From: sbabic@denx.de
To: Ye Li <ye.li@nxp.com>,u-boot@lists.denx.de
Subject: [PATCH 13/23] imx: imx8ulp: Configure XRDC PDAC and MSC for DBD owner=S400 only
Date: Wed, 29 Mar 2023 22:16:17 +0200 (CEST) [thread overview]
Message-ID: <20230329201627.4470C86027@phobos.denx.de> (raw)
In-Reply-To: <1675154554-88217-14-git-send-email-ye.li@nxp.com>
> This patch is used to support DBD owner fuse changed to S400 only.
> The XRDC PDAC2 for LPAV pbridge5 and MSC1/2/3 for GPIO and LPAV are not
> configured by S400 default setting. So these PDAC and MSC are invalid,
> only DBD owner can access the corresponding resources.
> We have to configure necessary PDAC and MSC for SPL before DDR
> initialization.
> Signed-off-by: Ye Li <ye.li@nxp.com>
> Reviewed-by: Peng Fan <peng.fan@nxp.com>
Applied to u-boot-imx, -next, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
next prev parent reply other threads:[~2023-03-29 20:18 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-31 8:42 [PATCH 00/23] Add i.MX8ULP A1 revision support Ye Li
2023-01-31 8:42 ` [PATCH 01/23] imx: imx8ulp: Fix MU device probe failure Ye Li
2023-03-29 20:16 ` sbabic
2023-01-31 8:42 ` [PATCH 02/23] imx: imx8ulp: Get chip revision from Sentinel Ye Li
2023-03-29 20:17 ` sbabic
2023-01-31 8:42 ` [PATCH 03/23] imx: imx8ulp: Limit the eMMC ROM API workaround to A0.1 part Ye Li
2023-03-29 20:16 ` sbabic
2023-01-31 8:42 ` [PATCH 04/23] imx: imx8ulp: Set XRDC MRC4/5 for access DDR from APD Ye Li
2023-03-29 20:16 ` sbabic
2023-01-31 8:42 ` [PATCH 05/23] imx: imx8ulp: Remove the TRDC configure from A35 Ye Li
2023-03-29 20:16 ` sbabic
2023-01-31 8:42 ` [PATCH 06/23] imx: imx8ulp: Adjust handshake to sync TRDC and XRDC completion Ye Li
2023-03-29 20:16 ` sbabic
2023-01-31 8:42 ` [PATCH 07/23] imx: imx8ulp: configure XRDC for DRAM access from S400 Ye Li
2023-03-29 20:16 ` sbabic
2023-01-31 8:42 ` [PATCH 08/23] ddr: imx8ulp: Change DRAM timing save area to 0x20055000 Ye Li
2023-03-29 20:16 ` sbabic
2023-01-31 8:42 ` [PATCH 09/23] imx: imx8ulp: Reconfigure MRC3 for SRAM0 access Ye Li
2023-03-29 20:16 ` sbabic
2023-01-31 8:42 ` [PATCH 10/23] imx: imx8ulp: Clear dividers in PLL3DIV_PFD registers Ye Li
2023-03-29 20:16 ` sbabic
2023-01-31 8:42 ` [PATCH 11/23] imx: imx8ulp: upower: replace magic number with macro Ye Li
2023-03-29 20:17 ` sbabic
2023-01-31 8:42 ` [PATCH 12/23] imx: imx8ulp: upower: make code cleaner Ye Li
2023-03-29 20:17 ` sbabic
2023-01-31 8:42 ` [PATCH 13/23] imx: imx8ulp: Configure XRDC PDAC and MSC for DBD owner=S400 only Ye Li
2023-03-29 20:16 ` sbabic [this message]
2023-01-31 8:42 ` [PATCH 14/23] imx: imx8ulp: Update clocks to meet max rate restrictions Ye Li
2023-03-29 20:15 ` sbabic
2023-01-31 8:42 ` [PATCH 15/23] imx: sentinel: Update S400 API get info message structure Ye Li
2023-03-29 20:16 ` sbabic
2023-01-31 8:42 ` [PATCH 16/23] misc: fuse: Update fuse mapping for 8ULP S400 API Ye Li
2023-03-29 20:15 ` sbabic
2023-01-31 8:42 ` [PATCH 17/23] misc: fuse: Lock 8ULP ECC-protected fuse when programming Ye Li
2023-03-29 20:15 ` sbabic
2023-01-31 8:42 ` [PATCH 18/23] ddr: imx: Update the ddr init flow on imx8ulp Ye Li
2023-03-29 20:16 ` sbabic
2023-01-31 8:42 ` [PATCH 19/23] imx8ulp_evk: Update the DDR timing Ye Li
2023-03-29 20:17 ` sbabic
2023-01-31 8:42 ` [PATCH 20/23] imx8ulp_evk: Change to use DDR driver Ye Li
2023-03-29 20:16 ` sbabic
2023-01-31 8:42 ` [PATCH 21/23] imx8ulp_evk: Update DDR ports arbitration for DCNANO underrun Ye Li
2023-03-29 20:16 ` sbabic
2023-01-31 8:42 ` [PATCH 22/23] imx8ulp_evk: disable overflow of port0 for LPAV Ye Li
2023-03-29 20:16 ` sbabic
2023-01-31 8:42 ` [PATCH 23/23] imx8ulp_evk: Clear data at fdt_addr_r before booting kernel Ye Li
2023-03-29 20:16 ` sbabic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230329201627.4470C86027@phobos.denx.de \
--to=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
--cc=ye.li@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox