From: Nishanth Menon <nm@ti.com>
To: Sjoerd Simons <sjoerd@collabora.com>
Cc: <u-boot@lists.denx.de>, Martyn Welch <martyn.welch@collabora.com>,
"Roger Quadros" <rogerq@kernel.org>, Andrew Davis <afd@ti.com>,
Dave Gerlach <d-gerlach@ti.com>,
Kamlesh Gurudasani <kamlesh@ti.com>,
Manorit Chawdhry <m-chawdhry@ti.com>,
Mattijs Korpershoek <mkorpershoek@baylibre.com>,
"Nikhil M Jain" <n-jain1@ti.com>,
Praneeth Bajjuri <praneeth@ti.com>
Subject: Re: [PATCH v4 5/7] configs: am62x_evm_*: Enable USB and DFU support
Date: Fri, 12 Jan 2024 06:37:38 -0600 [thread overview]
Message-ID: <20240112123738.v76kpf6bfngtc2kr@zigzagged> (raw)
In-Reply-To: <20240112085317.1866449-6-sjoerd@collabora.com>
On 09:52-20240112, Sjoerd Simons wrote:
> Enable USB host as well as USB gadget and DFU support for a53; For the
> r5 due to the smaller available size create a config fragment for DFU
> supports which disables support for persistent storage to free up space
> for USB support
>
> Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
>
> ---
>
> Changes in v4:
> - Move R5 dfu config to a config fragment rather then a full defconfig
> - Don't enable XHCI for the R5 SPL, unneeded
>
> Changes in v3:
> - Run savedefconfig to adjust to more recent u-boot
>
> Changes in v2:
> - Create a seperate defconfig for R5
>
> configs/am62x_evm_a53_defconfig | 30 ++++++++++++++++++++++++++++++
> configs/am62x_r5_usbdfu.config | 28 ++++++++++++++++++++++++++++
> 2 files changed, 58 insertions(+)
> create mode 100644 configs/am62x_r5_usbdfu.config
>
> diff --git a/configs/am62x_evm_a53_defconfig b/configs/am62x_evm_a53_defconfig
> index aa96c1b3125..f335eb11e63 100644
> --- a/configs/am62x_evm_a53_defconfig
> +++ b/configs/am62x_evm_a53_defconfig
Should we make the a53 also a defconfig fragment allowing reuse across
multiple boards?
> @@ -1,5 +1,6 @@
> CONFIG_ARM=y
> CONFIG_ARCH_K3=y
> +CONFIG_SYS_MALLOC_LEN=0x2000000
> CONFIG_SYS_MALLOC_F_LEN=0x8000
> CONFIG_SPL_LIBCOMMON_SUPPORT=y
> CONFIG_SPL_LIBGENERIC_SUPPORT=y
> @@ -41,16 +42,23 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y
> CONFIG_SPL_STACK_R=y
> CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
> CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
> +CONFIG_SPL_ENV_SUPPORT=y
> CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
> CONFIG_SPL_DM_MAILBOX=y
> CONFIG_SPL_DM_SPI_FLASH=y
> CONFIG_SPL_POWER_DOMAIN=y
> +CONFIG_SPL_RAM_SUPPORT=y
> +CONFIG_SPL_RAM_DEVICE=y
> # CONFIG_SPL_SPI_FLASH_TINY is not set
> CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
> CONFIG_SPL_SPI_LOAD=y
> CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000
> +CONFIG_SPL_USB_GADGET=y
> +CONFIG_SPL_DFU=y
> CONFIG_SPL_YMODEM_SUPPORT=y
> +CONFIG_CMD_DFU=y
> CONFIG_CMD_MMC=y
> +CONFIG_CMD_USB=y
> CONFIG_OF_CONTROL=y
> CONFIG_SPL_OF_CONTROL=y
> CONFIG_MULTI_DTB_FIT=y
> @@ -61,10 +69,17 @@ CONFIG_SPL_DM=y
> CONFIG_SPL_DM_SEQ_ALIAS=y
> CONFIG_REGMAP=y
> CONFIG_SPL_REGMAP=y
> +CONFIG_SYSCON=y
> +CONFIG_SPL_SYSCON=y
> CONFIG_SPL_OF_TRANSLATE=y
> CONFIG_CLK=y
> CONFIG_SPL_CLK=y
> CONFIG_CLK_TI_SCI=y
> +CONFIG_DFU_MMC=y
> +CONFIG_DFU_RAM=y
> +CONFIG_DFU_SF=y
> +CONFIG_SYS_DFU_DATA_BUF_SIZE=0x5000
> +CONFIG_SYS_DFU_MAX_FILE_SIZE=0x800000
> CONFIG_DMA_CHANNELS=y
> CONFIG_TI_K3_NAVSS_UDMA=y
> CONFIG_TI_SCI_PROTOCOL=y
> @@ -103,4 +118,19 @@ CONFIG_CADENCE_QSPI=y
> CONFIG_SYSRESET=y
> CONFIG_SPL_SYSRESET=y
> CONFIG_SYSRESET_TI_SCI=y
> +CONFIG_USB=y
> +CONFIG_DM_USB_GADGET=y
> +CONFIG_SPL_DM_USB_GADGET=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_USB_DWC3=y
> +CONFIG_USB_DWC3_GENERIC=y
> +CONFIG_SPL_USB_DWC3_GENERIC=y
> +CONFIG_SPL_USB_DWC3_AM62=y
> +CONFIG_USB_DWC3_AM62=y
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
> +CONFIG_USB_GADGET_VENDOR_NUM=0x0451
> +CONFIG_USB_GADGET_PRODUCT_NUM=0x6165
> +CONFIG_USB_GADGET_DOWNLOAD=y
> CONFIG_FS_FAT_MAX_CLUSTSIZE=16384
> diff --git a/configs/am62x_r5_usbdfu.config b/configs/am62x_r5_usbdfu.config
> new file mode 100644
> index 00000000000..772bb2ab935
> --- /dev/null
> +++ b/configs/am62x_r5_usbdfu.config
> @@ -0,0 +1,28 @@
> +CONFIG_SPL_ENV_SUPPORT=y
> +CONFIG_SYSCON=y
> +CONFIG_SPL_SYSCON=y
> +CONFIG_SYS_DFU_DATA_BUF_SIZE=0x5000
> +CONFIG_MISC=y
> +CONFIG_USB=y
> +CONFIG_DM_USB_GADGET=y
> +CONFIG_SPL_DM_USB_GADGET=y
> +CONFIG_USB_DWC3=y
> +CONFIG_USB_DWC3_GENERIC=y
> +CONFIG_SPL_USB_DWC3_GENERIC=y
> +CONFIG_SPL_USB_DWC3_AM62=y
> +CONFIG_USB_GADGET=y
> +CONFIG_SPL_USB_GADGET=y
> +CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
> +CONFIG_USB_GADGET_VENDOR_NUM=0x0451
> +CONFIG_USB_GADGET_PRODUCT_NUM=0x6165
> +CONFIG_USB_GADGET_DOWNLOAD=y
> +CONFIG_SPL_DFU=y
> +# CONFIG_SPL_MMC is not set
> +# CONFIG_SPL_FS_FAT is not set
> +# CONFIG_SPL_LIBDISK_SUPPORT is not set
> +# CONFIG_SPL_SPI is not set
> +# CONFIG_SPL_SYS_MALLOC is not set
> +# CONFIG_CMD_GPT is not set
> +# CONFIG_CMD_MMC is not set
> +# CONFIG_CMD_FAT is not set
> +# CONFIG_MMC_SDHCI is not set
> --
> 2.43.0
>
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
next prev parent reply other threads:[~2024-01-12 12:37 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-12 8:52 [PATCH v4 0/7] Add DFU and usb boot for TI am62x SK and beagleplay Sjoerd Simons
2024-01-12 8:52 ` [PATCH v4 1/7] usb: dwc3: Add dwc3 glue driver for am62 Sjoerd Simons
2024-01-16 10:22 ` Mattijs Korpershoek
2024-05-01 13:56 ` Martyn Welch
2024-05-02 7:03 ` Mattijs Korpershoek
2024-04-12 20:34 ` Sverdlin, Alexander
2024-01-12 8:52 ` [PATCH v4 2/7] usb: dwc3: Switch to device mode on gadget start Sjoerd Simons
2024-01-12 10:39 ` Roger Quadros
2024-01-12 11:06 ` Sjoerd Simons
2024-01-12 12:56 ` Roger Quadros
2024-01-12 14:18 ` Sjoerd Simons
2024-01-15 13:40 ` Roger Quadros
2024-01-12 12:55 ` Caleb Connolly
2024-01-16 10:55 ` Mattijs Korpershoek
2024-01-16 10:46 ` Mattijs Korpershoek
2024-04-12 20:33 ` Sverdlin, Alexander
2024-01-12 8:52 ` [PATCH v4 3/7] board: ti: am62x: am62x: include env for DFU Sjoerd Simons
2024-01-16 10:57 ` Mattijs Korpershoek
2024-04-12 20:31 ` Sverdlin, Alexander
2024-01-12 8:52 ` [PATCH v4 4/7] arm: dts: k3-am625-sk: Enable usb port in u-boot Sjoerd Simons
2024-01-16 11:17 ` Mattijs Korpershoek
2024-01-16 11:21 ` Sjoerd Simons
2024-04-12 20:30 ` Sverdlin, Alexander
2024-01-12 8:52 ` [PATCH v4 5/7] configs: am62x_evm_*: Enable USB and DFU support Sjoerd Simons
2024-01-12 9:58 ` Roger Quadros
2024-01-12 10:44 ` Sjoerd Simons
2024-01-12 10:55 ` Roger Quadros
2024-01-12 12:37 ` Nishanth Menon [this message]
2024-01-12 13:09 ` Sjoerd Simons
2024-01-12 13:19 ` Nishanth Menon
2024-01-12 15:06 ` Sjoerd Simons
2024-01-12 15:40 ` Nishanth Menon
2024-01-12 15:58 ` Sjoerd Simons
2024-01-12 16:03 ` Tom Rini
2024-02-08 10:33 ` Mattijs Korpershoek
2024-01-12 8:52 ` [PATCH v4 6/7] beagleplay: Add " Sjoerd Simons
2024-01-12 10:41 ` Roger Quadros
2024-01-12 10:47 ` Sjoerd Simons
2024-01-12 12:34 ` Nishanth Menon
2024-01-12 8:52 ` [PATCH v4 7/7] doc: board: Add document for DFU boot on am62x SoCs Sjoerd Simons
2024-01-12 12:36 ` Nishanth Menon
2024-01-12 12:58 ` Sjoerd Simons
2024-01-12 13:18 ` Mattijs Korpershoek
2024-01-16 11:12 ` Mattijs Korpershoek
2024-01-16 10:09 ` [PATCH v4 0/7] Add DFU and usb boot for TI am62x SK and beagleplay Mattijs Korpershoek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240112123738.v76kpf6bfngtc2kr@zigzagged \
--to=nm@ti.com \
--cc=afd@ti.com \
--cc=d-gerlach@ti.com \
--cc=kamlesh@ti.com \
--cc=m-chawdhry@ti.com \
--cc=martyn.welch@collabora.com \
--cc=mkorpershoek@baylibre.com \
--cc=n-jain1@ti.com \
--cc=praneeth@ti.com \
--cc=rogerq@kernel.org \
--cc=sjoerd@collabora.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox