[PATCH v3] imx8mp-evk: Add USB0 OTG support

[Fabio Estevam <festevam@gmail.com>]

From: Fabio Estevam <festevam@denx.de>

Add USB0 OTG support.

Currently, the USB0 OTG nodes are not enabled in the Linux kernel
devicetree.

For this reason, enable the USB0 OTG nodes inside imx8mp-evk-u-boot.dtsi
for now.

Also select several useful options such as USB gadget and fastboot.

Tested by running "ums 0 mmc 2".

Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
---
Changes since v2:
- Put the USB nodes in alphabetical order. (Marek)
- Remove unneeded pinctrl entry. (Marek)

 arch/arm/dts/imx8mp-evk-u-boot.dtsi | 13 ++++++++++++
 configs/imx8mp_evk_defconfig        | 31 +++++++++++++++++++++++++++++
 2 files changed, 44 insertions(+)

diff --git a/arch/arm/dts/imx8mp-evk-u-boot.dtsi b/arch/arm/dts/imx8mp-evk-u-boot.dtsi
index 6784ed2e7c..0d2c9a83db 100644
--- a/arch/arm/dts/imx8mp-evk-u-boot.dtsi
+++ b/arch/arm/dts/imx8mp-evk-u-boot.dtsi
@@ -111,6 +111,19 @@
 	bootph-pre-ram;
 };
 
+&usb3_0 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
 &usdhc1 {
 	bootph-pre-ram;
 };
diff --git a/configs/imx8mp_evk_defconfig b/configs/imx8mp_evk_defconfig
index 14c749f443..820dc36e9c 100644
--- a/configs/imx8mp_evk_defconfig
+++ b/configs/imx8mp_evk_defconfig
@@ -59,6 +59,9 @@ CONFIG_CMD_FUSE=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_SDP=y
+CONFIG_CMD_USB_MASS_STORAGE=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_REGULATOR=y
 CONFIG_CMD_EXT4_WRITE=y
@@ -74,6 +77,14 @@ CONFIG_ETHPRIME="eth1"
 CONFIG_SPL_DM=y
 CONFIG_CLK_COMPOSITE_CCF=y
 CONFIG_CLK_IMX8MP=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x42800000
+CONFIG_FASTBOOT_BUF_SIZE=0x20000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_UUU_SUPPORT=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=2
+CONFIG_FASTBOOT_MMC_BOOT_SUPPORT=y
+CONFIG_FASTBOOT_MMC_USER_SUPPORT=y
 CONFIG_MXC_GPIO=y
 CONFIG_DM_PCA953X=y
 CONFIG_DM_I2C=y
@@ -94,10 +105,15 @@ CONFIG_DWC_ETH_QOS=y
 CONFIG_DWC_ETH_QOS_IMX=y
 CONFIG_FEC_MXC=y
 CONFIG_MII=y
+CONFIG_PHY=y
+CONFIG_PHY_IMX8MQ_USB=y
 CONFIG_PINCTRL=y
 CONFIG_SPL_PINCTRL=y
 CONFIG_PINCTRL_IMX8M=y
 CONFIG_SPL_POWER_LEGACY=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_IMX8M_POWER_DOMAIN=y
+CONFIG_IMX8MP_HSIOMIX_BLKCTRL=y
 CONFIG_POWER_PCA9450=y
 CONFIG_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_FIXED=y
@@ -109,4 +125,19 @@ CONFIG_SYSRESET=y
 CONFIG_SPL_SYSRESET=y
 CONFIG_SYSRESET_PSCI=y
 CONFIG_SYSRESET_WATCHDOG=y
+CONFIG_USB=y
+# CONFIG_SPL_DM_USB is not set
+CONFIG_DM_USB_GADGET=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_MX7 is not set
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="FSL"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
+CONFIG_SDP_LOADADDR=0x0
 CONFIG_IMX_WATCHDOG=y
-- 
2.34.1