[PATCH v3 09/17] clk: rockchip: rk3328: Add VOP clk support

[Jagan Teki <jagan@amarulasolutions.com>]

From: Jagan Teki <jagan@edgeble.ai>

VOP get and set clock would needed for VOP drivers.

Add support for it.

Signed-off-by: Jagan Teki <jagan@edgeble.ai>
---
Changes for v3:
- none
Changes for v2:
- Add DCLK get rate

 .../include/asm/arch-rockchip/cru_rk3328.h    | 34 +++++++
 drivers/clk/rockchip/clk_rk3328.c             | 88 ++++++++++++++++++-
 2 files changed, 120 insertions(+), 2 deletions(-)

diff --git a/arch/arm/include/asm/arch-rockchip/cru_rk3328.h b/arch/arm/include/asm/arch-rockchip/cru_rk3328.h
index 226744d67d..4ad1d33e05 100644
--- a/arch/arm/include/asm/arch-rockchip/cru_rk3328.h
+++ b/arch/arm/include/asm/arch-rockchip/cru_rk3328.h
@@ -62,6 +62,40 @@ check_member(rk3328_cru, sdmmc_ext_con[1], 0x39c);
 enum apll_frequencies {
 	APLL_816_MHZ,
 	APLL_600_MHZ,
+
+	/* CRU_CLK_SEL37_CON */
+	ACLK_VIO_PLL_SEL_CPLL		= 0,
+	ACLK_VIO_PLL_SEL_GPLL		= 1,
+	ACLK_VIO_PLL_SEL_HDMIPHY	= 2,
+	ACLK_VIO_PLL_SEL_USB480M	= 3,
+	ACLK_VIO_PLL_SEL_SHIFT		= 6,
+	ACLK_VIO_PLL_SEL_MASK		= 3 << ACLK_VIO_PLL_SEL_SHIFT,
+	ACLK_VIO_DIV_CON_SHIFT		= 0,
+	ACLK_VIO_DIV_CON_MASK		= 0x1f << ACLK_VIO_DIV_CON_SHIFT,
+	HCLK_VIO_DIV_CON_SHIFT		= 8,
+	HCLK_VIO_DIV_CON_MASK		= 0x1f << HCLK_VIO_DIV_CON_SHIFT,
+
+	/* CRU_CLK_SEL39_CON */
+	ACLK_VOP_PLL_SEL_CPLL		= 0,
+	ACLK_VOP_PLL_SEL_GPLL		= 1,
+	ACLK_VOP_PLL_SEL_HDMIPHY	= 2,
+	ACLK_VOP_PLL_SEL_USB480M	= 3,
+	ACLK_VOP_PLL_SEL_SHIFT		= 6,
+	ACLK_VOP_PLL_SEL_MASK		= 3 << ACLK_VOP_PLL_SEL_SHIFT,
+	ACLK_VOP_DIV_CON_SHIFT		= 0,
+	ACLK_VOP_DIV_CON_MASK		= 0x1f << ACLK_VOP_DIV_CON_SHIFT,
+
+	/* CRU_CLK_SEL40_CON */
+	DCLK_LCDC_PLL_SEL_GPLL		= 0,
+	DCLK_LCDC_PLL_SEL_CPLL		= 1,
+	DCLK_LCDC_PLL_SEL_SHIFT		= 0,
+	DCLK_LCDC_PLL_SEL_MASK		= 1 << DCLK_LCDC_PLL_SEL_SHIFT,
+	DCLK_LCDC_SEL_HDMIPHY		= 0,
+	DCLK_LCDC_SEL_PLL		= 1,
+	DCLK_LCDC_SEL_SHIFT		= 1,
+	DCLK_LCDC_SEL_MASK		= 1 << DCLK_LCDC_SEL_SHIFT,
+	DCLK_LCDC_DIV_CON_SHIFT		= 8,
+	DCLK_LCDC_DIV_CON_MASK		= 0xFf << DCLK_LCDC_DIV_CON_SHIFT,
 };
 
 void rk3328_configure_cpu(struct rk3328_cru *cru,
diff --git a/drivers/clk/rockchip/clk_rk3328.c b/drivers/clk/rockchip/clk_rk3328.c
index ef97381f0e..ee7edb9d10 100644
--- a/drivers/clk/rockchip/clk_rk3328.c
+++ b/drivers/clk/rockchip/clk_rk3328.c
@@ -581,6 +581,86 @@ static ulong rk3328_spi_set_clk(struct rk3328_cru *cru, uint hz)
 	return rk3328_spi_get_clk(cru);
 }
 
+#ifndef CONFIG_SPL_BUILD
+static ulong rk3328_vop_get_clk(struct rk3328_clk_priv *priv, ulong clk_id)
+{
+	struct rk3328_cru *cru = priv->cru;
+	u32 div, con, parent;
+
+	switch (clk_id) {
+	case ACLK_VOP_PRE:
+		con = readl(&cru->clksel_con[39]);
+		div = (con & ACLK_VOP_DIV_CON_MASK) >> ACLK_VOP_DIV_CON_SHIFT;
+		parent = GPLL_HZ;
+		break;
+	case ACLK_VIO_PRE:
+		con = readl(&cru->clksel_con[37]);
+		div = (con & ACLK_VIO_DIV_CON_MASK) >> ACLK_VIO_DIV_CON_SHIFT;
+		parent = GPLL_HZ;
+		break;
+	case DCLK_LCDC:
+		con = readl(&cru->clksel_con[40]);
+		div = (con & DCLK_LCDC_DIV_CON_MASK) >> DCLK_LCDC_DIV_CON_SHIFT;
+		parent = GPLL_HZ;
+		break;
+	default:
+		printf("%s: Unsupported vop get clk#%ld\n", __func__, clk_id);
+		return -ENOENT;
+	}
+
+	return DIV_TO_RATE(parent, div);
+}
+
+static ulong rk3328_vop_set_clk(struct rk3328_clk_priv *priv,
+				ulong clk_id, uint hz)
+{
+	struct rk3328_cru *cru = priv->cru;
+	int src_clk_div;
+	u32 con, parent;
+
+	src_clk_div = DIV_ROUND_UP(GPLL_HZ, hz);
+	assert(src_clk_div - 1 < 31);
+
+	switch (clk_id) {
+	case ACLK_VOP_PRE:
+		rk_clrsetreg(&cru->clksel_con[39],
+			     ACLK_VOP_PLL_SEL_MASK | ACLK_VOP_DIV_CON_MASK,
+			     ACLK_VOP_PLL_SEL_CPLL << ACLK_VOP_PLL_SEL_SHIFT |
+			     (src_clk_div - 1) << ACLK_VOP_DIV_CON_SHIFT);
+		break;
+	case ACLK_VIO_PRE:
+		rk_clrsetreg(&cru->clksel_con[37],
+			     ACLK_VIO_PLL_SEL_MASK | ACLK_VIO_DIV_CON_MASK,
+			     ACLK_VIO_PLL_SEL_CPLL << ACLK_VIO_PLL_SEL_SHIFT |
+			     (src_clk_div - 1) << ACLK_VIO_DIV_CON_SHIFT);
+		break;
+	case DCLK_LCDC:
+		con = readl(&cru->clksel_con[40]);
+		con = (con & DCLK_LCDC_SEL_MASK) >> DCLK_LCDC_SEL_SHIFT;
+		if (con) {
+			parent = readl(&cru->clksel_con[40]);
+			parent = (parent & DCLK_LCDC_PLL_SEL_MASK) >>
+				 DCLK_LCDC_PLL_SEL_SHIFT;
+			if (parent)
+				src_clk_div = DIV_ROUND_UP(GPLL_HZ, hz);
+			else
+				src_clk_div = DIV_ROUND_UP(GPLL_HZ, hz);
+
+			rk_clrsetreg(&cru->clksel_con[40],
+				     DCLK_LCDC_DIV_CON_MASK,
+				     (src_clk_div - 1) <<
+				     DCLK_LCDC_DIV_CON_SHIFT);
+		}
+		break;
+	default:
+		printf("%s: Unable to set vop clk#%ld\n", __func__, clk_id);
+		return -EINVAL;
+	}
+
+	return rk3328_vop_get_clk(priv, clk_id);
+}
+#endif
+
 static ulong rk3328_clk_get_rate(struct clk *clk)
 {
 	struct rk3328_clk_priv *priv = dev_get_priv(clk->dev);
@@ -649,7 +729,13 @@ static ulong rk3328_clk_set_rate(struct clk *clk, ulong rate)
 	case SCLK_SPI:
 		ret = rk3328_spi_set_clk(priv->cru, rate);
 		break;
+#ifndef CONFIG_SPL_BUILD
 	case DCLK_LCDC:
+	case ACLK_VOP_PRE:
+	case ACLK_VIO_PRE:
+		rate = rk3328_vop_set_clk(priv, clk->id, rate);
+		break;
+#endif
 	case SCLK_PDM:
 	case SCLK_RTC32K:
 	case SCLK_UART0:
@@ -664,11 +750,9 @@ static ulong rk3328_clk_set_rate(struct clk *clk, ulong rate)
 	case ACLK_PERI_PRE:
 	case HCLK_PERI:
 	case PCLK_PERI:
-	case ACLK_VIO_PRE:
 	case HCLK_VIO_PRE:
 	case ACLK_RGA_PRE:
 	case SCLK_RGA:
-	case ACLK_VOP_PRE:
 	case ACLK_RKVDEC_PRE:
 	case ACLK_RKVENC:
 	case ACLK_VPU_PRE:
-- 
2.25.1