public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: "Marek Behún" <kabel@kernel.org>
To: Stefan Roese <sr@denx.de>
Cc: u-boot@lists.denx.de, "Marek Behún" <kabel@kernel.org>
Subject: [PATCH u-boot-mvebu 1/4] arm: mvebu: turris_omnia: Refactor MCU status and features reading
Date: Mon,  4 Mar 2024 16:21:45 +0100	[thread overview]
Message-ID: <20240304152148.3847-2-kabel@kernel.org> (raw)
In-Reply-To: <20240304152148.3847-1-kabel@kernel.org>

Refactor MCU status word and MCU firmware features reading to make it
simpler to use.

Signed-off-by: Marek Behún <kabel@kernel.org>
---
 board/CZ.NIC/turris_omnia/turris_omnia.c | 81 ++++++++++++++++--------
 1 file changed, 53 insertions(+), 28 deletions(-)

diff --git a/board/CZ.NIC/turris_omnia/turris_omnia.c b/board/CZ.NIC/turris_omnia/turris_omnia.c
index adeb69a205b..b285e959d06 100644
--- a/board/CZ.NIC/turris_omnia/turris_omnia.c
+++ b/board/CZ.NIC/turris_omnia/turris_omnia.c
@@ -172,6 +172,48 @@ static int omnia_mcu_write(u8 cmd, const void *buf, int len)
 	return dm_i2c_write(chip, cmd, buf, len);
 }
 
+static int omnia_mcu_get_sts_and_features(u16 *psts, u16 *pfeatures)
+{
+	u16 sts;
+	int ret;
+
+	ret = omnia_mcu_read(CMD_GET_STATUS_WORD, &sts, sizeof(sts));
+	if (ret)
+		return ret;
+
+	if (psts)
+		*psts = sts;
+
+	if (!pfeatures)
+		return 0;
+
+	if (sts & STS_FEATURES_SUPPORTED) {
+		ret = omnia_mcu_read(CMD_GET_FEATURES, pfeatures,
+				     sizeof(*pfeatures));
+		if (ret)
+			return ret;
+	} else {
+		*pfeatures = 0;
+	}
+
+	return 0;
+}
+
+static int omnia_mcu_get_sts(u16 *sts)
+{
+	return omnia_mcu_get_sts_and_features(sts, NULL);
+}
+
+static bool omnia_mcu_has_feature(u16 feature)
+{
+	u16 features;
+
+	if (omnia_mcu_get_sts_and_features(NULL, &features))
+		return false;
+
+	return feature & features;
+}
+
 static void enable_a385_watchdog(unsigned int timeout_minutes)
 {
 	struct sar_freq_modes sar_freq;
@@ -249,7 +291,7 @@ static bool omnia_detect_sata(const char *msata_slot)
 		}
 	}
 
-	ret = omnia_mcu_read(CMD_GET_STATUS_WORD, &stsword, sizeof(stsword));
+	ret = omnia_mcu_get_sts(&stsword);
 	if (ret) {
 		printf("omnia_mcu_read failed: %i, defaulting to MiniPCIe card\n",
 		       ret);
@@ -405,20 +447,17 @@ static const char * const omnia_get_mcu_type(void)
 		[STS_MCU_TYPE_MKL]   = "MKL (with peripheral resets)",
 		[STS_MCU_TYPE_UNKN]  = "unknown (with peripheral resets)",
 	};
-	u16 stsword, features;
+	u16 sts;
 	int ret;
 
-	ret = omnia_mcu_read(CMD_GET_STATUS_WORD, &stsword, sizeof(stsword));
+	ret = omnia_mcu_get_sts(&sts);
 	if (ret)
 		return "unknown";
 
-	if (stsword & STS_FEATURES_SUPPORTED) {
-		ret = omnia_mcu_read(CMD_GET_FEATURES, &features, sizeof(features));
-		if (ret == 0 && (features & FEAT_PERIPH_MCU))
-			return mcu_types_with_perip_resets[stsword & STS_MCU_TYPE_MASK];
-	}
+	if (omnia_mcu_has_feature(FEAT_PERIPH_MCU))
+		return mcu_types_with_perip_resets[sts & STS_MCU_TYPE_MASK];
 
-	return mcu_types[stsword & STS_MCU_TYPE_MASK];
+	return mcu_types[sts & STS_MCU_TYPE_MASK];
 }
 
 static const char * const omnia_get_mcu_version(void)
@@ -695,9 +734,6 @@ int board_early_init_f(void)
 
 void spl_board_init(void)
 {
-	u16 val;
-	int ret;
-
 	/*
 	 * If booting from UART, disable MCU watchdog in SPL, since uploading
 	 * U-Boot proper can take too much time and trigger it. Instead enable
@@ -714,12 +750,8 @@ void spl_board_init(void)
 	 * resets then LAN eth switch is initialized automatically by bootstrap
 	 * pins when A385 is released from the reset.
 	 */
-	ret = omnia_mcu_read(CMD_GET_STATUS_WORD, &val, sizeof(val));
-	if (ret == 0 && (val & STS_FEATURES_SUPPORTED)) {
-		ret = omnia_mcu_read(CMD_GET_FEATURES, &val, sizeof(val));
-		if (ret == 0 && (val & FEAT_PERIPH_MCU))
-			initialize_switch();
-	}
+	if (omnia_mcu_has_feature(FEAT_PERIPH_MCU))
+		initialize_switch();
 }
 
 #if IS_ENABLED(CONFIG_OF_BOARD_FIXUP) || IS_ENABLED(CONFIG_OF_BOARD_SETUP)
@@ -919,16 +951,9 @@ static int fixup_mcu_gpio_in_eth_wan_node(void *blob)
 #if IS_ENABLED(CONFIG_OF_BOARD_FIXUP)
 int board_fix_fdt(void *blob)
 {
-	u16 val;
-	int ret;
-
-	ret = omnia_mcu_read(CMD_GET_STATUS_WORD, &val, sizeof(val));
-	if (ret == 0 && (val & STS_FEATURES_SUPPORTED)) {
-		ret = omnia_mcu_read(CMD_GET_FEATURES, &val, sizeof(val));
-		if (ret == 0 && (val & FEAT_PERIPH_MCU)) {
-			fixup_mcu_gpio_in_pcie_nodes(blob);
-			fixup_mcu_gpio_in_eth_wan_node(blob);
-		}
+	if (omnia_mcu_has_feature(FEAT_PERIPH_MCU)) {
+		fixup_mcu_gpio_in_pcie_nodes(blob);
+		fixup_mcu_gpio_in_eth_wan_node(blob);
 	}
 
 	fixup_msata_port_nodes(blob);
-- 
2.43.0


  reply	other threads:[~2024-03-04 15:22 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-03-04 15:21 [PATCH u-boot-mvebu 0/4] Turris Omnia - New board revision support Marek Behún
2024-03-04 15:21 ` Marek Behún [this message]
2024-03-04 15:21 ` [PATCH u-boot-mvebu 2/4] arm: mvebu: turris_omnia: Implement getting board information from MCU Marek Behún
2024-03-04 15:21 ` [PATCH u-boot-mvebu 3/4] arm: mvebu: turris_omnia: Print board ECDSA public key if available Marek Behún
2024-03-04 15:21 ` [PATCH u-boot-mvebu 4/4] arm: mvebu: turris_omnia: Disable Atmel SHA node if not present Marek Behún
2024-03-23 16:58 ` [PATCH u-boot-mvebu 0/4] Turris Omnia - New board revision support Marek Behún

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240304152148.3847-2-kabel@kernel.org \
    --to=kabel@kernel.org \
    --cc=sr@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox