[PATCH 0/2] thermal: Add VTM driver support for J72xx SOCs

[PATCH 0/2] thermal: Add VTM driver support for J72xx SOCs

[Udit Kumar]

This series adds VTM (Voltage and Thermal Manager) driver support
for J72xx SOCs.

Basically this driver is ported from kernel v6.5 to u-boot.
Main purpose of this driver to program thermal shutdown value
and provide SOC temperature.

To use this driver, update in device tree and defconfig are  needed.

Device tree sync is under review with series
https://lore.kernel.org/all/20230822185725.6718-1-reidt@ti.com/
Once above DT sync series will be merged, another patch will be posted
to update defconfig.
For now marking DT and defconfig update as donotmerge.

Boot logs:
https://gist.github.com/uditkumarti/fca15b10abe4c756b7889a8dc45bad57
line 67, u-boot temperature and line 778 temperature reported by OS

Udit Kumar (2):
  thermal: k3-j72xx-bandgap: Add support for vtm
  DONOTMERGE: j7200: device tree and defconfig

 arch/arm/dts/k3-j7200-mcu-wakeup.dtsi |   9 +
 configs/j7200_evm_a72_defconfig       |   3 +
 drivers/thermal/Kconfig               |   6 +
 drivers/thermal/Makefile              |   1 +
 drivers/thermal/k3_j72xx_bandgap.c    | 539 ++++++++++++++++++++++++++
 5 files changed, 558 insertions(+)
 create mode 100644 drivers/thermal/k3_j72xx_bandgap.c

-- 
2.34.1

[PATCH 1/2] thermal: k3-j72xx-bandgap: Add support for vtm

[Udit Kumar]

Add support for VTM (Voltage and Thermal Manager), which
is part of TI's K3 series SOC.

Signed-off-by: Udit Kumar <u-kumar1@ti.com>
---
 drivers/thermal/Kconfig            |   6 +
 drivers/thermal/Makefile           |   1 +
 drivers/thermal/k3_j72xx_bandgap.c | 539 +++++++++++++++++++++++++++++
 3 files changed, 546 insertions(+)
 create mode 100644 drivers/thermal/k3_j72xx_bandgap.c

diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 681b621760..5ecd916365 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -35,6 +35,12 @@ config IMX_TMU
 	  The boot is hold to the cool device to throttle CPUs when the
 	  passive trip is crossed
 
+config TI_K3_THERMAL
+        bool "Temperature sensor driver for TI K3 j7xx SOCs"
+        help
+	 Enable thermal support for the Texas Instruments TI K3 j7xx family.
+	 The driver supports reading CPU temperature.
+
 config TI_DRA7_THERMAL
         bool "Temperature sensor driver for TI dra7xx SOCs"
         help
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 8acc7d20cb..e2a6d9f877 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -8,4 +8,5 @@ obj-$(CONFIG_SANDBOX) += thermal_sandbox.o
 obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o
 obj-$(CONFIG_IMX_SCU_THERMAL) += imx_scu_thermal.o
 obj-$(CONFIG_TI_DRA7_THERMAL) += ti-bandgap.o
+obj-$(CONFIG_TI_K3_THERMAL) += k3_j72xx_bandgap.o
 obj-$(CONFIG_IMX_TMU) += imx_tmu.o
diff --git a/drivers/thermal/k3_j72xx_bandgap.c b/drivers/thermal/k3_j72xx_bandgap.c
new file mode 100644
index 0000000000..5524bb5c9a
--- /dev/null
+++ b/drivers/thermal/k3_j72xx_bandgap.c
@@ -0,0 +1,539 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * TI Bandgap temperature sensor driver for J72XX SoC Family
+ *
+ * Copyright (C) 2023 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ *
+ * Taken from Linux v6.5 (drivers/thermal/k3_j72xx_bandgap.c)
+ * and ported to uboot
+ */
+
+#include <linux/math64.h>
+#include <dm.h>
+#include <dm/devres.h>
+#include <thermal.h>
+
+#include <linux/err.h>
+#include <linux/types.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+
+#define K3_VTM_DEVINFO_PWR0_OFFSET		0x4
+#define K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK	0xf0
+#define K3_VTM_TMPSENS0_CTRL_OFFSET		0x300
+#define K3_VTM_MISC_CTRL_OFFSET			0xc
+#define K3_VTM_TMPSENS_STAT_OFFSET		0x8
+#define K3_VTM_ANYMAXT_OUTRG_ALERT_EN		0x1
+#define K3_VTM_MISC_CTRL2_OFFSET		0x10
+#define K3_VTM_TS_STAT_DTEMP_MASK		0x3ff
+#define K3_VTM_MAX_NUM_TS			8
+#define K3_VTM_TMPSENS_CTRL_SOC			BIT(5)
+#define K3_VTM_TMPSENS_CTRL_CLRZ		BIT(6)
+#define K3_VTM_TMPSENS_CTRL_CLKON_REQ		BIT(7)
+#define K3_VTM_TMPSENS_CTRL_MAXT_OUTRG_EN	BIT(11)
+
+#define K3_VTM_CORRECTION_TEMP_CNT		3
+
+#define MINUS40CREF				5
+#define PLUS30CREF				253
+#define PLUS125CREF				730
+#define PLUS150CREF				940
+
+#define TABLE_SIZE				1024
+#define MAX_TEMP				123000
+#define COOL_DOWN_TEMP				105000
+
+#define FACTORS_REDUCTION			13
+static int *derived_table;
+
+static u64 int_pow(u64 base, unsigned int exp)
+{
+	u64 result = 1;
+
+	while (exp) {
+		if (exp & 1)
+			result *= base;
+		exp >>= 1;
+		base *= base;
+	}
+
+	return result;
+}
+
+static int compute_value(int index, const s64 *factors, int nr_factors,
+			 int reduction)
+{
+	s64 value = 0;
+	int i;
+
+	for (i = 0; i < nr_factors; i++)
+		value += factors[i] * int_pow(index, i);
+
+	return (int)div64_s64(value, int_pow(10, reduction));
+}
+
+static void init_table(int factors_size, int *table, const s64 *factors)
+{
+	int i;
+
+	for (i = 0; i < TABLE_SIZE; i++)
+		table[i] = compute_value(i, factors, factors_size,
+					 FACTORS_REDUCTION);
+}
+
+/**
+ * struct err_values - structure containing error/reference values
+ * @refs: reference error values for -40C, 30C, 125C & 150C
+ * @errs: Actual error values for -40C, 30C, 125C & 150C read from the efuse
+ */
+struct err_values {
+	int refs[4];
+	int errs[4];
+};
+
+static void create_table_segments(struct err_values *err_vals, int seg,
+				  int *ref_table)
+{
+	int m = 0, c, num, den, i, err, idx1, idx2, err1, err2, ref1, ref2;
+
+	if (seg == 0)
+		idx1 = 0;
+	else
+		idx1 = err_vals->refs[seg];
+
+	idx2 = err_vals->refs[seg + 1];
+	err1 = err_vals->errs[seg];
+	err2 = err_vals->errs[seg + 1];
+	ref1 = err_vals->refs[seg];
+	ref2 = err_vals->refs[seg + 1];
+
+	/*
+	 * Calculate the slope with adc values read from the register
+	 * as the y-axis param and err in adc value as x-axis param
+	 */
+	num = ref2 - ref1;
+	den = err2 - err1;
+	if (den)
+		m = num / den;
+	c = ref2 - m * err2;
+
+	/*
+	 * Take care of divide by zero error if error values are same
+	 * Or when the slope is 0
+	 */
+	if (den != 0 && m != 0) {
+		for (i = idx1; i <= idx2; i++) {
+			err = (i - c) / m;
+			if (((i + err) < 0) || ((i + err) >= TABLE_SIZE))
+				continue;
+			derived_table[i] = ref_table[i + err];
+		}
+	} else { /* Constant error take care of divide by zero */
+		for (i = idx1; i <= idx2; i++) {
+			if (((i + err1) < 0) || ((i + err1) >= TABLE_SIZE))
+				continue;
+			derived_table[i] = ref_table[i + err1];
+		}
+	}
+}
+
+static int prep_lookup_table(struct err_values *err_vals, int *ref_table)
+{
+	int inc, i, seg;
+
+	/*
+	 * Fill up the lookup table under 3 segments
+	 * region -40C to +30C
+	 * region +30C to +125C
+	 * region +125C to +150C
+	 */
+	for (seg = 0; seg < 3; seg++)
+		create_table_segments(err_vals, seg, ref_table);
+
+	/* Get to the first valid temperature */
+	i = 0;
+	while (!derived_table[i])
+		i++;
+
+	/*
+	 * Get to the last zero index and back fill the temperature for
+	 * sake of continuity
+	 */
+	if (i) {
+		/* 300 milli celsius steps */
+		while (i--)
+			derived_table[i] = derived_table[i + 1] - 300;
+	}
+
+	/*
+	 * Fill the last trailing 0s which are unfilled with increments of
+	 * 100 milli celsius till 1023 code
+	 */
+	i = TABLE_SIZE - 1;
+	while (!derived_table[i])
+		i--;
+
+	i++;
+	inc = 1;
+	while (i < TABLE_SIZE) {
+		derived_table[i] = derived_table[i - 1] + inc * 100;
+		i++;
+	}
+
+	return 0;
+}
+
+struct k3_thermal_data;
+
+struct k3_j72xx_bandgap {
+	struct udevice *dev;
+	void __iomem *base;
+	void __iomem *cfg2_base;
+	struct k3_thermal_data *ts_data[K3_VTM_MAX_NUM_TS];
+};
+
+/* common data structures */
+struct k3_thermal_data {
+	struct k3_j72xx_bandgap *bgp;
+	u32 ctrl_offset;
+	u32 stat_offset;
+};
+
+static int two_cmp(int tmp, int mask)
+{
+	tmp = ~(tmp);
+	tmp &= mask;
+	tmp += 1;
+
+	/* Return negative value */
+	return (0 - tmp);
+}
+
+static unsigned int vtm_get_best_value(unsigned int s0, unsigned int s1,
+				       unsigned int s2)
+{
+	int d01 = abs(s0 - s1);
+	int d02 = abs(s0 - s2);
+	int d12 = abs(s1 - s2);
+
+	if (d01 <= d02 && d01 <= d12)
+		return (s0 + s1) / 2;
+
+	if (d02 <= d01 && d02 <= d12)
+		return (s0 + s2) / 2;
+
+	return (s1 + s2) / 2;
+}
+
+static inline int k3_bgp_read_temp(struct k3_j72xx_bandgap *bgp,
+				   int *temp)
+{
+	unsigned int dtemp, s0, s1, s2;
+
+	/*
+	 * Errata is applicable for am654 pg 1.0 silicon/J7ES. There
+	 * is a variation of the order for certain degree centigrade on AM654.
+	 * Work around that by getting the average of two closest
+	 * readings out of three readings everytime we want to
+	 * report temperatures.
+	 *
+	 * Errata workaround.
+	 */
+	s0 = readl(bgp->base + bgp->ts_data[0]->stat_offset) &
+		K3_VTM_TS_STAT_DTEMP_MASK;
+	s1 = readl(bgp->base + bgp->ts_data[0]->stat_offset) &
+		K3_VTM_TS_STAT_DTEMP_MASK;
+	s2 = readl(bgp->base + bgp->ts_data[0]->stat_offset) &
+		K3_VTM_TS_STAT_DTEMP_MASK;
+	dtemp = vtm_get_best_value(s0, s1, s2);
+
+	if (dtemp < 0 || dtemp >= TABLE_SIZE)
+		return -EINVAL;
+
+	*temp = derived_table[dtemp];
+
+	return 0;
+}
+
+/* Get temperature callback function for thermal zone */
+static int k3_thermal_get_temp(struct udevice *dev,  int *temp)
+{
+	struct k3_j72xx_bandgap *bgp = dev_get_priv(dev);
+
+	return k3_bgp_read_temp(bgp, temp);
+}
+
+static const struct dm_thermal_ops k3_of_thermal_ops = {
+	.get_temp = k3_thermal_get_temp,
+};
+
+static int k3_j72xx_bandgap_temp_to_adc_code(int temp)
+{
+	int low = 0, high = TABLE_SIZE - 1, mid;
+
+	if (temp > 160000 || temp < -50000)
+		return -EINVAL;
+
+	/* Binary search to find the adc code */
+	while (low < (high - 1)) {
+		mid = (low + high) / 2;
+		if (temp <= derived_table[mid])
+			high = mid;
+		else
+			low = mid;
+	}
+
+	return mid;
+}
+
+static void get_efuse_values(int id, struct k3_thermal_data *data, int *err,
+			     void __iomem *fuse_base)
+{
+	int i, tmp, pow;
+	int ct_offsets[5][K3_VTM_CORRECTION_TEMP_CNT] = {
+		{ 0x0, 0x8, 0x4 },
+		{ 0x0, 0x8, 0x4 },
+		{ 0x0, -1,  0x4 },
+		{ 0x0, 0xC, -1 },
+		{ 0x0, 0xc, 0x8 }
+	};
+	int ct_bm[5][K3_VTM_CORRECTION_TEMP_CNT] = {
+		{ 0x3f, 0x1fe000, 0x1ff },
+		{ 0xfc0, 0x1fe000, 0x3fe00 },
+		{ 0x3f000, 0x7f800000, 0x7fc0000 },
+		{ 0xfc0000, 0x1fe0, 0x1f800000 },
+		{ 0x3f000000, 0x1fe000, 0x1ff0 }
+	};
+
+	for (i = 0; i < 3; i++) {
+		/* Extract the offset value using bit-mask */
+		if (ct_offsets[id][i] == -1 && i == 1) {
+			/* 25C offset Case of Sensor 2 split between 2 regs */
+			tmp = (readl(fuse_base + 0x8) & 0xE0000000) >> (29);
+			tmp |= ((readl(fuse_base + 0xC) & 0x1F) << 3);
+			pow = tmp & 0x80;
+		} else if (ct_offsets[id][i] == -1 && i == 2) {
+			/* 125C Case of Sensor 3 split between 2 regs */
+			tmp = (readl(fuse_base + 0x4) & 0xF8000000) >> (27);
+			tmp |= ((readl(fuse_base + 0x8) & 0xF) << 5);
+			pow = tmp & 0x100;
+		} else {
+			tmp = readl(fuse_base + ct_offsets[id][i]);
+			tmp &= ct_bm[id][i];
+			tmp = tmp >> __ffs(ct_bm[id][i]);
+
+			/* Obtain the sign bit pow*/
+			pow = ct_bm[id][i] >> __ffs(ct_bm[id][i]);
+			pow += 1;
+			pow /= 2;
+		}
+
+		/* Check for negative value */
+		if (tmp & pow) {
+			/* 2's complement value */
+			tmp = two_cmp(tmp, ct_bm[id][i] >> __ffs(ct_bm[id][i]));
+		}
+		err[i] = tmp;
+	}
+
+	/* Err value for 150C is set to 0 */
+	err[i] = 0;
+}
+
+static void print_look_up_table(struct udevice *dev, int *ref_table)
+{
+	int i;
+
+	debug("The contents of derived array\n");
+	debug("Code   Temperature\n");
+	for (i = 0; i < TABLE_SIZE; i++)
+		debug("%d       %d %d\n", i, derived_table[i], ref_table[i]);
+}
+
+struct k3_j72xx_bandgap_data {
+	const bool has_errata_i2128;
+};
+
+static int k3_j72xx_bandgap_probe(struct udevice *dev)
+{
+	int ret = 0, cnt, val, id;
+	int high_max, low_temp;
+	struct k3_j72xx_bandgap *bgp;
+	struct k3_thermal_data *data;
+	bool workaround_needed = false;
+	const struct k3_j72xx_bandgap_data *driver_data;
+	int *ref_table;
+	struct err_values err_vals;
+	void __iomem *fuse_base;
+
+	const s64 golden_factors[] = {
+		-490019999999999936,
+		3251200000000000,
+		-1705800000000,
+		603730000,
+		-92627,
+	};
+
+	const s64 pvt_wa_factors[] = {
+		-415230000000000000,
+		3126600000000000,
+		-1157800000000,
+	};
+	bgp = dev_get_priv(dev);
+	if (!bgp)
+		return -ENOMEM;
+
+	bgp->dev = dev;
+	bgp->base = (void __iomem *)devfdt_get_addr_index(dev, 0);
+	if (IS_ERR(bgp->base))
+		return PTR_ERR(bgp->base);
+
+	bgp->cfg2_base = (void __iomem *)devfdt_get_addr_index(dev, 1);
+	if (IS_ERR(bgp->cfg2_base))
+		return PTR_ERR(bgp->cfg2_base);
+
+	driver_data = (const struct k3_j72xx_bandgap_data *)dev_get_driver_data(dev);
+	if (driver_data)
+		workaround_needed = driver_data->has_errata_i2128;
+
+	/*
+	 * Some of TI's J721E SoCs require a software trimming procedure
+	 * for the temperature monitors to function properly. To determine
+	 * if this particular SoC is NOT affected, both bits in the
+	 * WKUP_SPARE_FUSE0[31:30] will be set (0xC0000000) indicating
+	 * when software trimming should NOT be applied.
+	 *
+	 * https://www.ti.com/lit/er/sprz455c/sprz455c.pdf
+	 */
+	if (workaround_needed) {
+		fuse_base = (void __iomem *)devfdt_get_addr_index(dev, 2);
+		if (IS_ERR(fuse_base))
+			return PTR_ERR(fuse_base);
+
+		if ((readl(fuse_base) & 0xc0000000) == 0xc0000000)
+			workaround_needed = false;
+	}
+
+	debug("Work around %sneeded\n", workaround_needed ? "" : "not ");
+
+	/* Get the sensor count in the VTM */
+	val = readl(bgp->base + K3_VTM_DEVINFO_PWR0_OFFSET);
+	cnt = val & K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK;
+	cnt >>= __ffs(K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK);
+
+	data = devm_kcalloc(bgp->dev, cnt, sizeof(*data), GFP_KERNEL);
+	if (!data) {
+		ret = -ENOMEM;
+		goto err_alloc;
+	}
+
+	ref_table = kzalloc(sizeof(*ref_table) * TABLE_SIZE, GFP_KERNEL);
+	if (!ref_table) {
+		ret = -ENOMEM;
+		goto err_alloc;
+	}
+
+	derived_table = devm_kzalloc(bgp->dev, sizeof(*derived_table) * TABLE_SIZE,
+				     GFP_KERNEL);
+	if (!derived_table) {
+		ret = -ENOMEM;
+		goto err_free_ref_table;
+	}
+
+	if (!workaround_needed)
+		init_table(5, ref_table, golden_factors);
+	else
+		init_table(3, ref_table, pvt_wa_factors);
+
+	/* Register the thermal sensors */
+	for (id = 0; id < cnt; id++) {
+		data[id].bgp = bgp;
+		data[id].ctrl_offset = K3_VTM_TMPSENS0_CTRL_OFFSET + id * 0x20;
+		data[id].stat_offset = data[id].ctrl_offset +
+					K3_VTM_TMPSENS_STAT_OFFSET;
+
+		if (workaround_needed) {
+			/* ref adc values for -40C, 30C & 125C respectively */
+			err_vals.refs[0] = MINUS40CREF;
+			err_vals.refs[1] = PLUS30CREF;
+			err_vals.refs[2] = PLUS125CREF;
+			err_vals.refs[3] = PLUS150CREF;
+			get_efuse_values(id, &data[id], err_vals.errs, fuse_base);
+		}
+
+		if (id == 0 && workaround_needed)
+			prep_lookup_table(&err_vals, ref_table);
+		else if (id == 0 && !workaround_needed)
+			memcpy(derived_table, ref_table, TABLE_SIZE * 4);
+
+		val = readl(data[id].bgp->cfg2_base + data[id].ctrl_offset);
+		val |= (K3_VTM_TMPSENS_CTRL_MAXT_OUTRG_EN |
+			K3_VTM_TMPSENS_CTRL_SOC |
+			K3_VTM_TMPSENS_CTRL_CLRZ | BIT(4));
+		writel(val, data[id].bgp->cfg2_base + data[id].ctrl_offset);
+
+		bgp->ts_data[id] = &data[id];
+	}
+
+	/*
+	 * Program TSHUT thresholds
+	 * Step 1: set the thresholds to ~123C and 105C WKUP_VTM_MISC_CTRL2
+	 * Step 2: WKUP_VTM_TMPSENS_CTRL_j set the MAXT_OUTRG_EN  bit
+	 *         This is already taken care as per of init
+	 * Step 3: WKUP_VTM_MISC_CTRL set the ANYMAXT_OUTRG_ALERT_EN  bit
+	 */
+	high_max = k3_j72xx_bandgap_temp_to_adc_code(MAX_TEMP);
+	low_temp = k3_j72xx_bandgap_temp_to_adc_code(COOL_DOWN_TEMP);
+
+	writel((low_temp << 16) | high_max, data[0].bgp->cfg2_base +
+	       K3_VTM_MISC_CTRL2_OFFSET);
+	mdelay(100);
+	writel(K3_VTM_ANYMAXT_OUTRG_ALERT_EN, data[0].bgp->cfg2_base +
+	       K3_VTM_MISC_CTRL_OFFSET);
+
+	print_look_up_table(dev, ref_table);
+	/*
+	 * Now that the derived_table has the appropriate look up values
+	 * Free up the ref_table
+	 */
+	kfree(ref_table);
+
+	return 0;
+
+err_free_ref_table:
+	kfree(ref_table);
+
+err_alloc:
+
+	return ret;
+}
+
+static const struct k3_j72xx_bandgap_data k3_j72xx_bandgap_j721e_data = {
+	.has_errata_i2128 = true,
+};
+
+static const struct k3_j72xx_bandgap_data k3_j72xx_bandgap_j7200_data = {
+	.has_errata_i2128 = false,
+};
+
+static const struct  udevice_id of_k3_j72xx_bandgap_match[] = {
+	{
+		.compatible = "ti,j721e-vtm",
+		.data = (ulong)&k3_j72xx_bandgap_j721e_data,
+	},
+	{
+		.compatible = "ti,j7200-vtm",
+		.data = (ulong)&k3_j72xx_bandgap_j7200_data,
+	},
+	{ /* sentinel */ },
+};
+
+U_BOOT_DRIVER(ti_bandgap_thermal) = {
+	.name	= "ti_bandgap_thermal",
+	.id	= UCLASS_THERMAL,
+	.ops	= &k3_of_thermal_ops,
+	.probe	= k3_j72xx_bandgap_probe,
+	.of_match = of_k3_j72xx_bandgap_match,
+	.priv_auto	= sizeof(struct k3_j72xx_bandgap),
+};
-- 
2.34.1

