From: Roger Quadros <rogerq@kernel.org>
To: trini@konsulko.com, nm@ti.com
Cc: vigneshr@ti.com, m-chawdhry@ti.com, sjg@chromium.org,
jonas@kwiboo.se, srk@ti.com, afd@ti.com, bb@ti.com,
praneeth@ti.com, u-boot@lists.denx.de,
Roger Quadros <rogerq@kernel.org>
Subject: [PATCH 4/6] arm: dts: k3-am642-sk: Mark dependent nodes for pre-relocation phase
Date: Fri, 29 Sep 2023 16:46:44 +0300 [thread overview]
Message-ID: <20230929134646.214781-5-rogerq@kernel.org> (raw)
In-Reply-To: <20230929134646.214781-1-rogerq@kernel.org>
CPSW node needs PHY, MDIO, pinmux, DMA and INTC nodes.
Mark them as 'bootph-all' so they are available in all
pre-relocation phases.
Fixes below dts warnings:
<stdout>: Warning (reg_format): /bus@f4000/ethernet@8000000/mdio@f00/ethernet-phy@1:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
<stdout>: Warning (unit_address_vs_reg): /bus@f4000/ethernet@8000000/mdio@f00: node has a unit name, but no reg or ranges property
<stdout>: Warning (pci_device_reg): Failed prerequisite 'reg_format'
<stdout>: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
<stdout>: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
<stdout>: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
<stdout>: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
<stdout>: Warning (avoid_default_addr_size): /bus@f4000/ethernet@8000000/mdio@f00/ethernet-phy@1: Relying on default #address-cells value
<stdout>: Warning (avoid_default_addr_size): /bus@f4000/ethernet@8000000/mdio@f00/ethernet-phy@1: Relying on default #size-cells value
<stdout>: Warning (avoid_unnecessary_addr_size): Failed prerequisite 'avoid_default_addr_size'
<stdout>: Warning (unique_unit_address): Failed prerequisite 'avoid_default_addr_size'
<stdout>: Warning (msi_parent_property): /bus@f4000/bus@48000000/dma-controller@485c0100:msi-parent: Could not get phandle node for (cell 0)
<stdout>: Warning (msi_parent_property): /bus@f4000/bus@48000000/dma-controller@485c0000:msi-parent: Could not get phandle node for (cell 0)
<stdout>: Warning (phys_property): /bus@f4000/ethernet@8000000/ethernet-ports/port@2:phys: Could not get phandle node for (cell 0)
Signed-off-by: Roger Quadros <rogerq@kernel.org>
---
arch/arm/dts/k3-am642-sk-u-boot.dtsi | 36 ++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/arch/arm/dts/k3-am642-sk-u-boot.dtsi b/arch/arm/dts/k3-am642-sk-u-boot.dtsi
index 5599977f6c..40a53df0b0 100644
--- a/arch/arm/dts/k3-am642-sk-u-boot.dtsi
+++ b/arch/arm/dts/k3-am642-sk-u-boot.dtsi
@@ -92,6 +92,38 @@
bootph-all;
};
+&inta_main_dmss {
+ bootph-all;
+};
+
+&main_pktdma {
+ bootph-all;
+};
+
+&mdio1_pins_default {
+ bootph-all;
+};
+
+&cpsw3g_mdio {
+ bootph-all;
+};
+
+&cpsw3g_phy0 {
+ bootph-all;
+};
+
+&cpsw3g_phy1 {
+ bootph-all;
+};
+
+&rgmii1_pins_default {
+ bootph-all;
+};
+
+&rgmii2_pins_default {
+ bootph-all;
+};
+
&cpsw3g {
bootph-all;
@@ -100,6 +132,10 @@
};
};
+&phy_gmii_sel {
+ bootph-all;
+};
+
&cpsw_port2 {
bootph-all;
};
--
2.34.1
next prev parent reply other threads:[~2023-09-29 13:47 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-29 13:46 [RESEND PATCH 0/6] arm: dts: k3-am64 / k3-am62: Fix boot Roger Quadros
2023-09-29 13:46 ` [PATCH 1/6] arm: dts: k3-am64-evm: " Roger Quadros
2023-10-02 15:19 ` Nishanth Menon
2023-10-02 16:14 ` Roger Quadros
2023-10-02 16:19 ` Nishanth Menon
2023-10-05 14:49 ` Tom Rini
2023-09-29 13:46 ` [PATCH 2/6] arm: dts: k3-am64-evm: Mark dependent nodes for pre-relocation phase Roger Quadros
2023-10-02 15:20 ` Nishanth Menon
2023-09-29 13:46 ` [PATCH 3/6] arm: dts: k3-am642-sk: Fix boot Roger Quadros
2023-10-02 15:20 ` Nishanth Menon
2023-09-29 13:46 ` Roger Quadros [this message]
2023-10-02 15:20 ` [PATCH 4/6] arm: dts: k3-am642-sk: Mark dependent nodes for pre-relocation phase Nishanth Menon
2023-09-29 13:46 ` [PATCH 5/6] arm: dts: k3-am625-sk: Fix boot Roger Quadros
2023-10-02 15:20 ` Nishanth Menon
2023-09-29 13:46 ` [PATCH 6/6] arm: dts: k3-am625-sk: Mark dependent nodes for pre-relocation phase Roger Quadros
2023-10-02 15:20 ` Nishanth Menon
2023-10-03 20:26 ` [PATCH] arm: dts: k3-am625-beagleplay: Fix boot Jan Kiszka
2023-10-04 10:01 ` Roger Quadros
2023-10-04 12:15 ` Nishanth Menon
2023-10-05 4:18 ` Jan Kiszka
2023-10-05 11:27 ` Nishanth Menon
2023-10-05 14:49 ` Tom Rini
2023-10-05 14:52 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230929134646.214781-5-rogerq@kernel.org \
--to=rogerq@kernel.org \
--cc=afd@ti.com \
--cc=bb@ti.com \
--cc=jonas@kwiboo.se \
--cc=m-chawdhry@ti.com \
--cc=nm@ti.com \
--cc=praneeth@ti.com \
--cc=sjg@chromium.org \
--cc=srk@ti.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox