public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Sean Anderson <seanga2@gmail.com>
To: Tom Rini <trini@konsulko.com>, u-boot@lists.denx.de
Cc: "Simon Glass" <sjg@chromium.org>,
	"Heinrich Schuchardt" <xypron.glpk@gmx.de>,
	"Marek Behún" <marek.behun@nic.cz>, "Marek Vasut" <marex@denx.de>,
	"Xavier Drudis Ferran" <xdrudis@tinet.cat>,
	"Stefan Roese" <sr@denx.de>, "Pali Rohár" <pali@kernel.org>,
	"Sean Anderson" <seanga2@gmail.com>,
	"Jaehoon Chung" <jh80.chung@samsung.com>,
	"Peng Fan" <peng.fan@nxp.com>
Subject: [PATCH v6 17/25] spl: Convert mmc to spl_load
Date: Sun,  5 Nov 2023 21:25:55 -0500	[thread overview]
Message-ID: <20231106022603.3405551-18-seanga2@gmail.com> (raw)
In-Reply-To: <20231106022603.3405551-1-seanga2@gmail.com>

This converts the mmc loader to spl_load. Legacy images are handled by
spl_load (via spl_parse_image_header), so mmc_load_legacy can be
omitted. To accurately determine whether mmc_load_image_raw_sector is used
(which might not be the case if SYS_MMCSD_FS_BOOT is enabled), we introduce
a helper config SYS_MMCSD_RAW_MODE. This ensures we can inline spl_load
correctly when a board only boots from filesystems. We still need to check
for SPL_MMC, since some boards enable configure raw mode even without MMC
support.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
---

Changes in v6:
- Add SYS_MMCSD_RAW_MODE to help determine whether SPL_MMC loads
  anything directly.
- Explicitly initialize load_info members

Changes in v5:
- Rework to load header in spl_load

 common/spl/Kconfig       |  8 ++++
 common/spl/spl_mmc.c     | 89 ++++------------------------------------
 include/spl_load.h       |  1 +
 test/image/spl_load_fs.c |  3 --
 4 files changed, 16 insertions(+), 85 deletions(-)

diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 0bc57d5fedb..b93526904eb 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -481,6 +481,11 @@ config SPL_DISPLAY_PRINT
 	  banner ("U-Boot SPL ..."). This function should be provided by
 	  the board.
 
+config SPL_SYS_MMCSD_RAW_MODE
+	bool
+	help
+	  Support booting from an MMC without a filesystem.
+
 config SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
 	bool "MMC raw mode: by sector"
 	default y if ARCH_SUNXI || ARCH_DAVINCI || ARCH_UNIPHIER || \
@@ -490,6 +495,7 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
 		     OMAP44XX || OMAP54XX || AM33XX || AM43XX || \
 		     TARGET_SIFIVE_UNLEASHED || TARGET_SIFIVE_UNMATCHED
 	select SPL_LOAD_BLOCK if SPL_MMC
+	select SPL_SYS_MMCSD_RAW_MODE if SPL_MMC
 	help
 	  Use sector number for specifying U-Boot location on MMC/SD in
 	  raw mode.
@@ -527,6 +533,7 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET
 config SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
 	bool "MMC Raw mode: by partition"
 	select SPL_LOAD_BLOCK if SPL_MMC
+	select SPL_SYS_MMCSD_RAW_MODE if SPL_MMC
 	help
 	  Use a partition for loading U-Boot when using MMC/SD in raw mode.
 
@@ -1114,6 +1121,7 @@ config SPL_FALCON_BOOT_MMCSD
 	bool "Enable Falcon boot from MMC or SD media"
 	depends on SPL_OS_BOOT && SPL_MMC
 	select SPL_LOAD_BLOCK
+	select SPL_SYS_MMCSD_RAW_MODE
 	help
 	  Select this if the Falcon mode OS image mode is on MMC or SD media.
 
diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c
index 91272c03d3f..3d032bb27ce 100644
--- a/common/spl/spl_mmc.c
+++ b/common/spl/spl_mmc.c
@@ -8,9 +8,9 @@
 #include <common.h>
 #include <dm.h>
 #include <log.h>
-#include <mapmem.h>
 #include <part.h>
 #include <spl.h>
+#include <spl_load.h>
 #include <linux/compiler.h>
 #include <errno.h>
 #include <asm/u-boot.h>
@@ -19,49 +19,6 @@
 #include <image.h>
 #include <imx_container.h>
 
-static int mmc_load_legacy(struct spl_image_info *spl_image,
-			   struct spl_boot_device *bootdev,
-			   struct mmc *mmc,
-			   ulong sector, struct legacy_img_hdr *header)
-{
-	u32 image_offset_sectors;
-	u32 image_size_sectors;
-	unsigned long count;
-	u32 image_offset;
-	int ret;
-
-	ret = spl_parse_image_header(spl_image, bootdev, header);
-	if (ret)
-		return ret;
-
-	/* convert offset to sectors - round down */
-	image_offset_sectors = spl_image->offset / mmc->read_bl_len;
-	/* calculate remaining offset */
-	image_offset = spl_image->offset % mmc->read_bl_len;
-
-	/* convert size to sectors - round up */
-	image_size_sectors = (spl_image->size + mmc->read_bl_len - 1) /
-			     mmc->read_bl_len;
-
-	/* Read the header too to avoid extra memcpy */
-	count = blk_dread(mmc_get_blk_desc(mmc),
-			  sector + image_offset_sectors,
-			  image_size_sectors,
-			  map_sysmem(spl_image->load_addr,
-				     image_size_sectors * mmc->read_bl_len));
-	debug("read %x sectors to %lx\n", image_size_sectors,
-	      spl_image->load_addr);
-	if (count != image_size_sectors)
-		return -EIO;
-
-	if (image_offset)
-		memmove((void *)(ulong)spl_image->load_addr,
-			(void *)(ulong)spl_image->load_addr + image_offset,
-			spl_image->size);
-
-	return 0;
-}
-
 static ulong h_spl_load_read(struct spl_load_info *load, ulong off,
 			     ulong size, void *buf)
 {
@@ -87,46 +44,14 @@ int mmc_load_image_raw_sector(struct spl_image_info *spl_image,
 			      struct spl_boot_device *bootdev,
 			      struct mmc *mmc, unsigned long sector)
 {
-	unsigned long count;
-	struct legacy_img_hdr *header;
+	int ret;
 	struct blk_desc *bd = mmc_get_blk_desc(mmc);
-	int ret = 0;
+	struct spl_load_info load;
 
-	header = spl_get_load_buffer(-sizeof(*header), bd->blksz);
-
-	/* read image header to find the image size & load address */
-	count = blk_dread(bd, sector, 1, header);
-	debug("hdr read sector %lx, count=%lu\n", sector, count);
-	if (count == 0) {
-		ret = -EIO;
-		goto end;
-	}
-
-	if (IS_ENABLED(CONFIG_SPL_LOAD_FIT) &&
-	    image_get_magic(header) == FDT_MAGIC) {
-		struct spl_load_info load;
-
-		debug("Found FIT\n");
-		load.priv = bd;
-		spl_set_bl_len(&load, bd->blksz);
-		load.read = h_spl_load_read;
-		ret = spl_load_simple_fit(spl_image, &load,
-					  sector << bd->log2blksz, header);
-	} else if (IS_ENABLED(CONFIG_SPL_LOAD_IMX_CONTAINER) &&
-		   valid_container_hdr((void *)header)) {
-		struct spl_load_info load;
-
-		load.priv = bd;
-		spl_set_bl_len(&load, bd->blksz);
-		load.read = h_spl_load_read;
-
-		ret = spl_load_imx_container(spl_image, &load,
-					     sector << bd->log2blksz);
-	} else {
-		ret = mmc_load_legacy(spl_image, bootdev, mmc, sector, header);
-	}
-
-end:
+	load.priv = bd;
+	spl_set_bl_len(&load, bd->blksz);
+	load.read = h_spl_load_read;
+	ret = spl_load(spl_image, bootdev, &load, 0, sector << bd->log2blksz);
 	if (ret) {
 #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
 		puts("mmc_load_image_raw_sector: mmc block read error\n");
diff --git a/include/spl_load.h b/include/spl_load.h
index 5e0460d956d..d55a47ae7d7 100644
--- a/include/spl_load.h
+++ b/include/spl_load.h
@@ -97,6 +97,7 @@ static inline int _spl_load(struct spl_image_info *spl_image,
 #define SPL_LOAD_USERS \
 	IS_ENABLED(CONFIG_SPL_FS_EXT4) + \
 	IS_ENABLED(CONFIG_SPL_FS_FAT) + \
+	IS_ENABLED(CONFIG_SPL_SYS_MMCSD_RAW_MODE) + \
 	0
 
 #if SPL_LOAD_USERS > 1
diff --git a/test/image/spl_load_fs.c b/test/image/spl_load_fs.c
index 333df2dfb53..67c19da95e7 100644
--- a/test/image/spl_load_fs.c
+++ b/test/image/spl_load_fs.c
@@ -428,9 +428,6 @@ static int spl_test_mmc(struct unit_test_state *uts, const char *test_name,
 	if (spl_test_mmc_fs(uts, test_name, type, create_fat, false))
 		return CMD_RET_FAILURE;
 
-	if (type == LEGACY_LZMA)
-		return 0;
-
 	return do_spl_test_load(uts, test_name, type,
 				SPL_LOAD_IMAGE_GET(0, BOOT_DEVICE_MMC1,
 						   spl_mmc_load_image),
-- 
2.37.1


  parent reply	other threads:[~2023-11-06  3:04 UTC|newest]

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-11-06  2:25 [PATCH v6 00/25] spl: Use common function for loading/parsing images Sean Anderson
2023-11-06  2:25 ` [PATCH v6 01/25] spl: blk_fs: Fix uninitialized return value when we can't get a blk_desc Sean Anderson
2023-11-08  4:23   ` Simon Glass
2023-11-06  2:25 ` [PATCH v6 02/25] arm: Disable SPL_FS_FAT when it isn't used Sean Anderson
2023-11-06  6:58   ` Michal Simek
2023-11-06  2:25 ` [PATCH v6 03/25] spl: Make SHOW_ERRORS depend on LIBCOMMON Sean Anderson
2023-11-08  4:23   ` Simon Glass
2023-11-06  2:25 ` [PATCH v6 04/25] spl: semihosting: Don't close fd before spl_load_simple_fit Sean Anderson
2023-11-08  4:23   ` Simon Glass
2023-11-06  2:25 ` [PATCH v6 05/25] spl: Remove NULL assignments in spl_load_info Sean Anderson
2023-11-08  4:23   ` Simon Glass
2023-11-08 15:30     ` Sean Anderson
2023-11-06  2:25 ` [PATCH v6 06/25] spl: Remove dev from spl_load_info Sean Anderson
2023-11-08  4:23   ` Simon Glass
2023-11-08 16:19     ` Sean Anderson
2023-11-06  2:25 ` [PATCH v6 07/25] spl: Take advantage of bl_len's power-of-twoness Sean Anderson
2023-11-08  4:23   ` Simon Glass
2023-11-06  2:25 ` [PATCH v6 08/25] spl: Refactor spl_load_info->read to use units of bytes Sean Anderson
2023-11-06 12:35   ` Xavier Drudis Ferran
2023-11-06 13:54     ` Sean Anderson
2023-11-07  8:49       ` Xavier Drudis Ferran
2023-11-08 15:59         ` Sean Anderson
2023-11-09  6:24           ` Xavier Drudis Ferran
2023-11-06  2:25 ` [PATCH v6 09/25] spl: Remove filename from spl_load_info Sean Anderson
2023-11-08  4:23   ` Simon Glass
2023-11-08 15:34     ` Sean Anderson
2023-11-06  2:25 ` [PATCH v6 10/25] spl: Only support bl_len when we have to Sean Anderson
2023-11-08  4:23   ` Simon Glass
2023-11-06  2:25 ` [PATCH v6 11/25] spl: nand: Remove spl_nand_legacy_read Sean Anderson