Re: [PATCH 1/2] thermal: k3-j72xx-bandgap: Add support for vtm

[Nishanth Menon]

On 11:44-20230901, Udit Kumar wrote:
> Add support for VTM (Voltage and Thermal Manager), which
> is part of TI's K3 series SOC.
> 
> Signed-off-by: Udit Kumar <u-kumar1@ti.com>
> ---
>  drivers/thermal/Kconfig            |   6 +
>  drivers/thermal/Makefile           |   1 +
>  drivers/thermal/k3_j72xx_bandgap.c | 539 +++++++++++++++++++++++++++++
>  3 files changed, 546 insertions(+)
>  create mode 100644 drivers/thermal/k3_j72xx_bandgap.c
> 
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index 681b621760..5ecd916365 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -35,6 +35,12 @@ config IMX_TMU
>  	  The boot is hold to the cool device to throttle CPUs when the
>  	  passive trip is crossed
>  
> +config TI_K3_THERMAL
> +        bool "Temperature sensor driver for TI K3 j7xx SOCs"
> +        help
> +	 Enable thermal support for the Texas Instruments TI K3 j7xx family.
> +	 The driver supports reading CPU temperature.
> +
>  config TI_DRA7_THERMAL
>          bool "Temperature sensor driver for TI dra7xx SOCs"
>          help
> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> index 8acc7d20cb..e2a6d9f877 100644
> --- a/drivers/thermal/Makefile
> +++ b/drivers/thermal/Makefile
> @@ -8,4 +8,5 @@ obj-$(CONFIG_SANDBOX) += thermal_sandbox.o
>  obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o
>  obj-$(CONFIG_IMX_SCU_THERMAL) += imx_scu_thermal.o
>  obj-$(CONFIG_TI_DRA7_THERMAL) += ti-bandgap.o
> +obj-$(CONFIG_TI_K3_THERMAL) += k3_j72xx_bandgap.o
>  obj-$(CONFIG_IMX_TMU) += imx_tmu.o
> diff --git a/drivers/thermal/k3_j72xx_bandgap.c b/drivers/thermal/k3_j72xx_bandgap.c
> new file mode 100644
> index 0000000000..5524bb5c9a
> --- /dev/null
> +++ b/drivers/thermal/k3_j72xx_bandgap.c
> @@ -0,0 +1,539 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * TI Bandgap temperature sensor driver for J72XX SoC Family
> + *
> + * Copyright (C) 2023 Texas Instruments Incorporated - http://www.ti.com/
> + *
> + *
> + * Taken from Linux v6.5 (drivers/thermal/k3_j72xx_bandgap.c)
> + * and ported to uboot
> + */
> +
> +#include <linux/math64.h>
> +#include <dm.h>
> +#include <dm/devres.h>
> +#include <thermal.h>
> +
> +#include <linux/err.h>
> +#include <linux/types.h>
> +#include <linux/io.h>
> +#include <linux/delay.h>
> +
> +#define K3_VTM_DEVINFO_PWR0_OFFSET		0x4
> +#define K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK	0xf0
> +#define K3_VTM_TMPSENS0_CTRL_OFFSET		0x300
> +#define K3_VTM_MISC_CTRL_OFFSET			0xc
> +#define K3_VTM_TMPSENS_STAT_OFFSET		0x8
> +#define K3_VTM_ANYMAXT_OUTRG_ALERT_EN		0x1
> +#define K3_VTM_MISC_CTRL2_OFFSET		0x10
> +#define K3_VTM_TS_STAT_DTEMP_MASK		0x3ff
> +#define K3_VTM_MAX_NUM_TS			8
> +#define K3_VTM_TMPSENS_CTRL_SOC			BIT(5)
> +#define K3_VTM_TMPSENS_CTRL_CLRZ		BIT(6)
> +#define K3_VTM_TMPSENS_CTRL_CLKON_REQ		BIT(7)
> +#define K3_VTM_TMPSENS_CTRL_MAXT_OUTRG_EN	BIT(11)
> +
> +#define K3_VTM_CORRECTION_TEMP_CNT		3
> +
> +#define MINUS40CREF				5
> +#define PLUS30CREF				253
> +#define PLUS125CREF				730
> +#define PLUS150CREF				940
> +
> +#define TABLE_SIZE				1024
> +#define MAX_TEMP				123000
> +#define COOL_DOWN_TEMP				105000
> +
> +#define FACTORS_REDUCTION			13
> +static int *derived_table;
> +
> +static u64 int_pow(u64 base, unsigned int exp)
> +{
> +	u64 result = 1;
> +
> +	while (exp) {
> +		if (exp & 1)
> +			result *= base;
> +		exp >>= 1;
> +		base *= base;
> +	}
> +
> +	return result;
> +}
> +
> +static int compute_value(int index, const s64 *factors, int nr_factors,
> +			 int reduction)
> +{
> +	s64 value = 0;
> +	int i;
> +
> +	for (i = 0; i < nr_factors; i++)
> +		value += factors[i] * int_pow(index, i);
> +
> +	return (int)div64_s64(value, int_pow(10, reduction));
> +}
> +
> +static void init_table(int factors_size, int *table, const s64 *factors)
> +{
> +	int i;
> +
> +	for (i = 0; i < TABLE_SIZE; i++)
> +		table[i] = compute_value(i, factors, factors_size,
> +					 FACTORS_REDUCTION);
> +}
> +
> +/**
> + * struct err_values - structure containing error/reference values
> + * @refs: reference error values for -40C, 30C, 125C & 150C
> + * @errs: Actual error values for -40C, 30C, 125C & 150C read from the efuse
> + */
> +struct err_values {
> +	int refs[4];
> +	int errs[4];
> +};
> +
> +static void create_table_segments(struct err_values *err_vals, int seg,
> +				  int *ref_table)
> +{
> +	int m = 0, c, num, den, i, err, idx1, idx2, err1, err2, ref1, ref2;
> +
> +	if (seg == 0)
> +		idx1 = 0;
> +	else
> +		idx1 = err_vals->refs[seg];
> +
> +	idx2 = err_vals->refs[seg + 1];
> +	err1 = err_vals->errs[seg];
> +	err2 = err_vals->errs[seg + 1];
> +	ref1 = err_vals->refs[seg];
> +	ref2 = err_vals->refs[seg + 1];
> +
> +	/*
> +	 * Calculate the slope with adc values read from the register
> +	 * as the y-axis param and err in adc value as x-axis param
> +	 */
> +	num = ref2 - ref1;
> +	den = err2 - err1;
> +	if (den)
> +		m = num / den;
> +	c = ref2 - m * err2;
> +
> +	/*
> +	 * Take care of divide by zero error if error values are same
> +	 * Or when the slope is 0
> +	 */
> +	if (den != 0 && m != 0) {
> +		for (i = idx1; i <= idx2; i++) {
> +			err = (i - c) / m;
> +			if (((i + err) < 0) || ((i + err) >= TABLE_SIZE))
> +				continue;
> +			derived_table[i] = ref_table[i + err];
> +		}
> +	} else { /* Constant error take care of divide by zero */
> +		for (i = idx1; i <= idx2; i++) {
> +			if (((i + err1) < 0) || ((i + err1) >= TABLE_SIZE))
> +				continue;
> +			derived_table[i] = ref_table[i + err1];
> +		}
> +	}
> +}
> +
> +static int prep_lookup_table(struct err_values *err_vals, int *ref_table)
> +{
> +	int inc, i, seg;
> +
> +	/*
> +	 * Fill up the lookup table under 3 segments
> +	 * region -40C to +30C
> +	 * region +30C to +125C
> +	 * region +125C to +150C
> +	 */
> +	for (seg = 0; seg < 3; seg++)
> +		create_table_segments(err_vals, seg, ref_table);
> +
> +	/* Get to the first valid temperature */
> +	i = 0;
> +	while (!derived_table[i])
> +		i++;
> +
> +	/*
> +	 * Get to the last zero index and back fill the temperature for
> +	 * sake of continuity
> +	 */
> +	if (i) {
> +		/* 300 milli celsius steps */
> +		while (i--)
> +			derived_table[i] = derived_table[i + 1] - 300;
> +	}
> +
> +	/*
> +	 * Fill the last trailing 0s which are unfilled with increments of
> +	 * 100 milli celsius till 1023 code
> +	 */
> +	i = TABLE_SIZE - 1;
> +	while (!derived_table[i])
> +		i--;
> +
> +	i++;
> +	inc = 1;
> +	while (i < TABLE_SIZE) {
> +		derived_table[i] = derived_table[i - 1] + inc * 100;
> +		i++;
> +	}
> +
> +	return 0;
> +}
> +
> +struct k3_thermal_data;
> +
> +struct k3_j72xx_bandgap {
> +	struct udevice *dev;
> +	void __iomem *base;
> +	void __iomem *cfg2_base;
> +	struct k3_thermal_data *ts_data[K3_VTM_MAX_NUM_TS];
> +};
> +
> +/* common data structures */
> +struct k3_thermal_data {
> +	struct k3_j72xx_bandgap *bgp;
> +	u32 ctrl_offset;
> +	u32 stat_offset;
> +};
> +
> +static int two_cmp(int tmp, int mask)
> +{
> +	tmp = ~(tmp);
> +	tmp &= mask;
> +	tmp += 1;
> +
> +	/* Return negative value */
> +	return (0 - tmp);
> +}
> +
> +static unsigned int vtm_get_best_value(unsigned int s0, unsigned int s1,
> +				       unsigned int s2)
> +{
> +	int d01 = abs(s0 - s1);
> +	int d02 = abs(s0 - s2);
> +	int d12 = abs(s1 - s2);
> +
> +	if (d01 <= d02 && d01 <= d12)
> +		return (s0 + s1) / 2;
> +
> +	if (d02 <= d01 && d02 <= d12)
> +		return (s0 + s2) / 2;
> +
> +	return (s1 + s2) / 2;
> +}
> +
> +static inline int k3_bgp_read_temp(struct k3_j72xx_bandgap *bgp,
> +				   int *temp)
> +{
> +	unsigned int dtemp, s0, s1, s2;
> +
> +	/*
> +	 * Errata is applicable for am654 pg 1.0 silicon/J7ES. There
> +	 * is a variation of the order for certain degree centigrade on AM654.
> +	 * Work around that by getting the average of two closest
> +	 * readings out of three readings everytime we want to
> +	 * report temperatures.
> +	 *
> +	 * Errata workaround.
> +	 */
> +	s0 = readl(bgp->base + bgp->ts_data[0]->stat_offset) &
> +		K3_VTM_TS_STAT_DTEMP_MASK;
> +	s1 = readl(bgp->base + bgp->ts_data[0]->stat_offset) &
> +		K3_VTM_TS_STAT_DTEMP_MASK;
> +	s2 = readl(bgp->base + bgp->ts_data[0]->stat_offset) &
> +		K3_VTM_TS_STAT_DTEMP_MASK;
> +	dtemp = vtm_get_best_value(s0, s1, s2);
> +
> +	if (dtemp < 0 || dtemp >= TABLE_SIZE)
> +		return -EINVAL;
> +
> +	*temp = derived_table[dtemp];
> +
> +	return 0;
> +}
> +
> +/* Get temperature callback function for thermal zone */
> +static int k3_thermal_get_temp(struct udevice *dev,  int *temp)
> +{
> +	struct k3_j72xx_bandgap *bgp = dev_get_priv(dev);
> +
> +	return k3_bgp_read_temp(bgp, temp);
> +}
> +
> +static const struct dm_thermal_ops k3_of_thermal_ops = {
> +	.get_temp = k3_thermal_get_temp,
> +};
> +
> +static int k3_j72xx_bandgap_temp_to_adc_code(int temp)
> +{
> +	int low = 0, high = TABLE_SIZE - 1, mid;
> +
> +	if (temp > 160000 || temp < -50000)
> +		return -EINVAL;
> +
> +	/* Binary search to find the adc code */
> +	while (low < (high - 1)) {
> +		mid = (low + high) / 2;
> +		if (temp <= derived_table[mid])
> +			high = mid;
> +		else
> +			low = mid;
> +	}
> +
> +	return mid;
> +}
> +
> +static void get_efuse_values(int id, struct k3_thermal_data *data, int *err,
> +			     void __iomem *fuse_base)
> +{
> +	int i, tmp, pow;
> +	int ct_offsets[5][K3_VTM_CORRECTION_TEMP_CNT] = {
> +		{ 0x0, 0x8, 0x4 },
> +		{ 0x0, 0x8, 0x4 },
> +		{ 0x0, -1,  0x4 },
> +		{ 0x0, 0xC, -1 },
> +		{ 0x0, 0xc, 0x8 }
> +	};
> +	int ct_bm[5][K3_VTM_CORRECTION_TEMP_CNT] = {
> +		{ 0x3f, 0x1fe000, 0x1ff },
> +		{ 0xfc0, 0x1fe000, 0x3fe00 },
> +		{ 0x3f000, 0x7f800000, 0x7fc0000 },
> +		{ 0xfc0000, 0x1fe0, 0x1f800000 },
> +		{ 0x3f000000, 0x1fe000, 0x1ff0 }
> +	};
> +
> +	for (i = 0; i < 3; i++) {
> +		/* Extract the offset value using bit-mask */
> +		if (ct_offsets[id][i] == -1 && i == 1) {
> +			/* 25C offset Case of Sensor 2 split between 2 regs */
> +			tmp = (readl(fuse_base + 0x8) & 0xE0000000) >> (29);
> +			tmp |= ((readl(fuse_base + 0xC) & 0x1F) << 3);
> +			pow = tmp & 0x80;
> +		} else if (ct_offsets[id][i] == -1 && i == 2) {
> +			/* 125C Case of Sensor 3 split between 2 regs */
> +			tmp = (readl(fuse_base + 0x4) & 0xF8000000) >> (27);
> +			tmp |= ((readl(fuse_base + 0x8) & 0xF) << 5);
> +			pow = tmp & 0x100;
> +		} else {
> +			tmp = readl(fuse_base + ct_offsets[id][i]);
> +			tmp &= ct_bm[id][i];
> +			tmp = tmp >> __ffs(ct_bm[id][i]);
> +
> +			/* Obtain the sign bit pow*/
> +			pow = ct_bm[id][i] >> __ffs(ct_bm[id][i]);
> +			pow += 1;
> +			pow /= 2;
> +		}
> +
> +		/* Check for negative value */
> +		if (tmp & pow) {
> +			/* 2's complement value */
> +			tmp = two_cmp(tmp, ct_bm[id][i] >> __ffs(ct_bm[id][i]));
> +		}
> +		err[i] = tmp;
> +	}
> +
> +	/* Err value for 150C is set to 0 */
> +	err[i] = 0;
> +}
> +
> +static void print_look_up_table(struct udevice *dev, int *ref_table)
> +{
> +	int i;
> +
> +	debug("The contents of derived array\n");
> +	debug("Code   Temperature\n");
> +	for (i = 0; i < TABLE_SIZE; i++)
> +		debug("%d       %d %d\n", i, derived_table[i], ref_table[i]);
> +}
> +
> +struct k3_j72xx_bandgap_data {
> +	const bool has_errata_i2128;
> +};
> +
> +static int k3_j72xx_bandgap_probe(struct udevice *dev)
> +{
> +	int ret = 0, cnt, val, id;
> +	int high_max, low_temp;
> +	struct k3_j72xx_bandgap *bgp;
> +	struct k3_thermal_data *data;
> +	bool workaround_needed = false;
> +	const struct k3_j72xx_bandgap_data *driver_data;
> +	int *ref_table;
> +	struct err_values err_vals;
> +	void __iomem *fuse_base;
> +
> +	const s64 golden_factors[] = {
> +		-490019999999999936,
> +		3251200000000000,
> +		-1705800000000,
> +		603730000,
> +		-92627,
> +	};
> +
> +	const s64 pvt_wa_factors[] = {
> +		-415230000000000000,
> +		3126600000000000,
> +		-1157800000000,
> +	};
> +	bgp = dev_get_priv(dev);
> +	if (!bgp)
> +		return -ENOMEM;
> +
> +	bgp->dev = dev;
> +	bgp->base = (void __iomem *)devfdt_get_addr_index(dev, 0);
> +	if (IS_ERR(bgp->base))
> +		return PTR_ERR(bgp->base);
> +
> +	bgp->cfg2_base = (void __iomem *)devfdt_get_addr_index(dev, 1);
> +	if (IS_ERR(bgp->cfg2_base))
> +		return PTR_ERR(bgp->cfg2_base);
> +
> +	driver_data = (const struct k3_j72xx_bandgap_data *)dev_get_driver_data(dev);
> +	if (driver_data)
> +		workaround_needed = driver_data->has_errata_i2128;
> +
> +	/*
> +	 * Some of TI's J721E SoCs require a software trimming procedure
> +	 * for the temperature monitors to function properly. To determine
> +	 * if this particular SoC is NOT affected, both bits in the
> +	 * WKUP_SPARE_FUSE0[31:30] will be set (0xC0000000) indicating
> +	 * when software trimming should NOT be applied.
> +	 *
> +	 * https://www.ti.com/lit/er/sprz455c/sprz455c.pdf
> +	 */
> +	if (workaround_needed) {
> +		fuse_base = (void __iomem *)devfdt_get_addr_index(dev, 2);
> +		if (IS_ERR(fuse_base))
> +			return PTR_ERR(fuse_base);
> +
> +		if ((readl(fuse_base) & 0xc0000000) == 0xc0000000)
> +			workaround_needed = false;
> +	}
> +
> +	debug("Work around %sneeded\n", workaround_needed ? "" : "not ");
> +
> +	/* Get the sensor count in the VTM */
> +	val = readl(bgp->base + K3_VTM_DEVINFO_PWR0_OFFSET);
> +	cnt = val & K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK;
> +	cnt >>= __ffs(K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK);
> +
> +	data = devm_kcalloc(bgp->dev, cnt, sizeof(*data), GFP_KERNEL);
> +	if (!data) {
> +		ret = -ENOMEM;
> +		goto err_alloc;
> +	}
> +
> +	ref_table = kzalloc(sizeof(*ref_table) * TABLE_SIZE, GFP_KERNEL);
> +	if (!ref_table) {
> +		ret = -ENOMEM;
> +		goto err_alloc;
> +	}
> +
> +	derived_table = devm_kzalloc(bgp->dev, sizeof(*derived_table) * TABLE_SIZE,
> +				     GFP_KERNEL);
> +	if (!derived_table) {
> +		ret = -ENOMEM;
> +		goto err_free_ref_table;
> +	}
> +
> +	if (!workaround_needed)
> +		init_table(5, ref_table, golden_factors);
> +	else
> +		init_table(3, ref_table, pvt_wa_factors);
> +
> +	/* Register the thermal sensors */
> +	for (id = 0; id < cnt; id++) {
> +		data[id].bgp = bgp;
> +		data[id].ctrl_offset = K3_VTM_TMPSENS0_CTRL_OFFSET + id * 0x20;
> +		data[id].stat_offset = data[id].ctrl_offset +
> +					K3_VTM_TMPSENS_STAT_OFFSET;
> +
> +		if (workaround_needed) {
> +			/* ref adc values for -40C, 30C & 125C respectively */
> +			err_vals.refs[0] = MINUS40CREF;
> +			err_vals.refs[1] = PLUS30CREF;
> +			err_vals.refs[2] = PLUS125CREF;
> +			err_vals.refs[3] = PLUS150CREF;
> +			get_efuse_values(id, &data[id], err_vals.errs, fuse_base);
> +		}
> +
> +		if (id == 0 && workaround_needed)
> +			prep_lookup_table(&err_vals, ref_table);
> +		else if (id == 0 && !workaround_needed)
> +			memcpy(derived_table, ref_table, TABLE_SIZE * 4);
> +
> +		val = readl(data[id].bgp->cfg2_base + data[id].ctrl_offset);
> +		val |= (K3_VTM_TMPSENS_CTRL_MAXT_OUTRG_EN |
> +			K3_VTM_TMPSENS_CTRL_SOC |
> +			K3_VTM_TMPSENS_CTRL_CLRZ | BIT(4));
> +		writel(val, data[id].bgp->cfg2_base + data[id].ctrl_offset);
> +
> +		bgp->ts_data[id] = &data[id];
> +	}
> +
> +	/*
> +	 * Program TSHUT thresholds
> +	 * Step 1: set the thresholds to ~123C and 105C WKUP_VTM_MISC_CTRL2
> +	 * Step 2: WKUP_VTM_TMPSENS_CTRL_j set the MAXT_OUTRG_EN  bit
> +	 *         This is already taken care as per of init
> +	 * Step 3: WKUP_VTM_MISC_CTRL set the ANYMAXT_OUTRG_ALERT_EN  bit
> +	 */
> +	high_max = k3_j72xx_bandgap_temp_to_adc_code(MAX_TEMP);
> +	low_temp = k3_j72xx_bandgap_temp_to_adc_code(COOL_DOWN_TEMP);
> +
> +	writel((low_temp << 16) | high_max, data[0].bgp->cfg2_base +
> +	       K3_VTM_MISC_CTRL2_OFFSET);
> +	mdelay(100);
> +	writel(K3_VTM_ANYMAXT_OUTRG_ALERT_EN, data[0].bgp->cfg2_base +
> +	       K3_VTM_MISC_CTRL_OFFSET);
> +
> +	print_look_up_table(dev, ref_table);
> +	/*
> +	 * Now that the derived_table has the appropriate look up values
> +	 * Free up the ref_table
> +	 */
> +	kfree(ref_table);
> +
> +	return 0;
> +
> +err_free_ref_table:
> +	kfree(ref_table);
> +
> +err_alloc:
> +
> +	return ret;
> +}
> +
> +static const struct k3_j72xx_bandgap_data k3_j72xx_bandgap_j721e_data = {
> +	.has_errata_i2128 = true,
> +};
> +
> +static const struct k3_j72xx_bandgap_data k3_j72xx_bandgap_j7200_data = {
> +	.has_errata_i2128 = false,
> +};
> +
> +static const struct  udevice_id of_k3_j72xx_bandgap_match[] = {
> +	{
> +		.compatible = "ti,j721e-vtm",
> +		.data = (ulong)&k3_j72xx_bandgap_j721e_data,

So what happens to drivers/misc/k3_avs.c ?
> +	},
> +	{
> +		.compatible = "ti,j7200-vtm",
> +		.data = (ulong)&k3_j72xx_bandgap_j7200_data,
> +	},
> +	{ /* sentinel */ },
> +};
> +
> +U_BOOT_DRIVER(ti_bandgap_thermal) = {
> +	.name	= "ti_bandgap_thermal",
> +	.id	= UCLASS_THERMAL,
> +	.ops	= &k3_of_thermal_ops,
> +	.probe	= k3_j72xx_bandgap_probe,
> +	.of_match = of_k3_j72xx_bandgap_match,
> +	.priv_auto	= sizeof(struct k3_j72xx_bandgap),
> +};
> -- 
> 2.34.1
> 

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D

Re: [PATCH 1/2] thermal: k3-j72xx-bandgap: Add support for vtm

[Kumar, Udit]

Hi Nishanth

On 9/1/2023 8:36 PM, Nishanth Menon wrote:
> On 11:44-20230901, Udit Kumar wrote:
>> Add support for VTM (Voltage and Thermal Manager), which
>> is part of TI's K3 series SOC.
>>
>> Signed-off-by: Udit Kumar <u-kumar1@ti.com>
>> ---
>>   drivers/thermal/Kconfig            |   6 +
>>   drivers/thermal/Makefile           |   1 +
>>   drivers/thermal/k3_j72xx_bandgap.c | 539 +++++++++++++++++++++++++++++
>>   3 files changed, 546 insertions(+)
>>   create mode 100644 drivers/thermal/k3_j72xx_bandgap.c
>>
>> [..]
>> +
>> +static const struct  udevice_id of_k3_j72xx_bandgap_match[] = {
>> +	{
>> +		.compatible = "ti,j721e-vtm",
>> +		.data = (ulong)&k3_j72xx_bandgap_j721e_data,
> So what happens to drivers/misc/k3_avs.c ?

Could you help me to understand this comment.

Do you mean, why we can not add this support in AVS driver or

need of this porting ?

How I see, AVS driver to run at SPL/R5 time and this driver

to be probed in Main/A72 u-boot when needed.

>> +	},
>> +	{
>> +		.compatible = "ti,j7200-vtm",
>> +		.data = (ulong)&k3_j72xx_bandgap_j7200_data,
>> +	},
>> +	{ /* sentinel */ },
>> +};
>> +
>> +U_BOOT_DRIVER(ti_bandgap_thermal) = {
>> +	.name	= "ti_bandgap_thermal",
>> +	.id	= UCLASS_THERMAL,
>> +	.ops	= &k3_of_thermal_ops,
>> +	.probe	= k3_j72xx_bandgap_probe,
>> +	.of_match = of_k3_j72xx_bandgap_match,
>> +	.priv_auto	= sizeof(struct k3_j72xx_bandgap),
>> +};
>> -- 
>> 2.34.1
>>

Re: [PATCH 1/2] thermal: k3-j72xx-bandgap: Add support for vtm

[Nishanth Menon]

On 22:54-20230901, Kumar, Udit wrote:
> > > +static const struct  udevice_id of_k3_j72xx_bandgap_match[] = {
> > > +	{
> > > +		.compatible = "ti,j721e-vtm",
> > > +		.data = (ulong)&k3_j72xx_bandgap_j721e_data,
> > So what happens to drivers/misc/k3_avs.c ?
> 
> Could you help me to understand this comment.
> 
> Do you mean, why we can not add this support in AVS driver or
> 
> need of this porting ?
> 
> How I see, AVS driver to run at SPL/R5 time and this driver
> 
> to be probed in Main/A72 u-boot when needed.
you are saying the drivers are mutually exclusive - how about detecting
over-temp scenario at R5 boot? switching on A53 will be a mistake at
that point, no?

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D

Re: [PATCH 1/2] thermal: k3-j72xx-bandgap: Add support for vtm

[Kumar, Udit]

On 9/1/2023 11:03 PM, Nishanth Menon wrote:
> On 22:54-20230901, Kumar, Udit wrote:
>>>> +static const struct  udevice_id of_k3_j72xx_bandgap_match[] = {
>>>> +	{
>>>> +		.compatible = "ti,j721e-vtm",
>>>> +		.data = (ulong)&k3_j72xx_bandgap_j721e_data,
>>> So what happens to drivers/misc/k3_avs.c ?
>> Could you help me to understand this comment.
>>
>> Do you mean, why we can not add this support in AVS driver or
>>
>> need of this porting ?
>>
>> How I see, AVS driver to run at SPL/R5 time and this driver
>>
>> to be probed in Main/A72 u-boot when needed.
> you are saying the drivers are mutually exclusive - how about detecting
> over-temp scenario at R5 boot? switching on A53 will be a mistake at
> that point, no?

Yes these are  mutually exclusive.

Let me see, how I can add TSHUT value programming in avs driver to avoid 
above.

But in case, temperature reading is needed from u-boot shell, we still 
need this code.

Re: [PATCH 1/2] thermal: k3-j72xx-bandgap: Add support for vtm

[Nishanth Menon]

On 23:43-20230901, Kumar, Udit wrote:
> 
> On 9/1/2023 11:03 PM, Nishanth Menon wrote:
> > On 22:54-20230901, Kumar, Udit wrote:
> > > > > +static const struct  udevice_id of_k3_j72xx_bandgap_match[] = {
> > > > > +	{
> > > > > +		.compatible = "ti,j721e-vtm",
> > > > > +		.data = (ulong)&k3_j72xx_bandgap_j721e_data,
> > > > So what happens to drivers/misc/k3_avs.c ?
> > > Could you help me to understand this comment.
> > > 
> > > Do you mean, why we can not add this support in AVS driver or
> > > 
> > > need of this porting ?
> > > 
> > > How I see, AVS driver to run at SPL/R5 time and this driver
> > > 
> > > to be probed in Main/A72 u-boot when needed.
> > you are saying the drivers are mutually exclusive - how about detecting
> > over-temp scenario at R5 boot? switching on A53 will be a mistake at
> > that point, no?
> 
> Yes these are  mutually exclusive.
> 
> Let me see, how I can add TSHUT value programming in avs driver to avoid
> above.
> 
> But in case, temperature reading is needed from u-boot shell, we still need
> this code.

One approach might be to merge the two.

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D

Re: [PATCH 1/2] thermal: k3-j72xx-bandgap: Add support for vtm

[Kumar, Udit]

Hi Nishanth,

On 9/2/2023 12:40 AM, Nishanth Menon wrote:
> On 23:43-20230901, Kumar, Udit wrote:
>> On 9/1/2023 11:03 PM, Nishanth Menon wrote:
>>> On 22:54-20230901, Kumar, Udit wrote:
>>>>>> +static const struct  udevice_id of_k3_j72xx_bandgap_match[] = {
>>>>>> +	{
>>>>>> +		.compatible = "ti,j721e-vtm",
>>>>>> +		.data = (ulong)&k3_j72xx_bandgap_j721e_data,
>>>>> So what happens to drivers/misc/k3_avs.c ?
>>>> Could you help me to understand this comment.
>>>>
>>>> Do you mean, why we can not add this support in AVS driver or
>>>>
>>>> need of this porting ?
>>>>
>>>> How I see, AVS driver to run at SPL/R5 time and this driver
>>>>
>>>> to be probed in Main/A72 u-boot when needed.
>>> you are saying the drivers are mutually exclusive - how about detecting
>>> over-temp scenario at R5 boot? switching on A53 will be a mistake at
>>> that point, no?
>> Yes these are  mutually exclusive.
>>
>> Let me see, how I can add TSHUT value programming in avs driver to avoid
>> above.
>>
>> But in case, temperature reading is needed from u-boot shell, we still need
>> this code.
> One approach might be to merge the two.

I think merging of these two feature could be done in one file, as one 
driver or two.

But on execution/feature side, from R5/SPL we need to set voltage for 
A72 (OPP or AVS)  before

releasing A72 core. Also can program TSHUT value for thermal overrun 
protection.

For A72/Main u-boot, provide function of temperature reporting from shell.

[PATCH 2/2] DONOTMERGE: j7200: device tree and defconfig update

[Udit Kumar]

Enable VTM node in device tree and update defconfig for vtm.

Signed-off-by: Udit Kumar <u-kumar1@ti.com>
---
 arch/arm/dts/k3-j7200-mcu-wakeup.dtsi | 9 +++++++++
 configs/j7200_evm_a72_defconfig       | 3 +++
 2 files changed, 12 insertions(+)

diff --git a/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi b/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi
index 1044ec6c4b..5e647a7cf2 100644
--- a/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi
@@ -53,6 +53,15 @@
 		reg = <0x00 0x43000014 0x00 0x4>;
 	};
 
+	wkup_vtm: temperature-sensor@42040000 {
+		compatible = "ti,j7200-vtm";
+		reg = <0x00 0x42040000 0x00 0x350>,
+		<0x00 0x42050000 0x00 0x350>,
+		<0x00 0x43000300 0x00 0x10>;
+		power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
+		#thermal-sensor-cells = <1>;
+	};
+
 	wkup_pmx0: pinctrl@4301c000 {
 		compatible = "pinctrl-single";
 		/* Proxy 0 addressing */
diff --git a/configs/j7200_evm_a72_defconfig b/configs/j7200_evm_a72_defconfig
index ad8492a17e..b4b99dc863 100644
--- a/configs/j7200_evm_a72_defconfig
+++ b/configs/j7200_evm_a72_defconfig
@@ -178,6 +178,9 @@ CONFIG_CADENCE_QSPI=y
 CONFIG_HAS_CQSPI_REF_CLK=y
 CONFIG_CQSPI_REF_CLK=133333333
 CONFIG_SYSRESET=y
+CONFIG_DM_THERMAL=y
+CONFIG_TI_K3_THERMAL=y
+CONFIG_CMD_TEMPERATURE=y
 CONFIG_SPL_SYSRESET=y
 CONFIG_SYSRESET_TI_SCI=y
 CONFIG_USB=y
-- 
2.34.1