From: Nishanth Menon <nm@ti.com>
To: Tom Rini <trini@konsulko.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>,
Sinthu Raja <sinthu.raja@ti.com>,
Manorit Chawdhry <m-chawdhry@ti.com>, Reid Tonking <reidt@ti.com>,
Neha Malcom Francis <n-francis@ti.com>, Andrew Davis <afd@ti.com>,
Simon Glass <sjg@chromium.org>,
Robert Nelson <robertcnelson@gmail.com>,
Jason Kridner <jkridner@beagleboard.org>,
Nishanth Menon <nm@ti.com>, <u-boot@lists.denx.de>
Subject: [PATCH V2 12/12] doc: board: ti: j721e_evm: Use board relative path for include directives
Date: Sat, 4 Nov 2023 02:21:50 -0500 [thread overview]
Message-ID: <20231104072150.3339-13-nm@ti.com> (raw)
In-Reply-To: <20231104072150.3339-1-nm@ti.com>
When using include directives within a section that is included by non
TI board rst file, k3.rst and other include paths need to be relative to
doc/board/ base.
Signed-off-by: Nishanth Menon <nm@ti.com>
---
doc/board/ti/j721e_evm.rst | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/doc/board/ti/j721e_evm.rst b/doc/board/ti/j721e_evm.rst
index 344a38d37486..b012171b45ee 100644
--- a/doc/board/ti/j721e_evm.rst
+++ b/doc/board/ti/j721e_evm.rst
@@ -48,7 +48,7 @@ support. Below is the pictorial representation of boot flow:
Sources:
--------
-.. include:: k3.rst
+.. include:: ../ti/k3.rst
:start-after: .. k3_rst_include_start_boot_sources
:end-before: .. k3_rst_include_end_boot_sources
@@ -56,17 +56,17 @@ Build procedure:
----------------
0. Setup the environment variables:
-.. include:: k3.rst
+.. include:: ../ti/k3.rst
:start-after: .. k3_rst_include_start_common_env_vars_desc
:end-before: .. k3_rst_include_end_common_env_vars_desc
-.. include:: k3.rst
+.. include:: ../ti/k3.rst
:start-after: .. k3_rst_include_start_board_env_vars_desc
:end-before: .. k3_rst_include_end_board_env_vars_desc
Set the variables corresponding to this platform:
-.. include:: k3.rst
+.. include:: ../ti/k3.rst
:start-after: .. k3_rst_include_start_common_env_vars_defn
:end-before: .. k3_rst_include_end_common_env_vars_defn
.. prompt:: bash $
@@ -84,14 +84,14 @@ Set the variables corresponding to this platform:
1. Trusted Firmware-A:
-.. include:: k3.rst
+.. include:: ../ti/k3.rst
:start-after: .. k3_rst_include_start_build_steps_tfa
:end-before: .. k3_rst_include_end_build_steps_tfa
2. OP-TEE:
-.. include:: k3.rst
+.. include:: ../ti/k3.rst
:start-after: .. k3_rst_include_start_build_steps_optee
:end-before: .. k3_rst_include_end_build_steps_optee
@@ -99,13 +99,13 @@ Set the variables corresponding to this platform:
* 3.1 R5:
-.. include:: k3.rst
+.. include:: ../ti/k3.rst
:start-after: .. k3_rst_include_start_build_steps_spl_r5
:end-before: .. k3_rst_include_end_build_steps_spl_r5
* 3.2 A72:
-.. include:: k3.rst
+.. include:: ../ti/k3.rst
:start-after: .. k3_rst_include_start_build_steps_uboot
:end-before: .. k3_rst_include_end_build_steps_uboot
.. j721e_evm_rst_include_end_build_steps
@@ -248,7 +248,7 @@ detailed setup information.
environment's distribution needs to be updated, it might be necessary to
build OpenOCD from the source.
-.. include:: k3.rst
+.. include:: ../ti/k3.rst
:start-after: .. k3_rst_include_start_openocd_connect_XDS110
:end-before: .. k3_rst_include_end_openocd_connect_XDS110
--
2.37.2
prev parent reply other threads:[~2023-11-04 7:25 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-04 7:21 [PATCH V2 00/12] board: ti: j721e: cleanup Nishanth Menon
2023-11-04 7:21 ` [PATCH V2 01/12] board: ti: j721e: evm: Drop unused headers Nishanth Menon
2023-11-07 7:02 ` Neha Malcom Francis
2023-11-22 20:49 ` Tom Rini
2023-11-04 7:21 ` [PATCH V2 02/12] board: ti: j721e: evm: Drop board check for ESM Nishanth Menon
2023-11-07 7:06 ` Neha Malcom Francis
2023-11-04 7:21 ` [PATCH V2 03/12] board: ti: j721e: evm: Switch to using IS_ENABLED Nishanth Menon
2023-11-07 7:08 ` Neha Malcom Francis
2023-11-04 7:21 ` [PATCH V2 04/12] board: ti: j721e: j721e.env: Add explicit boot_targets Nishanth Menon
2023-11-07 7:09 ` Neha Malcom Francis
2023-11-04 7:21 ` [PATCH V2 05/12] configs: j721e_evm_a72_defconfig: Switch to bootstd Nishanth Menon
2023-11-07 7:09 ` Neha Malcom Francis
2023-11-04 7:21 ` [PATCH V2 06/12] arm: mach-k3: Kconfig: Introduce a symbol to indicate J7200 Nishanth Menon
2023-11-06 16:45 ` Andrew Davis
2023-11-06 16:50 ` Nishanth Menon
2023-11-04 7:21 ` [PATCH V2 07/12] board: ti: j721e: Select SOC_K3_J721E_J7200 for J7200evm Nishanth Menon
2023-11-04 7:21 ` [PATCH V2 08/12] arm: mach-k3: arm64-mmu: Refactor to be independent of board Nishanth Menon
2023-11-06 16:54 ` Andrew Davis
2023-11-04 7:21 ` [PATCH V2 09/12] arm: mach-k3: j721e: Improve support for UDA FS Nishanth Menon
2023-11-04 7:21 ` [PATCH V2 10/12] configs: j7200: Remove HBMC_AM654 config Nishanth Menon
2023-11-07 7:11 ` Neha Malcom Francis
2023-11-04 7:21 ` [PATCH V2 11/12] configs: j7200_evm_a72_defconfig: Switch to bootstd Nishanth Menon
2023-11-07 7:12 ` Neha Malcom Francis
2023-11-04 7:21 ` Nishanth Menon [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231104072150.3339-13-nm@ti.com \
--to=nm@ti.com \
--cc=afd@ti.com \
--cc=jkridner@beagleboard.org \
--cc=m-chawdhry@ti.com \
--cc=n-francis@ti.com \
--cc=reidt@ti.com \
--cc=robertcnelson@gmail.com \
--cc=sinthu.raja@ti.com \
--cc=sjg@chromium.org \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=xypron.glpk@gmx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox