public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Maxim Kiselev <bigunclemax@gmail.com>
To: u-boot@lists.denx.de
Cc: Maxim Kiselev <bigunclemax@gmail.com>,
	Jagan Teki <jagan@amarulasolutions.com>,
	Andre Przywara <andre.przywara@arm.com>,
	Rick Chen <rick@andestech.com>, Leo <ycliang@andestech.com>
Subject: [RFC PATCH v1 3/3] riscv: dts: allwinner: d1: Add SPI controllers node
Date: Fri, 19 May 2023 16:40:09 +0300	[thread overview]
Message-ID: <20230519134010.3102343-4-bigunclemax@gmail.com> (raw)
In-Reply-To: <20230519134010.3102343-1-bigunclemax@gmail.com>

Some boards form the MangoPi family (MQ\MQ-Dual\MQ-R) may have
an optional SPI flash that connects to the SPI0 controller.

This controller is the same for R329/D1/R528/T113s SoCs and
should be supported by the sun50i-r329-spi driver.

So let's add its DT nodes.

Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
---
 arch/riscv/dts/sunxi-d1s-t113.dtsi | 37 ++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/arch/riscv/dts/sunxi-d1s-t113.dtsi b/arch/riscv/dts/sunxi-d1s-t113.dtsi
index a7c95f59a0..094ad0e460 100644
--- a/arch/riscv/dts/sunxi-d1s-t113.dtsi
+++ b/arch/riscv/dts/sunxi-d1s-t113.dtsi
@@ -123,6 +123,12 @@
 				function = "emac";
 			};
 
+			/omit-if-no-ref/
+			spi0_pins: spi0-pins {
+				pins = "PC2", "PC3", "PC4", "PC5";
+				function = "spi0";
+			};
+
 			/omit-if-no-ref/
 			uart1_pg6_pins: uart1-pg6-pins {
 				pins = "PG6", "PG7";
@@ -456,6 +462,37 @@
 			#size-cells = <0>;
 		};
 
+		spi0: spi@4025000 {
+			compatible = "allwinner,sun20i-d1-spi",
+				     "allwinner,sun50i-r329-spi";
+			reg = <0x04025000 0x1000>;
+			interrupts = <SOC_PERIPHERAL_IRQ(15) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 22>, <&dma 22>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@4026000 {
+			compatible = "allwinner,sun20i-d1-spi-dbi",
+				     "allwinner,sun50i-r329-spi-dbi",
+				     "allwinner,sun50i-r329-spi";
+			reg = <0x04026000 0x1000>;
+			interrupts = <SOC_PERIPHERAL_IRQ(16) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 23>, <&dma 23>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_BUS_SPI1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		usb_otg: usb@4100000 {
 			compatible = "allwinner,sun20i-d1-musb",
 				     "allwinner,sun8i-a33-musb";
-- 
2.39.2


  parent reply	other threads:[~2023-05-19 13:41 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-19 13:40 [RFC PATCH v1 0/3] Allwinner R329/D1/R528/T113s SPI support Maxim Kiselev
2023-05-19 13:40 ` [RFC PATCH v1 1/3] sunxi: SPL SPI: Add SPI boot support for the Allwinner R528/T113 SoCs Maxim Kiselev
2023-06-05 21:07   ` Sam Edwards
2023-05-19 13:40 ` [RFC PATCH v1 2/3] spi: sunxi: Add support for R329/D1/R528/T113 SPI controller Maxim Kiselev
2023-05-24  0:14   ` Sam Edwards
2023-05-24 12:50     ` Maksim Kiselev
2023-05-19 13:40 ` Maxim Kiselev [this message]
2023-05-24  0:09   ` [RFC PATCH v1 3/3] riscv: dts: allwinner: d1: Add SPI controllers node Sam Edwards

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230519134010.3102343-4-bigunclemax@gmail.com \
    --to=bigunclemax@gmail.com \
    --cc=andre.przywara@arm.com \
    --cc=jagan@amarulasolutions.com \
    --cc=rick@andestech.com \
    --cc=u-boot@lists.denx.de \
    --cc=ycliang@andestech.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox