From: "Marek Behún" <kabel@kernel.org>
To: Stefan Roese <sr@denx.de>
Cc: u-boot@lists.denx.de, "Marek Behún" <kabel@kernel.org>
Subject: [PATCH u-boot-mvebu v2 08/18] arm: mvebu: spl: Do not build mvebu-reset in SPL
Date: Sat, 23 Mar 2024 19:07:01 +0100 [thread overview]
Message-ID: <20240323180711.5498-9-kabel@kernel.org> (raw)
In-Reply-To: <20240323180711.5498-1-kabel@kernel.org>
Commit 35e29e89a386 ("arm: mvebu: Implement simple mvebu-reset driver
for enabling/disabling PCIe ports") made it so that the mvebu reset
driver for enabling/disabling PCIe ports is build if CONFIG_DM_RESET is
enabled. This is because PCI_MVEBU depends on DM_RESET.
But the driver should not be built for SPL. Indeed the PCI_MVEBU driver
is not supported in SPL now, and so the mvebu-reset driver is not needed.
Signed-off-by: Marek Behún <kabel@kernel.org>
---
arch/arm/mach-mvebu/Makefile | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index 0584ed2be5..ef790d97fe 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -22,13 +22,14 @@ else # CONFIG_ARCH_KIRKWOOD
obj-y = cpu.o
obj-y += dram.o
obj-y += lowlevel.o
-obj-$(CONFIG_DM_RESET) += system-controller.o
ifndef CONFIG_SPL_BUILD
obj-$(CONFIG_ARMADA_375) += ../../../drivers/ddr/marvell/axp/xor.o
obj-$(CONFIG_ARMADA_38X) += ../../../drivers/ddr/marvell/a38x/xor.o
obj-$(CONFIG_ARMADA_XP) += ../../../drivers/ddr/marvell/axp/xor.o
obj-$(CONFIG_ARMADA_MSYS) += ../../../drivers/ddr/marvell/axp/xor.o
+obj-$(CONFIG_DM_RESET) += system-controller.o
+
ifdef CONFIG_ARMADA_38X
obj-$(CONFIG_MVEBU_EFUSE) += efuse.o
endif
--
2.43.2
next prev parent reply other threads:[~2024-03-23 18:08 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-23 18:06 [PATCH u-boot-mvebu v2 00/18] Turris Omnia - New board revision support Marek Behún
2024-03-23 18:06 ` [PATCH u-boot-mvebu v2 01/18] arm: mvebu: turris_omnia: Enable LTO by default on Turris Omnia Marek Behún
2024-03-23 18:06 ` [PATCH u-boot-mvebu v2 02/18] arm: mvebu: turris_omnia: Add header containing MCU command interface and use it Marek Behún
2024-03-23 18:06 ` [PATCH u-boot-mvebu v2 03/18] arm: mvebu: turris_{omnia, mox}: Don't print model two times Marek Behún
2024-03-23 18:06 ` [PATCH u-boot-mvebu v2 04/18] arm: mvebu: turris_omnia: Update MCU status and features reading Marek Behún
2024-03-23 18:06 ` [PATCH u-boot-mvebu v2 05/18] arm: mvebu: turris_omnia: Implement getting board information from MCU Marek Behún
2024-03-23 18:06 ` [PATCH u-boot-mvebu v2 06/18] arm: mvebu: turris_omnia: Print board ECDSA public key if available Marek Behún
2024-03-25 17:37 ` Marek Behún
2024-03-23 18:07 ` [PATCH u-boot-mvebu v2 07/18] arm: mvebu: turris_omnia: Disable Atmel SHA node if not present Marek Behún
2024-03-23 18:07 ` Marek Behún [this message]
2024-03-23 18:07 ` [PATCH u-boot-mvebu v2 09/18] arm: mvebu: system-controller: Rework to use UCLASS_SYSCON Marek Behún
2024-03-23 18:07 ` [PATCH u-boot-mvebu v2 10/18] arm: mvebu: system-controller: Select mvebu-reset if DM_RESET && PCI_MVEBU Marek Behún
2024-03-23 18:07 ` [PATCH u-boot-mvebu v2 11/18] arm: mvebu: system-controller: Add support for SYSRESET Marek Behún
2024-03-23 18:07 ` [PATCH u-boot-mvebu v2 12/18] gpio: turris_omnia_mcu: Use byteorder conversion functions Marek Behún
2024-03-23 18:07 ` [PATCH u-boot-mvebu v2 13/18] gpio: turris_omnia_mcu: Update firmware features reading Marek Behún
2024-03-23 18:07 ` [PATCH u-boot-mvebu v2 14/18] gpio: turris_omnia_mcu: Add support for system power off via sysreset Marek Behún
2024-03-23 18:07 ` [PATCH u-boot-mvebu v2 15/18] arm: mvebu: turris_omnia: Enable poweroff command via sysreset in defconfig Marek Behún
2024-03-23 18:07 ` [PATCH u-boot-mvebu v2 16/18] cmd: rng: Print "Abort" on -EINTR Marek Behún
2024-03-23 18:30 ` Heinrich Schuchardt
2024-03-23 18:53 ` Marek Behún
2024-03-23 18:07 ` [PATCH u-boot-mvebu v2 17/18] misc: turris_omnia_mcu: Add support for rng provided by MCU Marek Behún
2024-03-23 18:07 ` [PATCH u-boot-mvebu v2 18/18] arm: mvebu: turris_omnia: Enable rng command in defconfig Marek Behún
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240323180711.5498-9-kabel@kernel.org \
--to=kabel@kernel.org \
--cc=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox