uboot_addr} ffffffff;" \
- "cp.b 100000 ${uboot_addr} ${filesize};" \
- "setenv filesize;saveenv\0" \
- "update_kernel=tftp 100000 ${bootfile};" \
- "era fe000000 fe1dffff;" \
- "cp.b 100000 fe000000 ${filesize};" \
- "setenv filesize;saveenv\0" \
- "update_fdt=tftp 100000 ${fdt_file};" \
- "era fe1e0000 fe1fffff;" \
- "cp.b 100000 fe1e0000 ${filesize};" \
- "setenv filesize;saveenv\0" \
- "update_initrd=tftp 100000 ${initrd_file};" \
- "era fe200000 fe9fffff;" \
- "cp.b 100000 fe200000 ${filesize};" \
- "setenv filesize;saveenv\0" \
- "clean_data=era fea00000 fff5ffff\0" \
- "usbargs=setenv bootargs root=/dev/sda1 rw\0" \
- "load_usb=usb start;" \
- "ext2load usb 0:1 ${kernel_addr_r} /boot/uImage\0" \
- "boot_usb=run load_usb usbargs addcons;" \
- "bootm ${kernel_addr_r} - ${fdt_addr};" \
- "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
- SOCRATES_ENV_MTD \
- ""
-
#define CFG_ENV_FLAGS_LIST_STATIC "ethaddr:mw,eth1addr:mw,system1_addr:xw,serial#:sw,ethact:sw,ethprime:sw"
/* pass open firmware flat tree */
--
2.37.3
next reply other threads:[~2023-01-27 5:50 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-27 5:50 Heiko Schocher [this message]
2023-01-27 13:22 ` [PATCH v2] powerpc/mpc85xx: use board env file for socrates board Tom Rini
2023-02-09 21:33 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230127055052.356374-1-hs@denx.de \
--to=hs@denx.de \
--cc=pali@kernel.org \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox