[PATCH 0/2] imx93_var_som: Enable AHAB support

[PATCH 0/2] imx93_var_som: Enable AHAB support

[Mathieu Othacehe]

Hello,

This enables AHAB support on the imx93_var_som.
I was able to test that I can boot from signed images on a closed board.

There is one issue that has been discovered and that is discussed here:
https://lists.denx.de/pipermail/u-boot/2024-February/545404.html

This series can still be applied in the meantime I guess.

Thanks,

Mathieu

Mathieu Othacehe (2):
  board: imx93_var_som: Probe ELE MU
  configs: imx93_var_som: Enable AHAB support

 board/variscite/imx93_var_som/spl.c | 5 +++--
 configs/imx93_var_som_defconfig     | 1 +
 2 files changed, 4 insertions(+), 2 deletions(-)

-- 
2.41.0

[PATCH 1/2] board: imx93_var_som: Probe ELE MU

[Mathieu Othacehe]

Probing the MU is needed to prevent this error in the SPL:

ele dev is not initialized
Authenticate container hdr failed, return -19, resp 0x0
IND = INVALID

ele dev is not initialized
Error: release container failed, resp 0x0!
IND = INVALID

SPL: failed to boot from all boot devices

Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
---
 board/variscite/imx93_var_som/spl.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/board/variscite/imx93_var_som/spl.c b/board/variscite/imx93_var_som/spl.c
index 502e599b91a..0965a2de996 100644
--- a/board/variscite/imx93_var_som/spl.c
+++ b/board/variscite/imx93_var_som/spl.c
@@ -97,6 +97,7 @@ int power_init_board(void)
 	return 0;
 }
 
+extern int imx9_probe_mu(void *ctx, struct event *event);
 void board_init_f(ulong dummy)
 {
 	int ret;
@@ -114,9 +115,9 @@ void board_init_f(ulong dummy)
 
 	preloader_console_init();
 
-	ret = arch_cpu_init();
+	ret = imx9_probe_mu(NULL, NULL);
 	if (ret) {
-		printf("Fail to init Sentinel API\n");
+		printf("Fail to init ELE API\n");
 	} else {
 		printf("SOC: 0x%x\n", gd->arch.soc_rev);
 		printf("LC: 0x%x\n", gd->arch.lifecycle);
-- 
2.41.0

Re: [PATCH 1/2] board: imx93_var_som: Probe ELE MU

[Fabio Estevam]

On Thu, Feb 8, 2024 at 6:45 AM Mathieu Othacehe <othacehe@gnu.org> wrote:

> diff --git a/board/variscite/imx93_var_som/spl.c b/board/variscite/imx93_var_som/spl.c
> index 502e599b91a..0965a2de996 100644
> --- a/board/variscite/imx93_var_som/spl.c
> +++ b/board/variscite/imx93_var_som/spl.c
> @@ -97,6 +97,7 @@ int power_init_board(void)
>         return 0;
>  }
>
> +extern int imx9_probe_mu(void *ctx, struct event *event);

Please put this prototype into a header file.

Currently, it appears in 3 imx93 spl.c files.

Re: [PATCH 1/2] board: imx93_var_som: Probe ELE MU

[Mathieu Othacehe]

Hello,

> Please put this prototype into a header file.
>
> Currently, it appears in 3 imx93 spl.c files.

Fixed in the v2 :)

Thanks,

Mathieu

[PATCH 2/2] configs: imx93_var_som: Enable AHAB support

[Mathieu Othacehe]

Enable AHAB support in the imx93_var_som configuration.

Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
---
 configs/imx93_var_som_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/configs/imx93_var_som_defconfig b/configs/imx93_var_som_defconfig
index cc0c5a79bc1..14922f2a3e2 100644
--- a/configs/imx93_var_som_defconfig
+++ b/configs/imx93_var_som_defconfig
@@ -12,6 +12,7 @@ CONFIG_IMX_CONFIG="arch/arm/mach-imx/imx9/imximage.cfg"
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="imx93-var-som-symphony"
 CONFIG_SPL_TEXT_BASE=0x2049A000
+CONFIG_AHAB_BOOT=y
 CONFIG_TARGET_IMX93_VAR_SOM=y
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_SPL_SERIAL=y
-- 
2.41.0

Re: [PATCH 0/2] imx93_var_som: Enable AHAB support

[Fabio Estevam]

Hi Mathieu,

On Thu, Feb 8, 2024 at 6:45 AM Mathieu Othacehe <othacehe@gnu.org> wrote:
>
> Hello,
>
> This enables AHAB support on the imx93_var_som.
> I was able to test that I can boot from signed images on a closed board.
>
> There is one issue that has been discovered and that is discussed here:
> https://lists.denx.de/pipermail/u-boot/2024-February/545404.html
>
> This series can still be applied in the meantime I guess.

Just wanted to make sure I understand: if someone programs the fuse to
close the board,
it will fail to boot U-Boot proper and this means that the board is
bricked. Is this correct?

Is the boot failure related to some malloc size needing to be increased?

Re: [PATCH 0/2] imx93_var_som: Enable AHAB support

[Mathieu Othacehe]

Hello Fabio,

> Just wanted to make sure I understand: if someone programs the fuse to
> close the board,
> it will fail to boot U-Boot proper and this means that the board is
> bricked. Is this correct?

No. I fused the board and with this series applied and the three HAFDBS
commits reverted, I can boot just fine on that board.

Without reverting those commits, the SPL is working fine and u-boot
hangs at relocation. It is 100% reproducible on my board.

> Is the boot failure related to some malloc size needing to be increased?

I tried that it has no influence.

Thanks,

Mathieu

Re: [PATCH 0/2] imx93_var_som: Enable AHAB support

[Fabio Estevam]

Hi Mathieu,

On Fri, Feb 9, 2024 at 5:05 AM Mathieu Othacehe <othacehe@gnu.org> wrote:

> No. I fused the board and with this series applied and the three HAFDBS
> commits reverted, I can boot just fine on that board.

Yes, this part I understood.

> Without reverting those commits, the SPL is working fine and u-boot
> hangs at relocation. It is 100% reproducible on my board.

This is what I am concerned about: this hang causes the board to brick
and can no
longer be recovered since it has the fuse programmed to close the device, right?

Re: [PATCH 0/2] imx93_var_som: Enable AHAB support

[Mathieu Othacehe]

> This is what I am concerned about: this hang causes the board to brick
> and can no
> longer be recovered since it has the fuse programmed to close the device, right?

Once the board is closed you can only boot from signed images. If the
signed image is not working (hanging during relocation for instance),
then you can always boot from a new one. All the interfaces: SD-card,
UART, USB are still usable.

I have tried many u-boot versions on my closed board until I had
something working. So, no you do not end-up with a brick unless you
cannot sign your image properly anymore.

Or maybe I missed your point?

Thanks,

Mathieu

Re: [PATCH 0/2] imx93_var_som: Enable AHAB support

[Fabio Estevam]

On Fri, Feb 9, 2024 at 11:25 AM Mathieu Othacehe <othacehe@gnu.org> wrote:

> Once the board is closed you can only boot from signed images. If the
> signed image is not working (hanging during relocation for instance),
> then you can always boot from a new one. All the interfaces: SD-card,
> UART, USB are still usable.
>
> I have tried many u-boot versions on my closed board until I had
> something working. So, no you do not end-up with a brick unless you
> cannot sign your image properly anymore.

Thanks for the clarification. I will apply your v2 soon.