From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Cc: Marek Vasut <marex@denx.de>, Kevin Hilman <khilman@baylibre.com>,
Lukasz Majewski <lukma@denx.de>, Simon Glass <sjg@chromium.org>
Subject: [PATCH v2 4/4] usb: gadget: ether: Handle gadget driver registration in probe and remove
Date: Mon, 17 Jul 2023 13:21:37 +0200 [thread overview]
Message-ID: <20230717112137.9139-4-marex@denx.de> (raw)
In-Reply-To: <20230717112137.9139-1-marex@denx.de>
Move the ethernet gadget driver registration and removal from ethernet
bind and unbind callbacks into driver DM probe and remove callbacks.
This way, when the driver is bound, which is triggered deliberately
using 'bind' command, the USB ethernet gadget driver is instantiated
and bound to the matching UDC. In reverse, when the driver is unbound,
which is again triggered deliberately using 'unbind' command, the USB
ethernet gadget driver instance is removed.
Effectively, this now behaves like running either 'ums' or 'dfu' or
any other commands utilizing USB gadget functionality.
This also drops use of usb_gadget_initialize()/usb_gadget_release(),
which are helper functions implemented in the UDC uclass to bind and
unbind UDC drivers to controllers from U-Boot command line. Those have
no place in drivers.
Signed-off-by: Marek Vasut <marex@denx.de>
---
NOTE: This must be thoroughly tested.
---
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Lukasz Majewski <lukma@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Simon Glass <sjg@chromium.org>
---
V2: Fix up return value handling in probe
---
drivers/usb/gadget/ether.c | 87 +++++++++++++++++++-------------------
1 file changed, 43 insertions(+), 44 deletions(-)
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 2040b5b5081..9e1a45ad9df 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -2281,49 +2281,8 @@ static int usb_eth_start(struct udevice *udev)
struct eth_dev *dev = &priv->ethdev;
struct usb_gadget *gadget;
unsigned long ts;
- int ret;
unsigned long timeout = USB_CONNECT_TIMEOUT;
- ret = usb_gadget_initialize(0);
- if (ret)
- return ret;
-
- /* Configure default mac-addresses for the USB ethernet device */
-#ifdef CONFIG_USBNET_DEV_ADDR
- strlcpy(dev_addr, CONFIG_USBNET_DEV_ADDR, sizeof(dev_addr));
-#endif
-#ifdef CONFIG_USBNET_HOST_ADDR
- strlcpy(host_addr, CONFIG_USBNET_HOST_ADDR, sizeof(host_addr));
-#endif
- /* Check if the user overruled the MAC addresses */
- if (env_get("usbnet_devaddr"))
- strlcpy(dev_addr, env_get("usbnet_devaddr"),
- sizeof(dev_addr));
-
- if (env_get("usbnet_hostaddr"))
- strlcpy(host_addr, env_get("usbnet_hostaddr"),
- sizeof(host_addr));
-
- if (!is_eth_addr_valid(dev_addr)) {
- pr_err("Need valid 'usbnet_devaddr' to be set");
- goto fail;
- }
- if (!is_eth_addr_valid(host_addr)) {
- pr_err("Need valid 'usbnet_hostaddr' to be set");
- goto fail;
- }
-
- priv->eth_driver.speed = DEVSPEED;
- priv->eth_driver.bind = eth_bind;
- priv->eth_driver.unbind = eth_unbind;
- priv->eth_driver.setup = eth_setup;
- priv->eth_driver.reset = eth_disconnect;
- priv->eth_driver.disconnect = eth_disconnect;
- priv->eth_driver.suspend = eth_suspend;
- priv->eth_driver.resume = eth_resume;
- if (usb_gadget_register_driver(&priv->eth_driver) < 0)
- goto fail;
-
dev->network_started = 0;
packet_received = 0;
@@ -2450,9 +2409,6 @@ static void usb_eth_stop(struct udevice *udev)
usb_gadget_handle_interrupts(0);
dev->network_started = 0;
}
-
- usb_gadget_unregister_driver(&priv->eth_driver);
- usb_gadget_release(0);
}
static int usb_eth_recv(struct udevice *dev, int flags, uchar **packetp)
@@ -2525,6 +2481,48 @@ static int usb_eth_probe(struct udevice *dev)
get_ether_addr(CONFIG_USBNET_DEV_ADDR, pdata->enetaddr);
eth_env_set_enetaddr("usbnet_devaddr", pdata->enetaddr);
+ /* Configure default mac-addresses for the USB ethernet device */
+#ifdef CONFIG_USBNET_DEV_ADDR
+ strlcpy(dev_addr, CONFIG_USBNET_DEV_ADDR, sizeof(dev_addr));
+#endif
+#ifdef CONFIG_USBNET_HOST_ADDR
+ strlcpy(host_addr, CONFIG_USBNET_HOST_ADDR, sizeof(host_addr));
+#endif
+ /* Check if the user overruled the MAC addresses */
+ if (env_get("usbnet_devaddr"))
+ strlcpy(dev_addr, env_get("usbnet_devaddr"),
+ sizeof(dev_addr));
+
+ if (env_get("usbnet_hostaddr"))
+ strlcpy(host_addr, env_get("usbnet_hostaddr"),
+ sizeof(host_addr));
+
+ if (!is_eth_addr_valid(dev_addr)) {
+ pr_err("Need valid 'usbnet_devaddr' to be set");
+ return -EINVAL;
+ }
+ if (!is_eth_addr_valid(host_addr)) {
+ pr_err("Need valid 'usbnet_hostaddr' to be set");
+ return -EINVAL;
+ }
+
+ priv->eth_driver.speed = DEVSPEED;
+ priv->eth_driver.bind = eth_bind;
+ priv->eth_driver.unbind = eth_unbind;
+ priv->eth_driver.setup = eth_setup;
+ priv->eth_driver.reset = eth_disconnect;
+ priv->eth_driver.disconnect = eth_disconnect;
+ priv->eth_driver.suspend = eth_suspend;
+ priv->eth_driver.resume = eth_resume;
+ return usb_gadget_register_driver(&priv->eth_driver);
+}
+
+static int usb_eth_remove(struct udevice *dev)
+{
+ struct ether_priv *priv = dev_get_priv(dev);
+
+ usb_gadget_unregister_driver(&priv->eth_driver);
+
return 0;
}
@@ -2532,6 +2530,7 @@ U_BOOT_DRIVER(eth_usb) = {
.name = "usb_ether",
.id = UCLASS_ETH,
.probe = usb_eth_probe,
+ .remove = usb_eth_remove,
.ops = &usb_eth_ops,
.priv_auto = sizeof(struct ether_priv),
.plat_auto = sizeof(struct eth_pdata),
--
2.40.1
next prev parent reply other threads:[~2023-07-17 11:22 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-17 11:21 [PATCH v2 1/4] cmd: bind: Add unbind command with driver filter Marek Vasut
2023-07-17 11:21 ` [PATCH v2 2/4] usb: gadget: ether: Inline functions used once Marek Vasut
2023-07-19 19:54 ` Tom Rini
2023-07-17 11:21 ` [PATCH v2 3/4] usb: gadget: ether: Move probe function above driver structure Marek Vasut
2023-07-19 19:54 ` Tom Rini
2023-07-17 11:21 ` Marek Vasut [this message]
2023-07-19 1:08 ` [PATCH v2 1/4] cmd: bind: Add unbind command with driver filter Simon Glass
2023-07-19 14:23 ` Marek Vasut
2023-07-19 19:11 ` Simon Glass
2023-07-19 19:53 ` Tom Rini
2023-07-23 17:49 ` Miquel Raynal
2023-07-23 21:45 ` Marek Vasut
2023-07-28 13:23 ` Miquel Raynal
2023-07-29 15:02 ` Marek Vasut
2023-07-24 18:13 ` Tom Rini
2023-07-28 12:55 ` Miquel Raynal
2023-07-28 14:00 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230717112137.9139-4-marex@denx.de \
--to=marex@denx.de \
--cc=khilman@baylibre.com \
--cc=lukma@denx.de \
--cc=sjg@chromium.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox