From: Eugen Hristev <eugen.hristev@collabora.com>
To: kever.yang@rock-chips.com, jonas@kwiboo.se,
eugen.hristev@collabora.com, u-boot@lists.denx.de
Cc: u-boot-amlogic@groups.io, xdrudis@tinet.cat, jagan@edgeble.ai,
neil.armstrong@linaro.org, anarsoul@gmail.com
Subject: [PATCH v5 4/6] phy: remove phy-supply related code
Date: Wed, 19 Apr 2023 16:40:12 +0300 [thread overview]
Message-ID: <20230419134014.128461-4-eugen.hristev@collabora.com> (raw)
In-Reply-To: <20230419134014.128461-1-eugen.hristev@collabora.com>
phy-supply is now handled at uclass level. Remove it from the drivers that
implement it at the driver level.
Suggested-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
---
drivers/phy/meson-g12a-usb2.c | 48 -----------------------------------
drivers/phy/meson-gxbb-usb2.c | 38 ---------------------------
drivers/phy/meson-gxl-usb2.c | 30 ----------------------
3 files changed, 116 deletions(-)
diff --git a/drivers/phy/meson-g12a-usb2.c b/drivers/phy/meson-g12a-usb2.c
index 2fbba7fdae01..650b88bd1803 100644
--- a/drivers/phy/meson-g12a-usb2.c
+++ b/drivers/phy/meson-g12a-usb2.c
@@ -54,50 +54,12 @@
struct phy_meson_g12a_usb2_priv {
struct regmap *regmap;
-#if CONFIG_IS_ENABLED(DM_REGULATOR)
- struct udevice *phy_supply;
-#endif
#if CONFIG_IS_ENABLED(CLK)
struct clk clk;
#endif
struct reset_ctl reset;
};
-
-static int phy_meson_g12a_usb2_power_on(struct phy *phy)
-{
-#if CONFIG_IS_ENABLED(DM_REGULATOR)
- struct udevice *dev = phy->dev;
- struct phy_meson_g12a_usb2_priv *priv = dev_get_priv(dev);
-
- if (priv->phy_supply) {
- int ret = regulator_set_enable(priv->phy_supply, true);
- if (ret)
- return ret;
- }
-#endif
-
- return 0;
-}
-
-static int phy_meson_g12a_usb2_power_off(struct phy *phy)
-{
-#if CONFIG_IS_ENABLED(DM_REGULATOR)
- struct udevice *dev = phy->dev;
- struct phy_meson_g12a_usb2_priv *priv = dev_get_priv(dev);
-
- if (priv->phy_supply) {
- int ret = regulator_set_enable(priv->phy_supply, false);
- if (ret) {
- pr_err("Error disabling PHY supply\n");
- return ret;
- }
- }
-#endif
-
- return 0;
-}
-
static int phy_meson_g12a_usb2_init(struct phy *phy)
{
struct udevice *dev = phy->dev;
@@ -155,8 +117,6 @@ static int phy_meson_g12a_usb2_exit(struct phy *phy)
struct phy_ops meson_g12a_usb2_phy_ops = {
.init = phy_meson_g12a_usb2_init,
.exit = phy_meson_g12a_usb2_exit,
- .power_on = phy_meson_g12a_usb2_power_on,
- .power_off = phy_meson_g12a_usb2_power_off,
};
int meson_g12a_usb2_phy_probe(struct udevice *dev)
@@ -193,14 +153,6 @@ int meson_g12a_usb2_phy_probe(struct udevice *dev)
}
#endif
-#if CONFIG_IS_ENABLED(DM_REGULATOR)
- ret = device_get_supply_regulator(dev, "phy-supply", &priv->phy_supply);
- if (ret && ret != -ENOENT) {
- pr_err("Failed to get PHY regulator\n");
- return ret;
- }
-#endif
-
return 0;
}
diff --git a/drivers/phy/meson-gxbb-usb2.c b/drivers/phy/meson-gxbb-usb2.c
index 7a2e3d2739e8..70a80b863819 100644
--- a/drivers/phy/meson-gxbb-usb2.c
+++ b/drivers/phy/meson-gxbb-usb2.c
@@ -12,7 +12,6 @@
#include <clk.h>
#include <dm.h>
#include <generic-phy.h>
-#include <power/regulator.h>
#include <regmap.h>
#include <reset.h>
#include <linux/bitops.h>
@@ -81,9 +80,6 @@
struct phy_meson_gxbb_usb2_priv {
struct regmap *regmap;
struct reset_ctl_bulk resets;
-#if CONFIG_IS_ENABLED(DM_REGULATOR)
- struct udevice *phy_supply;
-#endif
};
static int phy_meson_gxbb_usb2_power_on(struct phy *phy)
@@ -92,15 +88,6 @@ static int phy_meson_gxbb_usb2_power_on(struct phy *phy)
struct phy_meson_gxbb_usb2_priv *priv = dev_get_priv(dev);
uint val;
-#if CONFIG_IS_ENABLED(DM_REGULATOR)
- if (priv->phy_supply) {
- int ret = regulator_set_enable(priv->phy_supply, true);
-
- if (ret)
- return ret;
- }
-#endif
-
regmap_update_bits(priv->regmap, REG_CONFIG,
REG_CONFIG_CLK_32k_ALTSEL,
REG_CONFIG_CLK_32k_ALTSEL);
@@ -140,26 +127,8 @@ static int phy_meson_gxbb_usb2_power_on(struct phy *phy)
return 0;
}
-static int phy_meson_gxbb_usb2_power_off(struct phy *phy)
-{
-#if CONFIG_IS_ENABLED(DM_REGULATOR)
- struct udevice *dev = phy->dev;
- struct phy_meson_gxbb_usb2_priv *priv = dev_get_priv(dev);
-
- if (priv->phy_supply) {
- int ret = regulator_set_enable(priv->phy_supply, false);
-
- if (ret)
- return ret;
- }
-#endif
-
- return 0;
-}
-
static struct phy_ops meson_gxbb_usb2_phy_ops = {
.power_on = phy_meson_gxbb_usb2_power_on,
- .power_off = phy_meson_gxbb_usb2_power_off,
};
static int meson_gxbb_usb2_phy_probe(struct udevice *dev)
@@ -192,13 +161,6 @@ static int meson_gxbb_usb2_phy_probe(struct udevice *dev)
return ret;
}
-#if CONFIG_IS_ENABLED(DM_REGULATOR)
- ret = device_get_supply_regulator(dev, "phy-supply", &priv->phy_supply);
- if (ret && ret != -ENOENT) {
- pr_err("Failed to get PHY regulator\n");
- return ret;
- }
-#endif
ret = reset_get_bulk(dev, &priv->resets);
if (!ret) {
ret = reset_deassert_bulk(&priv->resets);
diff --git a/drivers/phy/meson-gxl-usb2.c b/drivers/phy/meson-gxl-usb2.c
index 9fb376cec448..4c631310efac 100644
--- a/drivers/phy/meson-gxl-usb2.c
+++ b/drivers/phy/meson-gxl-usb2.c
@@ -16,7 +16,6 @@
#include <generic-phy.h>
#include <regmap.h>
#include <linux/delay.h>
-#include <power/regulator.h>
#include <clk.h>
#include <linux/usb/otg.h>
@@ -101,9 +100,6 @@
struct phy_meson_gxl_usb2_priv {
struct regmap *regmap;
-#if CONFIG_IS_ENABLED(DM_REGULATOR)
- struct udevice *phy_supply;
-#endif
#if CONFIG_IS_ENABLED(CLK)
struct clk clk;
#endif
@@ -167,14 +163,6 @@ static int phy_meson_gxl_usb2_power_on(struct phy *phy)
phy_meson_gxl_usb2_set_mode(phy, USB_DR_MODE_HOST);
-#if CONFIG_IS_ENABLED(DM_REGULATOR)
- if (priv->phy_supply) {
- int ret = regulator_set_enable(priv->phy_supply, true);
- if (ret)
- return ret;
- }
-#endif
-
return 0;
}
@@ -189,16 +177,6 @@ static int phy_meson_gxl_usb2_power_off(struct phy *phy)
val |= U2P_R0_POWER_ON_RESET;
regmap_write(priv->regmap, U2P_R0, val);
-#if CONFIG_IS_ENABLED(DM_REGULATOR)
- if (priv->phy_supply) {
- int ret = regulator_set_enable(priv->phy_supply, false);
- if (ret) {
- pr_err("Error disabling PHY supply\n");
- return ret;
- }
- }
-#endif
-
return 0;
}
@@ -229,14 +207,6 @@ int meson_gxl_usb2_phy_probe(struct udevice *dev)
}
#endif
-#if CONFIG_IS_ENABLED(DM_REGULATOR)
- ret = device_get_supply_regulator(dev, "phy-supply", &priv->phy_supply);
- if (ret && ret != -ENOENT) {
- pr_err("Failed to get PHY regulator\n");
- return ret;
- }
-#endif
-
return 0;
}
--
2.34.1
next prev parent reply other threads:[~2023-04-19 13:41 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-19 13:40 [PATCH v5 1/6] ARM: dts: rockchip: rk3588-rock-5b-u-boot: add USB 2.0 host Eugen Hristev
2023-04-19 13:40 ` [PATCH v5 2/6] configs: rockchip: rock5b-rk3588: enable USB and regulators Eugen Hristev
2023-05-06 9:33 ` Kever Yang
2023-04-19 13:40 ` [PATCH v5 3/6] phy: add support for phy-supply Eugen Hristev
2023-05-06 9:34 ` Kever Yang
2023-04-19 13:40 ` Eugen Hristev [this message]
2023-05-06 9:36 ` [PATCH v5 4/6] phy: remove phy-supply related code Kever Yang
2023-05-09 7:53 ` neil.armstrong
2023-04-19 13:40 ` [PATCH v5 5/6] phy: rockchip-inno-usb2: add initial support for rk3588 PHY Eugen Hristev
2023-05-06 9:35 ` Kever Yang
2023-04-19 13:40 ` [PATCH v5 6/6] phy: Keep balance of counts when ops is missing Eugen Hristev
2023-05-06 9:35 ` Kever Yang
2023-05-06 9:58 ` [PATCH v5 1/6] ARM: dts: rockchip: rk3588-rock-5b-u-boot: add USB 2.0 host Kever Yang
2023-05-06 10:07 ` Kever Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230419134014.128461-4-eugen.hristev@collabora.com \
--to=eugen.hristev@collabora.com \
--cc=anarsoul@gmail.com \
--cc=jagan@edgeble.ai \
--cc=jonas@kwiboo.se \
--cc=kever.yang@rock-chips.com \
--cc=neil.armstrong@linaro.org \
--cc=u-boot-amlogic@groups.io \
--cc=u-boot@lists.denx.de \
--cc=xdrudis@tinet.cat \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox