From: Minda Chen <minda.chen@starfivetech.com>
To: "Simon Glass" <sjg@chromium.org>, "Stefan Roese" <sr@denx.de>,
"Andrew Scull" <ascull@google.com>,
"Pali Rohár" <pali@kernel.org>,
"Mark Kettenis" <kettenis@openbsd.org>
Cc: <u-boot@lists.denx.de>, Rick Chen <rick@andestech.com>,
Leo <ycliang@andestech.com>,
Mason Huo <mason.huo@starfivetech.com>,
Yanhong Wang <yanhong.wang@starfivetech.com>,
Leyfoon Tan <leyfoon.tan@starfivetech.com>,
Kevin Xie <kevin.xie@starfivetech.com>,
Minda Chen <minda.chen@starfivetech.com>
Subject: [PATCH v3 3/3] riscv: dts: starfive: Enable PCIe host controller
Date: Wed, 29 Mar 2023 18:01:43 +0800 [thread overview]
Message-ID: <20230329100143.10724-4-minda.chen@starfivetech.com> (raw)
In-Reply-To: <20230329100143.10724-1-minda.chen@starfivetech.com>
From: Mason Huo <mason.huo@starfivetech.com>
Enable and add pinctrl configuration for PCIe host controller.
Also add JH7110 stg syscon configuration.
Signed-off-by: Mason Huo <mason.huo@starfivetech.com>
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
---
.../dts/jh7110-starfive-visionfive-2.dtsi | 11 +++
arch/riscv/dts/jh7110.dtsi | 74 +++++++++++++++++++
2 files changed, 85 insertions(+)
diff --git a/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi
index c6b6dfa940..12245576ac 100644
--- a/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi
@@ -7,6 +7,7 @@
#include "jh7110.dtsi"
#include <dt-bindings/pinctrl/pinctrl-starfive-jh7110.h>
+#include <dt-bindings/gpio/gpio.h>
/ {
aliases {
serial0 = &uart0;
@@ -300,6 +301,16 @@
};
};
+&pcie0 {
+ reset-gpios = <&sysgpio 26 GPIO_ACTIVE_LOW>;
+ status = "disabled";
+};
+
+&pcie1 {
+ reset-gpios = <&sysgpio 28 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
&syscrg {
assigned-clocks = <&syscrg JH7110_SYSCLK_CPU_ROOT>,
<&syscrg JH7110_SYSCLK_BUS_ROOT>,
diff --git a/arch/riscv/dts/jh7110.dtsi b/arch/riscv/dts/jh7110.dtsi
index bd60879615..eaf8035a61 100644
--- a/arch/riscv/dts/jh7110.dtsi
+++ b/arch/riscv/dts/jh7110.dtsi
@@ -569,5 +569,79 @@
gpio-controller;
#gpio-cells = <2>;
};
+
+ pcie0: pcie@2B000000 {
+ compatible = "starfive,jh7110-pcie";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ reg = <0x0 0x2B000000 0x0 0x1000000>,
+ <0x9 0x40000000 0x0 0x10000000>;
+ reg-names = "reg", "config";
+ device_type = "pci";
+ starfive,stg-syscon = <&stg_syscon 0xc0 0xc4 0x130>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x82000000 0x0 0x30000000 0x0 0x30000000 0x0 0x08000000>,
+ <0xc3000000 0x9 0x00000000 0x9 0x00000000 0x0 0x40000000>;
+ msi-parent = <&plic>;
+ interrupts = <56>;
+ interrupt-controller;
+ interrupt-names = "msi";
+ interrupt-parent = <&plic>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &plic 0x1>,
+ <0x0 0x0 0x0 0x2 &plic 0x2>,
+ <0x0 0x0 0x0 0x3 &plic 0x3>,
+ <0x0 0x0 0x0 0x4 &plic 0x4>;
+ resets = <&stgcrg JH7110_STGRST_PCIE0_MST0>,
+ <&stgcrg JH7110_STGRST_PCIE0_SLV0>,
+ <&stgcrg JH7110_STGRST_PCIE0_SLV>,
+ <&stgcrg JH7110_STGRST_PCIE0_BRG>,
+ <&stgcrg JH7110_STGRST_PCIE0_CORE>,
+ <&stgcrg JH7110_STGRST_PCIE0_APB>;
+ clocks = <&syscrg JH7110_SYSCLK_NOC_BUS_STG_AXI>,
+ <&stgcrg JH7110_STGCLK_PCIE0_TL>,
+ <&stgcrg JH7110_STGCLK_PCIE0_AXI>,
+ <&stgcrg JH7110_STGCLK_PCIE0_APB>;
+ clock-names = "noc_bus_stg_axi", "pcie0_tl", "pcie0_axi", "pcie0_apb";
+ status = "disabled";
+ };
+
+ pcie1: pcie@2C000000 {
+ compatible = "starfive,jh7110-pcie";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ reg = <0x0 0x2C000000 0x0 0x1000000>,
+ <0x9 0xc0000000 0x0 0x10000000>;
+ reg-names = "reg", "config";
+ device_type = "pci";
+ starfive,stg-syscon = <&stg_syscon 0x270 0x274 0x2e0>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x82000000 0x0 0x38000000 0x0 0x38000000 0x0 0x08000000>,
+ <0xc3000000 0x9 0x80000000 0x9 0x80000000 0x0 0x40000000>;
+ msi-parent = <&plic>;
+ interrupts = <57>;
+ interrupt-controller;
+ interrupt-names = "msi";
+ interrupt-parent = <&plic>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &plic 0x1>,
+ <0x0 0x0 0x0 0x2 &plic 0x2>,
+ <0x0 0x0 0x0 0x3 &plic 0x3>,
+ <0x0 0x0 0x0 0x4 &plic 0x4>;
+ resets = <&stgcrg JH7110_STGRST_PCIE1_MST0>,
+ <&stgcrg JH7110_STGRST_PCIE1_SLV0>,
+ <&stgcrg JH7110_STGRST_PCIE1_SLV>,
+ <&stgcrg JH7110_STGRST_PCIE1_BRG>,
+ <&stgcrg JH7110_STGRST_PCIE1_CORE>,
+ <&stgcrg JH7110_STGRST_PCIE1_APB>;
+ clocks = <&syscrg JH7110_SYSCLK_NOC_BUS_STG_AXI>,
+ <&stgcrg JH7110_STGCLK_PCIE1_TL>,
+ <&stgcrg JH7110_STGCLK_PCIE1_AXI>,
+ <&stgcrg JH7110_STGCLK_PCIE1_APB>;
+ clock-names = "noc_bus_stg_axi", "pcie1_tl", "pcie1_axi", "pcie1_apb";
+ status = "disabled";
+ };
};
};
--
2.17.1
prev parent reply other threads:[~2023-03-29 10:03 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-29 10:01 [PATCH v3 0/3] Add StarFive JH7110 PCIe drvier support Minda Chen
2023-03-29 10:01 ` [PATCH v3 1/3] starfive: pci: Add StarFive JH7110 pcie driver Minda Chen
2023-03-29 17:27 ` Pali Rohár
2023-03-31 10:35 ` Minda Chen
2023-03-31 12:59 ` Pali Rohár
2023-04-07 8:56 ` Minda Chen
2023-03-29 10:01 ` [PATCH v3 2/3] configs: starfive-jh7110: Add support for PCIe host driver Minda Chen
2023-03-29 10:01 ` Minda Chen [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230329100143.10724-4-minda.chen@starfivetech.com \
--to=minda.chen@starfivetech.com \
--cc=ascull@google.com \
--cc=kettenis@openbsd.org \
--cc=kevin.xie@starfivetech.com \
--cc=leyfoon.tan@starfivetech.com \
--cc=mason.huo@starfivetech.com \
--cc=pali@kernel.org \
--cc=rick@andestech.com \
--cc=sjg@chromium.org \
--cc=sr@denx.de \
--cc=u-boot@lists.denx.de \
--cc=yanhong.wang@starfivetech.com \
--cc=ycliang@andestech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox