[PATCH 1/2] doc: board: phytec: add phycore_imx8mm

[PATCH 1/2] doc: board: phytec: add phycore_imx8mm

[Yannic Moog]

Add documentation on how to build a bootable U-Boot image for the PHYTEC
phyCORE-i.MX 8M Mini.

Signed-off-by: Yannic Moog <y.moog@phytec.de>
---
 doc/board/index.rst                 |  1 +
 doc/board/phytec/index.rst          |  9 +++++
 doc/board/phytec/phycore-imx8mm.rst | 60 +++++++++++++++++++++++++++++
 3 files changed, 70 insertions(+)
 create mode 100644 doc/board/phytec/index.rst
 create mode 100644 doc/board/phytec/phycore-imx8mm.rst

diff --git a/doc/board/index.rst b/doc/board/index.rst
index 9ef25b1091..ce1fbe2fff 100644
--- a/doc/board/index.rst
+++ b/doc/board/index.rst
@@ -32,6 +32,7 @@ Board-specific doc
    nokia/index
    nxp/index
    openpiton/index
+   phytec/index
    purism/index
    qualcomm/index
    renesas/index
diff --git a/doc/board/phytec/index.rst b/doc/board/phytec/index.rst
new file mode 100644
index 0000000000..30292d0d76
--- /dev/null
+++ b/doc/board/phytec/index.rst
@@ -0,0 +1,9 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+PHYTEC
+======
+
+.. toctree::
+   :maxdepth: 2
+
+   phycore-imx8mm
diff --git a/doc/board/phytec/phycore-imx8mm.rst b/doc/board/phytec/phycore-imx8mm.rst
new file mode 100644
index 0000000000..e9dc225990
--- /dev/null
+++ b/doc/board/phytec/phycore-imx8mm.rst
@@ -0,0 +1,60 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+phyCORE-i.MX 8M Mini
+====================
+
+The phyCORE-i.MX 8M Mini with 2GB of main memory is supported.
+
+Quick Start
+-----------
+
+- Build the ARM Trusted firmware binary
+- Get ddr firmware
+- Build U-Boot
+- Boot
+
+Build the ARM Trusted firmware binary
+-------------------------------------
+
+.. code-block:: bash
+
+   $ git clone https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git
+   $ cd trusted-firmware-a
+   $ export CROSS_COMPILE=aarch64-linux-gnu
+   $ export IMX_BOOT_UART_BASE=0x30880000
+   $ make PLAT=imx8mm bl31
+
+Get the ddr firmware
+--------------------
+
+.. code-block:: bash
+
+   $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.19.bin
+   $ chmod +x firmware-imx-8.19.bin
+   $ ./firmware-imx-8.19.bin
+
+Build U-Boot for SD card
+------------------------
+
+Copy binaries
+^^^^^^^^^^^^^
+
+.. code-block:: bash
+
+   $ cp <TF-A dir>/build/imx8mm/release/bl31.bin .
+   $ cp firmware-imx-8.19/firmware/ddr/synopsys/lpddr4*.bin .
+
+Build U-Boot
+^^^^^^^^^^^^
+
+.. code-block:: bash
+
+   $ make phycore-imx8mm_defconfig
+   $ make flash.bin
+
+Flash SD card
+^^^^^^^^^^^^^
+
+.. code-block:: bash
+
+   $ sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33 conv=sync
-- 
2.34.1

[PATCH 1/2] doc: board: phytec: add phycore_imx8mm

[sbabic]

> Add documentation on how to build a bootable U-Boot image for the PHYTEC
> phyCORE-i.MX 8M Mini.
> Signed-off-by: Yannic Moog <y.moog@phytec.de>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,        Managing Director: Erika Unter  
HRB 165235 Munich,   Office: Kirchenstr.5, 82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================