[PATCH 0/5] ARM: dts: at91: Improve sam9x60-curiosity

[Alexander Dahl <post@lespocky.de>]

Hello everyone,

currently I have the Microchip SAM9X60-Curiosity board on my desk and
for evaluation purposes I'm trying to get it booting from NAND flash
without SD card.  This series contains a collection of patches I made on
that journey.  It's probably not the last set of patches, but I send it
out now before my holidays so anyone who's interested has some time to
look into it before I return to my desk in roughly two weeks. ;-)

Note: while I could access the I²C EEPROM populated on that board with
Linux v6.4 through nvmem and the 100 bytes content seem valid including
a MAC address attributed to Microchip, I could not do so in U-Boot.
That also means out of the box access to Ethernet is currently broken
without valid MAC address.

Note: I prepared the patches at the office, but sending them from home
now.  This is why I use two different mail addresses.

Greets
Alex

Alexander Dahl (5):
  ARM: dts: at91: sam9x60: Better align with upstream dtsi
  ARM: dts: at91: sam9x60-curiosity: Fix EEPROM type
  ARM: dts: at91: sam9x60: Change i2c compatible
  ARM: dts: at91: sam9x60-curiosity: Improve alignment with upstream
  ARM: dts: at91: sam9x60-curiosity: Add raw NAND flash

 .../dts/at91-sam9x60_curiosity-u-boot.dtsi    |   8 +-
 arch/arm/dts/at91-sam9x60_curiosity.dts       | 203 +++++++++++++-----
 arch/arm/dts/sam9x60.dtsi                     |  66 +++---
 arch/arm/dts/sam9x60ek.dts                    |   2 +-
 4 files changed, 190 insertions(+), 89 deletions(-)


base-commit: e1bebc16e1d9aa0ddd56c53c0b781f7186dce557
-- 
2.30.2