Re: [PATCH V2 2/2] net: phy: Make phy_interface_is_rgmii a switch statement

["Marek Behún" <kabel@kernel.org>]

On Thu, 13 Apr 2023 23:24:33 -0500
Nishanth Menon <nm@ti.com> wrote:

> Recent commit 75d28899e3e9 ("net: phy: Synchronize PHY interface modes
> with Linux") reordered the enum definitions. This exposed a problem in
> range checking functions to identify the interface type. Though this
> specific api was'nt impacted (all the RGMII definitions remained within
> range), this experience should be used to never to have to face this
> kind of challenge again.
> 
> While it is possible for the phy drivers to practically use the enum's
> directly, drivers such as dp83867, dp83869, marvell, micrel_ksz90x1 etc
> use the same.
> 
> Reported-by: Tom Rini <trini@konsulko.com>
> Signed-off-by: Nishanth Menon <nm@ti.com>
> ---
> Changes since V1:
> * Switch update based on feedback from Marek
> 
> V1: https://lore.kernel.org/r/20230413180713.2922524-3-nm@ti.com
>  include/phy.h | 11 +++++++++--
>  1 file changed, 9 insertions(+), 2 deletions(-)
> 
> diff --git a/include/phy.h b/include/phy.h
> index 51dadcf14478..600966bc8b20 100644
> --- a/include/phy.h
> +++ b/include/phy.h
> @@ -361,8 +361,15 @@ int get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id);
>   */
>  static inline bool phy_interface_is_rgmii(struct phy_device *phydev)
>  {
> -	return phydev->interface >= PHY_INTERFACE_MODE_RGMII &&
> -		phydev->interface <= PHY_INTERFACE_MODE_RGMII_TXID;
> +	switch (phydev->interface) {
> +	case PHY_INTERFACE_MODE_RGMII:
> +	case PHY_INTERFACE_MODE_RGMII_ID:
> +	case PHY_INTERFACE_MODE_RGMII_RXID:
> +	case PHY_INTERFACE_MODE_RGMII_TXID:
> +		return 1;
> +	default:
> +		return 0;
> +	}
>  }
>  
>  /**

Reviewed-by: Marek Behún <kabel@kernel.org>