From: Andrew Davis <afd@ti.com>
To: Simon Glass <sjg@chromium.org>, Tom Rini <trini@konsulko.com>,
<u-boot@lists.denx.de>
Cc: Andrew Davis <afd@ti.com>
Subject: [PATCH 05/12] configs: j721s2_evm.h: Remove refrences to J7200 EVM
Date: Thu, 30 Mar 2023 15:28:50 -0500 [thread overview]
Message-ID: <20230330202857.8216-5-afd@ti.com> (raw)
In-Reply-To: <20230330202857.8216-1-afd@ti.com>
The J7200 EVM will not include this file, all these J7200 checks look
to be copy/paste errors from j721e_evm.h, which J7200 *can* include.
Signed-off-by: Andrew Davis <afd@ti.com>
---
include/configs/j721s2_evm.h | 23 ++---------------------
1 file changed, 2 insertions(+), 21 deletions(-)
diff --git a/include/configs/j721s2_evm.h b/include/configs/j721s2_evm.h
index d401f28ff21..45d080023f6 100644
--- a/include/configs/j721s2_evm.h
+++ b/include/configs/j721s2_evm.h
@@ -20,7 +20,7 @@
#define CFG_SYS_SDRAM_BASE1 0x880000000
/* SPL Loader Configuration */
-#if defined(CONFIG_TARGET_J721S2_A72_EVM) || defined(CONFIG_TARGET_J7200_A72_EVM)
+#if defined(CONFIG_TARGET_J721S2_A72_EVM)
#define CFG_SYS_UBOOT_BASE 0x50280000
/* Image load address in RAM for DFU boot*/
#else
@@ -52,10 +52,6 @@
#define EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC \
"addr_mcur5f0_0load=0x89000000\0" \
"name_mcur5f0_0fw=/lib/firmware/j7-mcu-r5f0_0-fw\0"
-#elif defined(CONFIG_TARGET_J7200_R5_EVM)
-#define EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC \
- "addr_mcur5f0_0load=0x89000000\0" \
- "name_mcur5f0_0fw=/lib/firmware/j7200-mcu-r5f0_0-fw\0"
#else
#define EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC ""
#endif
@@ -86,7 +82,7 @@
"partitions=" PARTS_DEFAULT
/* Set the default list of remote processors to boot */
-#if defined(CONFIG_TARGET_J721S2_A72_EVM) || defined(CONFIG_TARGET_J7200_A72_EVM)
+#if defined(CONFIG_TARGET_J721S2_A72_EVM)
#ifdef DEFAULT_RPROCS
#undef DEFAULT_RPROCS
#endif
@@ -102,21 +98,6 @@
"7 /lib/firmware/j721s2-c71_1-fw "
#endif /* CONFIG_TARGET_J721S2_A72_EVM */
-#ifdef CONFIG_TARGET_J7200_A72_EVM
-#define EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY \
- "do_main_cpsw0_qsgmii_phyinit=1\0" \
- "init_main_cpsw0_qsgmii_phy=gpio set gpio@22_17;" \
- "gpio clear gpio@22_16\0" \
- "main_cpsw0_qsgmii_phyinit=" \
- "if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1 && test ${dorprocboot} -eq 1 && " \
- "test ${boot} = mmc; then " \
- "run init_main_cpsw0_qsgmii_phy;" \
- "fi;\0"
-#define DEFAULT_RPROCS "" \
- "2 /lib/firmware/j7200-main-r5f0_0-fw " \
- "3 /lib/firmware/j7200-main-r5f0_1-fw "
-#endif /* CONFIG_TARGET_J7200_A72_EVM */
-
#ifndef EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY
#define EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY
#endif
--
2.39.2
next prev parent reply other threads:[~2023-03-30 20:29 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-30 20:28 [PATCH 01/12] arm: mach-k3: Move MSMC fixup to SoC level Andrew Davis
2023-03-30 20:28 ` [PATCH 02/12] arm: mach-k3: Move J721e SoC detection out of common section Andrew Davis
2023-03-30 20:28 ` [PATCH 03/12] soc: soc_ti_k3: Use hardware.h to remove definition duplication Andrew Davis
2023-03-30 20:28 ` [PATCH 04/12] configs: j721x_evm.h: Remove unneeded check for SYS_K3_SPL_ATF Andrew Davis
2023-03-30 20:28 ` Andrew Davis [this message]
2023-03-30 20:28 ` [PATCH 06/12] arm: mach-k3: Make release_resources_for_core_shutdown() common Andrew Davis
2023-03-30 20:28 ` [PATCH 07/12] arm: mach-k3: Move sysfw-loader.h out of mach includes Andrew Davis
2023-03-30 20:28 ` [PATCH 08/12] arm: mach-k3: Add weak do_board_detect() to common file Andrew Davis
2023-04-02 10:44 ` Christian Gmeiner
2023-04-05 14:42 ` Andrew Davis
2023-03-30 20:28 ` [PATCH 09/12] arm: mach-k3: Remove unused fdt_disable_node() Andrew Davis
2023-03-30 20:28 ` [PATCH 10/12] arm: mach-k3: Move sdelay() and wait_on_value() declaration Andrew Davis
2023-03-30 20:28 ` [PATCH 11/12] arm: mach-k3: Move J721s2 SPL init functions to mach-k3 Andrew Davis
2023-03-30 20:28 ` [PATCH 12/12] arm: mach-k3: Remove empty sys_proto.h include Andrew Davis
2023-04-02 10:47 ` [PATCH 01/12] arm: mach-k3: Move MSMC fixup to SoC level Christian Gmeiner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230330202857.8216-5-afd@ti.com \
--to=afd@ti.com \
--cc=sjg@chromium.org \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox