From: Sean Anderson <seanga2@gmail.com>
To: Tom Rini <trini@konsulko.com>, u-boot@lists.denx.de
Cc: "Simon Glass" <sjg@chromium.org>,
"Heinrich Schuchardt" <xypron.glpk@gmx.de>,
"Marek Behún" <marek.behun@nic.cz>, "Marek Vasut" <marex@denx.de>,
"Xavier Drudis Ferran" <xdrudis@tinet.cat>,
"Stefan Roese" <sr@denx.de>, "Pali Rohár" <pali@kernel.org>,
"Sean Anderson" <seanga2@gmail.com>,
"Jagan Teki" <jagan@amarulasolutions.com>,
"Nathan Barrett-Morrison" <nathan.morrison@timesys.com>,
"Vignesh R" <vigneshr@ti.com>
Subject: [PATCH v6 24/25] spl: spi: Consolidate spi_load_image_os into spl_spi_load_image
Date: Sun, 5 Nov 2023 21:26:02 -0500 [thread overview]
Message-ID: <20231106022603.3405551-25-seanga2@gmail.com> (raw)
In-Reply-To: <20231106022603.3405551-1-seanga2@gmail.com>
spi_load_image_os performs almost the same steps as the non-falcon-boot
path of spl_spi_load_image. The load address is different, and it also
loads a device tree, but that's it. Refactor the boot process so that
they can both use the same load function.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
---
(no changes since v5)
Changes in v5:
- Rework to load header in spl_load
Changes in v2:
- New
common/spl/spl_spi.c | 54 ++++++++++++--------------------------------
1 file changed, 14 insertions(+), 40 deletions(-)
diff --git a/common/spl/spl_spi.c b/common/spl/spl_spi.c
index f49e534b749..89de73c726c 100644
--- a/common/spl/spl_spi.c
+++ b/common/spl/spl_spi.c
@@ -21,41 +21,6 @@
#include <asm/io.h>
#include <dm/ofnode.h>
-#if CONFIG_IS_ENABLED(OS_BOOT)
-/*
- * Load the kernel, check for a valid header we can parse, and if found load
- * the kernel and then device tree.
- */
-static int spi_load_image_os(struct spl_image_info *spl_image,
- struct spl_boot_device *bootdev,
- struct spi_flash *flash,
- struct legacy_img_hdr *header)
-{
- int err;
-
- /* Read for a header, parse or error out. */
- spi_flash_read(flash, CFG_SYS_SPI_KERNEL_OFFS, sizeof(*header),
- (void *)header);
-
- if (image_get_magic(header) != IH_MAGIC)
- return -1;
-
- err = spl_parse_image_header(spl_image, bootdev, header);
- if (err)
- return err;
-
- spi_flash_read(flash, CFG_SYS_SPI_KERNEL_OFFS,
- spl_image->size, (void *)spl_image->load_addr);
-
- /* Read device tree. */
- spi_flash_read(flash, CFG_SYS_SPI_ARGS_OFFS,
- CFG_SYS_SPI_ARGS_SIZE,
- (void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR);
-
- return 0;
-}
-#endif
-
static ulong spl_spi_fit_read(struct spl_load_info *load, ulong sector,
ulong count, void *buf)
{
@@ -112,9 +77,21 @@ static int spl_spi_load_image(struct spl_image_info *spl_image,
return -ENODEV;
}
+ load.priv = flash;
+ spl_set_bl_len(&load, 1);
+ load.read = spl_spi_fit_read;
+
#if CONFIG_IS_ENABLED(OS_BOOT)
- if (!spl_start_uboot() && !spi_load_image_os(spl_image, bootdev, flash, header))
- return 0;
+ if (spl_start_uboot()) {
+ int err = spl_load(spl_image, bootdev, &load, 0,
+ CFG_SYS_SPI_KERNEL_OFFS);
+
+ if (!err)
+ /* Read device tree. */
+ return spi_flash_read(flash, CFG_SYS_SPI_ARGS_OFFS,
+ CFG_SYS_SPI_ARGS_SIZE,
+ (void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR);
+ }
#endif
payload_offs = spl_spi_get_uboot_offs(flash);
@@ -123,9 +100,6 @@ static int spl_spi_load_image(struct spl_image_info *spl_image,
payload_offs);
}
- load.priv = flash;
- spl_set_bl_len(&load, 1);
- load.read = spl_spi_fit_read;
err = spl_load(spl_image, bootdev, &load, 0, payload_offs);
if (IS_ENABLED(CONFIG_SPI_FLASH_SOFT_RESET))
err = spi_nor_remove(flash);
--
2.37.1
next prev parent reply other threads:[~2023-11-06 3:11 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-06 2:25 [PATCH v6 00/25] spl: Use common function for loading/parsing images Sean Anderson
2023-11-06 2:25 ` [PATCH v6 01/25] spl: blk_fs: Fix uninitialized return value when we can't get a blk_desc Sean Anderson
2023-11-08 4:23 ` Simon Glass
2023-11-06 2:25 ` [PATCH v6 02/25] arm: Disable SPL_FS_FAT when it isn't used Sean Anderson
2023-11-06 6:58 ` Michal Simek
2023-11-06 2:25 ` [PATCH v6 03/25] spl: Make SHOW_ERRORS depend on LIBCOMMON Sean Anderson
2023-11-08 4:23 ` Simon Glass
2023-11-06 2:25 ` [PATCH v6 04/25] spl: semihosting: Don't close fd before spl_load_simple_fit Sean Anderson
2023-11-08 4:23 ` Simon Glass
2023-11-06 2:25 ` [PATCH v6 05/25] spl: Remove NULL assignments in spl_load_info Sean Anderson
2023-11-08 4:23 ` Simon Glass
2023-11-08 15:30 ` Sean Anderson
2023-11-06 2:25 ` [PATCH v6 06/25] spl: Remove dev from spl_load_info Sean Anderson
2023-11-08 4:23 ` Simon Glass
2023-11-08 16:19 ` Sean Anderson
2023-11-06 2:25 ` [PATCH v6 07/25] spl: Take advantage of bl_len's power-of-twoness Sean Anderson
2023-11-08 4:23 ` Simon Glass
2023-11-06 2:25 ` [PATCH v6 08/25] spl: Refactor spl_load_info->read to use units of bytes Sean Anderson
2023-11-06 12:35 ` Xavier Drudis Ferran
2023-11-06 13:54 ` Sean Anderson
2023-11-07 8:49 ` Xavier Drudis Ferran
2023-11-08 15:59 ` Sean Anderson
2023-11-09 6:24 ` Xavier Drudis Ferran
2023-11-06 2:25 ` [PATCH v6 09/25] spl: Remove filename from spl_load_info Sean Anderson
2023-11-08 4:23 ` Simon Glass
2023-11-08 15:34 ` Sean Anderson
2023-11-06 2:25 ` [PATCH v6 10/25] spl: Only support bl_len when we have to Sean Anderson
2023-11-08 4:23 ` Simon Glass
2023-11-06 2:25 ` [PATCH v6 11/25] spl: nand: Remove spl_nand_legacy_read Sean Anderson
2023-11-08 4:23 ` Simon Glass
2023-11-06 2:25 ` [PATCH v6 12/25] spl: legacy: Split off LZMA decompression into its own function Sean Anderson
2023-11-08 4:23 ` Simon Glass
2023-11-06 2:25 ` [PATCH v6 13/25] test: spl: Support testing LEGACY_LZMA filesystem images Sean Anderson
2023-11-08 4:23 ` Simon Glass
2023-11-06 2:25 ` [PATCH v6 14/25] spl: Add generic spl_load function Sean Anderson
2023-11-08 4:23 ` Simon Glass
2023-11-06 2:25 ` [PATCH v6 15/25] spl: Convert ext to use spl_load Sean Anderson
2023-11-08 4:24 ` Simon Glass
2023-11-08 15:37 ` Sean Anderson
2023-11-06 2:25 ` [PATCH v6 16/25] spl: Convert fat to spl_load Sean Anderson
2023-11-08 4:24 ` Simon Glass
2023-11-08 15:49 ` Sean Anderson
2023-11-06 2:25 ` [PATCH v6 17/25] spl: Convert mmc " Sean Anderson
2023-11-08 4:24 ` Simon Glass
2023-11-06 2:25 ` [PATCH v6 18/25] spl: Convert nand " Sean Anderson
2023-11-08 4:24 ` Simon Glass
2023-11-06 2:25 ` [PATCH v6 19/25] spl: Convert net " Sean Anderson
2023-11-08 4:24 ` Simon Glass
2023-11-06 2:25 ` [PATCH v6 20/25] spl: Convert nor " Sean Anderson
2023-11-08 4:24 ` Simon Glass
2023-11-06 2:25 ` [PATCH v6 21/25] spl: Convert NVMe " Sean Anderson
2023-11-08 4:24 ` Simon Glass
2023-11-06 2:26 ` [PATCH v6 22/25] spl: Convert semihosting " Sean Anderson
2023-11-06 2:26 ` [PATCH v6 23/25] spl: Convert spi " Sean Anderson
2023-11-08 4:24 ` Simon Glass
2023-11-06 2:26 ` Sean Anderson [this message]
2023-11-08 4:24 ` [PATCH v6 24/25] spl: spi: Consolidate spi_load_image_os into spl_spi_load_image Simon Glass
2023-11-06 2:26 ` [PATCH v6 25/25] spl: fat: Add option to disable DMA alignment Sean Anderson
2023-11-08 4:24 ` Simon Glass
2023-11-06 7:49 ` [PATCH v6 00/25] spl: Use common function for loading/parsing images Pali Rohár
2023-11-06 9:18 ` Heinrich Schuchardt
2023-11-06 10:12 ` Marek Behún
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231106022603.3405551-25-seanga2@gmail.com \
--to=seanga2@gmail.com \
--cc=jagan@amarulasolutions.com \
--cc=marek.behun@nic.cz \
--cc=marex@denx.de \
--cc=nathan.morrison@timesys.com \
--cc=pali@kernel.org \
--cc=sjg@chromium.org \
--cc=sr@denx.de \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=vigneshr@ti.com \
--cc=xdrudis@tinet.cat \
--cc=xypron.glpk@gmx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox