[PATCH v3 0/5] enable DMA and CPSW nodes for am62ax SoC family

[Bryan Brattlof <bb@ti.com>]

Hello again everyone!

This patch series syncs TI's am62ax device tree files with what has been
merged in the v6.3-rc6 of the Linux Kernel. This series will also enable
YMODEM support to make automated testing (which uses the UART boot
method to load the bootloaders into the SoC)

Thanks for reviewing
~Bryan

Changes from v2: [1]
- pulled linux dtbs from v6.3-rc6 instead of -rc4

Changed from v1: [0]
- Rebased on top of -next branch
- dropped 'u-boot,dm-spl' for the new 'bootph-pre-ram' properties

[0] https://lore.kernel.org/u-boot/20230327184035.2128786-1-bb@ti.com/
[1] https://lore.kernel.org/u-boot/20230402213617.1759491-1-bb@ti.com/

Bryan Brattlof (4):
  arm: dts: sync am62ax dtbs with linux v6.3-rc6
  arm: dts: add DMA and CPSW nodes for uboot
  configs: enable net features for am62ax
  configs: am62ax: enable ymodem support for a53 spl

Vignesh Raghavendra (1):
  dma: ti: k3-udma: Introduce DMA support for the am62ax

 arch/arm/dts/k3-am62a-main.dtsi       | 365 ++++++++++++++++++++++++++
 arch/arm/dts/k3-am62a-mcu.dtsi        |  51 ++++
 arch/arm/dts/k3-am62a-wakeup.dtsi     |   2 +-
 arch/arm/dts/k3-am62a7-r5-sk.dts      |   8 +
 arch/arm/dts/k3-am62a7-sk-u-boot.dtsi |  26 +-
 arch/arm/dts/k3-am62a7-sk.dts         |  75 +++++-
 arch/arm/dts/k3-am62a7.dtsi           |   1 +
 configs/am62ax_evm_a53_defconfig      |   7 +-
 drivers/dma/ti/Makefile               |   1 +
 drivers/dma/ti/k3-psil-am62a.c        | 196 ++++++++++++++
 drivers/dma/ti/k3-psil-priv.h         |   1 +
 drivers/dma/ti/k3-psil.c              |   2 +
 12 files changed, 729 insertions(+), 6 deletions(-)
 create mode 100644 drivers/dma/ti/k3-psil-am62a.c


base-commit: a25dcda452bf6a6de72764a8d990d72e5def643d
-- 
2.40.0