From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from phobos.denx.de (phobos.denx.de [85.214.62.61]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 9ED4AEB64D9 for ; Mon, 10 Jul 2023 14:56:38 +0000 (UTC) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 61A778670F; Mon, 10 Jul 2023 16:56:24 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=kernel.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=pass (2048-bit key; unprotected) header.d=kernel.org header.i=@kernel.org header.b="BOZZf6zG"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id 6D71886700; Mon, 10 Jul 2023 16:56:22 +0200 (CEST) Received: from dfw.source.kernel.org (dfw.source.kernel.org [IPv6:2604:1380:4641:c500::1]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id 3930886632 for ; Mon, 10 Jul 2023 16:56:17 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=kernel.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=rogerq@kernel.org Received: from smtp.kernel.org (relay.kernel.org [52.25.139.140]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (2048 bits)) (No client certificate requested) by dfw.source.kernel.org (Postfix) with ESMTPS id D404D6104B; Mon, 10 Jul 2023 14:56:15 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPSA id 7D284C433C8; Mon, 10 Jul 2023 14:56:13 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1689000975; bh=q69UDuf1Lf01iW1l+S5rDXByF+o0Xc2bTOBaGlZgcs8=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=BOZZf6zGBATnuqE/tY64X1ILrvS8pk4Rk1BlwDOhDUaVkxPzR8naycjUC8F4zEyc4 nVt83aNtu+KfBiuWwJWrjW8wE4wCoGT9v7+sNapOE7P2YI4Cvb27wXrXu2Nfr2g0ec 4BcOBB0k7HlqPm4HFOHRTotc+A2f3YnVhLTFL5oHeXxjPCZuIFoHbfsuErxb10gtw1 4Bbg/0Rod1bfS/deJ3f+KsPN2GlupDWhNb+5oTlKGkslgDrMjn4Chqiu+AOljha/9q I3HiLY8d68d+UEup64IVQheJMk1Ypon04JDQDSOsU1pyIpt6TuqKiSNd3/7jG1htJg dgW5ef5NSLylA== From: Roger Quadros To: nm@ti.com, vigneshr@ti.com, trini@konsulko.com Cc: srk@ti.com, u-boot@lists.denx.de, Roger Quadros Subject: [PATCH 1/2] arm: dts: k3-am64: Sync DT with Linux Date: Mon, 10 Jul 2023 17:56:06 +0300 Message-Id: <20230710145607.128725-2-rogerq@kernel.org> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20230710145607.128725-1-rogerq@kernel.org> References: <20230710145607.128725-1-rogerq@kernel.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de X-Virus-Status: Clean Sync all am642-evm/am642-sk related DT files with Linux. Signed-off-by: Roger Quadros --- arch/arm/dts/k3-am64-main.dtsi | 171 +++++++++++++++++++++++-- arch/arm/dts/k3-am64-mcu.dtsi | 53 +++++++- arch/arm/dts/k3-am64-thermal.dtsi | 33 +++++ arch/arm/dts/k3-am64.dtsi | 22 +--- arch/arm/dts/k3-am642-evm-u-boot.dtsi | 10 +- arch/arm/dts/k3-am642-evm.dts | 173 ++++++++++++++++++++------ arch/arm/dts/k3-am642-sk-u-boot.dtsi | 10 +- arch/arm/dts/k3-am642-sk.dts | 166 +++++++++++++++++------- arch/arm/dts/k3-am642.dtsi | 1 + arch/arm/dts/k3-pinctrl.h | 53 ++++++++ 10 files changed, 566 insertions(+), 126 deletions(-) create mode 100644 arch/arm/dts/k3-am64-thermal.dtsi create mode 100644 arch/arm/dts/k3-pinctrl.h diff --git a/arch/arm/dts/k3-am64-main.dtsi b/arch/arm/dts/k3-am64-main.dtsi index 5e8036f32d..1664d9f024 100644 --- a/arch/arm/dts/k3-am64-main.dtsi +++ b/arch/arm/dts/k3-am64-main.dtsi @@ -228,12 +228,161 @@ }; }; + main_timer0: timer@2400000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2400000 0x00 0x400>; + interrupts = ; + clocks = <&k3_clks 36 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 36 1>; + assigned-clock-parents = <&k3_clks 36 2>; + power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer1: timer@2410000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2410000 0x00 0x400>; + interrupts = ; + clocks = <&k3_clks 37 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 37 1>; + assigned-clock-parents = <&k3_clks 37 2>; + power-domains = <&k3_pds 37 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer2: timer@2420000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2420000 0x00 0x400>; + interrupts = ; + clocks = <&k3_clks 38 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 38 1>; + assigned-clock-parents = <&k3_clks 38 2>; + power-domains = <&k3_pds 38 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer3: timer@2430000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2430000 0x00 0x400>; + interrupts = ; + clocks = <&k3_clks 39 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 39 1>; + assigned-clock-parents = <&k3_clks 39 2>; + power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer4: timer@2440000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2440000 0x00 0x400>; + interrupts = ; + clocks = <&k3_clks 40 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 40 1>; + assigned-clock-parents = <&k3_clks 40 2>; + power-domains = <&k3_pds 40 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer5: timer@2450000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2450000 0x00 0x400>; + interrupts = ; + clocks = <&k3_clks 41 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 41 1>; + assigned-clock-parents = <&k3_clks 41 2>; + power-domains = <&k3_pds 41 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer6: timer@2460000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2460000 0x00 0x400>; + interrupts = ; + clocks = <&k3_clks 42 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 42 1>; + assigned-clock-parents = <&k3_clks 42 2>; + power-domains = <&k3_pds 42 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer7: timer@2470000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2470000 0x00 0x400>; + interrupts = ; + clocks = <&k3_clks 43 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 43 1>; + assigned-clock-parents = <&k3_clks 43 2>; + power-domains = <&k3_pds 43 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer8: timer@2480000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2480000 0x00 0x400>; + interrupts = ; + clocks = <&k3_clks 44 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 44 1>; + assigned-clock-parents = <&k3_clks 44 2>; + power-domains = <&k3_pds 44 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer9: timer@2490000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x2490000 0x00 0x400>; + interrupts = ; + clocks = <&k3_clks 45 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 45 1>; + assigned-clock-parents = <&k3_clks 45 2>; + power-domains = <&k3_pds 45 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer10: timer@24a0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24a0000 0x00 0x400>; + interrupts = ; + clocks = <&k3_clks 46 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 46 1>; + assigned-clock-parents = <&k3_clks 46 2>; + power-domains = <&k3_pds 46 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_timer11: timer@24b0000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x24b0000 0x00 0x400>; + interrupts = ; + clocks = <&k3_clks 47 1>; + clock-names = "fck"; + assigned-clocks = <&k3_clks 47 1>; + assigned-clock-parents = <&k3_clks 47 2>; + power-domains = <&k3_pds 47 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + }; + + main_esm: esm@420000 { + compatible = "ti,j721e-esm"; + reg = <0x00 0x420000 0x00 0x1000>; + ti,esm-pins = <160>, <161>; + }; + main_uart0: serial@2800000 { compatible = "ti,am64-uart", "ti,am654-uart"; reg = <0x00 0x02800000 0x00 0x100>; interrupts = ; clock-frequency = <48000000>; - current-speed = <115200>; power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 146 0>; clock-names = "fclk"; @@ -245,7 +394,6 @@ reg = <0x00 0x02810000 0x00 0x100>; interrupts = ; clock-frequency = <48000000>; - current-speed = <115200>; power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 152 0>; clock-names = "fclk"; @@ -257,7 +405,6 @@ reg = <0x00 0x02820000 0x00 0x100>; interrupts = ; clock-frequency = <48000000>; - current-speed = <115200>; power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 153 0>; clock-names = "fclk"; @@ -269,7 +416,6 @@ reg = <0x00 0x02830000 0x00 0x100>; interrupts = ; clock-frequency = <48000000>; - current-speed = <115200>; power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 154 0>; clock-names = "fclk"; @@ -281,7 +427,6 @@ reg = <0x00 0x02840000 0x00 0x100>; interrupts = ; clock-frequency = <48000000>; - current-speed = <115200>; power-domains = <&k3_pds 155 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 155 0>; clock-names = "fclk"; @@ -293,7 +438,6 @@ reg = <0x00 0x02850000 0x00 0x100>; interrupts = ; clock-frequency = <48000000>; - current-speed = <115200>; power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 156 0>; clock-names = "fclk"; @@ -305,7 +449,6 @@ reg = <0x00 0x02860000 0x00 0x100>; interrupts = ; clock-frequency = <48000000>; - current-speed = <115200>; power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 158 0>; clock-names = "fclk"; @@ -676,6 +819,7 @@ #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <16>; + status = "disabled"; }; mailbox0_cluster3: mailbox@29030000 { @@ -686,6 +830,7 @@ #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <16>; + status = "disabled"; }; mailbox0_cluster4: mailbox@29040000 { @@ -696,6 +841,7 @@ #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <16>; + status = "disabled"; }; mailbox0_cluster5: mailbox@29050000 { @@ -706,6 +852,7 @@ #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <16>; + status = "disabled"; }; mailbox0_cluster6: mailbox@29060000 { @@ -715,6 +862,7 @@ #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <16>; + status = "disabled"; }; mailbox0_cluster7: mailbox@29070000 { @@ -724,6 +872,7 @@ #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <16>; + status = "disabled"; }; main_r5fss0: r5fss@78000000 { @@ -1392,4 +1541,12 @@ clock-names = "fck"; status = "disabled"; }; + + main_vtm0: temperature-sensor@b00000 { + compatible = "ti,j7200-vtm"; + reg = <0x00 0xb00000 0x00 0x400>, + <0x00 0xb01000 0x00 0x400>; + power-domains = <&k3_pds 95 TI_SCI_PD_EXCLUSIVE>; + #thermal-sensor-cells = <1>; + }; }; diff --git a/arch/arm/dts/k3-am64-mcu.dtsi b/arch/arm/dts/k3-am64-mcu.dtsi index 38ddf0b3b8..686d497907 100644 --- a/arch/arm/dts/k3-am64-mcu.dtsi +++ b/arch/arm/dts/k3-am64-mcu.dtsi @@ -6,11 +6,55 @@ */ &cbass_mcu { + /* + * The MCU domain timer interrupts are routed only to the ESM module, + * and not currently available for Linux. The MCU domain timers are + * of limited use without interrupts, and likely reserved by the ESM. + */ + mcu_timer0: timer@4800000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x4800000 0x00 0x400>; + clocks = <&k3_clks 35 1>; + clock-names = "fck"; + power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + status = "reserved"; + }; + + mcu_timer1: timer@4810000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x4810000 0x00 0x400>; + clocks = <&k3_clks 48 1>; + clock-names = "fck"; + power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + status = "reserved"; + }; + + mcu_timer2: timer@4820000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x4820000 0x00 0x400>; + clocks = <&k3_clks 49 1>; + clock-names = "fck"; + power-domains = <&k3_pds 49 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + status = "reserved"; + }; + + mcu_timer3: timer@4830000 { + compatible = "ti,am654-timer"; + reg = <0x00 0x4830000 0x00 0x400>; + clocks = <&k3_clks 50 1>; + clock-names = "fck"; + power-domains = <&k3_pds 50 TI_SCI_PD_EXCLUSIVE>; + ti,timer-pwm; + status = "reserved"; + }; + mcu_uart0: serial@4a00000 { compatible = "ti,am64-uart", "ti,am654-uart"; reg = <0x00 0x04a00000 0x00 0x100>; interrupts = ; - current-speed = <115200>; power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 149 0>; clock-names = "fclk"; @@ -21,7 +65,6 @@ compatible = "ti,am64-uart", "ti,am654-uart"; reg = <0x00 0x04a10000 0x00 0x100>; interrupts = ; - current-speed = <115200>; power-domains = <&k3_pds 160 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 160 0>; clock-names = "fclk"; @@ -109,4 +152,10 @@ pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0xffffffff>; }; + + mcu_esm: esm@4100000 { + compatible = "ti,j721e-esm"; + reg = <0x00 0x4100000 0x00 0x1000>; + ti,esm-pins = <0>, <1>; + }; }; diff --git a/arch/arm/dts/k3-am64-thermal.dtsi b/arch/arm/dts/k3-am64-thermal.dtsi new file mode 100644 index 0000000000..036db56ba7 --- /dev/null +++ b/arch/arm/dts/k3-am64-thermal.dtsi @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include + +thermal_zones: thermal-zones { + main0_thermal: main0-thermal { + polling-delay-passive = <250>; /* milliSeconds */ + polling-delay = <500>; /* milliSeconds */ + thermal-sensors = <&main_vtm0 0>; + + trips { + main0_crit: main0-crit { + temperature = <105000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; + + main1_thermal: main1-thermal { + polling-delay-passive = <250>; /* milliSeconds */ + polling-delay = <500>; /* milliSeconds */ + thermal-sensors = <&main_vtm0 1>; + + trips { + main1_crit: main1-crit { + temperature = <105000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; +}; diff --git a/arch/arm/dts/k3-am64.dtsi b/arch/arm/dts/k3-am64.dtsi index c858725133..8e9c2bc70f 100644 --- a/arch/arm/dts/k3-am64.dtsi +++ b/arch/arm/dts/k3-am64.dtsi @@ -8,9 +8,10 @@ #include #include #include -#include #include +#include "k3-pinctrl.h" + / { model = "Texas Instruments K3 AM642 SoC"; compatible = "ti,am642"; @@ -18,22 +19,6 @@ #address-cells = <2>; #size-cells = <2>; - aliases { - serial0 = &mcu_uart0; - serial1 = &mcu_uart1; - serial2 = &main_uart0; - serial3 = &main_uart1; - serial4 = &main_uart2; - serial5 = &main_uart3; - serial6 = &main_uart4; - serial7 = &main_uart5; - serial8 = &main_uart6; - ethernet0 = &cpsw_port1; - ethernet1 = &cpsw_port2; - mmc0 = &sdhci0; - mmc1 = &sdhci1; - }; - chosen { }; firmware { @@ -69,6 +54,7 @@ <0x00 0x00420000 0x00 0x00420000 0x00 0x00001000>, /* ESM0 */ <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */ <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* Timesync router */ + <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */ <0x00 0x01000000 0x00 0x01000000 0x00 0x02330400>, /* First peripheral window */ <0x00 0x08000000 0x00 0x08000000 0x00 0x00200000>, /* Main CPSW */ <0x00 0x0d000000 0x00 0x0d000000 0x00 0x00800000>, /* PCIE_CORE */ @@ -105,6 +91,8 @@ ranges = <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>; /* Peripheral window */ }; }; + + #include "k3-am64-thermal.dtsi" }; /* Now include the peripherals for each bus segments */ diff --git a/arch/arm/dts/k3-am642-evm-u-boot.dtsi b/arch/arm/dts/k3-am642-evm-u-boot.dtsi index 64857b0909..373ee8da71 100644 --- a/arch/arm/dts/k3-am642-evm-u-boot.dtsi +++ b/arch/arm/dts/k3-am642-evm-u-boot.dtsi @@ -34,21 +34,13 @@ &main_pmx0 { bootph-pre-ram; - main_i2c0_pins_default: main-i2c0-pins-default { + main-i2c0-pins-default { bootph-pre-ram; - pinctrl-single,pins = < - AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0) /* (A18) I2C0_SCL */ - AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */ - >; }; }; &main_i2c0 { - status = "okay"; bootph-pre-ram; - pinctrl-names = "default"; - pinctrl-0 = <&main_i2c0_pins_default>; - clock-frequency = <400000>; }; &main_uart0 { diff --git a/arch/arm/dts/k3-am642-evm.dts b/arch/arm/dts/k3-am642-evm.dts index 39feea78a0..15c282c934 100644 --- a/arch/arm/dts/k3-am642-evm.dts +++ b/arch/arm/dts/k3-am642-evm.dts @@ -17,15 +17,26 @@ model = "Texas Instruments AM642 EVM"; chosen { - stdout-path = "serial2:115200n8"; - bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000"; + stdout-path = &main_uart0; + }; + + aliases { + serial0 = &mcu_uart0; + serial1 = &main_uart1; + serial2 = &main_uart0; + serial3 = &main_uart3; + i2c0 = &main_i2c0; + i2c1 = &main_i2c1; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + ethernet0 = &cpsw_port1; + ethernet1 = &cpsw_port2; }; memory@80000000 { device_type = "memory"; /* 2G RAM */ reg = <0x00000000 0x80000000 0x00000000 0x80000000>; - }; reserved-memory { @@ -94,7 +105,7 @@ }; }; - evm_12v0: fixedregulator-evm12v0 { + evm_12v0: regulator-0 { /* main DC jack */ compatible = "regulator-fixed"; regulator-name = "evm_12v0"; @@ -104,7 +115,7 @@ regulator-boot-on; }; - vsys_5v0: fixedregulator-vsys5v0 { + vsys_5v0: regulator-1 { /* output of LM5140 */ compatible = "regulator-fixed"; regulator-name = "vsys_5v0"; @@ -115,7 +126,7 @@ regulator-boot-on; }; - vsys_3v3: fixedregulator-vsys3v3 { + vsys_3v3: regulator-2 { /* output of LM5140 */ compatible = "regulator-fixed"; regulator-name = "vsys_3v3"; @@ -126,7 +137,7 @@ regulator-boot-on; }; - vdd_mmc1: fixed-regulator-sd { + vdd_mmc1: regulator-3 { /* TPS2051BD */ compatible = "regulator-fixed"; regulator-name = "vdd_mmc1"; @@ -138,7 +149,7 @@ gpio = <&exp1 6 GPIO_ACTIVE_HIGH>; }; - vddb: fixedregulator-vddb { + vddb: regulator-4 { compatible = "regulator-fixed"; regulator-name = "vddb_3v3_display"; regulator-min-microvolt = <3300000>; @@ -148,6 +159,20 @@ regulator-boot-on; }; + vtt_supply: regulator-5 { + compatible = "regulator-fixed"; + regulator-name = "vtt"; + pinctrl-names = "default"; + pinctrl-0 = <&ddr_vtt_pins_default>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&main_gpio0 12 GPIO_ACTIVE_HIGH>; + vin-supply = <&vsys_3v3>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + }; + leds { compatible = "gpio-leds"; @@ -201,7 +226,7 @@ }; &main_pmx0 { - main_mmc1_pins_default: main-mmc1-pins-default { + main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0) /* (J19) MMC1_CMD */ AM64X_IOPAD(0x028c, PIN_INPUT_PULLDOWN, 0) /* (L20) MMC1_CLK */ @@ -215,7 +240,16 @@ >; }; - main_uart0_pins_default: main-uart0-pins-default { + main_uart1_pins_default: main-uart1-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x0248, PIN_INPUT, 0) /* (D16) UART1_CTSn */ + AM64X_IOPAD(0x024c, PIN_OUTPUT, 0) /* (E16) UART1_RTSn */ + AM64X_IOPAD(0x0240, PIN_INPUT, 0) /* (E15) UART1_RXD */ + AM64X_IOPAD(0x0244, PIN_OUTPUT, 0) /* (E14) UART1_TXD */ + >; + }; + + main_uart0_pins_default: main-uart0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */ AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */ @@ -224,7 +258,7 @@ >; }; - main_spi0_pins_default: main-spi0-pins-default { + main_spi0_pins_default: main-spi0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0210, PIN_INPUT, 0) /* (D13) SPI0_CLK */ AM64X_IOPAD(0x0208, PIN_OUTPUT, 0) /* (D12) SPI0_CS0 */ @@ -233,21 +267,28 @@ >; }; - main_i2c1_pins_default: main-i2c1-pins-default { + main_i2c0_pins_default: main-i2c0-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0) /* (A18) I2C0_SCL */ + AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */ + >; + }; + + main_i2c1_pins_default: main-i2c1-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */ AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */ >; }; - mdio1_pins_default: mdio1-pins-default { + mdio1_pins_default: mdio1-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */ AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */ >; }; - rgmii1_pins_default: rgmii1-pins-default { + rgmii1_pins_default: rgmii1-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x01cc, PIN_INPUT, 4) /* (W5) PRG0_PRU1_GPO7.RGMII1_RD0 */ AM64X_IOPAD(0x01d4, PIN_INPUT, 4) /* (Y5) PRG0_PRU1_GPO9.RGMII1_RD1 */ @@ -264,7 +305,7 @@ >; }; - rgmii2_pins_default: rgmii2-pins-default { + rgmii2_pins_default: rgmii2-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0108, PIN_INPUT, 4) /* (W11) PRG1_PRU1_GPO0.RGMII2_RD0 */ AM64X_IOPAD(0x010c, PIN_INPUT, 4) /* (V11) PRG1_PRU1_GPO1.RGMII2_RD1 */ @@ -281,13 +322,13 @@ >; }; - main_usb0_pins_default: main-usb0-pins-default { + main_usb0_pins_default: main-usb0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */ >; }; - ospi0_pins_default: ospi0-pins-default { + ospi0_pins_default: ospi0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0000, PIN_OUTPUT, 0) /* (N20) OSPI0_CLK */ AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (L19) OSPI0_CSn0 */ @@ -303,36 +344,58 @@ >; }; - main_ecap0_pins_default: main-ecap0-pins-default { + main_ecap0_pins_default: main-ecap0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0270, PIN_INPUT, 0) /* (D18) ECAP0_IN_APWM_OUT */ >; }; - main_mcan0_pins_default: main-mcan0-pins-default { + main_mcan0_pins_default: main-mcan0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0254, PIN_INPUT, 0) /* (B17) MCAN0_RX */ AM64X_IOPAD(0x0250, PIN_OUTPUT, 0) /* (A17) MCAN0_TX */ >; }; - main_mcan1_pins_default: main-mcan1-pins-default { + main_mcan1_pins_default: main-mcan1-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x025c, PIN_INPUT, 0) /* (D17) MCAN1_RX */ AM64X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (C17) MCAN1_TX */ >; }; + + ddr_vtt_pins_default: ddr-vtt-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x0030, PIN_OUTPUT_PULLUP, 7) /* (L18) OSPI0_CSN1.GPIO0_12 */ + >; + }; }; &main_uart0 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_uart0_pins_default>; + current-speed = <115200>; }; /* main_uart1 is reserved for firmware usage */ &main_uart1 { status = "reserved"; + pinctrl-names = "default"; + pinctrl-0 = <&main_uart1_pins_default>; +}; + +&main_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_pins_default>; + clock-frequency = <400000>; + + eeprom@50 { + /* AT24CM01 */ + compatible = "atmel,24c1024"; + reg = <0x50>; + }; }; &main_i2c1 { @@ -425,8 +488,7 @@ &cpsw3g { pinctrl-names = "default"; - pinctrl-0 = <&rgmii1_pins_default - &rgmii2_pins_default>; + pinctrl-0 = <&rgmii1_pins_default>, <&rgmii2_pins_default>; }; &cpsw_port1 { @@ -471,10 +533,53 @@ cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ospi.tiboot3"; + reg = <0x0 0x100000>; + }; + + partition@100000 { + label = "ospi.tispl"; + reg = <0x100000 0x200000>; + }; + + partition@300000 { + label = "ospi.u-boot"; + reg = <0x300000 0x400000>; + }; + + partition@700000 { + label = "ospi.env"; + reg = <0x700000 0x40000>; + }; + + partition@740000 { + label = "ospi.env.backup"; + reg = <0x740000 0x40000>; + }; + + partition@800000 { + label = "ospi.rootfs"; + reg = <0x800000 0x37c0000>; + }; + + partition@3fc0000 { + label = "ospi.phypattern"; + reg = <0x3fc0000 0x40000>; + }; + }; }; }; &mailbox0_cluster2 { + status = "okay"; + mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { ti,mbox-rx = <0 0 2>; ti,mbox-tx = <1 0 2>; @@ -486,11 +591,9 @@ }; }; -&mailbox0_cluster3 { - status = "disabled"; -}; - &mailbox0_cluster4 { + status = "okay"; + mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { ti,mbox-rx = <0 0 2>; ti,mbox-tx = <1 0 2>; @@ -502,41 +605,35 @@ }; }; -&mailbox0_cluster5 { - status = "disabled"; -}; - &mailbox0_cluster6 { + status = "okay"; + mbox_m4_0: mbox-m4-0 { ti,mbox-rx = <0 0 2>; ti,mbox-tx = <1 0 2>; }; }; -&mailbox0_cluster7 { - status = "disabled"; -}; - &main_r5fss0_core0 { - mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>; + mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss0_core0>; memory-region = <&main_r5fss0_core0_dma_memory_region>, <&main_r5fss0_core0_memory_region>; }; &main_r5fss0_core1 { - mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>; + mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss0_core1>; memory-region = <&main_r5fss0_core1_dma_memory_region>, <&main_r5fss0_core1_memory_region>; }; &main_r5fss1_core0 { - mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>; + mboxes = <&mailbox0_cluster4>, <&mbox_main_r5fss1_core0>; memory-region = <&main_r5fss1_core0_dma_memory_region>, <&main_r5fss1_core0_memory_region>; }; &main_r5fss1_core1 { - mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>; + mboxes = <&mailbox0_cluster4>, <&mbox_main_r5fss1_core1>; memory-region = <&main_r5fss1_core1_dma_memory_region>, <&main_r5fss1_core1_memory_region>; }; diff --git a/arch/arm/dts/k3-am642-sk-u-boot.dtsi b/arch/arm/dts/k3-am642-sk-u-boot.dtsi index 69dbe943bd..45e415dbbe 100644 --- a/arch/arm/dts/k3-am642-sk-u-boot.dtsi +++ b/arch/arm/dts/k3-am642-sk-u-boot.dtsi @@ -38,21 +38,15 @@ &main_pmx0 { bootph-pre-ram; - main_i2c0_pins_default: main-i2c0-pins-default { + main-i2c0-pins-default { bootph-pre-ram; - pinctrl-single,pins = < - AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0) /* (A18) I2C0_SCL */ - AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */ - >; }; }; &main_i2c0 { bootph-pre-ram; - pinctrl-names = "default"; - pinctrl-0 = <&main_i2c0_pins_default>; - clock-frequency = <400000>; + /* FIXME: Drop the PMIC node once in k3-am642-sk.dts */ tps65219: pmic@30 { compatible = "ti,tps65219"; reg = <0x30>; diff --git a/arch/arm/dts/k3-am642-sk.dts b/arch/arm/dts/k3-am642-sk.dts index 2e2d40da36..cbce43dbe3 100644 --- a/arch/arm/dts/k3-am642-sk.dts +++ b/arch/arm/dts/k3-am642-sk.dts @@ -17,15 +17,25 @@ model = "Texas Instruments AM642 SK"; chosen { - stdout-path = "serial2:115200n8"; - bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000"; + stdout-path = &main_uart0; + }; + + aliases { + serial0 = &mcu_uart0; + serial1 = &main_uart1; + serial2 = &main_uart0; + i2c0 = &main_i2c0; + i2c1 = &main_i2c1; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + ethernet0 = &cpsw_port1; + ethernet1 = &cpsw_port2; }; memory@80000000 { device_type = "memory"; /* 2G RAM */ reg = <0x00000000 0x80000000 0x00000000 0x80000000>; - }; reserved-memory { @@ -94,7 +104,7 @@ }; }; - vusb_main: fixed-regulator-vusb-main5v0 { + vusb_main: regulator-0 { /* USB MAIN INPUT 5V DC */ compatible = "regulator-fixed"; regulator-name = "vusb_main5v0"; @@ -104,7 +114,7 @@ regulator-boot-on; }; - vcc_3v3_sys: fixedregulator-vcc-3v3-sys { + vcc_3v3_sys: regulator-1 { /* output of LP8733xx */ compatible = "regulator-fixed"; regulator-name = "vcc_3v3_sys"; @@ -115,7 +125,7 @@ regulator-boot-on; }; - vdd_mmc1: fixed-regulator-sd { + vdd_mmc1: regulator-2 { /* TPS2051BD */ compatible = "regulator-fixed"; regulator-name = "vdd_mmc1"; @@ -127,7 +137,7 @@ gpio = <&exp1 3 GPIO_ACTIVE_HIGH>; }; - com8_ls_en: regulator-1 { + com8_ls_en: regulator-3 { compatible = "regulator-fixed"; regulator-name = "com8_ls_en"; regulator-min-microvolt = <3300000>; @@ -139,7 +149,7 @@ gpio = <&main_gpio0 62 GPIO_ACTIVE_LOW>; }; - wlan_en: regulator-2 { + wlan_en: regulator-4 { /* output of SN74AVC4T245RSVR */ compatible = "regulator-fixed"; regulator-name = "wlan_en"; @@ -222,20 +232,21 @@ }; &main_pmx0 { - main_mmc1_pins_default: main-mmc1-pins-default { + main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < - AM64X_IOPAD(0x0294, PIN_INPUT, 0) /* (J19) MMC1_CMD */ + AM64X_IOPAD(0x029c, PIN_INPUT_PULLUP, 0) /* (C20) MMC1_SDWP */ + AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0) /* (D19) MMC1_SDCD */ + AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0) /* (J19) MMC1_CMD */ AM64X_IOPAD(0x0290, PIN_INPUT, 0) /* (#N/A) MMC1_CLKLB */ - AM64X_IOPAD(0x028c, PIN_INPUT, 0) /* (L20) MMC1_CLK */ - AM64X_IOPAD(0x0288, PIN_INPUT, 0) /* (K21) MMC1_DAT0 */ - AM64X_IOPAD(0x0284, PIN_INPUT, 0) /* (L21) MMC1_DAT1 */ - AM64X_IOPAD(0x0280, PIN_INPUT, 0) /* (K19) MMC1_DAT2 */ - AM64X_IOPAD(0x027c, PIN_INPUT, 0) /* (K18) MMC1_DAT3 */ - AM64X_IOPAD(0x0298, PIN_INPUT, 0) /* (D19) MMC1_SDCD */ + AM64X_IOPAD(0x028c, PIN_INPUT_PULLDOWN, 0) /* (L20) MMC1_CLK */ + AM64X_IOPAD(0x0288, PIN_INPUT_PULLUP, 0) /* (K21) MMC1_DAT0 */ + AM64X_IOPAD(0x0284, PIN_INPUT_PULLUP, 0) /* (L21) MMC1_DAT1 */ + AM64X_IOPAD(0x0280, PIN_INPUT_PULLUP, 0) /* (K19) MMC1_DAT2 */ + AM64X_IOPAD(0x027c, PIN_INPUT_PULLUP, 0) /* (K18) MMC1_DAT3 */ >; }; - main_uart0_pins_default: main-uart0-pins-default { + main_uart0_pins_default: main-uart0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */ AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */ @@ -244,27 +255,43 @@ >; }; - main_usb0_pins_default: main-usb0-pins-default { + main_uart1_pins_default: main-uart1-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x0248, PIN_INPUT, 0) /* (D16) UART1_CTSn */ + AM64X_IOPAD(0x024c, PIN_OUTPUT, 0) /* (E16) UART1_RTSn */ + AM64X_IOPAD(0x0240, PIN_INPUT, 0) /* (E15) UART1_RXD */ + AM64X_IOPAD(0x0244, PIN_OUTPUT, 0) /* (E14) UART1_TXD */ + >; + }; + + main_usb0_pins_default: main-usb0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */ >; }; - main_i2c1_pins_default: main-i2c1-pins-default { + main_i2c0_pins_default: main-i2c0-default-pins { + pinctrl-single,pins = < + AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0) /* (A18) I2C0_SCL */ + AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */ + >; + }; + + main_i2c1_pins_default: main-i2c1-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */ AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */ >; }; - mdio1_pins_default: mdio1-pins-default { + mdio1_pins_default: mdio1-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */ AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */ >; }; - rgmii1_pins_default: rgmii1-pins-default { + rgmii1_pins_default: rgmii1-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x011c, PIN_INPUT, 4) /* (AA13) PRG1_PRU1_GPO5.RGMII1_RD0 */ AM64X_IOPAD(0x0128, PIN_INPUT, 4) /* (U12) PRG1_PRU1_GPO8.RGMII1_RD1 */ @@ -281,7 +308,7 @@ >; }; - rgmii2_pins_default: rgmii2-pins-default { + rgmii2_pins_default: rgmii2-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0108, PIN_INPUT, 4) /* (W11) PRG1_PRU1_GPO0.RGMII2_RD0 */ AM64X_IOPAD(0x010c, PIN_INPUT, 4) /* (V11) PRG1_PRU1_GPO1.RGMII2_RD1 */ @@ -298,7 +325,7 @@ >; }; - ospi0_pins_default: ospi0-pins-default { + ospi0_pins_default: ospi0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0000, PIN_OUTPUT, 0) /* (N20) OSPI0_CLK */ AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (L19) OSPI0_CSn0 */ @@ -314,24 +341,24 @@ >; }; - main_ecap0_pins_default: main-ecap0-pins-default { + main_ecap0_pins_default: main-ecap0-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0270, PIN_INPUT, 0) /* (D18) ECAP0_IN_APWM_OUT */ >; }; - main_wlan_en_pins_default: main-wlan-en-pins-default { + main_wlan_en_pins_default: main-wlan-en-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x00c4, PIN_OUTPUT_PULLUP, 7) /* (V8) GPIO0_48 */ >; }; - main_com8_ls_en_pins_default: main-com8-ls-en-pins-default { + main_com8_ls_en_pins_default: main-com8-ls-en-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x00fc, PIN_OUTPUT, 7) /* (U7) PRG1_PRU0_GPO17.GPIO0_62 */ >; }; - main_wlan_pins_default: main-wlan-pins-default { + main_wlan_pins_default: main-wlan-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x00bc, PIN_INPUT, 7) /* (U8) GPIO0_46 */ >; @@ -342,11 +369,26 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_uart0_pins_default>; + current-speed = <115200>; }; &main_uart1 { /* main_uart1 is reserved for firmware usage */ status = "reserved"; + pinctrl-names = "default"; + pinctrl-0 = <&main_uart1_pins_default>; +}; + +&main_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_pins_default>; + clock-frequency = <400000>; + + eeprom@51 { + compatible = "atmel,24c512"; + reg = <0x51>; + }; }; &main_i2c1 { @@ -439,8 +481,7 @@ &cpsw3g { pinctrl-names = "default"; - pinctrl-0 = <&rgmii1_pins_default - &rgmii2_pins_default>; + pinctrl-0 = <&rgmii1_pins_default>, <&rgmii2_pins_default>; }; &cpsw_port1 { @@ -490,10 +531,53 @@ cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ospi.tiboot3"; + reg = <0x0 0x100000>; + }; + + partition@100000 { + label = "ospi.tispl"; + reg = <0x100000 0x200000>; + }; + + partition@300000 { + label = "ospi.u-boot"; + reg = <0x300000 0x400000>; + }; + + partition@700000 { + label = "ospi.env"; + reg = <0x700000 0x40000>; + }; + + partition@740000 { + label = "ospi.env.backup"; + reg = <0x740000 0x40000>; + }; + + partition@800000 { + label = "ospi.rootfs"; + reg = <0x800000 0x37c0000>; + }; + + partition@3fc0000 { + label = "ospi.phypattern"; + reg = <0x3fc0000 0x40000>; + }; + }; }; }; &mailbox0_cluster2 { + status = "okay"; + mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { ti,mbox-rx = <0 0 2>; ti,mbox-tx = <1 0 2>; @@ -505,11 +589,9 @@ }; }; -&mailbox0_cluster3 { - status = "disabled"; -}; - &mailbox0_cluster4 { + status = "okay"; + mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { ti,mbox-rx = <0 0 2>; ti,mbox-tx = <1 0 2>; @@ -521,41 +603,35 @@ }; }; -&mailbox0_cluster5 { - status = "disabled"; -}; - &mailbox0_cluster6 { + status = "okay"; + mbox_m4_0: mbox-m4-0 { ti,mbox-rx = <0 0 2>; ti,mbox-tx = <1 0 2>; }; }; -&mailbox0_cluster7 { - status = "disabled"; -}; - &main_r5fss0_core0 { - mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>; + mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss0_core0>; memory-region = <&main_r5fss0_core0_dma_memory_region>, <&main_r5fss0_core0_memory_region>; }; &main_r5fss0_core1 { - mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>; + mboxes = <&mailbox0_cluster2>, <&mbox_main_r5fss0_core1>; memory-region = <&main_r5fss0_core1_dma_memory_region>, <&main_r5fss0_core1_memory_region>; }; &main_r5fss1_core0 { - mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>; + mboxes = <&mailbox0_cluster4>, <&mbox_main_r5fss1_core0>; memory-region = <&main_r5fss1_core0_dma_memory_region>, <&main_r5fss1_core0_memory_region>; }; &main_r5fss1_core1 { - mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>; + mboxes = <&mailbox0_cluster4>, <&mbox_main_r5fss1_core1>; memory-region = <&main_r5fss1_core1_dma_memory_region>, <&main_r5fss1_core1_memory_region>; }; diff --git a/arch/arm/dts/k3-am642.dtsi b/arch/arm/dts/k3-am642.dtsi index 8a76f4821b..7a6eedea3a 100644 --- a/arch/arm/dts/k3-am642.dtsi +++ b/arch/arm/dts/k3-am642.dtsi @@ -58,6 +58,7 @@ L2_0: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; cache-size = <0x40000>; cache-line-size = <64>; cache-sets = <256>; diff --git a/arch/arm/dts/k3-pinctrl.h b/arch/arm/dts/k3-pinctrl.h new file mode 100644 index 0000000000..c97548a3f4 --- /dev/null +++ b/arch/arm/dts/k3-pinctrl.h @@ -0,0 +1,53 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * This header provides constants for pinctrl bindings for TI's K3 SoC + * family. + * + * Copyright (C) 2018-2023 Texas Instruments Incorporated - https://www.ti.com/ + */ +#ifndef DTS_ARM64_TI_K3_PINCTRL_H +#define DTS_ARM64_TI_K3_PINCTRL_H + +#define PULLUDEN_SHIFT (16) +#define PULLTYPESEL_SHIFT (17) +#define RXACTIVE_SHIFT (18) + +#define PULL_DISABLE (1 << PULLUDEN_SHIFT) +#define PULL_ENABLE (0 << PULLUDEN_SHIFT) + +#define PULL_UP (1 << PULLTYPESEL_SHIFT | PULL_ENABLE) +#define PULL_DOWN (0 << PULLTYPESEL_SHIFT | PULL_ENABLE) + +#define INPUT_EN (1 << RXACTIVE_SHIFT) +#define INPUT_DISABLE (0 << RXACTIVE_SHIFT) + +/* Only these macros are expected be used directly in device tree files */ +#define PIN_OUTPUT (INPUT_DISABLE | PULL_DISABLE) +#define PIN_OUTPUT_PULLUP (INPUT_DISABLE | PULL_UP) +#define PIN_OUTPUT_PULLDOWN (INPUT_DISABLE | PULL_DOWN) +#define PIN_INPUT (INPUT_EN | PULL_DISABLE) +#define PIN_INPUT_PULLUP (INPUT_EN | PULL_UP) +#define PIN_INPUT_PULLDOWN (INPUT_EN | PULL_DOWN) + +#define AM62AX_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) +#define AM62AX_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) + +#define AM62X_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) +#define AM62X_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) + +#define AM64X_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) +#define AM64X_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) + +#define AM65X_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) +#define AM65X_WKUP_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) + +#define J721E_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) +#define J721E_WKUP_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) + +#define J721S2_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) +#define J721S2_WKUP_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) + +#define J784S4_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) +#define J784S4_WKUP_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) + +#endif -- 2.34.1