public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Jagan Teki <jagan@amarulasolutions.com>
To: Anatolij Gustschin <agust@denx.de>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	Andre Przywara <andre.przywara@arm.com>,
	Kever Yang <kever.yang@rock-chips.com>,
	Simon Glass <sjg@chromium.org>, Heiko Stuebner <heiko@sntech.de>,
	Andy Yan <andyshrk@163.com>, Robin Murphy <robin.murphy@arm.com>
Cc: Da Xue <da.xue@libretech.co>,
	u-boot@lists.denx.de, Jagan Teki <jagan@edgeble.ai>
Subject: [PATCH v3 02/17] video: dw_hdmi: Add Vendor PHY handling
Date: Wed, 17 Jan 2024 13:21:39 +0530	[thread overview]
Message-ID: <20240117075154.58747-3-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20240117075154.58747-1-jagan@amarulasolutions.com>

From: Jagan Teki <jagan@edgeble.ai>

DW HDMI support Vendor PHY like Rockchip RK3328 Inno HDMI PHY.

Extend the vendor phy handling by adding platform phy hooks.

Signed-off-by: Jagan Teki <jagan@edgeble.ai>
---
Changes for v3:
- drop data
- assign ops directly
Changes for v2:
- fix meson cfg

 drivers/video/dw_hdmi.c             | 10 +++++++++-
 drivers/video/meson/meson_dw_hdmi.c |  6 +++++-
 drivers/video/rockchip/rk_hdmi.c    |  1 -
 drivers/video/sunxi/sunxi_dw_hdmi.c |  6 +++++-
 include/dw_hdmi.h                   |  8 +++++++-
 5 files changed, 26 insertions(+), 5 deletions(-)

diff --git a/drivers/video/dw_hdmi.c b/drivers/video/dw_hdmi.c
index c4fbb18294..4914ba6146 100644
--- a/drivers/video/dw_hdmi.c
+++ b/drivers/video/dw_hdmi.c
@@ -988,7 +988,7 @@ int dw_hdmi_enable(struct dw_hdmi *hdmi, const struct display_timing *edid)
 
 	hdmi_av_composer(hdmi, edid);
 
-	ret = hdmi->phy_set(hdmi, edid->pixelclock.typ);
+	ret = hdmi->ops->phy_set(hdmi, edid->pixelclock.typ);
 	if (ret)
 		return ret;
 
@@ -1009,10 +1009,18 @@ int dw_hdmi_enable(struct dw_hdmi *hdmi, const struct display_timing *edid)
 	return 0;
 }
 
+static const struct dw_hdmi_phy_ops dw_hdmi_synopsys_phy_ops = {
+	.phy_set = dw_hdmi_phy_cfg,
+};
+
 void dw_hdmi_init(struct dw_hdmi *hdmi)
 {
 	uint ih_mute;
 
+	/* hook Synopsys PHYs ops */
+	if (!hdmi->ops)
+		hdmi->ops = &dw_hdmi_synopsys_phy_ops;
+
 	/*
 	 * boot up defaults are:
 	 * hdmi_ih_mute   = 0x03 (disabled)
diff --git a/drivers/video/meson/meson_dw_hdmi.c b/drivers/video/meson/meson_dw_hdmi.c
index 5db01904b5..259af1b457 100644
--- a/drivers/video/meson/meson_dw_hdmi.c
+++ b/drivers/video/meson/meson_dw_hdmi.c
@@ -375,6 +375,10 @@ static int meson_dw_hdmi_wait_hpd(struct dw_hdmi *hdmi)
 	return -ETIMEDOUT;
 }
 
+static const struct dw_hdmi_phy_ops dw_hdmi_meson_phy_ops = {
+	.phy_set = meson_dw_hdmi_phy_init,
+};
+
 static int meson_dw_hdmi_probe(struct udevice *dev)
 {
 	struct meson_dw_hdmi *priv = dev_get_priv(dev);
@@ -397,7 +401,7 @@ static int meson_dw_hdmi_probe(struct udevice *dev)
 
 	priv->hdmi.hdmi_data.enc_out_bus_format = MEDIA_BUS_FMT_RGB888_1X24;
 	priv->hdmi.hdmi_data.enc_in_bus_format = MEDIA_BUS_FMT_YUV8_1X24;
-	priv->hdmi.phy_set = meson_dw_hdmi_phy_init;
+	priv->hdmi.ops = &dw_hdmi_meson_phy_ops;
 	if (meson_hdmi_is_compatible(priv, HDMI_COMPATIBLE_G12A))
 		priv->hdmi.reg_io_width = 1;
 	else {
diff --git a/drivers/video/rockchip/rk_hdmi.c b/drivers/video/rockchip/rk_hdmi.c
index b75a174489..d5b5a529d2 100644
--- a/drivers/video/rockchip/rk_hdmi.c
+++ b/drivers/video/rockchip/rk_hdmi.c
@@ -90,7 +90,6 @@ int rk_hdmi_of_to_plat(struct udevice *dev)
 	/* hdmi->i2c_clk_{high,low} are set up by the SoC driver */
 
 	hdmi->reg_io_width = 4;
-	hdmi->phy_set = dw_hdmi_phy_cfg;
 
 	priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
 
diff --git a/drivers/video/sunxi/sunxi_dw_hdmi.c b/drivers/video/sunxi/sunxi_dw_hdmi.c
index 0324a050d0..986e69d66b 100644
--- a/drivers/video/sunxi/sunxi_dw_hdmi.c
+++ b/drivers/video/sunxi/sunxi_dw_hdmi.c
@@ -369,6 +369,10 @@ static int sunxi_dw_hdmi_probe(struct udevice *dev)
 	return 0;
 }
 