2023-11-08  4:23   ` Simon Glass
2023-11-06  2:25 ` [PATCH v6 12/25] spl: legacy: Split off LZMA decompression into its own function Sean Anderson
2023-11-08  4:23   ` Simon Glass
2023-11-06  2:25 ` [PATCH v6 13/25] test: spl: Support testing LEGACY_LZMA filesystem images Sean Anderson
2023-11-08  4:23   ` Simon Glass
2023-11-06  2:25 ` [PATCH v6 14/25] spl: Add generic spl_load function Sean Anderson
2023-11-08  4:23   ` Simon Glass
2023-11-06  2:25 ` [PATCH v6 15/25] spl: Convert ext to use spl_load Sean Anderson
2023-11-08  4:24   ` Simon Glass
2023-11-08 15:37     ` Sean Anderson
2023-11-06  2:25 ` [PATCH v6 16/25] spl: Convert fat to spl_load Sean Anderson
2023-11-08  4:24   ` Simon Glass
2023-11-08 15:49     ` Sean Anderson
2023-11-06  2:25 ` Sean Anderson [this message]
2023-11-08  4:24   ` [PATCH v6 17/25] spl: Convert mmc " Simon Glass
2023-11-06  2:25 ` [PATCH v6 18/25] spl: Convert nand " Sean Anderson
2023-11-08  4:24   ` Simon Glass
2023-11-06  2:25 ` [PATCH v6 19/25] spl: Convert net " Sean Anderson
2023-11-08  4:24   ` Simon Glass
2023-11-06  2:25 ` [PATCH v6 20/25] spl: Convert nor " Sean Anderson
2023-11-08  4:24   ` Simon Glass
2023-11-06  2:25 ` [PATCH v6 21/25] spl: Convert NVMe " Sean Anderson
2023-11-08  4:24   ` Simon Glass
2023-11-06  2:26 ` [PATCH v6 22/25] spl: Convert semihosting " Sean Anderson
2023-11-06  2:26 ` [PATCH v6 23/25] spl: Convert spi " Sean Anderson
2023-11-08  4:24   ` Simon Glass
2023-11-06  2:26 ` [PATCH v6 24/25] spl: spi: Consolidate spi_load_image_os into spl_spi_load_image Sean Anderson
2023-11-08  4:24   ` Simon Glass
2023-11-06  2:26 ` [PATCH v6 25/25] spl: fat: Add option to disable DMA alignment Sean Anderson
2023-11-08  4:24   ` Simon Glass
2023-11-06  7:49 ` [PATCH v6 00/25] spl: Use common function for loading/parsing images Pali Rohár
2023-11-06  9:18   ` Heinrich Schuchardt
2023-11-06 10:12   ` Marek Behún

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231106022603.3405551-18-seanga2@gmail.com \
    --to=seanga2@gmail.com \
    --cc=jh80.chung@samsung.com \
    --cc=marek.behun@nic.cz \
    --cc=marex@denx.de \
    --cc=pali@kernel.org \
    --cc=peng.fan@nxp.com \
    --cc=sjg@chromium.org \
    --cc=sr@denx.de \
    --cc=trini@konsulko.com \
    --cc=u-boot@lists.denx.de \
    --cc=xdrudis@tinet.cat \
    --cc=xypron.glpk@gmx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox