Re: [RFC PATCH v3 3/9] clk: renesas: add R906G032 driver

[Ralph Siemsen <ralph.siemsen@linaro.org>]

On Wed, Feb 22, 2023 at 05:06:14PM +0100, Marek Vasut wrote:
>On 2/22/23 16:44, Ralph Siemsen wrote:
>>Clock driver for the Renesas RZ/N1 SoC family. This is based
>>on the Linux kernel drivers/clk/renesas/r9a06g032-clocks.c.
>
>For starters, can you please include the exact kernel version , 
>ideally commit ID, from which this way pulled, so that future updates 
>can pull in the diffs from that commit easily ?

Very reasonable request, but a bit difficult to give a concise answer. 
Originally I took the driver as found in the 5.15 kernel. The driver 
actually had not changed since 5.13 commit 6bd913f54f2f ("clk: renesas: 
r9a06g032: Switch to .determine_rate()"). So that's the starting point.

I incorporated subsequent changes to the clock tables and related 
cleanups. Those were only merged into Linux much later:

2dee50ab9e72 clk: renesas: r9a06g032: Fix UART clkgrp bitsel
f46efcc4746f clk: renesas: r9a06g032: Drop some unused fields
2a6da4a11f47 clk: renesas: r9a06g032: Fix the RTC hclock description

Linux driver also had a few other commits, but these are not applicable 
to the u-boot version due to structural changes:

6bd913f54f2f clk: renesas: r9a06g032: Switch to .determine_rate()
f2fb4fe62390 clk: renesas: Zero init clk_init_data
2182066d95c3 clk: renesas: r9a06g032: Probe possible children
885525c1e7e2 clk: renesas: r9a06g032: Export function to set dmamux
02693e11611e clk: renesas: r9a06g032: Repair grave increment error

So I would say it is "up to date" with the lastest Linux commit, even 
though it is based on an earlier version. Is there a good way to include 
the above in the commit message, succinctly?

>Also, can you please CC me on the entire series ?

I've added you to series-cc for future versions. Note that some of the 
mails are currently stuck in moderation queue (too many recipients). I 
let patman pick the default recipients.

Ralph