[PATCH 2/2] warp7: Convert to watchdog driver model

Fabio Estevam
2023-11-06T16:35:21Z

From: Fabio Estevam <festevam@denx.de>

Commit 68dcbdd594d4 ("ARM: imx: Add weak default reset_cpu()") caused
the 'reset' command in U-Boot to not cause a board reset.

Fix it by switching to the watchdog driver model via sysreset, which
is the preferred method for implementing the watchdog reset.

Signed-off-by: Fabio Estevam <festevam@denx.de>
---
arch/arm/dts/imx7s-warp-u-boot.dtsi | 10 ++++++++++
configs/warp7_defconfig | 3 +++
2 files changed, 13 insertions(+)

diff --git a/arch/arm/dts/imx7s-warp-u-boot.dtsi b/arch/arm/dts/imx7s-warp-u-boot.dtsi
index 4f44598c9a27..98784fd7a2ef 100644
--- a/arch/arm/dts/imx7s-warp-u-boot.dtsi
+++ b/arch/arm/dts/imx7s-warp-u-boot.dtsi
@@ -7,6 +7,12 @@
chosen {
stdout-path = &uart1;
};
+
+ wdt-reboot {
+ compatible = "wdt-reboot";
+ wdt = <&wdog1>;
+ bootph-pre-ram;
+ };
};

&aips3 {
@@ -24,3 +30,7 @@
&uart1 {
bootph-all;
};
+
+&wdog1 {
+ bootph-pre-ram;
+};
diff --git a/configs/warp7_defconfig b/configs/warp7_defconfig
index 26d992d3c2d8..4ceb0a4f2917 100644
--- a/configs/warp7_defconfig
+++ b/configs/warp7_defconfig
@@ -67,6 +67,8 @@ CONFIG_DM_REGULATOR_GPIO=y
CONFIG_SPECIFY_CONSOLE_INDEX=y
CONFIG_DM_SERIAL=y
CONFIG_MXC_UART=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_WATCHDOG=y
CONFIG_IMX_THERMAL=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
@@ -80,5 +82,6 @@ CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_USB_ETHER=y
CONFIG_USB_ETH_CDC=y
CONFIG_USBNET_HOST_ADDR="de:ad:be:af:00:00"
+CONFIG_IMX_WATCHDOG=y
CONFIG_OPTEE_TZDRAM_SIZE=0x3000000
CONFIG_BOOTM_OPTEE=y
--
2.34.1