+static const struct dw_hdmi_phy_ops dw_hdmi_sunxi_phy_ops = {
+	.phy_set = sunxi_dw_hdmi_phy_cfg,
+};
+
 static int sunxi_dw_hdmi_of_to_plat(struct udevice *dev)
 {
 	struct sunxi_dw_hdmi_priv *priv = dev_get_priv(dev);
@@ -379,7 +383,7 @@ static int sunxi_dw_hdmi_of_to_plat(struct udevice *dev)
 	hdmi->i2c_clk_high = 0xd8;
 	hdmi->i2c_clk_low = 0xfe;
 	hdmi->reg_io_width = 1;
-	hdmi->phy_set = sunxi_dw_hdmi_phy_cfg;
+	hdmi->ops = &dw_hdmi_sunxi_phy_ops;
 
 	ret = reset_get_bulk(dev, &priv->resets);
 	if (ret)
diff --git a/include/dw_hdmi.h b/include/dw_hdmi.h
index 8acae3839f..17bdd2dbf9 100644
--- a/include/dw_hdmi.h
+++ b/include/dw_hdmi.h
@@ -534,6 +534,12 @@ struct hdmi_data_info {
 	struct hdmi_vmode video_mode;
 };
 
+struct dw_hdmi;
+
+struct dw_hdmi_phy_ops {
+	int (*phy_set)(struct dw_hdmi *hdmi, uint mpixelclock);
+};
+
 struct dw_hdmi {
 	ulong ioaddr;
 	const struct hdmi_mpll_config *mpll_cfg;
@@ -543,8 +549,8 @@ struct dw_hdmi {
 	u8 reg_io_width;
 	struct hdmi_data_info hdmi_data;
 	struct udevice *ddc_bus;
+	const struct dw_hdmi_phy_ops *ops;
 
-	int (*phy_set)(struct dw_hdmi *hdmi, uint mpixelclock);
 	void (*write_reg)(struct dw_hdmi *hdmi, u8 val, int offset);
 	u8 (*read_reg)(struct dw_hdmi *hdmi, int offset);
 };
-- 
2.25.1


  parent reply	other threads:[~2024-01-17  7:52 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-17  7:51 [PATCH v3 00/17] video: dw_hdmi: Support Vendor PHY Jagan Teki
2024-01-17  7:51 ` [PATCH v3 01/17] video: rockchip: hdmi: Detect hpd after controller init Jagan Teki
2024-01-17  7:51 ` Jagan Teki [this message]
2024-01-17  8:58   ` [PATCH v3 02/17] video: dw_hdmi: Add Vendor PHY handling Neil Armstrong
2024-01-17  7:51 ` [PATCH v3 03/17] video: dw_hdmi: Extend the HPD detection Jagan Teki
2024-01-17  8:59   ` Neil Armstrong
2024-01-17  7:51 ` [PATCH v3 04/17] video: dw_hdmi: Add read_hpd hook Jagan Teki
2024-01-17  8:59   ` Neil Armstrong
2024-01-17  7:51 ` [PATCH v3 05/17] video: dw_hdmi: Add setup_hpd hook Jagan Teki
2024-01-17  8:59   ` Neil Armstrong
2024-01-17  7:51 ` [PATCH v3 06/17] video: rockchip: vop: Simplify rkvop_enable Jagan Teki
2024-01-17  7:51 ` [PATCH v3 07/17] video: rockchip: vop: Add win offset support Jagan Teki
2024-01-17  7:51 ` [PATCH v3 08/17] video: rockchip: vop: Add dsp " Jagan Teki
2024-01-17  7:51 ` [PATCH v3 09/17] clk: rockchip: rk3328: Add VOP clk support Jagan Teki
2024-01-17  7:51 ` [PATCH v3 10/17] clk: rk3328: Add get hdmiphy clock Jagan Teki
2024-01-17  7:51 ` [PATCH v3 11/17] phy: rockchip: Add Rockchip INNO HDMI PHY driver Jagan Teki
2024-01-17  7:51 ` [PATCH v3 12/17] video: rockchip: Add rk3328 hdmi support Jagan Teki
2024-01-17  7:51 ` [PATCH v3 13/17] video: rockchip: Add rk3328 vop support Jagan Teki
2024-01-17  7:51 ` [PATCH v3 14/17] ARM: dts: rk3328: Enable VOP for bootph-all Jagan Teki
2024-02-19 17:21   ` Jonas Karlman
2024-02-19 18:32     ` Jagan Teki
2024-01-17  7:51 ` [PATCH v3 15/17] rockchip: Enable preconsole for rk3328 Jagan Teki
2024-01-17  7:51 ` [PATCH v3 16/17] configs: evb-rk3328: Enable vidconsole " Jagan Teki
2024-01-17  7:51 ` [PATCH v3 17/17] configs: Enable HDMI Out for ROC-RK3328-CC Jagan Teki
2024-02-19 11:49 ` [PATCH v3 00/17] video: dw_hdmi: Support Vendor PHY Jagan Teki
2024-03-14  9:25   ` Jagan Teki
2024-04-20 23:19     ` Anatolij Gustschin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240117075154.58747-3-jagan@amarulasolutions.com \
    --to=jagan@amarulasolutions.com \
    --cc=agust@denx.de \
    --cc=andre.przywara@arm.com \
    --cc=andyshrk@163.com \
    --cc=da.xue@libretech.co \
    --cc=heiko@sntech.de \
    --cc=jagan@edgeble.ai \
    --cc=kever.yang@rock-chips.com \
    --cc=neil.armstrong@linaro.org \
    --cc=robin.murphy@arm.com \
    --cc=sjg@chromium.org \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox