From: Sean Anderson <seanga2@gmail.com>
To: Tom Rini <trini@konsulko.com>, u-boot@lists.denx.de
Cc: "Simon Glass" <sjg@chromium.org>,
"Heinrich Schuchardt" <xypron.glpk@gmx.de>,
"Marek Behún" <marek.behun@nic.cz>, "Marek Vasut" <marex@denx.de>,
"Xavier Drudis Ferran" <xdrudis@tinet.cat>,
"Stefan Roese" <sr@denx.de>, "Pali Rohár" <pali@kernel.org>,
"Sean Anderson" <seanga2@gmail.com>,
"Jagan Teki" <jagan@amarulasolutions.com>,
"Vignesh R" <vigneshr@ti.com>
Subject: [PATCH v6 23/25] spl: Convert spi to spl_load
Date: Sun, 5 Nov 2023 21:26:01 -0500 [thread overview]
Message-ID: <20231106022603.3405551-24-seanga2@gmail.com> (raw)
In-Reply-To: <20231106022603.3405551-1-seanga2@gmail.com>
This converts the spi load method to use spl_load. The address used for
LOAD_FIT_FULL may be different, but there are no in-tree users of that
config. Since payload_offs is only used without OS_BOOT, we defer its
initialization.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
---
Changes in v6:
- Fix soft reset after loading from SPI
Changes in v5:
- Rework to load header in spl_load
common/spl/spl_spi.c | 80 +++++++--------------------------------
include/spl_load.h | 1 +
test/image/spl_load_spi.c | 1 +
3 files changed, 15 insertions(+), 67 deletions(-)
diff --git a/common/spl/spl_spi.c b/common/spl/spl_spi.c
index 3e08ac7c1a2..f49e534b749 100644
--- a/common/spl/spl_spi.c
+++ b/common/spl/spl_spi.c
@@ -12,11 +12,11 @@
#include <image.h>
#include <imx_container.h>
#include <log.h>
-#include <mapmem.h>
#include <spi.h>
#include <spi_flash.h>
#include <errno.h>
#include <spl.h>
+#include <spl_load.h>
#include <asm/global_data.h>
#include <asm/io.h>
#include <dm/ofnode.h>
@@ -95,9 +95,9 @@ static int spl_spi_load_image(struct spl_image_info *spl_image,
int err = 0;
unsigned int payload_offs;
struct spi_flash *flash;
- struct legacy_img_hdr *header;
unsigned int sf_bus = spl_spi_boot_bus();
unsigned int sf_cs = spl_spi_boot_cs();
+ struct spl_load_info load;
/*
* Load U-Boot image from SPI flash into RAM
@@ -112,77 +112,23 @@ static int spl_spi_load_image(struct spl_image_info *spl_image,
return -ENODEV;
}
+#if CONFIG_IS_ENABLED(OS_BOOT)
+ if (!spl_start_uboot() && !spi_load_image_os(spl_image, bootdev, flash, header))
+ return 0;
+#endif
+
payload_offs = spl_spi_get_uboot_offs(flash);
-
- header = spl_get_load_buffer(-sizeof(*header), sizeof(*header));
-
if (CONFIG_IS_ENABLED(OF_REAL)) {
payload_offs = ofnode_conf_read_int("u-boot,spl-payload-offset",
payload_offs);
}
-#if CONFIG_IS_ENABLED(OS_BOOT)
- if (spl_start_uboot() || spi_load_image_os(spl_image, bootdev, flash, header))
-#endif
- {
- /* Load u-boot, mkimage header is 64 bytes. */
- err = spi_flash_read(flash, payload_offs, sizeof(*header),
- (void *)header);
- if (err) {
- debug("%s: Failed to read from SPI flash (err=%d)\n",
- __func__, err);
- return err;
- }
-
- if (IS_ENABLED(CONFIG_SPL_LOAD_FIT_FULL) &&
- image_get_magic(header) == FDT_MAGIC) {
- u32 size = roundup(fdt_totalsize(header), 4);
-
- err = spi_flash_read(flash, payload_offs,
- size,
- map_sysmem(CONFIG_SYS_LOAD_ADDR,
- size));
- if (err)
- return err;
- err = spl_parse_image_header(spl_image, bootdev,
- phys_to_virt(CONFIG_SYS_LOAD_ADDR));
- } else if (IS_ENABLED(CONFIG_SPL_LOAD_FIT) &&
- image_get_magic(header) == FDT_MAGIC) {
- struct spl_load_info load;
-
- debug("Found FIT\n");
- load.priv = flash;
- spl_set_bl_len(&load, 1);
- load.read = spl_spi_fit_read;
- err = spl_load_simple_fit(spl_image, &load,
- payload_offs,
- header);
- } else if (IS_ENABLED(CONFIG_SPL_LOAD_IMX_CONTAINER) &&
- valid_container_hdr((void *)header)) {
- struct spl_load_info load;
-
- load.priv = flash;
- spl_set_bl_len(&load, 1);
- load.read = spl_spi_fit_read;
-
- err = spl_load_imx_container(spl_image, &load,
- payload_offs);
- } else {
- err = spl_parse_image_header(spl_image, bootdev, header);
- if (err)
- return err;
- err = spi_flash_read(flash, payload_offs + spl_image->offset,
- spl_image->size,
- map_sysmem(spl_image->load_addr,
- spl_image->size));
- }
- if (IS_ENABLED(CONFIG_SPI_FLASH_SOFT_RESET)) {
- err = spi_nor_remove(flash);
- if (err)
- return err;
- }
- }
-
+ load.priv = flash;
+ spl_set_bl_len(&load, 1);
+ load.read = spl_spi_fit_read;
+ err = spl_load(spl_image, bootdev, &load, 0, payload_offs);
+ if (IS_ENABLED(CONFIG_SPI_FLASH_SOFT_RESET))
+ err = spi_nor_remove(flash);
return err;
}
/* Use priorty 1 so that boards can override this */
diff --git a/include/spl_load.h b/include/spl_load.h
index 2a20e866cd8..1c2b296c0a2 100644
--- a/include/spl_load.h
+++ b/include/spl_load.h
@@ -103,6 +103,7 @@ static inline int _spl_load(struct spl_image_info *spl_image,
IS_ENABLED(CONFIG_SPL_NET) + \
IS_ENABLED(CONFIG_SPL_NOR_SUPPORT) + \
IS_ENABLED(CONFIG_SPL_SEMIHOSTING) + \
+ IS_ENABLED(CONFIG_SPL_SPI_LOAD) + \
0
#if SPL_LOAD_USERS > 1
diff --git a/test/image/spl_load_spi.c b/test/image/spl_load_spi.c
index 8f9b6e0139b..54a95465e23 100644
--- a/test/image/spl_load_spi.c
+++ b/test/image/spl_load_spi.c
@@ -34,6 +34,7 @@ static int spl_test_spi(struct unit_test_state *uts, const char *test_name,
spl_test_spi_write_image);
}
SPL_IMG_TEST(spl_test_spi, LEGACY, DM_FLAGS);
+SPL_IMG_TEST(spl_test_spi, LEGACY_LZMA, DM_FLAGS);
SPL_IMG_TEST(spl_test_spi, IMX8, DM_FLAGS);
SPL_IMG_TEST(spl_test_spi, FIT_INTERNAL, DM_FLAGS);
#if !IS_ENABLED(CONFIG_SPL_LOAD_FIT_FULL)
--
2.37.1
next prev parent reply other threads:[~2023-11-06 3:11 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-06 2:25 [PATCH v6 00/25] spl: Use common function for loading/parsing images Sean Anderson
2023-11-06 2:25 ` [PATCH v6 01/25] spl: blk_fs: Fix uninitialized return value when we can't get a blk_desc Sean Anderson
2023-11-08 4:23 ` Simon Glass
2023-11-06 2:25 ` [PATCH v6 02/25] arm: Disable SPL_FS_FAT when it isn't used Sean Anderson
2023-11-06 6:58 ` Michal Simek
2023-11-06 2:25 ` [PATCH v6 03/25] spl: Make SHOW_ERRORS depend on LIBCOMMON Sean Anderson
2023-11-08 4:23 ` Simon Glass
2023-11-06 2:25 ` [PATCH v6 04/25] spl: semihosting: Don't close fd before spl_load_simple_fit Sean Anderson
2023-11-08 4:23 ` Simon Glass
2023-11-06 2:25 ` [PATCH v6 05/25] spl: Remove NULL assignments in spl_load_info Sean Anderson
2023-11-08 4:23 ` Simon Glass
2023-11-08 15:30 ` Sean Anderson
