From: "Marek Behún" <kabel@kernel.org>
To: Stefan Roese <sr@denx.de>
Cc: u-boot@lists.denx.de, "Marek Behún" <kabel@kernel.org>
Subject: [PATCH u-boot-mvebu v3 10/18] arm: mvebu: system-controller: Select mvebu-reset if DM_RESET && PCI_MVEBU
Date: Wed, 27 Mar 2024 17:23:47 +0100 [thread overview]
Message-ID: <20240327162355.24584-11-kabel@kernel.org> (raw)
In-Reply-To: <20240327162355.24584-1-kabel@kernel.org>
The mvebu-reset driver is only needed by the mvebu PCIe driver, but
currently it is automatically selected if DM_RESET is enabled. Add the
condition of PCI_MVEBU also being enabled for mvebu-reset to be
selected.
Signed-off-by: Marek Behún <kabel@kernel.org>
---
arch/arm/mach-mvebu/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index 62a2bc5958..623432a60e 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -18,7 +18,7 @@ config ARMADA_32BIT
select TOOLS_KWBIMAGE if SPL
select SPL_SYS_NO_VECTOR_TABLE if SPL
select ARCH_VERY_EARLY_INIT
- select ARMADA_32BIT_SYSCON_RESET if DM_RESET
+ select ARMADA_32BIT_SYSCON_RESET if DM_RESET && PCI_MVEBU
# ARMv7 SoCs...
config ARMADA_375
--
2.43.2
next prev parent reply other threads:[~2024-03-27 16:26 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-27 16:23 [PATCH u-boot-mvebu v3 00/18] Turris Omnia - New board revision support Marek Behún
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 01/18] arm: mvebu: turris_omnia: Enable LTO by default on Turris Omnia Marek Behún
2024-03-28 9:53 ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 02/18] arm: mvebu: turris_omnia: Add header containing MCU command interface and use it Marek Behún
2024-03-28 9:53 ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 03/18] arm: mvebu: turris_{omnia, mox}: Don't print model two times Marek Behún
2024-03-28 9:53 ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 04/18] arm: mvebu: turris_omnia: Update MCU status and features reading Marek Behún
2024-03-28 9:54 ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 05/18] arm: mvebu: turris_omnia: Implement getting board information from MCU Marek Behún
2024-03-28 9:56 ` Stefan Roese
2024-03-28 11:17 ` Marek Behún
2024-03-28 12:53 ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 06/18] arm: mvebu: turris_omnia: Print board ECDSA public key if available Marek Behún
2024-03-28 9:56 ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 07/18] arm: mvebu: turris_omnia: Disable Atmel SHA node if not present Marek Behún
2024-03-28 9:56 ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 08/18] arm: mvebu: spl: Do not build mvebu-reset in SPL Marek Behún
2024-03-28 9:58 ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 09/18] arm: mvebu: system-controller: Rework to use UCLASS_SYSCON Marek Behún
2024-03-28 9:59 ` Stefan Roese
2024-03-27 16:23 ` Marek Behún [this message]
2024-03-28 10:00 ` [PATCH u-boot-mvebu v3 10/18] arm: mvebu: system-controller: Select mvebu-reset if DM_RESET && PCI_MVEBU Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 11/18] arm: mvebu: system-controller: Add support for SYSRESET Marek Behún
2024-03-28 10:04 ` Stefan Roese
2024-03-28 11:21 ` Marek Behún
2024-03-28 13:01 ` Stefan Roese
2024-03-28 14:18 ` Marek Behún
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 12/18] gpio: turris_omnia_mcu: Use byteorder conversion functions Marek Behún
2024-03-28 10:12 ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 13/18] gpio: turris_omnia_mcu: Update firmware features reading Marek Behún
2024-03-28 10:15 ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 14/18] gpio: turris_omnia_mcu: Add support for system power off via sysreset Marek Behún
2024-03-28 10:18 ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 15/18] arm: mvebu: turris_omnia: Enable poweroff command via sysreset in defconfig Marek Behún
2024-03-28 10:18 ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 16/18] cmd: rng: Print "Abort" on -EINTR Marek Behún
2024-03-28 10:22 ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 17/18] misc: turris_omnia_mcu: Add support for rng provided by MCU Marek Behún
2024-03-28 10:25 ` Stefan Roese
2024-03-27 16:23 ` [PATCH u-boot-mvebu v3 18/18] arm: mvebu: turris_omnia: Enable rng command in defconfig Marek Behún
2024-03-28 10:25 ` Stefan Roese
2024-04-04 6:38 ` [PATCH u-boot-mvebu v3 00/18] Turris Omnia - New board revision support Stefan Roese
2024-04-04 7:38 ` Marek Behún
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240327162355.24584-11-kabel@kernel.org \
--to=kabel@kernel.org \
--cc=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox