From: Sam Edwards <cfsworks@gmail.com>
To: u-boot@lists.denx.de, Andre Przywara <andre.przywara@arm.com>,
Jagan Teki <jagan@amarulasolutions.com>
Cc: Samuel Holland <samuel@sholland.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Icenowy Zheng <uwu@icenowy.me>,
Maksim Kiselev <bigunclemax@gmail.com>,
Sam Edwards <CFSworks@gmail.com>
Subject: [PATCH v2 2/5] sunxi: psci: refactor register access to separate functions
Date: Wed, 16 Aug 2023 10:34:17 -0700 [thread overview]
Message-ID: <20230816173420.83232-3-CFSworks@gmail.com> (raw)
In-Reply-To: <20230816173420.83232-1-CFSworks@gmail.com>
This is to prepare for R528, which does not have the typical
"CPUCFG" block; it has a "CPUX" block which provides these
same functions but is organized differently.
Moving the hardware-access bits to their own functions separates the
logic from the hardware so we can reuse the same logic.
Signed-off-by: Sam Edwards <CFSworks@gmail.com>
---
arch/arm/cpu/armv7/sunxi/psci.c | 66 +++++++++++++++++++++++----------
1 file changed, 47 insertions(+), 19 deletions(-)
diff --git a/arch/arm/cpu/armv7/sunxi/psci.c b/arch/arm/cpu/armv7/sunxi/psci.c
index 7804e0933b..e2845f21ab 100644
--- a/arch/arm/cpu/armv7/sunxi/psci.c
+++ b/arch/arm/cpu/armv7/sunxi/psci.c
@@ -92,7 +92,7 @@ static void __secure clamp_set(u32 *clamp)
writel(0xff, clamp);
}
-static void __secure sunxi_set_entry_address(void *entry)
+static void __secure sunxi_cpu_set_entry(int __always_unused cpu, void *entry)
{
/* secondary core entry address is programmed differently on R40 */
if (IS_ENABLED(CONFIG_MACH_SUN8I_R40)) {
@@ -148,30 +148,60 @@ static void __secure sunxi_cpu_set_power(int cpu, bool on)
}
}
-void __secure sunxi_cpu_power_off(u32 cpuid)
+static void __secure sunxi_cpu_set_reset(int cpu, bool reset)
+{
+ struct sunxi_cpucfg_reg *cpucfg =
+ (struct sunxi_cpucfg_reg *)SUNXI_CPUCFG_BASE;
+
+ writel(reset ? 0b00 : 0b11, &cpucfg->cpu[cpu].rst);
+}
+
+static void __secure sunxi_cpu_set_locking(int cpu, bool lock)
{
struct sunxi_cpucfg_reg *cpucfg =
(struct sunxi_cpucfg_reg *)SUNXI_CPUCFG_BASE;
+
+ if (lock)
+ clrbits_le32(&cpucfg->dbg_ctrl1, BIT(cpu));
+ else
+ setbits_le32(&cpucfg->dbg_ctrl1, BIT(cpu));
+}
+
+static bool __secure sunxi_cpu_poll_wfi(int cpu)
+{
+ struct sunxi_cpucfg_reg *cpucfg =
+ (struct sunxi_cpucfg_reg *)SUNXI_CPUCFG_BASE;
+
+ return !!(readl(&cpucfg->cpu[cpu].status) & BIT(2));
+}
+
+static void __secure sunxi_cpu_invalidate_cache(int cpu)
+{
+ struct sunxi_cpucfg_reg *cpucfg =
+ (struct sunxi_cpucfg_reg *)SUNXI_CPUCFG_BASE;
+
+ clrbits_le32(&cpucfg->gen_ctrl, BIT(cpu));
+}
+
+void __secure sunxi_cpu_power_off(u32 cpuid)
+{
u32 cpu = cpuid & 0x3;
/* Wait for the core to enter WFI */
- while (1) {
- if (readl(&cpucfg->cpu[cpu].status) & BIT(2))
- break;
+ while (!sunxi_cpu_poll_wfi(cpu))
__mdelay(1);
- }
/* Assert reset on target CPU */
- writel(0, &cpucfg->cpu[cpu].rst);
+ sunxi_cpu_set_reset(cpu, true);
/* Lock CPU (Disable external debug access) */
- clrbits_le32(&cpucfg->dbg_ctrl1, BIT(cpu));
+ sunxi_cpu_set_locking(cpu, true);
/* Power down CPU */
sunxi_cpu_set_power(cpuid, false);
- /* Unlock CPU (Disable external debug access) */
- setbits_le32(&cpucfg->dbg_ctrl1, BIT(cpu));
+ /* Unlock CPU (Reenable external debug access) */
+ sunxi_cpu_set_locking(cpu, false);
}
static u32 __secure cp15_read_scr(void)
@@ -228,33 +258,31 @@ out:
int __secure psci_cpu_on(u32 __always_unused unused, u32 mpidr, u32 pc,
u32 context_id)
{
- struct sunxi_cpucfg_reg *cpucfg =
- (struct sunxi_cpucfg_reg *)SUNXI_CPUCFG_BASE;
u32 cpu = (mpidr & 0x3);
/* store target PC and context id */
psci_save(cpu, pc, context_id);
/* Set secondary core power on PC */
- sunxi_set_entry_address(&psci_cpu_entry);
+ sunxi_cpu_set_entry(cpu, &psci_cpu_entry);
/* Assert reset on target CPU */
- writel(0, &cpucfg->cpu[cpu].rst);
+ sunxi_cpu_set_reset(cpu, true);
/* Invalidate L1 cache */
- clrbits_le32(&cpucfg->gen_ctrl, BIT(cpu));
+ sunxi_cpu_invalidate_cache(cpu);
/* Lock CPU (Disable external debug access) */
- clrbits_le32(&cpucfg->dbg_ctrl1, BIT(cpu));
+ sunxi_cpu_set_locking(cpu, true);
/* Power up target CPU */
sunxi_cpu_set_power(cpu, true);
/* De-assert reset on target CPU */
- writel(BIT(1) | BIT(0), &cpucfg->cpu[cpu].rst);
+ sunxi_cpu_set_reset(cpu, false);
- /* Unlock CPU (Disable external debug access) */
- setbits_le32(&cpucfg->dbg_ctrl1, BIT(cpu));
+ /* Unlock CPU (Reenable external debug access) */
+ sunxi_cpu_set_locking(cpu, false);
return ARM_PSCI_RET_SUCCESS;
}
--
2.41.0
next prev parent reply other threads:[~2023-08-16 17:34 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-16 17:34 [PATCH v2 0/5] Allwinner R528/T113s PSCI Sam Edwards
2023-08-16 17:34 ` [PATCH v2 1/5] sunxi: psci: clean away preprocessor macros Sam Edwards
2023-08-18 14:11 ` Andre Przywara
2023-08-18 17:40 ` Sam Edwards
2023-08-18 21:17 ` Sam Edwards
2023-09-27 16:34 ` Andre Przywara
2023-09-27 23:32 ` Sam Edwards
2023-08-16 17:34 ` Sam Edwards [this message]
2023-08-18 14:57 ` [PATCH v2 2/5] sunxi: psci: refactor register access to separate functions Andre Przywara
2023-08-18 17:32 ` Sam Edwards
2023-08-16 17:34 ` [PATCH v2 3/5] sunxi: psci: stop modeling register layout with C structs Sam Edwards
2023-08-16 17:34 ` [PATCH v2 4/5] sunxi: psci: implement PSCI on R528 Sam Edwards
2023-09-27 16:31 ` Andre Przywara
2023-09-28 0:01 ` Sam Edwards
2023-09-28 0:35 ` Andre Przywara
2023-08-16 17:34 ` [PATCH v2 5/5] HACK: sunxi: psci: be compatible with v1 of R528 patchset Sam Edwards
2023-09-27 16:32 ` Andre Przywara
2023-09-27 23:28 ` Sam Edwards
2023-09-28 0:35 ` Andre Przywara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230816173420.83232-3-CFSworks@gmail.com \
--to=cfsworks@gmail.com \
--cc=andre.przywara@arm.com \
--cc=bigunclemax@gmail.com \
--cc=jagan@amarulasolutions.com \
--cc=jernej.skrabec@gmail.com \
--cc=samuel@sholland.org \
--cc=u-boot@lists.denx.de \
--cc=uwu@icenowy.me \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox