From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Cc: Marek Vasut <marex@denx.de>,
"Ariel D'Alessandro" <ariel.dalessandro@collabora.com>,
"NXP i.MX U-Boot Team" <uboot-imx@nxp.com>,
Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>,
Fabio Estevam <festevam@gmail.com>,
Joe Hershberger <joe.hershberger@ni.com>,
Lukasz Majewski <lukma@denx.de>,
Marcel Ziswiler <marcel.ziswiler@toradex.com>,
Michael Trimarchi <michael@amarulasolutions.com>,
Peng Fan <peng.fan@nxp.com>, Ramon Fried <rfried.dev@gmail.com>,
Sean Anderson <seanga2@gmail.com>, Stefano Babic <sbabic@denx.de>,
Tim Harvey <tharvey@gateworks.com>,
Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Subject: [PATCH v4 07/14] net: dwc_eth_qos: Add DM CLK support for i.MX8M Plus
Date: Mon, 6 Mar 2023 15:53:47 +0100 [thread overview]
Message-ID: <20230306145354.7439-7-marex@denx.de> (raw)
In-Reply-To: <20230306145354.7439-1-marex@denx.de>
The DWMAC clock in i.MX8M Plus were so far configured via ad-hoc
architecture code. Replace that with DM clock instead. This way,
the driver claims all its required clock, enables and disables
them, and even gets the CSR clock rate and sets the TX clock rate,
without any need of architecture specific register fiddling. Drop
the architecture specific code while at it too.
The adjustment here is modeled after STM32MP15xx clock handling
in this driver.
Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: "Ariel D'Alessandro" <ariel.dalessandro@collabora.com>
Cc: "NXP i.MX U-Boot Team" <uboot-imx@nxp.com>
Cc: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Cc: u-boot@lists.denx.de
---
V2: Turn all the pr_err() into dev_dbg()
V3: No change
V4: No change
---
arch/arm/mach-imx/imx8m/clock_imx8mm.c | 41 --------
drivers/net/dwc_eth_qos_imx.c | 131 +++++++++++++++++++++++--
2 files changed, 121 insertions(+), 51 deletions(-)
diff --git a/arch/arm/mach-imx/imx8m/clock_imx8mm.c b/arch/arm/mach-imx/imx8m/clock_imx8mm.c
index 64ad57e9b39..494bfbedc8c 100644
--- a/arch/arm/mach-imx/imx8m/clock_imx8mm.c
+++ b/arch/arm/mach-imx/imx8m/clock_imx8mm.c
@@ -872,47 +872,6 @@ int set_clk_eqos(enum enet_freq type)
return 0;
}
-
-int imx_eqos_txclk_set_rate(ulong rate)
-{
- u32 val;
- u32 eqos_post_div;
-
- /* disable the clock first */
- clock_enable(CCGR_QOS_ETHENET, 0);
- clock_enable(CCGR_SDMA2, 0);
-
- switch (rate) {
- case 125000000:
- eqos_post_div = 1;
- break;
- case 25000000:
- eqos_post_div = 125000000 / 25000000;
- break;
- case 2500000:
- eqos_post_div = 125000000 / 2500000;
- break;
- default:
- return -EINVAL;
- }
-
- clock_get_target_val(ENET_QOS_CLK_ROOT, &val);
- val &= ~(CLK_ROOT_PRE_DIV_MASK | CLK_ROOT_POST_DIV_MASK);
- val |= CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
- CLK_ROOT_POST_DIV(eqos_post_div - 1);
- clock_set_target_val(ENET_QOS_CLK_ROOT, val);
-
- /* enable clock */
- clock_enable(CCGR_QOS_ETHENET, 1);
- clock_enable(CCGR_SDMA2, 1);
-
- return 0;
-}
-
-u32 imx_get_eqos_csr_clk(void)
-{
- return get_root_clk(ENET_AXI_CLK_ROOT);
-}
#endif
#ifdef CONFIG_FEC_MXC
diff --git a/drivers/net/dwc_eth_qos_imx.c b/drivers/net/dwc_eth_qos_imx.c
index 42cb164ad14..f5f3f2099f0 100644
--- a/drivers/net/dwc_eth_qos_imx.c
+++ b/drivers/net/dwc_eth_qos_imx.c
@@ -7,6 +7,7 @@
#include <clk.h>
#include <cpu_func.h>
#include <dm.h>
+#include <dm/device_compat.h>
#include <errno.h>
#include <eth_phy.h>
#include <log.h>
@@ -32,20 +33,18 @@ __weak u32 imx_get_eqos_csr_clk(void)
return 100 * 1000000;
}
-__weak int imx_eqos_txclk_set_rate(unsigned long rate)
-{
- return 0;
-}
-
static ulong eqos_get_tick_clk_rate_imx(struct udevice *dev)
{
- return imx_get_eqos_csr_clk();
+ struct eqos_priv *eqos = dev_get_priv(dev);
+
+ return clk_get_rate(&eqos->clk_master_bus);
}
static int eqos_probe_resources_imx(struct udevice *dev)
{
struct eqos_priv *eqos = dev_get_priv(dev);
phy_interface_t interface;
+ int ret;
debug("%s(dev=%p):\n", __func__, dev);
@@ -56,6 +55,118 @@ static int eqos_probe_resources_imx(struct udevice *dev)
return -EINVAL;
}
+ eqos->max_speed = dev_read_u32_default(dev, "max-speed", 0);
+
+ ret = clk_get_by_name(dev, "stmmaceth", &eqos->clk_master_bus);
+ if (ret) {
+ dev_dbg(dev, "clk_get_by_name(master_bus) failed: %d", ret);
+ goto err_probe;
+ }
+
+ ret = clk_get_by_name(dev, "ptp_ref", &eqos->clk_ptp_ref);
+ if (ret) {
+ dev_dbg(dev, "clk_get_by_name(ptp_ref) failed: %d", ret);
+ goto err_free_clk_master_bus;
+ }
+
+ ret = clk_get_by_name(dev, "tx", &eqos->clk_tx);
+ if (ret) {
+ dev_dbg(dev, "clk_get_by_name(tx) failed: %d", ret);
+ goto err_free_clk_ptp_ref;
+ }
+
+ ret = clk_get_by_name(dev, "pclk", &eqos->clk_ck);
+ if (ret) {
+ dev_dbg(dev, "clk_get_by_name(pclk) failed: %d", ret);
+ goto err_free_clk_tx;
+ }
+
+ debug("%s: OK\n", __func__);
+ return 0;
+
+err_free_clk_tx:
+ clk_free(&eqos->clk_tx);
+err_free_clk_ptp_ref:
+ clk_free(&eqos->clk_ptp_ref);
+err_free_clk_master_bus:
+ clk_free(&eqos->clk_master_bus);
+err_probe:
+
+ debug("%s: returns %d\n", __func__, ret);
+ return ret;
+}
+
+static int eqos_remove_resources_imx(struct udevice *dev)
+{
+ struct eqos_priv *eqos = dev_get_priv(dev);
+
+ debug("%s(dev=%p):\n", __func__, dev);
+
+ clk_free(&eqos->clk_ck);
+ clk_free(&eqos->clk_tx);
+ clk_free(&eqos->clk_ptp_ref);
+ clk_free(&eqos->clk_master_bus);
+
+ debug("%s: OK\n", __func__);
+ return 0;
+}
+
+static int eqos_start_clks_imx(struct udevice *dev)
+{
+ struct eqos_priv *eqos = dev_get_priv(dev);
+ int ret;
+
+ debug("%s(dev=%p):\n", __func__, dev);
+
+ ret = clk_enable(&eqos->clk_master_bus);
+ if (ret < 0) {
+ dev_dbg(dev, "clk_enable(clk_master_bus) failed: %d", ret);
+ goto err;
+ }
+
+ ret = clk_enable(&eqos->clk_ptp_ref);
+ if (ret < 0) {
+ dev_dbg(dev, "clk_enable(clk_ptp_ref) failed: %d", ret);
+ goto err_disable_clk_master_bus;
+ }
+
+ ret = clk_enable(&eqos->clk_tx);
+ if (ret < 0) {
+ dev_dbg(dev, "clk_enable(clk_tx) failed: %d", ret);
+ goto err_disable_clk_ptp_ref;
+ }
+
+ ret = clk_enable(&eqos->clk_ck);
+ if (ret < 0) {
+ dev_dbg(dev, "clk_enable(clk_ck) failed: %d", ret);
+ goto err_disable_clk_tx;
+ }
+
+ debug("%s: OK\n", __func__);
+ return 0;
+
+err_disable_clk_tx:
+ clk_disable(&eqos->clk_tx);
+err_disable_clk_ptp_ref:
+ clk_disable(&eqos->clk_ptp_ref);
+err_disable_clk_master_bus:
+ clk_disable(&eqos->clk_master_bus);
+err:
+ debug("%s: FAILED: %d\n", __func__, ret);
+ return ret;
+}
+
+static int eqos_stop_clks_imx(struct udevice *dev)
+{
+ struct eqos_priv *eqos = dev_get_priv(dev);
+
+ debug("%s(dev=%p):\n", __func__, dev);
+
+ clk_disable(&eqos->clk_ck);
+ clk_disable(&eqos->clk_tx);
+ clk_disable(&eqos->clk_ptp_ref);
+ clk_disable(&eqos->clk_master_bus);
+
debug("%s: OK\n", __func__);
return 0;
}
@@ -83,7 +194,7 @@ static int eqos_set_tx_clk_speed_imx(struct udevice *dev)
