* verdin-imx8mp: Ethernet does not load at boot
@ 2024-02-16 5:01 Sahaj Sarup
2024-02-16 7:29 ` Francesco Dolcini
0 siblings, 1 reply; 2+ messages in thread
From: Sahaj Sarup @ 2024-02-16 5:01 UTC (permalink / raw)
To: U-Boot Mailing List
Hi,
On a verdin-imx8mp platform I am now unable to use the ethernet ports.
My last build was from December
(8f5043ee6d378d7c10d947cf48b047a5954ef5b3) so it was working fine
then.
Boot log:
```
U-Boot SPL 2024.04-rc2-00002-gbef352dd57-dirty (Feb 16 2024 - 10:07:17 +0530)
Training FAILED
DDR configured as single rank
SEC0: RNG instantiated
Normal Boot
WDT: Started watchdog@30280000 with servicing every 1000ms (60s timeout)
Trying to boot from BOOTROM
Boot Stage: Primary boot
Find img info 0x4802ae00, size 1044
Need continue download 1024
NOTICE: Do not release JR0 to NS as it can be used by HAB
NOTICE: BL31: v2.10.0 (release):v2.10.0-44-g2e1e1664c
NOTICE: BL31: Built : 13:09:20, Dec 1 2023
U-Boot 2024.04-rc2-00002-gbef352dd57-dirty (Feb 16 2024 - 10:07:17 +0530)
CPU: Freescale i.MX8MP[8] rev1.1 1600 MHz (running at 1200 MHz)
CPU: Industrial temperature grade (-40C to 105C) at 36C
Reset cause: POR
DRAM: 4 GiB
Core: 171 devices, 28 uclasses, devicetree: separate
WDT: Started watchdog@30280000 with servicing every 1000ms (60s timeout)
MMC: FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... *** Warning - bad CRC, using default environment
In: serial@30880000
Out: serial@30880000
Err: serial@30880000
Model: Toradex Verdin iMX8M Plus WB on Verdin Development Board
SEC0: RNG instantiated
Setting variant to nonwifi
Net:
Error: ethernet@30bf0000 No valid MAC address found.
Can't find FEC0 clk rate: -22
Error: ethernet@30bf0000 No valid MAC address found.
Read MDIO failed...
Read MDIO failed...
Read MDIO failed...
Read MDIO failed...
Read MDIO failed...
Read MDIO failed...
Could not get PHY for mdio: addr 7
Read MDIO failed...
Read MDIO failed...
Read MDIO failed...
Read MDIO failed...
Read MDIO failed...
Read MDIO failed...
Could not get PHY for FEC1: addr 7
Error: ethernet@30bf0000 No valid MAC address found.
Can't find FEC0 clk rate: -22
Error: ethernet@30bf0000 No valid MAC address found.
Read MDIO failed...
Read MDIO failed...
Read MDIO failed...
Read MDIO failed...
Read MDIO failed...
Read MDIO failed...
Could not get PHY for mdio: addr 7
Read MDIO failed...
Read MDIO failed...
Read MDIO failed...
Read MDIO failed...
Read MDIO failed...
Read MDIO failed...
Could not get PHY for FEC1: addr 7
Error: ethernet@30bf0000 No valid MAC address found.
Error: ethernet@30bf0000 No valid MAC address found.
No ethernet found.
Hit any key to stop autoboot: 0
```
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: verdin-imx8mp: Ethernet does not load at boot
2024-02-16 5:01 verdin-imx8mp: Ethernet does not load at boot Sahaj Sarup
@ 2024-02-16 7:29 ` Francesco Dolcini
0 siblings, 0 replies; 2+ messages in thread
From: Francesco Dolcini @ 2024-02-16 7:29 UTC (permalink / raw)
To: Sahaj Sarup; +Cc: U-Boot Mailing List
On Fri, Feb 16, 2024 at 10:31:20AM +0530, Sahaj Sarup wrote:
> On a verdin-imx8mp platform I am now unable to use the ethernet ports.
I believe it's a known regression, we are currently working on a fix.
See https://lore.kernel.org/all/e40ed93bd8f371ec56b8fc451dcb458f3ce6dcba.camel@toradex.com/
Francesco
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2024-02-16 7:29 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-02-16 5:01 verdin-imx8mp: Ethernet does not load at boot Sahaj Sarup
2024-02-16 7:29 ` Francesco Dolcini
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox