From: Durai Manickam KR <durai.manickamkr@microchip.com>
To: <u-boot@lists.denx.de>
Cc: <durai.manickamkr@microchip.com>, <hari.prasathge@microchip.com>,
<varshini.rajendran@microchip.com>,
<cristian.birsan@microchip.com>, <nicolas.ferre@microchip.com>,
<balamanikandan.gunasundar@microchip.com>
Subject: [PATCH 2/4] configs: at91: sam9x60_curiosity: Add sam9x60_curiosity_nandflash_defconfig
Date: Thu, 21 Sep 2023 22:36:29 +0530 [thread overview]
Message-ID: <20230921170631.45752-3-durai.manickamkr@microchip.com> (raw)
In-Reply-To: <20230921170631.45752-1-durai.manickamkr@microchip.com>
Add boot from NAND flash support for sam9x60_curiosity.
Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
---
board/atmel/sam9x60_curiosity/MAINTAINERS | 1 +
configs/sam9x60_curiosity_nandflash_defconfig | 92 +++++++++++++++++++
2 files changed, 93 insertions(+)
create mode 100644 configs/sam9x60_curiosity_nandflash_defconfig
diff --git a/board/atmel/sam9x60_curiosity/MAINTAINERS b/board/atmel/sam9x60_curiosity/MAINTAINERS
index 0d9369e027..992d3f4024 100644
--- a/board/atmel/sam9x60_curiosity/MAINTAINERS
+++ b/board/atmel/sam9x60_curiosity/MAINTAINERS
@@ -6,3 +6,4 @@ F: board/atmel/sam9x60_curiosity/
F: include/configs/sam9x60_curiosity.h
F: configs/sam9x60_curiosity_mmc_defconfig
F: configs/sam9x60_curiosity_mmc1_defconfig
+F: configs/sam9x60_curiosity_nandflash_defconfig
diff --git a/configs/sam9x60_curiosity_nandflash_defconfig b/configs/sam9x60_curiosity_nandflash_defconfig
new file mode 100644
index 0000000000..4146bf0ac9
--- /dev/null
+++ b/configs/sam9x60_curiosity_nandflash_defconfig
@@ -0,0 +1,92 @@
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_ARCH_AT91=y
+CONFIG_TEXT_BASE=0x23f00000
+CONFIG_SYS_MALLOC_LEN=0x81000
+CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_TARGET_SAM9X60_CURIOSITY=y
+CONFIG_ATMEL_LEGACY=y
+CONFIG_NR_DRAM_BANKS=8
+CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="at91-sam9x60_curiosity"
+CONFIG_SYS_PROMPT="U-Boot> "
+CONFIG_DEBUG_UART_BASE=0xfffff200
+CONFIG_DEBUG_UART_CLOCK=200000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_ENV_OFFSET_REDUND=0x100000
+CONFIG_SYS_LOAD_ADDR=0x22000000
+CONFIG_DEBUG_UART=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000bf00
+CONFIG_FIT=y
+CONFIG_NAND_BOOT=y
+CONFIG_BOOTDELAY=3
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256k(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=12 root=ubi0:rootfs rw"
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="nand read 0x22000000 0x200000 0x600000; nand read 0x21000000 0x180000 0x20000; bootz 0x22000000 - 0x21000000"
+CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_MISC_INIT_R=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_CBSIZE=256
+CONFIG_SYS_PBSIZE=281
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_DM=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_NAND_TRIMFFS=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_BOOTP_BOOTFILESIZE=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_HASH=y
+CONFIG_HASH_VERIFY=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_UBI=y
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_IS_IN_NAND=y
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_CLK=y
+CONFIG_CLK_CCF=y
+CONFIG_CLK_AT91=y
+CONFIG_AT91_GENERIC_CLK=y
+CONFIG_AT91_SAM9X60_PLL=y
+CONFIG_CPU=y
+CONFIG_AT91_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_AT91=y
+CONFIG_ATMEL_EBI=y
+CONFIG_MFD_ATMEL_SMC=y
+CONFIG_I2C_EEPROM=y
+CONFIG_MICROCHIP_FLEXCOM=y
+CONFIG_GENERIC_ATMEL_MCI=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+# CONFIG_SYS_NAND_USE_FLASH_BBT is not set
+CONFIG_DM_NAND_ATMEL=y
+CONFIG_SYS_NAND_ONFI_DETECTION=y
+CONFIG_PHY_MICREL=y
+CONFIG_MACB=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_AT91=y
+CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_ATMEL_USART=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_AT91=y
+CONFIG_TIMER=y
+CONFIG_MCHP_PIT64B_TIMER=y
+CONFIG_W1=y
+CONFIG_W1_GPIO=y
+CONFIG_W1_EEPROM=y
+CONFIG_W1_EEPROM_DS24XXX=y
+CONFIG_OF_LIBFDT_OVERLAY=y
--
2.25.1
next prev parent reply other threads:[~2023-09-21 17:18 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-21 17:06 [PATCH 0/4] Add support for sam9x60 curiosity Durai Manickam KR
2023-09-21 17:06 ` [PATCH 1/4] configs: at91: sam9x60_curiosity: update sam9x60_curiosity_mmc_defconfig Durai Manickam KR
2023-09-21 17:06 ` Durai Manickam KR [this message]
2023-09-21 17:06 ` [PATCH 3/4] ARM: dts: at91: sam9x60_curiosity: Enable NAND support Durai Manickam KR
2023-09-21 17:06 ` [PATCH 4/4] ARM: dts: at91: sam9x60_curiosity: fix eeprom compatible Durai Manickam KR
2023-09-22 7:00 ` [PATCH 0/4] Add support for sam9x60 curiosity Alexander Dahl
2023-09-22 15:50 ` Tom Rini
2023-09-26 6:13 ` Durai.ManickamKR
2023-10-25 8:28 ` Eugen Hristev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230921170631.45752-3-durai.manickamkr@microchip.com \
--to=durai.manickamkr@microchip.com \
--cc=balamanikandan.gunasundar@microchip.com \
--cc=cristian.birsan@microchip.com \
--cc=hari.prasathge@microchip.com \
--cc=nicolas.ferre@microchip.com \
--cc=u-boot@lists.denx.de \
--cc=varshini.rajendran@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox