[PATCH 2/2] mx51evk: Remove unused mx51evk_video.c file

Fabio Estevam
2023-03-14T11:58:53Z

From: Fabio Estevam <festevam@denx.de>

Since commit 1fa43cad8625 ("video: Drop references to CONFIG_VIDEO et al")
the mx51evk_video.c is no longer used.

Remove the unused file.

Signed-off-by: Fabio Estevam <festevam@denx.de>
---
board/freescale/mx51evk/mx51evk_video.c | 98 -------------------------
1 file changed, 98 deletions(-)
delete mode 100644 board/freescale/mx51evk/mx51evk_video.c

diff --git a/board/freescale/mx51evk/mx51evk_video.c b/board/freescale/mx51evk/mx51evk_video.c
deleted file mode 100644
index 3715c5d738..0000000000
--- a/board/freescale/mx51evk/mx51evk_video.c
+++ /dev/null
@@ -1,98 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2012 Freescale Semiconductor, Inc.
- * Fabio Estevam <fabio.estevam@freescale.com>
- */
-
-#include <common.h>
-#include <env.h>
-#include <linux/list.h>
-#include <asm/gpio.h>
-#include <asm/arch/iomux-mx51.h>
-#include <linux/fb.h>
-#include <ipu_pixfmt.h>
-
-#define MX51EVK_LCD_3V3 IMX_GPIO_NR(4, 9)
-#define MX51EVK_LCD_5V IMX_GPIO_NR(4, 10)
-#define MX51EVK_LCD_BACKLIGHT IMX_GPIO_NR(3, 4)
-
-static struct fb_videomode const claa_wvga = {
- .name = "CLAA07LC0ACW",
- .refresh = 57,
- .xres = 800,
- .yres = 480,
- .pixclock = 37037,
- .left_margin = 40,
- .right_margin = 60,
- .upper_margin = 10,
- .lower_margin = 10,
- .hsync_len = 20,
- .vsync_len = 10,
- .sync = 0,
- .vmode = FB_VMODE_NONINTERLACED
-};
-
-static struct fb_videomode const dvi = {
- .name = "DVI panel",
- .refresh = 60,
- .xres = 1024,
- .yres = 768,
- .pixclock = 15385,
- .left_margin = 220,
- .right_margin = 40,
- .upper_margin = 21,
- .lower_margin = 7,
- .hsync_len = 60,
- .vsync_len = 10,
- .sync = 0,
- .vmode = FB_VMODE_NONINTERLACED
-};
-
-void setup_iomux_lcd(void)
-{
- /* DI2_PIN15 */
- imx_iomux_v3_setup_pad(MX51_PAD_DI_GP4__DI2_PIN15);
-
- /* Pad settings for DI2_DISP_CLK */
- imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK,
- PAD_CTL_PKE | PAD_CTL_DSE_MAX | PAD_CTL_SRE_SLOW));
-
- /* Turn on 3.3V voltage for LCD */
- imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_CSI2_D12__GPIO4_9,
- NO_PAD_CTRL));
- gpio_direction_output(MX51EVK_LCD_3V3, 1);
-
- /* Turn on 5V voltage for LCD */
- imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_CSI2_D13__GPIO4_10,
- NO_PAD_CTRL));
- gpio_direction_output(MX51EVK_LCD_5V, 1);
-
- /* Turn on GPIO backlight */
- imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_DI1_D1_CS__GPIO3_4,
- NO_PAD_CTRL));
- gpio_direction_output(MX51EVK_LCD_BACKLIGHT, 1);
-}
-
-int board_video_skip(void)
-{
- int ret;
- char const *e = env_get("panel");
-
- if (e) {
- if (strcmp(e, "claa") == 0) {
- ret = ipuv3_fb_init(&claa_wvga, 1, IPU_PIX_FMT_RGB565);
- if (ret)
- printf("claa cannot be configured: %d\n", ret);
- return ret;
- }
- }
-
- /*
- * 'panel' env variable not found or has different value than 'claa'
- * Defaulting to dvi output.
- */
- ret = ipuv3_fb_init(&dvi, 0, IPU_PIX_FMT_RGB24);
- if (ret)
- printf("dvi cannot be configured: %d\n", ret);
- return ret;
-}
--
2.34.1