2023-11-06 2:25 ` [PATCH v6 06/25] spl: Remove dev from spl_load_info Sean Anderson
2023-11-08 4:23 ` Simon Glass
2023-11-08 16:19 ` Sean Anderson
2023-11-06 2:25 ` [PATCH v6 07/25] spl: Take advantage of bl_len's power-of-twoness Sean Anderson
2023-11-08 4:23 ` Simon Glass
2023-11-06 2:25 ` [PATCH v6 08/25] spl: Refactor spl_load_info->read to use units of bytes Sean Anderson
2023-11-06 12:35 ` Xavier Drudis Ferran
2023-11-06 13:54 ` Sean Anderson
2023-11-07 8:49 ` Xavier Drudis Ferran
2023-11-08 15:59 ` Sean Anderson
2023-11-09 6:24 ` Xavier Drudis Ferran
2023-11-06 2:25 ` [PATCH v6 09/25] spl: Remove filename from spl_load_info Sean Anderson
2023-11-08 4:23 ` Simon Glass
2023-11-08 15:34 ` Sean Anderson
2023-11-06 2:25 ` [PATCH v6 10/25] spl: Only support bl_len when we have to Sean Anderson
2023-11-08 4:23 ` Simon Glass
2023-11-06 2:25 ` [PATCH v6 11/25] spl: nand: Remove spl_nand_legacy_read Sean Anderson
2023-11-08 4:23 ` Simon Glass
2023-11-06 2:25 ` [PATCH v6 12/25] spl: legacy: Split off LZMA decompression into its own function Sean Anderson
2023-11-08 4:23 ` Simon Glass
2023-11-06 2:25 ` [PATCH v6 13/25] test: spl: Support testing LEGACY_LZMA filesystem images Sean Anderson
2023-11-08 4:23 ` Simon Glass
2023-11-06 2:25 ` [PATCH v6 14/25] spl: Add generic spl_load function Sean Anderson
2023-11-08 4:23 ` Simon Glass
2023-11-06 2:25 ` [PATCH v6 15/25] spl: Convert ext to use spl_load Sean Anderson
2023-11-08 4:24 ` Simon Glass
2023-11-08 15:37 ` Sean Anderson
2023-11-06 2:25 ` [PATCH v6 16/25] spl: Convert fat to spl_load Sean Anderson
2023-11-08 4:24 ` Simon Glass
2023-11-08 15:49 ` Sean Anderson
2023-11-06 2:25 ` [PATCH v6 17/25] spl: Convert mmc " Sean Anderson
2023-11-08 4:24 ` Simon Glass
2023-11-06 2:25 ` [PATCH v6 18/25] spl: Convert nand " Sean Anderson
2023-11-08 4:24 ` Simon Glass
2023-11-06 2:25 ` [PATCH v6 19/25] spl: Convert net " Sean Anderson
2023-11-08 4:24 ` Simon Glass
2023-11-06 2:25 ` [PATCH v6 20/25] spl: Convert nor " Sean Anderson
2023-11-08 4:24 ` Simon Glass
2023-11-06 2:25 ` [PATCH v6 21/25] spl: Convert NVMe " Sean Anderson
2023-11-08 4:24 ` Simon Glass
2023-11-06 2:26 ` [PATCH v6 22/25] spl: Convert semihosting " Sean Anderson
2023-11-06 2:26 ` Sean Anderson [this message]
2023-11-08 4:24 ` [PATCH v6 23/25] spl: Convert spi " Simon Glass
2023-11-06 2:26 ` [PATCH v6 24/25] spl: spi: Consolidate spi_load_image_os into spl_spi_load_image Sean Anderson
2023-11-08 4:24 ` Simon Glass
2023-11-06 2:26 ` [PATCH v6 25/25] spl: fat: Add option to disable DMA alignment Sean Anderson
2023-11-08 4:24 ` Simon Glass
2023-11-06 7:49 ` [PATCH v6 00/25] spl: Use common function for loading/parsing images Pali Rohár
2023-11-06 9:18 ` Heinrich Schuchardt
2023-11-06 10:12 ` Marek Behún
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231106022603.3405551-24-seanga2@gmail.com \
--to=seanga2@gmail.com \
--cc=jagan@amarulasolutions.com \
--cc=marek.behun@nic.cz \
--cc=marex@denx.de \
--cc=pali@kernel.org \
--cc=sjg@chromium.org \
--cc=sr@denx.de \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=vigneshr@ti.com \
--cc=xdrudis@tinet.cat \
--cc=xypron.glpk@gmx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox