[PATCH v3] imx6q-sabrelite: Re-add mmc aliases

[sbabic@denx.de]

> In commit d0399a46e7cda63c07e3eb8558bef84cfb068028, the device tree was
> synchronized from linux and the aliases were dropped.
> They need to be kept so that the mmc cards are in the right order.
> Without the aliases, u-boot reports:
> MMC:   FSL_SDHC: 2, FSL_SDHC: 3
> With the aliases, u-boot reports:
> MMC:   FSL_SDHC: 0, FSL_SDHC: 1
> The upstream linux device tree does not contain the same aliases than
> u-boot (It keeps the devices order with /dev/mmcblk2 and /dev/mmcblk3).
> Because this board has been using different aliases in u-boot
> and linux, a imx6q-sabrelite-u-boot.dtsi file is added to be
> automatically included in imx6q-sabrelite.dts.
> This way, linux and u-boot each keep their own aliases and there
> is no breakage on current installations.
> This should never be done for new boards as we want to keep linux and
> u-boot with the same aliases as much as possible.
> This patch is only necessary to avoid breaking existing setups.
> Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
> Reviewed-by: Fabio Estevam <festevam@denx.de>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,        Managing Director: Erika Unter  
HRB 165235 Munich,   Office: Kirchenstr.5, 82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================