From: Nishanth Menon <nm@ti.com>
To: <trini@konsulko.com>
Cc: <vigneshr@ti.com>, <m-chawdhry@ti.com>, <sjg@chromium.org>,
<jonas@kwiboo.se>, <afd@ti.com>, <bb@ti.com>, <praneeth@ti.com>,
<u-boot@lists.denx.de>, Roger Quadros <rogerq@kernel.org>,
Robert Nelson <robertcnelson@gmail.com>,
Nishanth Menon <nm@ti.com>
Subject: [PATCH] arm: dts: k3-am625-beagleplay: Fix Boot
Date: Mon, 2 Oct 2023 10:00:53 -0500 [thread overview]
Message-ID: <20231002150053.2930710-1-nm@ti.com> (raw)
Since commit [1] A53 u-boot proper is broken. This is because nodes
marked as 'bootph-pre-ram' are not available at u-boot proper before
relocation.
To fix this we mark all nodes in u-boot.dtsi as 'bootph-all'.
[1]
9e644284ab812 ("dm: core: Report bootph-pre-ram/sram node as pre-reloc after relocation")
Reported-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
---
Based on Roger's series:
https://lore.kernel.org/all/20230929134646.214781-1-rogerq@kernel.org/
Based on:
next e29b932aa07f Merge branch '2023-09-30-Kconfig-updates' into next
See discussion thread:
https://lore.kernel.org/all/CAPnjgZ3MgWX8T0A0SofphEr_Xd77pE3hte9DNye1RuBVeB9N8Q@mail.gmail.com/
arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi | 70 ++++++++++----------
1 file changed, 35 insertions(+), 35 deletions(-)
diff --git a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
index f8c04e8a300a..d6c6baa5518b 100644
--- a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
+++ b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
@@ -14,143 +14,143 @@
};
memory@80000000 {
- bootph-pre-ram;
+ bootph-all;
};
/* Keep the LEDs on by default to indicate life */
leds {
- bootph-pre-ram;
+ bootph-all;
led-0 {
default-state = "on";
- bootph-pre-ram;
+ bootph-all;
};
led-1 {
default-state = "on";
- bootph-pre-ram;
+ bootph-all;
};
led-2 {
default-state = "on";
- bootph-pre-ram;
+ bootph-all;
};
led-3 {
default-state = "on";
- bootph-pre-ram;
+ bootph-all;
};
led-4 {
default-state = "on";
- bootph-pre-ram;
+ bootph-all;
};
};
};
&cbass_main {
- bootph-pre-ram;
+ bootph-all;
};
&main_timer0 {
clock-frequency = <25000000>;
- bootph-pre-ram;
+ bootph-all;
};
&dmss {
- bootph-pre-ram;
+ bootph-all;
};
&secure_proxy_main {
- bootph-pre-ram;
+ bootph-all;
};
&dmsc {
- bootph-pre-ram;
+ bootph-all;
};
&k3_pds {
- bootph-pre-ram;
+ bootph-all;
};
&k3_clks {
- bootph-pre-ram;
+ bootph-all;
};
&k3_reset {
- bootph-pre-ram;
+ bootph-all;
};
&dmsc {
- bootph-pre-ram;
+ bootph-all;
k3_sysreset: sysreset-controller {
compatible = "ti,sci-sysreset";
- bootph-pre-ram;
+ bootph-all;
};
};
&wkup_conf {
- bootph-pre-ram;
+ bootph-all;
};
&chipid {
- bootph-pre-ram;
+ bootph-all;
};
&main_pmx0 {
- bootph-pre-ram;
+ bootph-all;
};
&main_uart0 {
- bootph-pre-ram;
+ bootph-all;
};
&console_pins_default {
- bootph-pre-ram;
+ bootph-all;
};
&cbass_mcu {
- bootph-pre-ram;
+ bootph-all;
};
&cbass_wakeup {
- bootph-pre-ram;
+ bootph-all;
};
&mcu_pmx0 {
- bootph-pre-ram;
+ bootph-all;
};
&main_i2c0 {
- bootph-pre-ram;
+ bootph-all;
};
&local_i2c_pins_default {
- bootph-pre-ram;
+ bootph-all;
};
&gpio0_pins_default {
- bootph-pre-ram;
+ bootph-all;
};
&main_gpio0 {
- bootph-pre-ram;
+ bootph-all;
};
&main_gpio1 {
- bootph-pre-ram;
+ bootph-all;
};
&sdhci0 {
/* EMMC */
- bootph-pre-ram;
+ bootph-all;
};
&emmc_pins_default {
- bootph-pre-ram;
+ bootph-all;
};
&sd_pins_default {
- bootph-pre-ram;
+ bootph-all;
/* Force to use SDCD card detect pin */
pinctrl-single,pins = <
AM62X_IOPAD(0x023c, PIN_INPUT, 0) /* (A21) MMC1_CMD */
@@ -164,11 +164,11 @@
};
&tps65219 {
- bootph-pre-ram;
+ bootph-all;
};
&sdhci1 {
- bootph-pre-ram;
+ bootph-all;
};
#ifdef CONFIG_TARGET_AM625_A53_EVM
--
2.40.0
next reply other threads:[~2023-10-02 15:01 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-02 15:00 Nishanth Menon [this message]
2023-10-03 9:07 ` [PATCH] arm: dts: k3-am625-beagleplay: Fix Boot Roger Quadros
2023-10-05 14:49 ` Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2023-09-29 13:46 [RESEND PATCH 0/6] arm: dts: k3-am64 / k3-am62: Fix boot Roger Quadros
2023-10-03 20:26 ` [PATCH] arm: dts: k3-am625-beagleplay: " Jan Kiszka
2023-10-04 10:01 ` Roger Quadros
2023-10-04 12:15 ` Nishanth Menon
2023-10-05 4:18 ` Jan Kiszka
2023-10-05 11:27 ` Nishanth Menon
2023-10-05 14:49 ` Tom Rini
2023-10-05 14:52 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231002150053.2930710-1-nm@ti.com \
--to=nm@ti.com \
--cc=afd@ti.com \
--cc=bb@ti.com \
--cc=jonas@kwiboo.se \
--cc=m-chawdhry@ti.com \
--cc=praneeth@ti.com \
--cc=robertcnelson@gmail.com \
--cc=rogerq@kernel.org \
--cc=sjg@chromium.org \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox