[PATCH 1/5] ARM: dts: at91: sam9x60: Better align with upstream dtsi

[Alexander Dahl <post@lespocky.de>]

From: Alexander Dahl <ada@thorsis.com>

No functional changes, but this:

- reorder nodes (ordered by memory offset as in Linux)
- add label to pinctrl node name for easier reference in board files
- fix whitespace

Diff to sam9x60.dtsi in Linux is much better readable now.

Signed-off-by: Alexander Dahl <ada@thorsis.com>
---
 arch/arm/dts/sam9x60.dtsi | 66 +++++++++++++++++++--------------------
 1 file changed, 33 insertions(+), 33 deletions(-)

diff --git a/arch/arm/dts/sam9x60.dtsi b/arch/arm/dts/sam9x60.dtsi
index 2b93d08938..3b684fc63d 100644
--- a/arch/arm/dts/sam9x60.dtsi
+++ b/arch/arm/dts/sam9x60.dtsi
@@ -27,6 +27,18 @@
 		spi0 = &qspi;
 	};
 
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ARM9260_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,arm926ej-s";
+			clocks = <&pmc PMC_TYPE_CORE 19>, <&pmc PMC_TYPE_CORE 11>, <&main_xtal>;
+			clock-names = "cpu", "master", "xtal";
+		};
+	};
+
 	clocks {
 		slow_rc_osc: slow_rc_osc {
 			compatible = "fixed-clock";
@@ -51,18 +63,6 @@
 		};
 	};
 
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ARM9260_0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,arm926ej-s";
-			clocks = <&pmc PMC_TYPE_CORE 19>, <&pmc PMC_TYPE_CORE 11>, <&main_xtal>;
-			clock-names = "cpu", "master", "xtal";
-		};
-	};
-
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -149,13 +149,20 @@
 				compatible = "microchip,sam9x60-qspi";
 				reg = <0xf0014000 0x100>, <0x70000000 0x10000000>;
 				reg-names = "qspi_base", "qspi_mmap";
-				clocks =  <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_SYSTEM 18>; /* ID_QSPI */
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_SYSTEM 18>; /* ID_QSPI */
 				clock-names = "pclk", "qspick";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
 			};
 
+			pit64b0: timer@f0028000 {
+				compatible = "microchip,sam9x60-pit64b";
+				reg = <0xf0028000 0xec>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 37>, <&pmc PMC_TYPE_GCK 37>;
+				clock-names = "pclk", "gclk";
+			};
+
 			flx0: flexcom@f801c600 {
 				compatible = "atmel,sama5d2-flexcom";
 				reg = <0xf801c000 0x200>;
@@ -181,6 +188,17 @@
 				reg = <0xf8050000 0x100>;
 			};
 
+			pmecc: ecc-engine@ffffe000 {
+				compatible = "microchip,sam9x60-pmecc", "atmel,at91sam9g45-pmecc";
+				reg = <0xffffe000 0x300>,
+				      <0xffffe600 0x100>;
+			};
+
+			smc: smc@ffffea00 {
+				compatible = "microchip,sam9x60-smc", "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffea00 0x100>;
+			};
+
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
@@ -190,7 +208,7 @@
 				clock-names = "usart";
 			};
 
-			pinctrl {
+			pinctrl: pinctrl@fffff400 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "microchip,sam9x60-pinctrl", "simple-bus";
@@ -205,7 +223,7 @@
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
 							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
-							AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 					};
 				};
 
@@ -256,17 +274,6 @@
 				};
 			};
 
-			pmecc: ecc-engine@ffffe000 {
-				compatible = "microchip,sam9x60-pmecc", "atmel,at91sam9g45-pmecc";
-				reg = <0xffffe000 0x300>,
-				      <0xffffe600 0x100>;
-			};
-
-			smc: smc@ffffea00 {
-				compatible = "microchip,sam9x60-smc", "atmel,at91sam9260-smc", "syscon";
-				reg = <0xffffea00 0x100>;
-			};
-
 			pioA: gpio@fffff400 {
 				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 				reg = <0xfffff400 0x200>;
@@ -320,13 +327,6 @@
 				clocks = <&pmc PMC_TYPE_CORE 11>; /* ID_MCK. */
 			};
 
-			pit64b0: timer@f0028000 {
-				compatible = "microchip,sam9x60-pit64b";
-				reg = <0xf0028000 0xec>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 37>, <&pmc PMC_TYPE_GCK 37>;
-				clock-names = "pclk", "gclk";
-			};
-
 			clk32: sckc@fffffe50 {
 				compatible = "microchip,sam9x60-sckc";
 				reg = <0xfffffe50 0x4>;
-- 
2.30.2