return -EINVAL;
}
- ret = imx_eqos_txclk_set_rate(rate);
+ ret = clk_set_rate(&eqos->clk_tx, rate);
if (ret < 0) {
pr_err("imx (tx_clk, %lu) failed: %d", rate, ret);
return ret;
@@ -107,11 +218,11 @@ static struct eqos_ops eqos_imx_ops = {
.eqos_inval_buffer = eqos_inval_buffer_generic,
.eqos_flush_buffer = eqos_flush_buffer_generic,
.eqos_probe_resources = eqos_probe_resources_imx,
- .eqos_remove_resources = eqos_null_ops,
+ .eqos_remove_resources = eqos_remove_resources_imx,
.eqos_stop_resets = eqos_null_ops,
.eqos_start_resets = eqos_null_ops,
- .eqos_stop_clks = eqos_null_ops,
- .eqos_start_clks = eqos_null_ops,
+ .eqos_stop_clks = eqos_stop_clks_imx,
+ .eqos_start_clks = eqos_start_clks_imx,
.eqos_calibrate_pads = eqos_null_ops,
.eqos_disable_calibration = eqos_null_ops,
.eqos_set_tx_clk_speed = eqos_set_tx_clk_speed_imx,
--
2.39.2
next prev parent reply other threads:[~2023-03-06 14:55 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-06 14:53 [PATCH v4 01/14] clk: imx8mp: Add EQoS MAC clock Marek Vasut
2023-03-06 14:53 ` [PATCH v4 02/14] net: Pull board_interface_eth_init() into common code Marek Vasut
2023-03-30 15:23 ` sbabic
2023-03-06 14:53 ` [PATCH v4 03/14] net: dwc_eth_qos: Drop bogus return after goto Marek Vasut
2023-03-30 15:23 ` sbabic
2023-03-06 14:53 ` [PATCH v4 04/14] net: dwc_eth_qos: Drop unused dm_gpio_free() on STM32 Marek Vasut
2023-03-30 15:23 ` sbabic
2023-03-06 14:53 ` [PATCH v4 05/14] net: dwc_eth_qos: Staticize eqos_inval_buffer_tegra186() Marek Vasut
2023-03-30 15:23 ` sbabic
2023-03-06 14:53 ` [PATCH v4 06/14] net: dwc_eth_qos: Set DMA_MODE SWR bit to reset the MAC Marek Vasut
2023-03-30 15:23 ` sbabic
2023-03-06 14:53 ` Marek Vasut [this message]
2023-03-30 15:31 ` [PATCH v4 07/14] net: dwc_eth_qos: Add DM CLK support for i.MX8M Plus sbabic
2023-03-06 14:53 ` [PATCH v4 08/14] net: dwc_eth_qos: Add i.MX8M Plus RMII support Marek Vasut
2023-03-30 15:22 ` sbabic
2023-03-06 14:53 ` [PATCH v4 09/14] net: dwc_eth_qos: Add board_interface_eth_init() for i.MX8M Plus Marek Vasut
2023-03-30 15:22 ` sbabic
2023-03-06 14:53 ` [PATCH v4 10/14] net: fec_mxc: Add ref clock setup support for i.MX8M Mini/Nano/Plus Marek Vasut
2023-03-30 15:23 ` sbabic
2023-03-06 14:53 ` [PATCH v4 11/14] net: fec_mxc: Add board_interface_eth_init() " Marek Vasut
2023-03-30 15:23 ` sbabic
2023-03-06 14:53 ` [PATCH v4 12/14] arm64: dts: imx8mp: Drop EQoS clock workaround Marek Vasut
2023-03-30 15:22 ` sbabic
2023-03-06 14:53 ` [PATCH v4 13/14] arm64: imx8mp: Drop EQoS GPR[1] board workaround Marek Vasut
2023-03-30 15:23 ` sbabic
2023-03-06 14:53 ` [PATCH v4 14/14] arm64: imx8mm: imx8mn: imx8mp: Drop FEC " Marek Vasut
2023-03-30 15:23 ` sbabic
2023-03-30 15:23 ` [PATCH v4 01/14] clk: imx8mp: Add EQoS MAC clock sbabic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230306145354.7439-7-marex@denx.de \
--to=marex@denx.de \
--cc=andrey.zhizhikin@leica-geosystems.com \
--cc=ariel.dalessandro@collabora.com \
--cc=festevam@gmail.com \
--cc=joe.hershberger@ni.com \
--cc=lukma@denx.de \
--cc=marcel.ziswiler@toradex.com \
--cc=michael@amarulasolutions.com \
--cc=peng.fan@nxp.com \
--cc=rfried.dev@gmail.com \
--cc=sbabic@denx.de \
--cc=seanga2@gmail.com \
--cc=tharvey@gateworks.com \
--cc=tommaso.merciai@amarulasolutions.com \
--cc=u-boot@lists.denx.de \
--cc=uboot-imx@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox